Netdev Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH v6 1/2] bus: mhi: Add mhi_queue_is_full function
@ 2020-10-16  9:20 Loic Poulain
  2020-10-16  9:20 ` [PATCH v6 2/3] net: Add mhi-net driver Loic Poulain
  2020-10-23  3:06 ` [PATCH v6 1/2] bus: mhi: Add mhi_queue_is_full function Hemant Kumar
  0 siblings, 2 replies; 9+ messages in thread
From: Loic Poulain @ 2020-10-16  9:20 UTC (permalink / raw)
  To: davem, kuba
  Cc: netdev, hemantk, manivannan.sadhasivam, eric.dumazet, Loic Poulain

This function can be used by client driver to determine whether it's
possible to queue new elements in a channel ring.

Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
---
 v1->v5: This change is not part of the series
 v6: add this patch to the series

 drivers/bus/mhi/core/main.c | 15 +++++++++++++--
 include/linux/mhi.h         |  7 +++++++
 2 files changed, 20 insertions(+), 2 deletions(-)

diff --git a/drivers/bus/mhi/core/main.c b/drivers/bus/mhi/core/main.c
index a588eac..44aa11f 100644
--- a/drivers/bus/mhi/core/main.c
+++ b/drivers/bus/mhi/core/main.c
@@ -943,8 +943,8 @@ void mhi_ctrl_ev_task(unsigned long data)
 	}
 }
 
-static bool mhi_is_ring_full(struct mhi_controller *mhi_cntrl,
-			     struct mhi_ring *ring)
+static inline bool mhi_is_ring_full(struct mhi_controller *mhi_cntrl,
+				    struct mhi_ring *ring)
 {
 	void *tmp = ring->wp + ring->el_size;
 
@@ -1173,6 +1173,17 @@ int mhi_queue_buf(struct mhi_device *mhi_dev, enum dma_data_direction dir,
 }
 EXPORT_SYMBOL_GPL(mhi_queue_buf);
 
+bool mhi_queue_is_full(struct mhi_device *mhi_dev, enum dma_data_direction dir)
+{
+	struct mhi_controller *mhi_cntrl = mhi_dev->mhi_cntrl;
+	struct mhi_chan *mhi_chan = (dir == DMA_TO_DEVICE) ?
+					mhi_dev->ul_chan : mhi_dev->dl_chan;
+	struct mhi_ring *tre_ring = &mhi_chan->tre_ring;
+
+	return mhi_is_ring_full(mhi_cntrl, tre_ring);
+}
+EXPORT_SYMBOL_GPL(mhi_queue_is_full);
+
 int mhi_send_cmd(struct mhi_controller *mhi_cntrl,
 		 struct mhi_chan *mhi_chan,
 		 enum mhi_cmd_type cmd)
diff --git a/include/linux/mhi.h b/include/linux/mhi.h
index 9d67e75..f72c3a4 100644
--- a/include/linux/mhi.h
+++ b/include/linux/mhi.h
@@ -745,4 +745,11 @@ int mhi_queue_buf(struct mhi_device *mhi_dev, enum dma_data_direction dir,
 int mhi_queue_skb(struct mhi_device *mhi_dev, enum dma_data_direction dir,
 		  struct sk_buff *skb, size_t len, enum mhi_flags mflags);
 
+/**
+ * mhi_queue_is_full - Determine whether queueing new elements is possible
+ * @mhi_dev: Device associated with the channels
+ * @dir: DMA direction for the channel
+ */
+bool mhi_queue_is_full(struct mhi_device *mhi_dev, enum dma_data_direction dir);
+
 #endif /* _MHI_H_ */
-- 
2.7.4


^ permalink raw reply	[flat|nested] 9+ messages in thread

* [PATCH v6 2/3] net: Add mhi-net driver
  2020-10-16  9:20 [PATCH v6 1/2] bus: mhi: Add mhi_queue_is_full function Loic Poulain
@ 2020-10-16  9:20 ` Loic Poulain
  2020-10-16 18:06   ` Jakub Kicinski
  2020-10-17  0:52   ` Hemant Kumar
  2020-10-23  3:06 ` [PATCH v6 1/2] bus: mhi: Add mhi_queue_is_full function Hemant Kumar
  1 sibling, 2 replies; 9+ messages in thread
From: Loic Poulain @ 2020-10-16  9:20 UTC (permalink / raw)
  To: davem, kuba
  Cc: netdev, hemantk, manivannan.sadhasivam, eric.dumazet, Loic Poulain

This patch adds a new network driver implementing MHI transport for
network packets. Packets can be in any format, though QMAP (rmnet)
is the usual protocol (flow control + PDN mux).

It support two MHI devices, IP_HW0 which is, the path to the IPA
(IP accelerator) on qcom modem, And IP_SW0 which is the software
driven IP path (to modem CPU).

Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
---

  v2: - rebase on net-next
      - remove useless skb_linearize
      - check error type on mhi_queue return
      - rate limited errors
      - Schedule RX refill only on 'low' buf level
      - SET_NETDEV_DEV in probe
      - reorder device remove sequence
  v3: - Stop channels on net_register error
      - Remove useles parentheses
      - Add driver .owner
  v4: - prevent potential cpu hog in rx-refill loop
      - Access mtu via READ_ONCE
  v5: - Fix access to u64 stats 
  v6: - Stop TX queue earlier if queue is full
      - Preventing 'abnormal' NETDEV_TX_BUSY path

 drivers/net/Kconfig   |   7 ++
 drivers/net/Makefile  |   1 +
 drivers/net/mhi_net.c | 312 ++++++++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 320 insertions(+)
 create mode 100644 drivers/net/mhi_net.c

diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 1368d1d..11a6357 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -426,6 +426,13 @@ config VSOCKMON
 	  mostly intended for developers or support to debug vsock issues. If
 	  unsure, say N.
 
