Hi!


> @@ -12,4 +12,13 @@ config CAN_CTUCANFD
>  
>  if CAN_CTUCANFD
>  
> +config CAN_CTUCANFD_PCI
> +	tristate "CTU CAN-FD IP core PCI/PCIe driver"
> +	depends on PCI
> +	help
> +	  This driver adds PCI/PCIe support for CTU CAN-FD IP core.
> +	  The project providing FPGA design for Intel EP4CGX15 based DB4CGX15
> +	  PCIe board with PiKRON.com designed transceiver riser shield is available
> +	  at https://gitlab.fel.cvut.cz/canbus/pcie-ctu_can_fd .
> +
>  endif

Ok, now the if in the first patch makes sense. It can stay.

And it is separate module, so EXPORT_SYMBOLs make sense. Ok.

> +#ifndef PCI_VENDOR_ID_TEDIA
> +#define PCI_VENDOR_ID_TEDIA 0x1760
> +#endif

> +#define PCI_DEVICE_ID_ALTERA_CTUCAN_TEST  0xCAFD
> +#define PCI_DEVICE_ID_TEDIA_CTUCAN_VER21 0xff00

These should go elsewhere.

> +static bool use_msi = 1;
> +static bool pci_use_second = 1;

true?

Best regards,
							Pavel
-- 
http://www.livejournal.com/~pavelmachek