netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Geert Uytterhoeven <geert+renesas@glider.be>
To: Steve Glendinning <steve.glendinning@shawell.net>,
	"David S . Miller" <davem@davemloft.net>,
	Jakub Kicinski <kuba@kernel.org>
Cc: netdev@vger.kernel.org, linux-renesas-soc@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	Geert Uytterhoeven <geert+renesas@glider.be>
Subject: [PATCH] net: smsc911x: Make Runtime PM handling more fine-grained
Date: Mon, 18 Jan 2021 16:08:57 +0100	[thread overview]
Message-ID: <20210118150857.796943-1-geert+renesas@glider.be> (raw)

Currently the smsc911x driver has mininal power management: during
driver probe, the device is powered up, and during driver remove, it is
powered down.

Improve power management by making it more fine-grained:
  1. Power the device down when driver probe is finished,
  2. Power the device (down) when it is opened (closed),
  3. Make sure the device is powered during PHY access.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
Tested on r8a73a4/ape6evm, where the LAN9220 is connected to a
power-managed bus, and any attempt to access a device register while the
device is suspended will trigger an asynchronous external abort.
---
 drivers/net/ethernet/smsc/smsc911x.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/smsc/smsc911x.c b/drivers/net/ethernet/smsc/smsc911x.c
index 823d9a7184fe6aa1..606c79de93a68146 100644
--- a/drivers/net/ethernet/smsc/smsc911x.c
+++ b/drivers/net/ethernet/smsc/smsc911x.c
@@ -557,6 +557,7 @@ static int smsc911x_mii_read(struct mii_bus *bus, int phyaddr, int regidx)
 	unsigned int addr;
 	int i, reg;
 
+	pm_runtime_get_sync(bus->parent);
 	spin_lock_irqsave(&pdata->mac_lock, flags);
 
 	/* Confirm MII not busy */
@@ -582,6 +583,7 @@ static int smsc911x_mii_read(struct mii_bus *bus, int phyaddr, int regidx)
 
 out:
 	spin_unlock_irqrestore(&pdata->mac_lock, flags);
+	pm_runtime_put(bus->parent);
 	return reg;
 }
 
@@ -594,6 +596,7 @@ static int smsc911x_mii_write(struct mii_bus *bus, int phyaddr, int regidx,
 	unsigned int addr;
 	int i, reg;
 
+	pm_runtime_get_sync(bus->parent);
 	spin_lock_irqsave(&pdata->mac_lock, flags);
 
 	/* Confirm MII not busy */
@@ -623,6 +626,7 @@ static int smsc911x_mii_write(struct mii_bus *bus, int phyaddr, int regidx,
 
 out:
 	spin_unlock_irqrestore(&pdata->mac_lock, flags);
+	pm_runtime_put(bus->parent);
 	return reg;
 }
 
@@ -1589,6 +1593,8 @@ static int smsc911x_open(struct net_device *dev)
 	int retval;
 	int irq_flags;
 
+	pm_runtime_get_sync(dev->dev.parent);
+
 	/* find and start the given phy */
 	if (!dev->phydev) {
 		retval = smsc911x_mii_probe(dev);
@@ -1735,6 +1741,7 @@ static int smsc911x_open(struct net_device *dev)
 	phy_disconnect(dev->phydev);
 	dev->phydev = NULL;
 out:
+	pm_runtime_put(dev->dev.parent);
 	return retval;
 }
 
@@ -1766,6 +1773,7 @@ static int smsc911x_stop(struct net_device *dev)
 		dev->phydev = NULL;
 	}
 	netif_carrier_off(dev);
+	pm_runtime_put(dev->dev.parent);
 
 	SMSC_TRACE(pdata, ifdown, "Interface stopped");
 	return 0;
@@ -2334,7 +2342,6 @@ static int smsc911x_drv_remove(struct platform_device *pdev)
 
 	free_netdev(dev);
 
-	pm_runtime_put(&pdev->dev);
 	pm_runtime_disable(&pdev->dev);
 
 	return 0;
@@ -2540,6 +2547,7 @@ static int smsc911x_drv_probe(struct platform_device *pdev)
 	}
 
 	spin_unlock_irq(&pdata->mac_lock);
+	pm_runtime_put(&pdev->dev);
 
 	netdev_info(dev, "MAC Address: %pM\n", dev->dev_addr);
 
-- 
2.25.1


             reply	other threads:[~2021-01-18 15:10 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-01-18 15:08 Geert Uytterhoeven [this message]
2021-01-20  1:50 ` [PATCH] net: smsc911x: Make Runtime PM handling more fine-grained patchwork-bot+netdevbpf

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210118150857.796943-1-geert+renesas@glider.be \
    --to=geert+renesas@glider.be \
    --cc=davem@davemloft.net \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=steve.glendinning@shawell.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).