netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: DENG Qingfang <dqfext@gmail.com>
To: Andrew Lunn <andrew@lunn.ch>,
	Vivien Didelot <vivien.didelot@gmail.com>,
	Florian Fainelli <f.fainelli@gmail.com>,
	Vladimir Oltean <olteanv@gmail.com>,
	"David S. Miller" <davem@davemloft.net>,
	Jakub Kicinski <kuba@kernel.org>,
	Rob Herring <robh+dt@kernel.org>,
	Matthias Brugger <matthias.bgg@gmail.com>,
	Sean Wang <sean.wang@mediatek.com>,
	Landen Chao <Landen.Chao@mediatek.com>,
	Philipp Zabel <p.zabel@pengutronix.de>,
	Russell King <linux@armlinux.org.uk>,
	netdev@vger.kernel.org, devicetree@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-mediatek@lists.infradead.org, linux-kernel@vger.kernel.org
Cc: "Frank Wunderlich" <frank-w@public-files.de>,
	"René van Dorst" <opensource@vdorst.com>
Subject: [PATCH net-next 2/2] drivers: net: dsa: mt7530: MT7530 optional GPIO support
Date: Mon, 11 Jan 2021 13:44:28 +0800	[thread overview]
Message-ID: <20210111054428.3273-3-dqfext@gmail.com> (raw)
In-Reply-To: <20210111054428.3273-1-dqfext@gmail.com>

MT7530's LED controller can drive up to 15 LED/GPIOs.

Add support for GPIO control and allow users to use its GPIOs by
setting gpio-controller property in device tree.

Signed-off-by: DENG Qingfang <dqfext@gmail.com>
---
 drivers/net/dsa/mt7530.c | 96 ++++++++++++++++++++++++++++++++++++++++
 drivers/net/dsa/mt7530.h | 20 +++++++++
 2 files changed, 116 insertions(+)

diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index a67cac15a724..0686d8cbd086 100644
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -18,6 +18,7 @@
 #include <linux/regulator/consumer.h>
 #include <linux/reset.h>
 #include <linux/gpio/consumer.h>
+#include <linux/gpio/driver.h>
 #include <net/dsa.h>
 
 #include "mt7530.h"
@@ -1639,6 +1640,95 @@ mtk_get_tag_protocol(struct dsa_switch *ds, int port,
 	}
 }
 
+static u32
+mt7530_gpio_to_bit(unsigned int offset)
+{
+	return BIT(offset + offset / 3);
+}
+
+static int
+mt7530_gpio_get(struct gpio_chip *gc, unsigned int offset)
+{
+	struct mt7530_priv *priv = gpiochip_get_data(gc);
+	u32 bit = mt7530_gpio_to_bit(offset);
+
+	return !!(mt7530_read(priv, MT7530_LED_GPIO_DATA) & bit);
+}
+
+static void
+mt7530_gpio_set(struct gpio_chip *gc, unsigned int offset, int value)
+{
+	struct mt7530_priv *priv = gpiochip_get_data(gc);
+	u32 bit = mt7530_gpio_to_bit(offset);
+
+	if (value)
+		mt7530_set(priv, MT7530_LED_GPIO_DATA, bit);
+	else
+		mt7530_clear(priv, MT7530_LED_GPIO_DATA, bit);
+}
+
+static int
+mt7530_gpio_get_direction(struct gpio_chip *gc, unsigned int offset)
+{
+	struct mt7530_priv *priv = gpiochip_get_data(gc);
+	u32 bit = mt7530_gpio_to_bit(offset);
+
+	return (mt7530_read(priv, MT7530_LED_GPIO_DIR) & bit) ?
+		GPIO_LINE_DIRECTION_OUT : GPIO_LINE_DIRECTION_IN;
+}
+
+static int
+mt7530_gpio_direction_input(struct gpio_chip *gc, unsigned int offset)
+{
+	struct mt7530_priv *priv = gpiochip_get_data(gc);
+	u32 bit = mt7530_gpio_to_bit(offset);
+
+	mt7530_clear(priv, MT7530_LED_GPIO_DIR, bit);
+	mt7530_clear(priv, MT7530_LED_GPIO_OE, bit);
+
+	return 0;
+}
+
+static int
+mt7530_gpio_direction_output(struct gpio_chip *gc, unsigned int offset, int value)
+{
+	struct mt7530_priv *priv = gpiochip_get_data(gc);
+	u32 bit = mt7530_gpio_to_bit(offset);
+
+	mt7530_set(priv, MT7530_LED_GPIO_DIR, bit);
+	mt7530_set(priv, MT7530_LED_GPIO_OE, bit);
+	mt7530_gpio_set(gc, offset, value);
+
+	return 0;
+}
+
+static int
+mt7530_setup_gpio(struct mt7530_priv *priv)
+{
+	struct device *dev = priv->dev;
+	struct gpio_chip *gc;
+
+	gc = devm_kzalloc(dev, sizeof(*gc), GFP_KERNEL);
+	if (!gc)
+		return -ENOMEM;
+
+	mt7530_write(priv, MT7530_LED_IO_MODE, 0);
+
+	gc->label = "mt7530";
+	gc->parent = dev;
+	gc->owner = THIS_MODULE;
+	gc->get_direction = mt7530_gpio_get_direction;
+	gc->direction_input = mt7530_gpio_direction_input;
+	gc->direction_output = mt7530_gpio_direction_output;
+	gc->get = mt7530_gpio_get;
+	gc->set = mt7530_gpio_set;
+	gc->base = -1;
+	gc->ngpio = 15;
+	gc->can_sleep = true;
+
+	return devm_gpiochip_add_data(dev, gc, priv);
+}
+
 static int
 mt7530_setup(struct dsa_switch *ds)
 {
@@ -1781,6 +1871,12 @@ mt7530_setup(struct dsa_switch *ds)
 		}
 	}
 