+config MHI_NET
+	tristate "MHI network driver"
+	depends on MHI_BUS
+	help
+	  This is the network driver for MHI.  It can be used with
+	  QCOM based WWAN modems (like SDX55).  Say Y or M.
+
 endif # NET_CORE
 
 config SUNGEM_PHY
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 94b6080..8312037 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -34,6 +34,7 @@ obj-$(CONFIG_GTP) += gtp.o
 obj-$(CONFIG_NLMON) += nlmon.o
 obj-$(CONFIG_NET_VRF) += vrf.o
 obj-$(CONFIG_VSOCKMON) += vsockmon.o
+obj-$(CONFIG_MHI_NET) += mhi_net.o
 
 #
 # Networking Drivers
diff --git a/drivers/net/mhi_net.c b/drivers/net/mhi_net.c
new file mode 100644
index 0000000..9c93db1
--- /dev/null
+++ b/drivers/net/mhi_net.c
@@ -0,0 +1,312 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/* MHI Network driver - Network over MHI
+ *
+ * Copyright (C) 2020 Linaro Ltd <loic.poulain@linaro.org>
+ */
+
+#include <linux/if_arp.h>
+#include <linux/mhi.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <linux/skbuff.h>
+#include <linux/u64_stats_sync.h>
+
+#define MIN_MTU		ETH_MIN_MTU
+#define MAX_MTU		0xffff
+#define DEFAULT_MTU	8192
+
+struct mhi_net_stats {
+	u64_stats_t rx_packets;
+	u64_stats_t rx_bytes;
+	u64_stats_t rx_errors;
+	u64_stats_t rx_dropped;
+	u64_stats_t tx_packets;
+	u64_stats_t tx_bytes;
+	u64_stats_t tx_errors;
+	u64_stats_t tx_dropped;
+	atomic_t rx_queued;
+	struct u64_stats_sync tx_syncp;
+	struct u64_stats_sync rx_syncp;
+};
+
+struct mhi_net_dev {
+	struct mhi_device *mdev;
+	struct net_device *ndev;
+	struct delayed_work rx_refill;
+	struct mhi_net_stats stats;
+	u32 rx_queue_sz;
+};
+
+static int mhi_ndo_open(struct net_device *ndev)
+{
+	struct mhi_net_dev *mhi_netdev = netdev_priv(ndev);
+
+	/* Feed the rx buffer pool */
+	schedule_delayed_work(&mhi_netdev->rx_refill, 0);
+
+	/* Carrier is established via out-of-band channel (e.g. qmi) */
+	netif_carrier_on(ndev);
+
+	netif_start_queue(ndev);
+
+	return 0;
+}
+
+static int mhi_ndo_stop(struct net_device *ndev)
+{
+	struct mhi_net_dev *mhi_netdev = netdev_priv(ndev);
+
+	netif_stop_queue(ndev);
+	netif_carrier_off(ndev);
+	cancel_delayed_work_sync(&mhi_netdev->rx_refill);
+
+	return 0;
+}
+
+static int mhi_ndo_xmit(struct sk_buff *skb, struct net_device *ndev)
+{
+	struct mhi_net_dev *mhi_netdev = netdev_priv(ndev);
+	struct mhi_device *mdev = mhi_netdev->mdev;
+	int err;
+
+	/* mhi_queue_skb is not thread-safe, but xmit is serialized by the
+	 * network core. Once MHI core will be thread save, migrate to
+	 * NETIF_F_LLTX support.
+	 */
+	err = mhi_queue_skb(mdev, DMA_TO_DEVICE, skb, skb->len, MHI_EOT);
+	if (unlikely(err)) {
+		net_err_ratelimited("%s: Failed to queue TX buf (%d)\n",
+				    ndev->name, err);
+
+		u64_stats_update_begin(&mhi_netdev->stats.tx_syncp);
+		u64_stats_inc(&mhi_netdev->stats.tx_dropped);
+		u64_stats_update_end(&mhi_netdev->stats.tx_syncp);
+
+		/* drop the packet */
+		kfree_skb(skb);
+	}
+
+	if (mhi_queue_is_full(mdev, DMA_TO_DEVICE))
+		netif_stop_queue(ndev);
+
+	return NETDEV_TX_OK;
+}
+
+static void mhi_ndo_get_stats64(struct net_device *ndev,
+				struct rtnl_link_stats64 *stats)
+{
+	struct mhi_net_dev *mhi_netdev = netdev_priv(ndev);
+	unsigned int start;
+
+	do {
+		start = u64_stats_fetch_begin_irq(&mhi_netdev->stats.rx_syncp);
+		stats->rx_packets = u64_stats_read(&mhi_netdev->stats.rx_packets);
+		stats->rx_bytes = u64_stats_read(&mhi_netdev->stats.rx_bytes);
+		stats->rx_errors = u64_stats_read(&mhi_netdev->stats.rx_errors);
+		stats->rx_dropped = u64_stats_read(&mhi_netdev->stats.rx_dropped);
+	} while (u64_stats_fetch_retry_irq(&mhi_netdev->stats.rx_syncp, start));
+
+	do {
+		start = u64_stats_fetch_begin_irq(&mhi_netdev->stats.tx_syncp);
+		stats->tx_packets = u64_stats_read(&mhi_netdev->stats.tx_packets);
+		stats->tx_bytes = u64_stats_read(&mhi_netdev->stats.tx_bytes);
+		stats->tx_errors = u64_stats_read(&mhi_netdev->stats.tx_errors);
+		stats->tx_dropped = u64_stats_read(&mhi_netdev->stats.tx_dropped);
+	} while (u64_stats_fetch_retry_irq(&mhi_netdev->stats.tx_syncp, start));
+}
+
+static const struct net_device_ops mhi_netdev_ops = {
+	.ndo_open               = mhi_ndo_open,
+	.ndo_stop               = mhi_ndo_stop,
+	.ndo_start_xmit         = mhi_ndo_xmit,
+	.ndo_get_stats64	= mhi_ndo_get_stats64,
+};
+
+static void mhi_net_setup(struct net_device *ndev)
+{
+	ndev->header_ops = NULL;  /* No header */
+	ndev->type = ARPHRD_NONE; /* QMAP... */
+	ndev->hard_header_len = 0;
+	ndev->addr_len = 0;
+	ndev->flags = IFF_POINTOPOINT | IFF_NOARP;
+	ndev->netdev_ops = &mhi_netdev_ops;
+	ndev->mtu = DEFAULT_MTU;
+	ndev->min_mtu = MIN_MTU;
+	ndev->max_mtu = MAX_MTU;
+	ndev->tx_queue_len = 1000;
+}
+
+static void mhi_net_dl_callback(struct mhi_device *mhi_dev,
+				struct mhi_result *mhi_res)
+{
