From: Marc Kleine-Budde <mkl@pengutronix.de>
To: netdev@vger.kernel.org
Cc: davem@davemloft.net, kuba@kernel.org, linux-can@vger.kernel.org,
kernel@pengutronix.de,
Yegor Yefremov <yegorslists@googlemail.com>,
Marc Kleine-Budde <mkl@pengutronix.de>
Subject: [net 08/27] can: j1939: rename jacd tool
Date: Tue, 3 Nov 2020 23:06:17 +0100 [thread overview]
Message-ID: <20201103220636.972106-9-mkl@pengutronix.de> (raw)
In-Reply-To: <20201103220636.972106-1-mkl@pengutronix.de>
From: Yegor Yefremov <yegorslists@googlemail.com>
Due to naming conflicts, jacd was renamed to j1939acd in:
https://github.com/linux-can/can-utils/pull/199
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Link: https://lore.kernel.org/r/20201020081134.3597-1-yegorslists@googlemail.com
Link: https://github.com/linux-can/can-utils/pull/199
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
Documentation/networking/j1939.rst | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/Documentation/networking/j1939.rst b/Documentation/networking/j1939.rst
index f5be243d250a..081dfc2e0452 100644
--- a/Documentation/networking/j1939.rst
+++ b/Documentation/networking/j1939.rst
@@ -376,7 +376,7 @@ only j1939.addr changed to the new SA, and must then send a valid address claim
packet. This restarts the state machine in the kernel (and any other
participant on the bus) for this NAME.
-can-utils also include the jacd tool, so it can be used as code example or as
+can-utils also include the j1939acd tool, so it can be used as code example or as
default Address Claiming daemon.
Send Examples
--
2.28.0
next prev parent reply other threads:[~2020-11-03 22:07 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-11-03 22:06 pull-request: can 2020-11-03 Marc Kleine-Budde
2020-11-03 22:06 ` [net 01/27] dt-bindings: can: add can-controller.yaml Marc Kleine-Budde
2020-11-03 22:06 ` [net 02/27] dt-bindings: can: flexcan: convert fsl,*flexcan bindings to yaml Marc Kleine-Budde
2020-11-03 22:06 ` [net 03/27] can: proc: can_remove_proc(): silence remove_proc_entry warning Marc Kleine-Budde
2020-11-03 22:06 ` [net 04/27] can: rx-offload: don't call kfree_skb() from IRQ context Marc Kleine-Budde
2020-11-03 22:06 ` [net 05/27] can: dev: can_get_echo_skb(): prevent call to kfree_skb() in hard " Marc Kleine-Budde
2020-11-04 1:21 ` Jakub Kicinski
2020-11-04 4:29 ` Vincent MAILHOL
2020-11-04 8:16 ` Eric Dumazet
2020-11-04 14:59 ` Oliver Hartkopp
2020-11-04 16:02 ` Jakub Kicinski
2020-11-04 17:46 ` Oliver Hartkopp
2020-11-05 4:47 ` Vincent MAILHOL
2020-11-05 7:44 ` Marc Kleine-Budde
2020-11-03 22:06 ` [net 06/27] can: dev: __can_get_echo_skb(): fix real payload length return value for RTR frames Marc Kleine-Budde
2020-11-03 22:06 ` [net 07/27] can: can_create_echo_skb(): fix echo skb generation: always use skb_clone() Marc Kleine-Budde
2020-11-03 22:06 ` Marc Kleine-Budde [this message]
2020-11-03 22:06 ` [net 09/27] can: j1939: fix syntax and spelling Marc Kleine-Budde
2020-11-03 22:06 ` [net 10/27] can: j1939: swap addr and pgn in the send example Marc Kleine-Budde
2020-11-03 22:06 ` [net 11/27] can: j1939: use backquotes for code samples Marc Kleine-Budde
2020-11-03 22:06 ` [net 12/27] can: j1939: j1939_sk_bind(): return failure if netdev is down Marc Kleine-Budde
2020-11-03 22:06 ` [net 13/27] can: isotp: Explain PDU in CAN_ISOTP help text Marc Kleine-Budde
2020-11-03 22:06 ` [net 14/27] can: isotp: isotp_rcv_cf(): enable RX timeout handling in listen-only mode Marc Kleine-Budde
2020-11-03 22:06 ` [net 15/27] can: isotp: padlen(): make const array static, makes object smaller Marc Kleine-Budde
2020-11-03 22:06 ` [net 16/27] can: ti_hecc: ti_hecc_probe(): add missed clk_disable_unprepare() in error path Marc Kleine-Budde
2020-11-03 22:06 ` [net 17/27] can: xilinx_can: handle failure cases of pm_runtime_get_sync Marc Kleine-Budde
2020-11-03 22:06 ` [net 18/27] can: peak_usb: add range checking in decode operations Marc Kleine-Budde
2020-11-03 22:06 ` [net 19/27] can: peak_usb: peak_usb_get_ts_time(): fix timestamp wrapping Marc Kleine-Budde
2020-11-03 22:06 ` [net 20/27] can: peak_canfd: pucan_handle_can_rx(): fix echo management when loopback is on Marc Kleine-Budde
2020-11-03 22:06 ` [net 21/27] can: mcp251xfd: mcp251xfd_regmap_crc_read(): increase severity of CRC read error messages Marc Kleine-Budde
2020-11-05 16:24 ` Manivannan Sadhasivam
2020-11-05 16:39 ` Marc Kleine-Budde
2020-11-05 18:14 ` Manivannan Sadhasivam
2020-11-06 8:35 ` Marc Kleine-Budde
2020-11-03 22:06 ` [net 22/27] can: mcp251xfd: mcp251xfd_regmap_nocrc_read(): fix semicolon.cocci warnings Marc Kleine-Budde
2020-11-03 22:06 ` [net 23/27] can: mcp251xfd: remove unneeded break Marc Kleine-Budde
2020-11-03 22:06 ` [net 24/27] can: flexcan: remove FLEXCAN_QUIRK_DISABLE_MECR quirk for LS1021A Marc Kleine-Budde
2020-11-03 22:06 ` [net 25/27] can: flexcan: add ECC initialization for LX2160A Marc Kleine-Budde
2020-11-03 22:06 ` [net 26/27] can: flexcan: add ECC initialization for VF610 Marc Kleine-Budde
2020-11-03 22:06 ` [net 27/27] can: flexcan: flexcan_remove(): disable wakeup completely Marc Kleine-Budde
2020-11-04 18:43 ` pull-request: can 2020-11-03 Jakub Kicinski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201103220636.972106-9-mkl@pengutronix.de \
--to=mkl@pengutronix.de \
--cc=davem@davemloft.net \
--cc=kernel@pengutronix.de \
--cc=kuba@kernel.org \
--cc=linux-can@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=yegorslists@googlemail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).