Netdev Archive on lore.kernel.org
 help / color / Atom feed
From: Oleksij Rempel <o.rempel@pengutronix.de>
To: mkl@pengutronix.de, "David S. Miller" <davem@davemloft.net>,
	Jakub Kicinski <kuba@kernel.org>,
	Oliver Hartkopp <socketcan@hartkopp.net>,
	Robin van der Gracht <robin@protonic.nl>,
	Johannes Berg <johannes@sipsolutions.net>
Cc: Oleksij Rempel <o.rempel@pengutronix.de>,
	Andre Naujoks <nautsch2@gmail.com>,
	Eric Dumazet <edumazet@google.com>,
	kernel@pengutronix.de, linux-can@vger.kernel.org,
	netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-wireless@vger.kernel.org
Subject: [PATCH net v2 2/2] can: fix ref count warning if socket was closed before skb was cloned
Date: Tue, 23 Feb 2021 06:53:20 +0100
Message-ID: <20210223055321.3891-3-o.rempel@pengutronix.de> (raw)
In-Reply-To: <20210223055321.3891-1-o.rempel@pengutronix.de>

There are two ref count variables controlling the free()ing of a socket:
- struct sock::sk_refcnt - which is changed by sock_hold()/sock_put()
- struct sock::sk_wmem_alloc - which accounts the memory allocated by
  the skbs in the send path.

If the socket is closed the struct sock::sk_refcnt will finally reach 0
and sk_free() is called. Which then calls
refcount_dec_and_test(&sk->sk_wmem_alloc). If sk_wmem_alloc reaches 0
the socket is actually free()ed.

In case there are still TX skbs on the fly and the socket() is closed,
the struct sock::sk_refcnt reaches 0. In the TX-path the CAN stack
clones an "echo" skb, calls sock_hold() on the original socket and
references it. This produces the following back trace:

| WARNING: CPU: 0 PID: 280 at lib/refcount.c:25 refcount_warn_saturate+0x114/0x134
| refcount_t: addition on 0; use-after-free.
| Modules linked in: coda_vpu(E) v4l2_jpeg(E) videobuf2_vmalloc(E) imx_vdoa(E)
| CPU: 0 PID: 280 Comm: test_can.sh Tainted: G            E     5.11.0-04577-gf8ff6603c617 #203
| Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree)
| Backtrace:
| [<80bafea4>] (dump_backtrace) from [<80bb0280>] (show_stack+0x20/0x24) r7:00000000 r6:600f0113 r5:00000000 r4:81441220
| [<80bb0260>] (show_stack) from [<80bb593c>] (dump_stack+0xa0/0xc8)
| [<80bb589c>] (dump_stack) from [<8012b268>] (__warn+0xd4/0x114) r9:00000019 r8:80f4a8c2 r7:83e4150c r6:00000000 r5:00000009 r4:80528f90
| [<8012b194>] (__warn) from [<80bb09c4>] (warn_slowpath_fmt+0x88/0xc8) r9:83f26400 r8:80f4a8d1 r7:00000009 r6:80528f90 r5:00000019 r4:80f4a8c2
| [<80bb0940>] (warn_slowpath_fmt) from [<80528f90>] (refcount_warn_saturate+0x114/0x134) r8:00000000 r7:00000000 r6:82b44000 r5:834e5600 r4:83f4d540
| [<80528e7c>] (refcount_warn_saturate) from [<8079a4c8>] (__refcount_add.constprop.0+0x4c/0x50)
| [<8079a47c>] (__refcount_add.constprop.0) from [<8079a57c>] (can_put_echo_skb+0xb0/0x13c)
| [<8079a4cc>] (can_put_echo_skb) from [<8079ba98>] (flexcan_start_xmit+0x1c4/0x230) r9:00000010 r8:83f48610 r7:0fdc0000 r6:0c080000 r5:82b44000 r4:834e5600
| [<8079b8d4>] (flexcan_start_xmit) from [<80969078>] (netdev_start_xmit+0x44/0x70) r9:814c0ba0 r8:80c8790c r7:00000000 r6:834e5600 r5:82b44000 r4:82ab1f00
| [<80969034>] (netdev_start_xmit) from [<809725a4>] (dev_hard_start_xmit+0x19c/0x318) r9:814c0ba0 r8:00000000 r7:82ab1f00 r6:82b44000 r5:00000000 r4:834e5600
| [<80972408>] (dev_hard_start_xmit) from [<809c6584>] (sch_direct_xmit+0xcc/0x264) r10:834e5600 r9:00000000 r8:00000000 r7:82b44000 r6:82ab1f00 r5:834e5600 r4:83f27400
| [<809c64b8>] (sch_direct_xmit) from [<809c6c0c>] (__qdisc_run+0x4f0/0x534)

