From: Russell King - ARM Linux admin <linux@armlinux.org.uk> To: "Pali Rohár" <pali@kernel.org> Cc: "Andrew Lunn" <andrew@lunn.ch>, "Heiner Kallweit" <hkallweit1@gmail.com>, "David S. Miller" <davem@davemloft.net>, "Jakub Kicinski" <kuba@kernel.org>, "Marek Behún" <kabel@kernel.org>, netdev@vger.kernel.org, linux-kernel@vger.kernel.org Subject: Re: [PATCH 3/4] net: sfp: assume that LOS is not implemented if both LOS normal and inverted is set Date: Wed, 30 Dec 2020 17:06:23 +0000 [thread overview] Message-ID: <20201230170623.GV1551@shell.armlinux.org.uk> (raw) In-Reply-To: <20201230165758.jqezvxnl44cvvodw@pali> On Wed, Dec 30, 2020 at 05:57:58PM +0100, Pali Rohár wrote: > On Wednesday 30 December 2020 16:13:10 Russell King - ARM Linux admin wrote: > > On Wed, Dec 30, 2020 at 04:47:54PM +0100, Pali Rohár wrote: > > > Some GPON SFP modules (e.g. Ubiquiti U-Fiber Instant) have set both > > > SFP_OPTIONS_LOS_INVERTED and SFP_OPTIONS_LOS_NORMAL bits in their EEPROM. > > > > > > Such combination of bits is meaningless so assume that LOS signal is not > > > implemented. > > > > > > This patch fixes link carrier for GPON SFP module Ubiquiti U-Fiber Instant. > > > > > > Co-developed-by: Russell King <rmk+kernel@armlinux.org.uk> > > > Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> > > > > No, this is not co-developed. The patch content is exactly what _I_ > > sent you, only the commit description is your own. > > Sorry, in this case I misunderstood usage of this Co-developed-by tag. > I will remove it in next iteration of patches. You need to mark me as the author of the code at the very least... > > > Signed-off-by: Pali Rohár <pali@kernel.org> > > > --- > > > drivers/net/phy/sfp.c | 36 ++++++++++++++++++++++-------------- > > > 1 file changed, 22 insertions(+), 14 deletions(-) > > > > > > diff --git a/drivers/net/phy/sfp.c b/drivers/net/phy/sfp.c > > > index 73f3ecf15260..d47485ed239c 100644 > > > --- a/drivers/net/phy/sfp.c > > > +++ b/drivers/net/phy/sfp.c > > > @@ -1475,15 +1475,19 @@ static void sfp_sm_link_down(struct sfp *sfp) > > > > > > static void sfp_sm_link_check_los(struct sfp *sfp) > > > { > > > - unsigned int los = sfp->state & SFP_F_LOS; > > > + const __be16 los_inverted = cpu_to_be16(SFP_OPTIONS_LOS_INVERTED); > > > + const __be16 los_normal = cpu_to_be16(SFP_OPTIONS_LOS_NORMAL); > > > + __be16 los_options = sfp->id.ext.options & (los_inverted | los_normal); > > > + bool los = false; > > > > > > /* If neither SFP_OPTIONS_LOS_INVERTED nor SFP_OPTIONS_LOS_NORMAL > > > - * are set, we assume that no LOS signal is available. > > > + * are set, we assume that no LOS signal is available. If both are > > > + * set, we assume LOS is not implemented (and is meaningless.) > > > */ > > > - if (sfp->id.ext.options & cpu_to_be16(SFP_OPTIONS_LOS_INVERTED)) > > > - los ^= SFP_F_LOS; > > > - else if (!(sfp->id.ext.options & cpu_to_be16(SFP_OPTIONS_LOS_NORMAL))) > > > - los = 0; > > > + if (los_options == los_inverted) > > > + los = !(sfp->state & SFP_F_LOS); > > > + else if (los_options == los_normal) > > > + los = !!