+	if (of_property_read_bool(priv->dev->of_node, "gpio-controller")) {
+		ret = mt7530_setup_gpio(priv);
+		if (ret)
+			return ret;
+	}
+
 	mt7530_setup_port5(ds, interface);
 
 	/* Flush the FDB table */
diff --git a/drivers/net/dsa/mt7530.h b/drivers/net/dsa/mt7530.h
index 32d8969b3ace..e7903ecc6a7c 100644
--- a/drivers/net/dsa/mt7530.h
+++ b/drivers/net/dsa/mt7530.h
@@ -554,6 +554,26 @@ enum mt7531_clk_skew {
 #define  MT7531_GPIO12_RG_RXD3_MASK	GENMASK(19, 16)
 #define  MT7531_EXT_P_MDIO_12		(2 << 16)
 
+/* Registers for LED GPIO control (MT7530 only)
+ * All registers follow this pattern:
+ * [2:0]    port 0
+ * [6:4]    port 1
+ * [10:8]   port 2
+ * [14:12]  port 3
+ * [18:16]  port 4
+ */
+
+/* LED enable, 0: Disable, 1: Enable (Default) */
+#define MT7530_LED_EN			0x7d00
+/* LED mode, 0: GPIO mode, 1: PHY mode (Default) */
+#define MT7530_LED_IO_MODE		0x7d04
+/* GPIO direction, 0: Input, 1: Output */
+#define MT7530_LED_GPIO_DIR		0x7d10
+/* GPIO output enable, 0: Disable, 1: Enable */
+#define MT7530_LED_GPIO_OE		0x7d14
+/* GPIO value, 0: Low, 1: High */
+#define MT7530_LED_GPIO_DATA		0x7d18
+
 #define MT7530_CREV			0x7ffc
 #define  CHIP_NAME_SHIFT		16
 #define  MT7530_ID			0x7530
-- 
2.25.1


  parent reply	other threads:[~2021-01-11  5:46 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-01-11  5:44 [PATCH net-next 0/2] dsa: add MT7530 GPIO support DENG Qingfang
2021-01-11  5:44 ` [PATCH net-next 1/2] dt-bindings: net: dsa: add MT7530 GPIO controller binding DENG Qingfang
2021-01-14 19:11   ` Rob Herring
2021-01-18 14:43   ` Linus Walleij
2021-01-11  5:44 ` DENG Qingfang [this message]
2021-01-11 11:04   ` [PATCH net-next 2/2] drivers: net: dsa: mt7530: MT7530 optional GPIO support Russell King - ARM Linux admin
2021-01-11 13:40     ` DENG Qingfang
2021-01-11 13:55       ` Russell King - ARM Linux admin
2021-01-18 14:55   ` Linus Walleij
2021-01-19  3:20     ` DENG Qingfang
2021-01-22 10:06       ` Linus Walleij
2021-01-11 13:43 ` [PATCH net-next 0/2] dsa: add MT7530 " Vladimir Oltean
2021-01-14  9:36   ` Bartosz Golaszewski
2021-01-11 15:46 ` Marek Behún
2021-01-12  2:50   ` DENG Qingfang
2021-01-14 17:08     ` Florian Fainelli

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210111054428.3273-3-dqfext@gmail.com \
    --to=dqfext@gmail.com \
    --cc=Landen.Chao@mediatek.com \
    --cc=andrew@lunn.ch \
    --cc=davem@davemloft.net \
    --cc=devicetree@vger.kernel.org \
    --cc=f.fainelli@gmail.com \
    --cc=frank-w@public-files.de \
    --cc=kuba@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=linux@armlinux.org.uk \
    --cc=matthias.bgg@gmail.com \
    --cc=netdev@vger.kernel.org \
    --cc=olteanv@gmail.com \
    --cc=opensource@vdorst.com \
    --cc=p.zabel@pengutronix.de \
    --cc=robh+dt@kernel.org \
    --cc=sean.wang@mediatek.com \
    --cc=vivien.didelot@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).