To fix this problem, we have to take into account, that the socket
technically still there but should not used (by any new skbs) any more.
The function skb_clone_sk_optional() (introduced in the previous patch)
takes care of this. It will only clone the skb, if the sk is set and the
refcount has not reached 0.

Cc: Oliver Hartkopp <socketcan@hartkopp.net>
Cc: Andre Naujoks <nautsch2@gmail.com>
Cc: Eric Dumazet <edumazet@google.com>
Fixes: 0ae89beb283a ("can: add destructor for self generated skbs")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
 include/linux/can/skb.h   | 3 +--
 net/can/af_can.c          | 6 +++---
 net/can/j1939/main.c      | 3 +--
 net/can/j1939/socket.c    | 3 +--
 net/can/j1939/transport.c | 4 +---
 5 files changed, 7 insertions(+), 12 deletions(-)

diff --git a/include/linux/can/skb.h b/include/linux/can/skb.h
index 685f34cfba20..bc1af38697a2 100644
--- a/include/linux/can/skb.h
+++ b/include/linux/can/skb.h
@@ -79,13 +79,12 @@ static inline struct sk_buff *can_create_echo_skb(struct sk_buff *skb)
 {
 	struct sk_buff *nskb;
 
-	nskb = skb_clone(skb, GFP_ATOMIC);
+	nskb = skb_clone_sk_optional(skb);
 	if (unlikely(!nskb)) {
 		kfree_skb(skb);
 		return NULL;
 	}
 
-	can_skb_set_owner(nskb, skb->sk);
 	consume_skb(skb);
 	return nskb;
 }
diff --git a/net/can/af_can.c b/net/can/af_can.c
index cce2af10eb3e..9e1bd60e7e1b 100644
--- a/net/can/af_can.c
+++ b/net/can/af_can.c
@@ -251,20 +251,20 @@ int can_send(struct sk_buff *skb, int loop)
 		 * its own. Example: can_raw sockopt CAN_RAW_RECV_OWN_MSGS
 		 * Therefore we have to ensure that skb->sk remains the
 		 * reference to the originating sock by restoring skb->sk
-		 * after each skb_clone() or skb_orphan() usage.
+		 * after each skb_clone() or skb_orphan() usage -
+		 * skb_clone_sk_optional() takes care of that.
 		 */
 
 		if (!(skb->dev->flags & IFF_ECHO)) {
 			/* If the interface is not capable to do loopback
 			 * itself, we do it here.
 			 */
-			newskb = skb_clone(skb, GFP_ATOMIC);
+			newskb = skb_clone_sk_optional(skb);
 			if (!newskb) {
 				kfree_skb(skb);
 				return -ENOMEM;
 			}
 