+	struct mhi_net_dev *mhi_netdev = dev_get_drvdata(&mhi_dev->dev);
+	struct sk_buff *skb = mhi_res->buf_addr;
+	int remaining;
+
+	remaining = atomic_dec_return(&mhi_netdev->stats.rx_queued);
+
+	if (unlikely(mhi_res->transaction_status)) {
+		u64_stats_update_begin(&mhi_netdev->stats.rx_syncp);
+		u64_stats_inc(&mhi_netdev->stats.rx_errors);
+		u64_stats_update_end(&mhi_netdev->stats.rx_syncp);
+
+		kfree_skb(skb);
+	} else {
+		u64_stats_update_begin(&mhi_netdev->stats.rx_syncp);
+		u64_stats_inc(&mhi_netdev->stats.rx_packets);
+		u64_stats_add(&mhi_netdev->stats.rx_bytes, mhi_res->bytes_xferd);
+		u64_stats_update_end(&mhi_netdev->stats.rx_syncp);
+
+		skb->protocol = htons(ETH_P_MAP);
+		skb_put(skb, mhi_res->bytes_xferd);
+		netif_rx(skb);
+	}
+
+	/* Refill if RX buffers queue becomes low */
+	if (remaining <= mhi_netdev->rx_queue_sz / 2)
+		schedule_delayed_work(&mhi_netdev->rx_refill, 0);
+}
+
+static void mhi_net_ul_callback(struct mhi_device *mhi_dev,
+				struct mhi_result *mhi_res)
+{
+	struct mhi_net_dev *mhi_netdev = dev_get_drvdata(&mhi_dev->dev);
+	struct net_device *ndev = mhi_netdev->ndev;
+	struct sk_buff *skb = mhi_res->buf_addr;
+
+	/* Hardware has consumed the buffer, so free the skb (which is not
+	 * freed by the MHI stack) and perform accounting.
+	 */
+	consume_skb(skb);
+
+	u64_stats_update_begin(&mhi_netdev->stats.tx_syncp);
+	if (unlikely(mhi_res->transaction_status)) {
+		u64_stats_inc(&mhi_netdev->stats.tx_errors);
+	} else {
+		u64_stats_inc(&mhi_netdev->stats.tx_packets);
+		u64_stats_add(&mhi_netdev->stats.tx_bytes, mhi_res->bytes_xferd);
+	}
+	u64_stats_update_end(&mhi_netdev->stats.tx_syncp);
+
+	if (netif_queue_stopped(ndev))
+		netif_wake_queue(ndev);
+}
+
+static void mhi_net_rx_refill_work(struct work_struct *work)
+{
+	struct mhi_net_dev *mhi_netdev = container_of(work, struct mhi_net_dev,
+						      rx_refill.work);
+	struct net_device *ndev = mhi_netdev->ndev;
+	struct mhi_device *mdev = mhi_netdev->mdev;
+	int size = READ_ONCE(ndev->mtu);
+	struct sk_buff *skb;
+	int err;
+
+	do {
+		skb = netdev_alloc_skb(ndev, size);
+		if (unlikely(!skb))
+			break;
+
+		err = mhi_queue_skb(mdev, DMA_FROM_DEVICE, skb, size, MHI_EOT);
+		if (err) {
+			if (unlikely(err != -ENOMEM))
+				net_err_ratelimited("%s: Failed to queue RX buf (%d)\n",
+						    ndev->name, err);
+			kfree_skb(skb);
+			break;
+		}
+
+		atomic_inc(&mhi_netdev->stats.rx_queued);
+
+		/* Do not hog the CPU if rx buffers are completed faster than
+		 * queued (unlikely).
+		 */
+		cond_resched();
+	} while (1);
+
+	/* If we're still starved of rx buffers, reschedule latter */
+	if (unlikely(!atomic_read(&mhi_netdev->stats.rx_queued)))
+		schedule_delayed_work(&mhi_netdev->rx_refill, HZ / 2);
+}
+
+static int mhi_net_probe(struct mhi_device *mhi_dev,
+			 const struct mhi_device_id *id)
+{
+	const char *netname = (char *)id->driver_data;
+	struct mhi_net_dev *mhi_netdev;
+	struct net_device *ndev;
+	struct device *dev = &mhi_dev->dev;
+	int err;
+
+	ndev = alloc_netdev(sizeof(*mhi_netdev), netname, NET_NAME_PREDICTABLE,
+			    mhi_net_setup);
+	if (!ndev)
+		return -ENOMEM;
+
+	mhi_netdev = netdev_priv(ndev);
+	dev_set_drvdata(dev, mhi_netdev);
+	mhi_netdev->ndev = ndev;
+	mhi_netdev->mdev = mhi_dev;
+	SET_NETDEV_DEV(ndev, &mhi_dev->dev);
+
+	/* All MHI net channels have 128 ring elements (at least for now) */
+	mhi_netdev->rx_queue_sz = 128;
+
+	INIT_DELAYED_WORK(&mhi_netdev->rx_refill, mhi_net_rx_refill_work);
+	u64_stats_init(&mhi_netdev->stats.rx_syncp);
+	u64_stats_init(&mhi_netdev->stats.tx_syncp);
+
+	/* Start MHI channels */
+	err = mhi_prepare_for_transfer(mhi_dev);
+	if (err)
+		goto out_err;
+
+	err = register_netdev(ndev);
+	if (err) {
+		mhi_unprepare_from_transfer(mhi_dev);
+		goto out_err;
+	}
+
+	return 0;
+
+out_err:
+	free_netdev(ndev);
+	return err;
+}
+
+static void mhi_net_remove(struct mhi_device *mhi_dev)
+{
+	struct mhi_net_dev *mhi_netdev = dev_get_drvdata(&mhi_dev->dev);
+
+	unregister_netdev(mhi_netdev->ndev);
+
+	mhi_unprepare_from_transfer(mhi_netdev->mdev);
+
+	free_netdev(mhi_netdev->ndev);
+}
+
+static const struct mhi_device_id mhi_net_id_table[] = {
+	{ .chan = "IP_HW0", .driver_data = (kernel_ulong_t)"mhi_hwip%d" },
+	{ .chan = "IP_SW0", .driver_data = (kernel_ulong_t)"mhi_swip%d" },
+	{}
+};
+MODULE_DEVICE_TABLE(mhi, mhi_net_id_table);
+
+static struct mhi_driver mhi_net_driver = {
+	.probe = mhi_net_probe,
+	.remove = mhi_net_remove,
+	.dl_xfer_cb = mhi_net_dl_callback,
+	.ul_xfer_cb = mhi_net_ul_callback,
+	.id_table = mhi_net_id_table,
+	.driver = {
+		.name = "mhi_net",
+		.owner = THIS_MODULE,
+	},
+};
+
+module_mhi_driver(mhi_net_driver);
+
+MODULE_AUTHOR("Loic Poulain <loic.poulain@linaro.org>");
+MODULE_DESCRIPTION("Network over MHI");
+MODULE_LICENSE("GPL v2");
-- 
2.7.4


