From: Saeed Mahameed <saeed@kernel.org>
To: "David S. Miller" <davem@davemloft.net>,
Jakub Kicinski <kuba@kernel.org>,
Jason Gunthorpe <jgg@nvidia.com>
Cc: netdev@vger.kernel.org, linux-rdma@vger.kernel.org,
alexander.duyck@gmail.com, sridhar.samudrala@intel.com,
edwin.peer@broadcom.com, dsahern@kernel.org,
kiran.patil@intel.com, jacob.e.keller@intel.com,
david.m.ertman@intel.com, dan.j.williams@intel.com,
Vu Pham <vuhuong@nvidia.com>, Parav Pandit <parav@nvidia.com>,
Roi Dayan <roid@nvidia.com>, Saeed Mahameed <saeedm@nvidia.com>
Subject: [net-next V10 08/14] net/mlx5: E-switch, Prepare eswitch to handle SF vport
Date: Fri, 22 Jan 2021 11:36:52 -0800 [thread overview]
Message-ID: <20210122193658.282884-9-saeed@kernel.org> (raw)
In-Reply-To: <20210122193658.282884-1-saeed@kernel.org>
From: Vu Pham <vuhuong@nvidia.com>
Prepare eswitch to handle SF vport during
(a) querying eswitch functions
(b) egress ACL creation
(c) account for SF vports in total vports calculation
Assign a dedicated placeholder for SFs vports and their representors.
They are placed after VFs vports and before ECPF vports as below:
[PF,VF0,...,VFn,SF0,...SFm,ECPF,UPLINK].
Change functions to map SF's vport numbers to indices when
accessing the vports or representors arrays, and vice versa.
Signed-off-by: Vu Pham <vuhuong@nvidia.com>
Signed-off-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
---
.../mellanox/mlx5/core/esw/acl/egress_ofld.c | 2 +-
.../net/ethernet/mellanox/mlx5/core/eswitch.c | 11 +++-
.../net/ethernet/mellanox/mlx5/core/eswitch.h | 50 +++++++++++++++++++
.../mellanox/mlx5/core/eswitch_offloads.c | 11 ++++
.../net/ethernet/mellanox/mlx5/core/vport.c | 3 +-
5 files changed, 73 insertions(+), 4 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/esw/acl/egress_ofld.c b/drivers/net/ethernet/mellanox/mlx5/core/esw/acl/egress_ofld.c
index 4c74e2690d57..26b37a0f8762 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/esw/acl/egress_ofld.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/esw/acl/egress_ofld.c
@@ -150,7 +150,7 @@ static void esw_acl_egress_ofld_groups_destroy(struct mlx5_vport *vport)
static bool esw_acl_egress_needed(const struct mlx5_eswitch *esw, u16 vport_num)
{
- return mlx5_eswitch_is_vf_vport(esw, vport_num);
+ return mlx5_eswitch_is_vf_vport(esw, vport_num) || mlx5_esw_is_sf_vport(esw, vport_num);
}
int esw_acl_egress_ofld_setup(struct mlx5_eswitch *esw, struct mlx5_vport *vport)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c b/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c
index 876e6449edb3..55ebd9474d97 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c
@@ -1365,9 +1365,15 @@ const u32 *mlx5_esw_query_functions(struct mlx5_core_dev *dev)
{
int outlen = MLX5_ST_SZ_BYTES(query_esw_functions_out);
u32 in[MLX5_ST_SZ_DW(query_esw_functions_in)] = {};
+ u16 max_sf_vports;
u32 *out;
int err;
+ max_sf_vports = mlx5_sf_max_functions(dev);
+ /* Device interface is array of 64-bits */
+ if (max_sf_vports)
+ outlen += DIV_ROUND_UP(max_sf_vports, BITS_PER_TYPE(__be64)) * sizeof(__be64);
+
out = kvzalloc(outlen, GFP_KERNEL);
if (!out)
return ERR_PTR(-ENOMEM);
@@ -1375,7 +1381,7 @@ const u32 *mlx5_esw_query_functions(struct mlx5_core_dev *dev)
MLX5_SET(query_esw_functions_in, in, opcode,
MLX5_CMD_OP_QUERY_ESW_FUNCTIONS);
- err = mlx5_cmd_exec_inout(dev, query_esw_functions, in, out);
+ err = mlx5_cmd_exec(dev, in, sizeof(in), out, outlen);
if (!err)
return out;
@@ -1898,7 +1904,8 @@ static bool
is_port_function_supported(const struct mlx5_eswitch *esw, u16 vport_num)
{
return vport_num == MLX5_VPORT_PF ||
- mlx5_eswitch_is_vf_vport(esw, vport_num);
+ mlx5_eswitch_is_vf_vport(esw, vport_num) ||
+ mlx5_esw_is_sf_vport(esw, vport_num);
}
int mlx5_devlink_port_function_hw_addr_get(struct devlink *devlink,