-			can_skb_set_owner(newskb, skb->sk);
 			newskb->ip_summed = CHECKSUM_UNNECESSARY;
 			newskb->pkt_type = PACKET_BROADCAST;
 		}
diff --git a/net/can/j1939/main.c b/net/can/j1939/main.c
index da3a7a7bcff2..4f6852d48077 100644
--- a/net/can/j1939/main.c
+++ b/net/can/j1939/main.c
@@ -47,12 +47,11 @@ static void j1939_can_recv(struct sk_buff *iskb, void *data)
 	 * the header goes into sockaddr.
 	 * j1939 may not touch the incoming skb in such way
 	 */
-	skb = skb_clone(iskb, GFP_ATOMIC);
+	skb = skb_clone_sk_optional(iskb);
 	if (!skb)
 		return;
 
 	j1939_priv_get(priv);
-	can_skb_set_owner(skb, iskb->sk);
 
 	/* get a pointer to the header of the skb
 	 * the skb payload (pointer) is moved, so that the next skb_data
diff --git a/net/can/j1939/socket.c b/net/can/j1939/socket.c
index 4e4a510d82f9..c1be6c26ff76 100644
--- a/net/can/j1939/socket.c
+++ b/net/can/j1939/socket.c
@@ -305,12 +305,11 @@ static void j1939_sk_recv_one(struct j1939_sock *jsk, struct sk_buff *oskb)
 	if (!j1939_sk_recv_match_one(jsk, oskcb))
 		return;
 
-	skb = skb_clone(oskb, GFP_ATOMIC);
+	skb = skb_clone_sk_optional(oskb);
 	if (!skb) {
 		pr_warn("skb clone failed\n");
 		return;
 	}
-	can_skb_set_owner(skb, oskb->sk);
 
 	skcb = j1939_skb_to_cb(skb);
 	skcb->msg_flags &= ~(MSG_DONTROUTE);
diff --git a/net/can/j1939/transport.c b/net/can/j1939/transport.c
index e09d087ba240..e902557bbe17 100644
--- a/net/can/j1939/transport.c
+++ b/net/can/j1939/transport.c
@@ -1014,12 +1014,10 @@ static int j1939_simple_txnext(struct j1939_session *session)
 	if (!se_skb)
 		return 0;
 
-	skb = skb_clone(se_skb, GFP_ATOMIC);
+	skb = skb_clone_sk_optional(se_skb);
 	if (!skb)
 		return -ENOMEM;
 
-	can_skb_set_owner(skb, se_skb->sk);
-
 	j1939_tp_set_rxtimeout(session, J1939_SIMPLE_ECHO_TIMEOUT_MS);
 
 	ret = j1939_send_one(priv, skb);
-- 
2.29.2


  parent reply index

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-02-23  5:53 [PATCH net v2 0/2] add support for skb with sk ref cloning Oleksij Rempel
2021-02-23  5:53 ` [PATCH net v2 1/2] skbuff: skb_clone_sk_optional(): add function to always clone a skb and increase refcount on sk if valid Oleksij Rempel
2021-02-23  5:53 ` Oleksij Rempel [this message]
2021-02-23  8:55   ` [PATCH net v2 2/2] can: fix ref count warning if socket was closed before skb was cloned Eric Dumazet

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210223055321.3891-3-o.rempel@pengutronix.de \
    --to=o.rempel@pengutronix.de \
    --cc=davem@davemloft.net \
    --cc=edumazet@google.com \
    --cc=johannes@sipsolutions.net \
    --cc=kernel@pengutronix.de \
    --cc=kuba@kernel.org \
    --cc=linux-can@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-wireless@vger.kernel.org \
    --cc=mkl@pengutronix.de \
    --cc=nautsch2@gmail.com \
    --cc=netdev@vger.kernel.org \
    --cc=robin@protonic.nl \
    --cc=socketcan@hartkopp.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Netdev Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/netdev/0 netdev/git/0.git
	git clone --mirror https://lore.kernel.org/netdev/1 netdev/git/1.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 netdev netdev/ https://lore.kernel.org/netdev \
		netdev@vger.kernel.org
	public-inbox-index netdev

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.netdev


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git