^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: [PATCH v6 2/3] net: Add mhi-net driver
  2020-10-16  9:20 ` [PATCH v6 2/3] net: Add mhi-net driver Loic Poulain
@ 2020-10-16 18:06   ` Jakub Kicinski
  2020-10-17  0:52   ` Hemant Kumar
  1 sibling, 0 replies; 9+ messages in thread
From: Jakub Kicinski @ 2020-10-16 18:06 UTC (permalink / raw)
  To: Loic Poulain; +Cc: davem, netdev, hemantk, manivannan.sadhasivam, eric.dumazet

On Fri, 16 Oct 2020 11:20:07 +0200 Loic Poulain wrote:
> This patch adds a new network driver implementing MHI transport for
> network packets. Packets can be in any format, though QMAP (rmnet)
> is the usual protocol (flow control + PDN mux).
> 
> It support two MHI devices, IP_HW0 which is, the path to the IPA
> (IP accelerator) on qcom modem, And IP_SW0 which is the software
> driven IP path (to modem CPU).
> 
> Signed-off-by: Loic Poulain <loic.poulain@linaro.org>

Thanks for the changes, looks much nicer.

Unfortunately we already sent a PR for 5.10 and therefore net-next 
is closed for new drivers and features.

Please repost when in reopens after 5.10-rc1 is cut.

^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: [PATCH v6 2/3] net: Add mhi-net driver
  2020-10-16  9:20 ` [PATCH v6 2/3] net: Add mhi-net driver Loic Poulain
  2020-10-16 18:06   ` Jakub Kicinski
@ 2020-10-17  0:52   ` Hemant Kumar
  2020-10-17  1:37     ` Jakub Kicinski
  1 sibling, 1 reply; 9+ messages in thread
From: Hemant Kumar @ 2020-10-17  0:52 UTC (permalink / raw)
  To: Loic Poulain, davem, kuba; +Cc: netdev, manivannan.sadhasivam, eric.dumazet