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/eswitch.h b/drivers/net/ethernet/mellanox/mlx5/core/eswitch.h
index cf87de94418f..4e3ed878ff03 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/eswitch.h
+++ b/drivers/net/ethernet/mellanox/mlx5/core/eswitch.h
@@ -43,6 +43,7 @@
#include <linux/mlx5/fs.h>
#include "lib/mpfs.h"
#include "lib/fs_chains.h"
+#include "sf/sf.h"
#include "en/tc_ct.h"
#ifdef CONFIG_MLX5_ESWITCH
@@ -499,6 +500,40 @@ static inline u16 mlx5_eswitch_first_host_vport_num(struct mlx5_core_dev *dev)
MLX5_VPORT_PF : MLX5_VPORT_FIRST_VF;
}
+static inline int mlx5_esw_sf_start_idx(const struct mlx5_eswitch *esw)
+{
+ /* PF and VF vports indices start from 0 to max_vfs */
+ return MLX5_VPORT_PF_PLACEHOLDER + mlx5_core_max_vfs(esw->dev);
+}
+
+static inline int mlx5_esw_sf_end_idx(const struct mlx5_eswitch *esw)
+{
+ return mlx5_esw_sf_start_idx(esw) + mlx5_sf_max_functions(esw->dev);
+}
+
+static inline int
+mlx5_esw_sf_vport_num_to_index(const struct mlx5_eswitch *esw, u16 vport_num)
+{
+ return vport_num - mlx5_sf_start_function_id(esw->dev) +
+ MLX5_VPORT_PF_PLACEHOLDER + mlx5_core_max_vfs(esw->dev);
+}
+
+static inline u16
+mlx5_esw_sf_vport_index_to_num(const struct mlx5_eswitch *esw, int idx)
+{
+ return mlx5_sf_start_function_id(esw->dev) + idx -
+ (MLX5_VPORT_PF_PLACEHOLDER + mlx5_core_max_vfs(esw->dev));
+}
+
+static inline bool
+mlx5_esw_is_sf_vport(const struct mlx5_eswitch *esw, u16 vport_num)
+{
+ return mlx5_sf_supported(esw->dev) &&
+ vport_num >= mlx5_sf_start_function_id(esw->dev) &&
+ (vport_num < (mlx5_sf_start_function_id(esw->dev) +
+ mlx5_sf_max_functions(esw->dev)));
+}
+
static inline bool mlx5_eswitch_is_funcs_handler(const struct mlx5_core_dev *dev)
{
return mlx5_core_is_ecpf_esw_manager(dev);
@@ -527,6 +562,10 @@ static inline int mlx5_eswitch_vport_num_to_index(struct mlx5_eswitch *esw,
if (vport_num == MLX5_VPORT_UPLINK)
return mlx5_eswitch_uplink_idx(esw);
+ if (mlx5_esw_is_sf_vport(esw, vport_num))
+ return mlx5_esw_sf_vport_num_to_index(esw, vport_num);
+
+ /* PF and VF vports start from 0 to max_vfs */
return vport_num;
}
@@ -540,6 +579,12 @@ static inline u16 mlx5_eswitch_index_to_vport_num(struct mlx5_eswitch *esw,
if (index == mlx5_eswitch_uplink_idx(esw))
return MLX5_VPORT_UPLINK;
+ /* SF vports indices are after VFs and before ECPF */
+ if (mlx5_sf_supported(esw->dev) &&
+ index > mlx5_core_max_vfs(esw->dev))
+ return mlx5_esw_sf_vport_index_to_num(esw, index);
+
+ /* PF and VF vports start from 0 to max_vfs */
return index;
}
@@ -625,6 +670,11 @@ void mlx5e_tc_clean_fdb_peer_flows(struct mlx5_eswitch *esw);
for ((vport) = (nvfs); \
(vport) >= (esw)->first_host_vport; (vport)--)
+#define mlx5_esw_for_each_sf_rep(esw, i, rep) \
+ for ((i) = mlx5_esw_sf_start_idx(esw); \
+ (rep) = &(esw)->offloads.vport_reps[(i)], \
+ (i) < mlx5_esw_sf_end_idx(esw); (i++))
+
struct mlx5_eswitch *mlx5_devlink_eswitch_get(struct devlink *devlink);
struct mlx5_vport *__must_check
mlx5_eswitch_get_vport(struct mlx5_eswitch *esw, u16 vport_num);
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c b/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c
index 2f6a0ae20650..2d241f7351b5 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c
@@ -1800,11 +1800,22 @@ static void __esw_offloads_unload_rep(struct mlx5_eswitch *esw,
esw->offloads.rep_ops[rep_type]->unload(rep);
}
+static void __unload_reps_sf_vport(struct mlx5_eswitch *esw, u8 rep_type)
+{
+ struct mlx5_eswitch_rep *rep;
+ int i;
+
+ mlx5_esw_for_each_sf_rep(esw, i, rep)
+ __esw_offloads_unload_rep(esw, rep, rep_type);
+}
+
static void __unload_reps_all_vport(struct mlx5_eswitch *esw, u8 rep_type)
{
struct mlx5_eswitch_rep *rep;
int i;
+ __unload_reps_sf_vport(esw, rep_type);
+
mlx5_esw_for_each_vf_rep_reverse(esw, i, rep, esw->esw_funcs.num_vfs)