(sfp->state & SFP_F_LOS); > > > > > > if (los) > > > sfp_sm_next(sfp, SFP_S_WAIT_LOS, 0); > > > @@ -1493,18 +1497,22 @@ static void sfp_sm_link_check_los(struct sfp *sfp) > > > > > > static bool sfp_los_event_active(struct sfp *sfp, unsigned int event) > > > { > > > - return (sfp->id.ext.options & cpu_to_be16(SFP_OPTIONS_LOS_INVERTED) && > > > - event == SFP_E_LOS_LOW) || > > > - (sfp->id.ext.options & cpu_to_be16(SFP_OPTIONS_LOS_NORMAL) && > > > - event == SFP_E_LOS_HIGH); > > > + const __be16 los_inverted = cpu_to_be16(SFP_OPTIONS_LOS_INVERTED); > > > + const __be16 los_normal = cpu_to_be16(SFP_OPTIONS_LOS_NORMAL); > > > + __be16 los_options = sfp->id.ext.options & (los_inverted | los_normal); > > > + > > > + return (los_options == los_inverted && event == SFP_E_LOS_LOW) || > > > + (los_options == los_normal && event == SFP_E_LOS_HIGH); > > > } > > > > > > static bool sfp_los_event_inactive(struct sfp *sfp, unsigned int event) > > > { > > > - return (sfp->id.ext.options & cpu_to_be16(SFP_OPTIONS_LOS_INVERTED) && > > > - event == SFP_E_LOS_HIGH) || > > > - (sfp->id.ext.options & cpu_to_be16(SFP_OPTIONS_LOS_NORMAL) && > > > - event == SFP_E_LOS_LOW); > > > + const __be16 los_inverted = cpu_to_be16(SFP_OPTIONS_LOS_INVERTED); > > > + const __be16 los_normal = cpu_to_be16(SFP_OPTIONS_LOS_NORMAL); > > > + __be16 los_options = sfp->id.ext.options & (los_inverted | los_normal); > > > + > > > + return (los_options == los_inverted && event == SFP_E_LOS_HIGH) || > > > + (los_options == los_normal && event == SFP_E_LOS_LOW); > > > } > > > > > > static void sfp_sm_fault(struct sfp *sfp, unsigned int next_state, bool warn) > > > -- > > > 2.20.1 > > > > > > > > > > -- > > RMK's Patch system: https://www.armlinux.org.uk/developer/patches/ > > FTTP is here! 40Mbps down 10Mbps up. Decent connectivity at last! > -- RMK's Patch system: https://www.armlinux.org.uk/developer/patches/ FTTP is here! 40Mbps down 10Mbps up. Decent connectivity at last!
next prev parent reply other threads:[~2020-12-30 17:07 UTC|newest] Thread overview: 78+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-12-30 15:47 [PATCH 0/4] net: sfp: add support for GPON RTL8672/RTL9601C and Ubiquiti U-Fiber Pali Rohár 2020-12-30 15:47 ` [PATCH 1/4] net: sfp: add workaround for Realtek RTL8672 and RTL9601C chips Pali Rohár 2020-12-30 16:10 ` Russell King - ARM Linux admin 2020-12-30 16:56 ` Pali Rohár 2020-12-30 17:05 ` Russell King - ARM Linux admin 2020-12-30 17:13 ` Andrew Lunn 2020-12-30 17:43 ` Pali Rohár 2020-12-30 19:09 ` Russell King - ARM Linux admin 2020-12-30 19:49 ` Andrew Lunn 2020-12-31 12:14 ` Pali Rohár 2020-12-31 15:09 ` Andrew Lunn 2020-12-31 15:40 ` Pali Rohár 2020-12-31 15:30 ` Andrew Lunn 2020-12-31 17:00 ` Pali Rohár 2020-12-31 17:13 ` Andrew Lunn 2021-01-02 1:49 ` Pali Rohár 2021-01-03 2:25 ` Thomas Schreiber 2021-01-03 2:41 ` Pali Rohár 2021-01-06 14:55 ` Pali Rohár 2021-01-06 15:21 ` Russell King - ARM Linux admin 2021-01-06 15:23 ` Russell King - ARM Linux admin 2021-01-06 15:27 ` Russell King - ARM Linux admin 2021-01-06 15:35 ` Pali Rohár 2020-12-30 19:30 ` Andrew Lunn 2020-12-30 19:39 ` Russell King - ARM Linux admin 2020-12-30 17:31 ` Pali Rohár 2020-12-30 19:18 ` Russell King - ARM Linux admin 2020-12-30 15:47 ` [PATCH 2/4] net: sfp: allow to use also SFP modules which are detected as SFF Pali Rohár 2020-12-30 16:11 ` Russell King - ARM Linux admin 2020-12-30 17:06 ` Pali Rohár 2020-12-30 17:27 ` Marek Behún 2020-12-30 19:12 ` Russell King - ARM Linux admin 2020-12-31 13:52 ` Pali Rohár 2020-12-30 15:47 ` [PATCH 3/4] net: sfp: assume that LOS is not implemented if both LOS normal and inverted is set Pali Rohár 2020-12-30 16:13 ` Russell King - ARM Linux admin 2020-12-30 16:57 ` Pali Rohár 2020-12-30 17:06 ` Russell King - ARM Linux admin [this message] 2020-12-30 17:17 ` Andrew Lunn 2020-12-30 17:32 ` Pali Rohár 2020-12-30 15:47 ` [PATCH 4/4] net: sfp: add mode quirk for GPON module Ubiquiti U-Fiber Instant Pali Rohár 2021-01-06 15:37 ` [PATCH v2 0/3] net: sfp: add support for GPON RTL8672/RTL9601C and Ubiquiti U-Fiber Pali Rohár 2021-01-06 15:37 ` [PATCH v2 1/3] net: sfp: add workaround for Realtek RTL8672 and RTL9601C chips Pali Rohár 2021-01-07 2:02 ` Andrew Lunn 2021-01-07 9:08 ` Pali Rohár 2021-01-07 17:19 ` Andrew Lunn 2021-01-07 17:40 ` Russell King - ARM Linux admin 2021-01-07 19:18 ` Pali Rohár 2021-01-07 19:17 ` Pali Rohár 2021-01-07 19:45 ` Russell King - ARM Linux admin 2021-01-07 20:21 ` Marek Behún 2021-01-08 0:49 ` Pali Rohár 2021-01-06 15:37 ` [PATCH v2 2/3] net: sfp: assume that LOS is not implemented if both LOS normal and inverted is set Pali Rohár 2021-01-07 16:54 ` Andrew Lunn 2021-01-09 15:46 ` Russell King - ARM Linux admin 2021-01-09 15:54 ` Andrew Lunn 2021-01-09 16:27 ` Russell King - ARM Linux admin 2021-01-09 19:14 ` Pali Rohár 2021-01-09 23:19 ` Russell King - ARM Linux admin 2021-01-09 23:50 ` Pali Rohár 2021-01-06 15:37 ` [PATCH v2 3/3] net: sfp: add mode quirk for GPON module Ubiquiti U-Fiber Instant Pali Rohár 2021-01-07 16:51 ` Andrew Lunn 2021-01-11 11:39 ` [PATCH v3 0/2] net: sfp: add support for GPON RTL8672/RTL9601C and Ubiquiti U-Fiber Pali Rohár 2021-01-11 11:39 ` [PATCH v3 1/2] net: sfp: add workaround for Realtek RTL8672 and RTL9601C chips Pali Rohár 2021-01-11 15:28 ` Marek Behún 2021-01-11 11:39 ` [PATCH v3 2/2] net: sfp: add mode quirk for GPON module Ubiquiti U-Fiber Instant Pali Rohár 2021-01-11 15:32 ` Marek Behún 2021-01-12 13:33 ` [PATCH v3 0/2] net: sfp: add support for GPON RTL8672/RTL9601C and Ubiquiti U-Fiber Pali Rohár 2021-01-18 9:34 ` Pali Rohár 2021-01-25 14:09 ` Pali Rohár 2021-01-25 14:16 ` Russell King - ARM Linux admin 2021-01-25 14:23 ` Pali Rohár 2021-01-25 14:42 ` Russell King - ARM Linux admin 2021-01-25 14:47 ` Pali Rohár 2021-01-25 15:41 ` Andrew Lunn 2021-01-25 15:02 ` [PATCH v4 " Pali Rohár 2021-01-25 15:02 ` [PATCH v4 1/2] net: sfp: add workaround for Realtek RTL8672 and RTL9601C chips Pali Rohár 2021-01-25 15:02 ` [PATCH v4 2/2] net: sfp: add mode quirk for GPON module Ubiquiti U-Fiber Instant Pali Rohár 2021-01-28 21:50 ` [PATCH v4 0/2] net: sfp: add support for GPON RTL8672/RTL9601C and Ubiquiti U-Fiber patchwork-bot+netdevbpf
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20201230170623.GV1551@shell.armlinux.org.uk \ --to=linux@armlinux.org.uk \ --cc=andrew@lunn.ch \ --cc=davem@davemloft.net \ --cc=hkallweit1@gmail.com \ --cc=kabel@kernel.org \ --cc=kuba@kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=netdev@vger.kernel.org \ --cc=pali@kernel.org \ --subject='Re: [PATCH 3/4] net: sfp: assume that LOS is not implemented if both LOS normal and inverted is set' \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: link
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).