Hi Loic,

On 10/16/20 2:20 AM, Loic Poulain wrote:
> This patch adds a new network driver implementing MHI transport for
> network packets. Packets can be in any format, though QMAP (rmnet)
> is the usual protocol (flow control + PDN mux).
> 
> It support two MHI devices, IP_HW0 which is, the path to the IPA
> (IP accelerator) on qcom modem, And IP_SW0 which is the software
> driven IP path (to modem CPU).
> 
> Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
> ---
> 
>    v2: - rebase on net-next
>        - remove useless skb_linearize
>        - check error type on mhi_queue return
>        - rate limited errors
>        - Schedule RX refill only on 'low' buf level
>        - SET_NETDEV_DEV in probe
>        - reorder device remove sequence
>    v3: - Stop channels on net_register error
>        - Remove useles parentheses
>        - Add driver .owner
>    v4: - prevent potential cpu hog in rx-refill loop
>        - Access mtu via READ_ONCE
>    v5: - Fix access to u64 stats
>    v6: - Stop TX queue earlier if queue is full
>        - Preventing 'abnormal' NETDEV_TX_BUSY path
> 
>   drivers/net/Kconfig   |   7 ++
>   drivers/net/Makefile  |   1 +
>   drivers/net/mhi_net.c | 312 ++++++++++++++++++++++++++++++++++++++++++++++++++
>   3 files changed, 320 insertions(+)
>   create mode 100644 drivers/net/mhi_net.c
> 
> diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
> index 1368d1d..11a6357 100644
> --- a/drivers/net/Kconfig
> +++ b/drivers/net/Kconfig
> @@ -426,6 +426,13 @@ config VSOCKMON
>   	  mostly intended for developers or support to debug vsock issues. If
>   	  unsure, say N.
>   
> +config MHI_NET
> +	tristate "MHI network driver"
> +	depends on MHI_BUS
> +	help
> +	  This is the network driver for MHI.  It can be used with
> +	  QCOM based WWAN modems (like SDX55).  Say Y or M.
> +
>   endif # NET_CORE
>   
>   config SUNGEM_PHY
> diff --git a/drivers/net/Makefile b/drivers/net/Makefile
> index 94b6080..8312037 100644
> --- a/drivers/net/Makefile
> +++ b/drivers/net/Makefile
> @@ -34,6 +34,7 @@ obj-$(CONFIG_GTP) += gtp.o
>   obj-$(CONFIG_NLMON) += nlmon.o
>   obj-$(CONFIG_NET_VRF) += vrf.o
>   obj-$(CONFIG_VSOCKMON) += vsockmon.o
> +obj-$(CONFIG_MHI_NET) += mhi_net.o
>   
>   #
>   # Networking Drivers
> diff --git a/drivers/net/mhi_net.c b/drivers/net/mhi_net.c
> new file mode 100644
> index 0000000..9c93db1
> --- /dev/null
> +++ b/drivers/net/mhi_net.c
> @@ -0,0 +1,312 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +/* MHI Network driver - Network over MHI
> + *
> + * Copyright (C) 2020 Linaro Ltd <loic.poulain@linaro.org>
> + */
> +
> +#include <linux/if_arp.h>
> +#include <linux/mhi.h>
> +#include <linux/mod_devicetable.h>
> +#include <linux/module.h>
> +#include <linux/netdevice.h>
> +#include <linux/skbuff.h>
> +#include <linux/u64_stats_sync.h>
> +
> +#define MIN_MTU		ETH_MIN_MTU
> +#define MAX_MTU		0xffff
uci driver patch series would take care of this :)
> +#define DEFAULT_MTU	8192
it would be good to pass this from driver data based on sw/hw channel
> +
> +struct mhi_net_stats {
> +	u64_stats_t rx_packets;
> +	u64_stats_t rx_bytes;
> +	u64_stats_t rx_errors;
> +	u64_stats_t rx_dropped;
> +	u64_stats_t tx_packets;
> +	u64_stats_t tx_bytes;
> +	u64_stats_t tx_errors;
> +	u64_stats_t tx_dropped;
> +	atomic_t rx_queued;
> +	struct u64_stats_sync tx_syncp;
> +	struct u64_stats_sync rx_syncp;
> +};
> +
> +struct mhi_net_dev {
> +	struct mhi_device *mdev;
> +	struct net_device *ndev;
> +	struct delayed_work rx_refill;
> +	struct mhi_net_stats stats;
> +	u32 rx_queue_sz;
> +};
> +
> +static int mhi_ndo_open(struct net_device *ndev)
> +{
> +	struct mhi_net_dev *mhi_netdev = netdev_priv(ndev);
> +
> +	/* Feed the rx buffer pool */
> +	schedule_delayed_work(&mhi_netdev->rx_refill, 0);
> +
> +	/* Carrier is established via out-of-band channel (e.g. qmi) */
> +	netif_carrier_on(ndev);
> +
> +	netif_start_queue(ndev);
> +
> +	return 0;
> +}
> +
> +static int mhi_ndo_stop(struct net_device *ndev)
> +{
> +	struct mhi_net_dev *mhi_netdev = netdev_priv(ndev);
> +
> +	netif_stop_queue(ndev);
> +	netif_carrier_off(ndev);
> +	cancel_delayed_work_sync(&mhi_netdev->rx_refill);
> +
> +	return 0;
> +}
> +
> +static int mhi_ndo_xmit(struct sk_buff *skb, struct net_device *ndev)
> +{
> +	struct mhi_net_dev *mhi_netdev = netdev_priv(ndev);
> +	struct mhi_device *mdev = mhi_netdev->mdev;
> +	int err;
> +
> +	/* mhi_queue_skb is not thread-safe, but xmit is serialized by the
> +	 * network core. Once MHI core will be thread save, migrate to
> +	 * NETIF_F_LLTX support.
> +	 */
> +	err = mhi_queue_skb(mdev, DMA_TO_DEVICE, skb, skb->len, MHI_EOT);
> +	if (unlikely(err)) {
> +		net_err_ratelimited("%s: Failed to queue TX buf (%d)\n",
> +				    ndev->name, err);
> +
> +		u64_stats_update_begin(&mhi_netdev->stats.tx_syncp);
> +		u64_stats_inc(&mhi_netdev->stats.tx_dropped);
> +		u64_stats_update_end(&mhi_netdev->stats.tx_syncp);
> +
> +		/* drop the packet */
> +		kfree_skb(skb);
> +	}
> +
> +	if (mhi_queue_is_full(mdev, DMA_TO_DEVICE))
> +		netif_stop_queue(ndev);
is it possible to enable flow control on tx queue if mhi_queue_skb 
returns non zero value and return NETDEV_TX_BUSY instead of dropping 
packet at MHI layer ? If this is possible you dont need to export new 
API as well.
> +
> +	return NETDEV_TX_OK;
> +}
> +
> +static void mhi_ndo_get_stats64(struct net_device *ndev,
> +				struct rtnl_link_stats64 *stats)
> +{
> +	struct mhi_net_dev *mhi_netdev = netdev_priv(ndev);
> +	unsigned int start;
> +
> +	do {
> +		start = u64_stats_fetch_begin_irq(&mhi_netdev->stats.rx_syncp);
> +		stats->rx_packets = u64_stats_read(&mhi_netdev->stats.rx_packets);
> +		stats->rx_bytes = u64_stats_read(&mhi_netdev->stats.rx_bytes);
> +		stats->rx_errors = u64_stats_read(&mhi_netdev->stats.rx_errors);
> +		stats->rx_dropped = u64_stats_read(&mhi_netdev->stats.rx_dropped);
> +	} while (u64_stats_fetch_retry_irq(&mhi_netdev->stats.rx_syncp, start));
> +
> +	do {
> +		start = u64_stats_fetch_begin_irq(&mhi_netdev->stats.tx_syncp);
> +		stats->tx_packets = u64_stats_read(&mhi_netdev->stats.tx_packets);
> +		stats->tx_bytes = u64_stats_read(&mhi_netdev->stats.tx_bytes);
> +		stats->tx_errors = u64_stats_read(&mhi_netdev->stats.tx_errors);
> +		stats->tx_dropped = u64_stats_read(&mhi_netdev->stats.tx_dropped);