__esw_offloads_unload_rep(esw, rep, rep_type);
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/vport.c b/drivers/net/ethernet/mellanox/mlx5/core/vport.c
index bdafc85fd874..ba78e0660523 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/vport.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/vport.c
@@ -36,6 +36,7 @@
#include <linux/mlx5/vport.h>
#include <linux/mlx5/eswitch.h>
#include "mlx5_core.h"
+#include "sf/sf.h"
/* Mutex to hold while enabling or disabling RoCE */
static DEFINE_MUTEX(mlx5_roce_en_lock);
@@ -1160,6 +1161,6 @@ EXPORT_SYMBOL_GPL(mlx5_query_nic_system_image_guid);
*/
u16 mlx5_eswitch_get_total_vports(const struct mlx5_core_dev *dev)
{
- return MLX5_SPECIAL_VPORTS(dev) + mlx5_core_max_vfs(dev);
+ return MLX5_SPECIAL_VPORTS(dev) + mlx5_core_max_vfs(dev) + mlx5_sf_max_functions(dev);
}
EXPORT_SYMBOL_GPL(mlx5_eswitch_get_total_vports);
--
2.26.2
next prev parent reply other threads:[~2021-01-22 23:05 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-01-22 19:36 [pull request][net-next V10 00/14] Add mlx5 subfunction support Saeed Mahameed
2021-01-22 19:36 ` [net-next V10 01/14] devlink: Prepare code to fill multiple port function attributes Saeed Mahameed
2021-01-29 1:40 ` patchwork-bot+netdevbpf
2021-01-22 19:36 ` [net-next V10 02/14] devlink: Introduce PCI SF port flavour and port attribute Saeed Mahameed
2021-01-22 19:36 ` [net-next V10 03/14] devlink: Support add and delete devlink port Saeed Mahameed
2021-01-22 19:36 ` [net-next V10 04/14] devlink: Support get and set state of port function Saeed Mahameed
2021-01-22 19:36 ` [net-next V10 05/14] net/mlx5: Introduce vhca state event notifier Saeed Mahameed
2021-01-22 19:36 ` [net-next V10 06/14] net/mlx5: SF, Add auxiliary device support Saeed Mahameed
2021-01-22 19:36 ` [net-next V10 07/14] net/mlx5: SF, Add auxiliary device driver Saeed Mahameed
2021-01-22 19:36 ` Saeed Mahameed [this message]
2021-01-22 19:36 ` [net-next V10 09/14] net/mlx5: E-switch, Add eswitch helpers for SF vport Saeed Mahameed
2021-01-22 19:36 ` [net-next V10 10/14] net/mlx5: SF, Add port add delete functionality Saeed Mahameed
2021-01-22 19:36 ` [net-next V10 11/14] net/mlx5: SF, Port function state change support Saeed Mahameed
2021-01-22 19:36 ` [net-next V10 12/14] devlink: Add devlink port documentation Saeed Mahameed
2021-01-22 19:36 ` [net-next V10 13/14] devlink: Extend devlink port documentation for subfunctions Saeed Mahameed
2021-01-22 19:36 ` [net-next V10 14/14] net/mlx5: Add devlink subfunction port documentation Saeed Mahameed
2021-01-24 20:47 ` [pull request][net-next V10 00/14] Add mlx5 subfunction support Edwin Peer
2021-01-25 10:57 ` Parav Pandit
2021-01-25 13:22 ` Jason Gunthorpe
2021-01-25 19:23 ` Edwin Peer
2021-01-25 19:49 ` Jason Gunthorpe
2021-01-25 20:05 ` Edwin Peer
2021-01-25 20:22 ` Michael Chan
2021-01-25 20:26 ` Parav Pandit
2021-01-25 18:35 ` Edwin Peer
2021-01-25 19:34 ` Edwin Peer
2021-01-25 19:59 ` Jason Gunthorpe
2021-01-25 20:22 ` Edwin Peer
2021-01-25 20:41 ` Jason Gunthorpe
2021-01-25 21:23 ` Edwin Peer
2021-01-25 23:13 ` Jason Gunthorpe
2021-01-27 1:34 ` Jakub Kicinski
2021-01-29 0:03 ` Saeed Mahameed
2021-01-29 0:11 ` Jakub Kicinski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210122193658.282884-9-saeed@kernel.org \
--to=saeed@kernel.org \
--cc=alexander.duyck@gmail.com \
--cc=dan.j.williams@intel.com \
--cc=davem@davemloft.net \
--cc=david.m.ertman@intel.com \
--cc=dsahern@kernel.org \
--cc=edwin.peer@broadcom.com \
--cc=jacob.e.keller@intel.com \
--cc=jgg@nvidia.com \
--cc=kiran.patil@intel.com \
--cc=kuba@kernel.org \
--cc=linux-rdma@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=parav@nvidia.com \
--cc=roid@nvidia.com \
--cc=saeedm@nvidia.com \
--cc=sridhar.samudrala@intel.com \
--cc=vuhuong@nvidia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).