Netdev Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH v2 net-next] net: phy: icplus: call phy_restore_page() when phy_select_page() fails
@ 2021-02-19 10:10 Dan Carpenter
  2021-02-19 10:46 ` Michael Walle
                   ` (2 more replies)
  0 siblings, 3 replies; 5+ messages in thread
From: Dan Carpenter @ 2021-02-19 10:10 UTC (permalink / raw)
  To: Andrew Lunn
  Cc: Heiner Kallweit, Russell King, David S. Miller, Jakub Kicinski,
	Michael Walle, netdev, kernel-janitors

The comments to phy_select_page() say that "phy_restore_page() must
always be called after this, irrespective of success or failure of this
call."  If we don't call phy_restore_page() then we are still holding
the phy_lock_mdio_bus() so it eventually leads to a dead lock.

Fixes: 32ab60e53920 ("net: phy: icplus: add MDI/MDIX support for IP101A/G")
Fixes: f9bc51e6cce2 ("net: phy: icplus: fix paged register access")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
---
v2: fix a couple other instances I missed in v1

 drivers/net/phy/icplus.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/drivers/net/phy/icplus.c b/drivers/net/phy/icplus.c
index 3e431737c1ba..a00a667454a9 100644
--- a/drivers/net/phy/icplus.c
+++ b/drivers/net/phy/icplus.c
@@ -239,7 +239,7 @@ static int ip101a_g_config_intr_pin(struct phy_device *phydev)
 
 	oldpage = phy_select_page(phydev, IP101G_DEFAULT_PAGE);
 	if (oldpage < 0)
-		return oldpage;
+		goto out;
 
 	/* configure the RXER/INTR_32 pin of the 32-pin IP101GR if needed: */
 	switch (priv->sel_intr32) {
@@ -314,7 +314,7 @@ static int ip101a_g_read_status(struct phy_device *phydev)
 
 	oldpage = phy_select_page(phydev, IP101G_DEFAULT_PAGE);
 	if (oldpage < 0)
-		return oldpage;
+		goto out;
 
 	ret = __phy_read(phydev, IP10XX_SPEC_CTRL_STATUS);
 	if (ret < 0)
@@ -349,7 +349,8 @@ static int ip101a_g_read_status(struct phy_device *phydev)
 static int ip101a_g_config_mdix(struct phy_device *phydev)
 {
 	u16 ctrl = 0, ctrl2 = 0;
-	int oldpage, ret;
+	int oldpage;
+	int ret = 0;
 
 	switch (phydev->mdix_ctrl) {
 	case ETH_TP_MDI:
@@ -367,7 +368,7 @@ static int ip101a_g_config_mdix(struct phy_device *phydev)
 
 	oldpage = phy_select_page(phydev, IP101G_DEFAULT_PAGE);
 	if (oldpage < 0)
-		return oldpage;
+		goto out;
 
 	ret = __phy_modify(phydev, IP10XX_SPEC_CTRL_STATUS,
 			   IP101A_G_AUTO_MDIX_DIS, ctrl);
-- 
2.30.0


^ permalink raw reply	[flat|nested] 5+ messages in thread

end of thread, back to index

Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-02-19 10:10 [PATCH v2 net-next] net: phy: icplus: call phy_restore_page() when phy_select_page() fails Dan Carpenter
2021-02-19 10:46 ` Michael Walle
2021-02-19 11:09   ` Dan Carpenter
2021-02-19 11:36 ` Russell King - ARM Linux admin
2021-02-23  3:00 ` patchwork-bot+netdevbpf

Netdev Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/netdev/0 netdev/git/0.git
	git clone --mirror https://lore.kernel.org/netdev/1 netdev/git/1.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 netdev netdev/ https://lore.kernel.org/netdev \
		netdev@vger.kernel.org
	public-inbox-index netdev

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.netdev


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git