> +	} while (u64_stats_fetch_retry_irq(&mhi_netdev->stats.tx_syncp, start));
> +}
> +
> +static const struct net_device_ops mhi_netdev_ops = {
> +	.ndo_open               = mhi_ndo_open,
> +	.ndo_stop               = mhi_ndo_stop,
> +	.ndo_start_xmit         = mhi_ndo_xmit,
> +	.ndo_get_stats64	= mhi_ndo_get_stats64,
> +};
> +
> +static void mhi_net_setup(struct net_device *ndev)
> +{
> +	ndev->header_ops = NULL;  /* No header */
> +	ndev->type = ARPHRD_NONE; /* QMAP... */
> +	ndev->hard_header_len = 0;
> +	ndev->addr_len = 0;
> +	ndev->flags = IFF_POINTOPOINT | IFF_NOARP;
> +	ndev->netdev_ops = &mhi_netdev_ops;
> +	ndev->mtu = DEFAULT_MTU;
> +	ndev->min_mtu = MIN_MTU;
> +	ndev->max_mtu = MAX_MTU;
> +	ndev->tx_queue_len = 1000;
some of the above parameters can go in to driver data specific to sw and 
hw channels.
> +}
> +
> +static void mhi_net_dl_callback(struct mhi_device *mhi_dev,
> +				struct mhi_result *mhi_res)
> +{
> +	struct mhi_net_dev *mhi_netdev = dev_get_drvdata(&mhi_dev->dev);
> +	struct sk_buff *skb = mhi_res->buf_addr;
> +	int remaining;
> +
> +	remaining = atomic_dec_return(&mhi_netdev->stats.rx_queued);
> +
> +	if (unlikely(mhi_res->transaction_status)) {
> +		u64_stats_update_begin(&mhi_netdev->stats.rx_syncp);
> +		u64_stats_inc(&mhi_netdev->stats.rx_errors);
> +		u64_stats_update_end(&mhi_netdev->stats.rx_syncp);
> +
> +		kfree_skb(skb);
> +	} else {
> +		u64_stats_update_begin(&mhi_netdev->stats.rx_syncp);
> +		u64_stats_inc(&mhi_netdev->stats.rx_packets);
> +		u64_stats_add(&mhi_netdev->stats.rx_bytes, mhi_res->bytes_xferd);
> +		u64_stats_update_end(&mhi_netdev->stats.rx_syncp);
> +
> +		skb->protocol = htons(ETH_P_MAP);
> +		skb_put(skb, mhi_res->bytes_xferd);
> +		netif_rx(skb);
> +	}
> +
> +	/* Refill if RX buffers queue becomes low */
> +	if (remaining <= mhi_netdev->rx_queue_sz / 2)
> +		schedule_delayed_work(&mhi_netdev->rx_refill, 0);
> +}
> +
> +static void mhi_net_ul_callback(struct mhi_device *mhi_dev,
> +				struct mhi_result *mhi_res)
> +{
> +	struct mhi_net_dev *mhi_netdev = dev_get_drvdata(&mhi_dev->dev);
> +	struct net_device *ndev = mhi_netdev->ndev;
> +	struct sk_buff *skb = mhi_res->buf_addr;
> +
> +	/* Hardware has consumed the buffer, so free the skb (which is not
> +	 * freed by the MHI stack) and perform accounting.
> +	 */
> +	consume_skb(skb);
> +
> +	u64_stats_update_begin(&mhi_netdev->stats.tx_syncp);
> +	if (unlikely(mhi_res->transaction_status)) {
> +		u64_stats_inc(&mhi_netdev->stats.tx_errors);
> +	} else {
> +		u64_stats_inc(&mhi_netdev->stats.tx_packets);
> +		u64_stats_add(&mhi_netdev->stats.tx_bytes, mhi_res->bytes_xferd);
> +	}
> +	u64_stats_update_end(&mhi_netdev->stats.tx_syncp);
> +
> +	if (netif_queue_stopped(ndev))
> +		netif_wake_queue(ndev);
> +}
> +
> +static void mhi_net_rx_refill_work(struct work_struct *work)
> +{
> +	struct mhi_net_dev *mhi_netdev = container_of(work, struct mhi_net_dev,
> +						      rx_refill.work);
> +	struct net_device *ndev = mhi_netdev->ndev;
> +	struct mhi_device *mdev = mhi_netdev->mdev;
> +	int size = READ_ONCE(ndev->mtu);
> +	struct sk_buff *skb;
> +	int err;
> +
> +	do {
> +		skb = netdev_alloc_skb(ndev, size);
> +		if (unlikely(!skb))
> +			break;
> +
> +		err = mhi_queue_skb(mdev, DMA_FROM_DEVICE, skb, size, MHI_EOT);
> +		if (err) {
> +			if (unlikely(err != -ENOMEM))
> +				net_err_ratelimited("%s: Failed to queue RX buf (%d)\n",
> +						    ndev->name, err);
> +			kfree_skb(skb);
> +			break;
> +		}
> +
> +		atomic_inc(&mhi_netdev->stats.rx_queued);
> +
> +		/* Do not hog the CPU if rx buffers are completed faster than
> +		 * queued (unlikely).
> +		 */
> +		cond_resched();
> +	} while (1);
> +
> +	/* If we're still starved of rx buffers, reschedule latter */
> +	if (unlikely(!atomic_read(&mhi_netdev->stats.rx_queued)))
> +		schedule_delayed_work(&mhi_netdev->rx_refill, HZ / 2);
> +}
> +
> +static int mhi_net_probe(struct mhi_device *mhi_dev,
> +			 const struct mhi_device_id *id)
> +{
> +	const char *netname = (char *)id->driver_data;
> +	struct mhi_net_dev *mhi_netdev;
> +	struct net_device *ndev;
> +	struct device *dev = &mhi_dev->dev;
> +	int err;
> +
> +	ndev = alloc_netdev(sizeof(*mhi_netdev), netname, NET_NAME_PREDICTABLE,
> +			    mhi_net_setup);
> +	if (!ndev)
> +		return -ENOMEM;
> +
> +	mhi_netdev = netdev_priv(ndev);
> +	dev_set_drvdata(dev, mhi_netdev);
> +	mhi_netdev->ndev = ndev;
> +	mhi_netdev->mdev = mhi_dev;
> +	SET_NETDEV_DEV(ndev, &mhi_dev->dev);
> +
> +	/* All MHI net channels have 128 ring elements (at least for now) */
> +	mhi_netdev->rx_queue_sz = 128;
Instead of hard coded value you can use mhi_get_free_desc_count() again 
from uci patch series :)
> +
> +	INIT_DELAYED_WORK(&mhi_netdev->rx_refill, mhi_net_rx_refill_work);
> +	u64_stats_init(&mhi_netdev->stats.rx_syncp);
> +	u64_stats_init(&mhi_netdev->stats.tx_syncp);
> +
> +	/* Start MHI channels */
> +	err = mhi_prepare_for_transfer(mhi_dev);
> +	if (err)
> +		goto out_err;
> +
> +	err = register_netdev(ndev);
> +	if (err) {
> +		mhi_unprepare_from_transfer(mhi_dev);
> +		goto out_err;
> +	}
> +
> +	return 0;
> +
> +out_err:
> +	free_netdev(ndev);
> +	return err;
> +}
> +
> +static void mhi_net_remove(struct mhi_device *mhi_dev)
> +{
> +	struct mhi_net_dev *mhi_netdev = dev_get_drvdata(&mhi_dev->dev);
> +
> +	unregister_netdev(mhi_netdev->ndev);
> +
> +	mhi_unprepare_from_transfer(mhi_netdev->mdev);
> +
> +	free_netdev(mhi_netdev->ndev);
> +}
> +
> +static const struct mhi_device_id mhi_net_id_table[] = {
> +	{ .chan = "IP_HW0", .driver_data = (kernel_ulong_t)"mhi_hwip%d" },
it would be good to use driver data as struct which would pass network 
device name, mru, etc. You can have diff mru between sw and hw channel 
if packet level aggregation is enabled.
> +	{ .chan = "IP_SW0", .driver_data = (kernel_ulong_t)"mhi_swip%d" },
> +	{}
> +};
> +MODULE_DEVICE_TABLE(mhi, mhi_net_id_table);
> +
> +static struct mhi_driver mhi_net_driver = {
> +	.probe = mhi_net_probe,
> +	.remove = mhi_net_remove,
> +	.dl_xfer_cb = mhi_net_dl_callback,
> +	.ul_xfer_cb = mhi_net_ul_callback,
> +	.id_table = mhi_net_id_table,
> +	.driver = {
> +		.name = "mhi_net",
> +		.owner = THIS_MODULE,
> +	},
> +};
> +
> +module_mhi_driver(mhi_net_driver);
> +
> +MODULE_AUTHOR("Loic Poulain <loic.poulain@linaro.org>");
> +MODULE_DESCRIPTION("Network over MHI");
> +MODULE_LICENSE("GPL v2");
> 

Thanks,
Hemant
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: [PATCH v6 2/3] net: Add mhi-net driver
  2020-10-17  0:52   ` Hemant Kumar
@ 2020-10-17  1:37     ` Jakub Kicinski
  0 siblings, 0 replies; 9+ messages in thread
From: Jakub Kicinski @ 2020-10-17  1:37 UTC (permalink / raw)
  To: Hemant Kumar
  Cc: Loic Poulain, davem, netdev, manivannan.sadhasivam, eric.dumazet

Please trim your replies.

On Fri, 16 Oct 2020 17:52:28 -0700 Hemant Kumar wrote:
> > +#include <linux/if_arp.h>
> > +#include <linux/mhi.h>
> > +#include <linux/mod_devicetable.h>
> > +#include <linux/module.h>
> > +#include <linux/netdevice.h>
> > +#include <linux/skbuff.h>
> > +#include <linux/u64_stats_sync.h>
> > +
> > +#define MIN_MTU		ETH_MIN_MTU
> > +#define MAX_MTU		0xffff  
> uci driver patch series would take care of this :)

References? What's the UCI patch series?

> > +	if (mhi_queue_is_full(mdev, DMA_TO_DEVICE))
> > +		netif_stop_queue(ndev);  
> is it possible to enable flow control on tx queue if mhi_queue_skb 
> returns non zero value and return NETDEV_TX_BUSY instead of dropping 
> packet at MHI layer ? If this is possible you dont need to export new 
> API as well.

That's not the preferred implementation. Drivers should stop the queues
in advance to avoid requeuing to the qdiscs.

> > +	ndev->tx_queue_len = 1000;  
> some of the above parameters can go in to driver data specific to sw and 
> hw channels.

Really curious to hear what you're talking about here.

Is this already in tree? Was netdev CCed on it?

^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: [PATCH v6 1/2] bus: mhi: Add mhi_queue_is_full function
  2020-10-16  9:20 [PATCH v6 1/2] bus: mhi: Add mhi_queue_is_full function Loic Poulain
  2020-10-16  9:20 ` [PATCH v6 2/3] net: Add mhi-net driver Loic Poulain
@ 2020-10-23  3:06 ` Hemant Kumar
  2020-10-23 15:44   ` Jakub Kicinski
       [not found]   ` <CAMZdPi_NZ5PaONpePHHFOosiuQ50R0_o3bymwzKfp2DJ37BCig@mail.gmail.com>
  1 sibling, 2 replies; 9+ messages in thread
From: Hemant Kumar @ 2020-10-23  3:06 UTC (permalink / raw)
  To: Loic Poulain, davem, kuba
  Cc: netdev, manivannan.sadhasivam, eric.dumazet, Jeffrey Hugo, Bhaumik Bhatt

Hi Loic,

On 10/16/20 2:20 AM, Loic Poulain wrote:
> This function can be used by client driver to determine whether it's
> possible to queue new elements in a channel ring.
> 
> Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
[..]
> +static inline bool mhi_is_ring_full(struct mhi_controller *mhi_cntrl,
> +				    struct mhi_ring *ring)
>   {
>   	void *tmp = ring->wp + ring->el_size;
>   
> @@ -1173,6 +1173,17 @@ int mhi_queue_buf(struct mhi_device *mhi_dev, enum dma_data_direction dir,
>   }
>   EXPORT_SYMBOL_GPL(mhi_queue_buf);
>   
> +bool mhi_queue_is_full(struct mhi_device *mhi_dev, enum dma_data_direction dir)
> +{
> +	struct mhi_controller *mhi_cntrl = mhi_dev->mhi_cntrl;
> +	struct mhi_chan *mhi_chan = (dir == DMA_TO_DEVICE) ?
> +					mhi_dev->ul_chan : mhi_dev->dl_chan;
> +	struct mhi_ring *tre_ring = &mhi_chan->tre_ring;
> +
> +	return mhi_is_ring_full(mhi_cntrl, tre_ring);
> +}
> +EXPORT_SYMBOL_GPL(mhi_queue_is_full);
> 
i was wondering if you can make use of mhi_get_free_desc() API (pushed 
as part of MHI UCI - User Control Interface driver) here?

Thanks,
Hemant
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: [PATCH v6 1/2] bus: mhi: Add mhi_queue_is_full function
  2020-10-23  3:06 ` [PATCH v6 1/2] bus: mhi: Add mhi_queue_is_full function Hemant Kumar
@ 2020-10-23 15:44   ` Jakub Kicinski
  2020-10-23 16:19     ` Jeffrey Hugo
       [not found]   ` <CAMZdPi_NZ5PaONpePHHFOosiuQ50R0_o3bymwzKfp2DJ37BCig@mail.gmail.com>
  1 sibling, 1 reply; 9+ messages in thread
From: Jakub Kicinski @ 2020-10-23 15:44 UTC (permalink / raw)
  To: Hemant Kumar
  Cc: Loic Poulain, davem, netdev, manivannan.sadhasivam, eric.dumazet,
	Jeffrey Hugo, Bhaumik Bhatt

On Thu, 22 Oct 2020 20:06:37 -0700 Hemant Kumar wrote:
> > @@ -1173,6 +1173,17 @@ int mhi_queue_buf(struct mhi_device *mhi_dev, enum dma_data_direction dir,
> >   }
> >   EXPORT_SYMBOL_GPL(mhi_queue_buf);
> >   
> > +bool mhi_queue_is_full(struct mhi_device *mhi_dev, enum dma_data_direction dir)
> > +{
> > +	struct mhi_controller *mhi_cntrl = mhi_dev->mhi_cntrl;
> > +	struct mhi_chan *mhi_chan = (dir == DMA_TO_DEVICE) ?
> > +					mhi_dev->ul_chan : mhi_dev->dl_chan;
> > +	struct mhi_ring *tre_ring = &mhi_chan->tre_ring;
> > +
> > +	return mhi_is_ring_full(mhi_cntrl, tre_ring);
> > +}
> > +EXPORT_SYMBOL_GPL(mhi_queue_is_full);
> >   
> i was wondering if you can make use of mhi_get_free_desc() API (pushed 
> as part of MHI UCI - User Control Interface driver) here?

Let me ask you one more time. Where is this MHI UCI code you're talking
about?

linux$ git remote show linux
* remote linux
  Fetch URL: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
  Push  URL: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
  HEAD branch: master
  Remote branch:
    master tracked
linux$ git fetch linux
linux$ git checkout linux/master
HEAD is now at f9893351acae Merge tag 'kconfig-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
linux$ git grep mhi_get_free_desc
linux$

^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: [PATCH v6 1/2] bus: mhi: Add mhi_queue_is_full function
  2020-10-23 15:44   ` Jakub Kicinski
@ 2020-10-23 16:19     ` Jeffrey Hugo
  0 siblings, 0 replies; 9+ messages in thread
From: Jeffrey Hugo @ 2020-10-23 16:19 UTC (permalink / raw)
  To: Jakub Kicinski, Hemant Kumar
  Cc: Loic Poulain, davem, netdev, manivannan.sadhasivam, eric.dumazet,
	Bhaumik Bhatt

On 10/23/2020 9:44 AM, Jakub Kicinski wrote:
> On Thu, 22 Oct 2020 20:06:37 -0700 Hemant Kumar wrote:
>>> @@ -1173,6 +1173,17 @@ int mhi_queue_buf(struct mhi_device *mhi_dev, enum dma_data_direction dir,
>>>    }
>>>    EXPORT_SYMBOL_GPL(mhi_queue_buf);
>>>    
>>> +bool mhi_queue_is_full(struct mhi_device *mhi_dev, enum dma_data_direction dir)
>>> +{
>>> +	struct mhi_controller *mhi_cntrl = mhi_dev->mhi_cntrl;
>>> +	struct mhi_chan *mhi_chan = (dir == DMA_TO_DEVICE) ?
>>> +					mhi_dev->ul_chan : mhi_dev->dl_chan;
>>> +	struct mhi_ring *tre_ring = &mhi_chan->tre_ring;
>>> +
>>> +	return mhi_is_ring_full(mhi_cntrl, tre_ring);
>>> +}
>>> +EXPORT_SYMBOL_GPL(mhi_queue_is_full);
>>>    
>> i was wondering if you can make use of mhi_get_free_desc() API (pushed
>> as part of MHI UCI - User Control Interface driver) here?
> 
> Let me ask you one more time. Where is this MHI UCI code you're talking
> about?

https://lkml.org/lkml/2020/10/22/186

-- 
Jeffrey Hugo
Qualcomm Technologies, Inc. is a member of the
Code Aurora Forum, a Linux Foundation Collaborative Project.

^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: [PATCH v6 1/2] bus: mhi: Add mhi_queue_is_full function
       [not found]   ` <CAMZdPi_NZ5PaONpePHHFOosiuQ50R0_o3bymwzKfp2DJ37BCig@mail.gmail.com>
@ 2020-10-23 19:24     ` Jeffrey Hugo
  0 siblings, 0 replies; 9+ messages in thread
From: Jeffrey Hugo @ 2020-10-23 19:24 UTC (permalink / raw)
  To: Loic Poulain, Hemant Kumar
  Cc: davem, Jakub Kicinski, netdev, Manivannan Sadhasivam,
	Eric Dumazet, Bhaumik Bhatt

On 10/23/2020 1:11 PM, Loic Poulain wrote:
> Hi Hemant,
> 
> On Fri, 23 Oct 2020 at 05:06, Hemant Kumar <hemantk@codeaurora.org 
> <mailto:hemantk@codeaurora.org>> wrote:
> 
>     Hi Loic,
> 
>     On 10/16/20 2:20 AM, Loic Poulain wrote:
>      > This function can be used by client driver to determine whether it's
>      > possible to queue new elements in a channel ring.
>      >
>      > Signed-off-by: Loic Poulain <loic.poulain@linaro.org
>     <mailto:loic.poulain@linaro.org>>
>     [..]
>      > +static inline bool mhi_is_ring_full(struct mhi_controller
>     *mhi_cntrl,
>      > +                                 struct mhi_ring *ring)
>      >   {
>      >       void *tmp = ring->wp + ring->el_size;
>      >
>      > @@ -1173,6 +1173,17 @@ int mhi_queue_buf(struct mhi_device
>     *mhi_dev, enum dma_data_direction dir,
>      >   }
>      >   EXPORT_SYMBOL_GPL(mhi_queue_buf);
>      >
>      > +bool mhi_queue_is_full(struct mhi_device *mhi_dev, enum
>     dma_data_direction dir)
>      > +{
>      > +     struct mhi_controller *mhi_cntrl = mhi_dev->mhi_cntrl;
>      > +     struct mhi_chan *mhi_chan = (dir == DMA_TO_DEVICE) ?
>      > +                                     mhi_dev->ul_chan :
>     mhi_dev->dl_chan;
>      > +     struct mhi_ring *tre_ring = &mhi_chan->tre_ring;
>      > +
>      > +     return mhi_is_ring_full(mhi_cntrl, tre_ring);
>      > +}
>      > +EXPORT_SYMBOL_GPL(mhi_queue_is_full);
>      >
>     i was wondering if you can make use of mhi_get_free_desc() API (pushed
>     as part of MHI UCI - User Control Interface driver) here?
> 
> 
> I prefer not to depend on PR that is not yet merged to keep things 
> simple, though I could integrate it in my PR... I think this function is 
> good to have anyway for client drivers, and slightly faster since this 
> is just a pointer comparison.

Its a little bit more than that.  Frankly, unless you are counting 
assembly instructions for both methods, the difference is likely to be 
in the noise.

However, I wonder why core MHI changes were not copied to the proper 
list (namely linux-arm-msm)?

-- 
Jeffrey Hugo
Qualcomm Technologies, Inc. is a member of the
Code Aurora Forum, a Linux Foundation Collaborative Project.

^ permalink raw reply	[flat|nested] 9+ messages in thread

end of thread, back to index

Thread overview: 9+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-10-16  9:20 [PATCH v6 1/2] bus: mhi: Add mhi_queue_is_full function Loic Poulain
2020-10-16  9:20 ` [PATCH v6 2/3] net: Add mhi-net driver Loic Poulain
2020-10-16 18:06   ` Jakub Kicinski
2020-10-17  0:52   ` Hemant Kumar
2020-10-17  1:37     ` Jakub Kicinski
2020-10-23  3:06 ` [PATCH v6 1/2] bus: mhi: Add mhi_queue_is_full function Hemant Kumar
2020-10-23 15:44   ` Jakub Kicinski
2020-10-23 16:19     ` Jeffrey Hugo
     [not found]   ` <CAMZdPi_NZ5PaONpePHHFOosiuQ50R0_o3bymwzKfp2DJ37BCig@mail.gmail.com>
2020-10-23 19:24     ` Jeffrey Hugo

Netdev Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/netdev/0 netdev/git/0.git
	git clone --mirror https://lore.kernel.org/netdev/1 netdev/git/1.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 netdev netdev/ https://lore.kernel.org/netdev \
		netdev@vger.kernel.org
	public-inbox-index netdev

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.netdev


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git