From: Lech Perczak <lech.perczak@gmail.com>
To: netdev@vger.kernel.org, linux-usb@vger.kernel.org
Cc: "Jakub Kicinski" <kuba@kernel.org>,
"Lech Perczak" <lech.perczak@gmail.com>,
"Bjørn Mork" <bjorn@mork.no>
Subject: [PATCH v3] net: usb: qmi_wwan: support ZTE P685M modem
Date: Tue, 23 Feb 2021 19:34:56 +0100 [thread overview]
Message-ID: <20210223183456.6377-1-lech.perczak@gmail.com> (raw)
In-Reply-To: <20210206121322.074ddbd3@kicinski-fedora-pc1c0hjn.dhcp.thefacebook.com>
Now that interface 3 in "option" driver is no longer mapped, add device
ID matching it to qmi_wwan.
The modem is used inside ZTE MF283+ router and carriers identify it as
such.
Interface mapping is:
0: QCDM, 1: AT (PCUI), 2: AT (Modem), 3: QMI, 4: ADB
T: Bus=02 Lev=02 Prnt=02 Port=05 Cnt=01 Dev#= 3 Spd=480 MxCh= 0
D: Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=19d2 ProdID=1275 Rev=f0.00
S: Manufacturer=ZTE,Incorporated
S: Product=ZTE Technologies MSM
S: SerialNumber=P685M510ZTED0000CP&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&0
C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
E: Ad=87(I) Atr=03(Int.) MxPS= 8 Ivl=32ms
E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
Acked-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
---
Now that patch for "option" has landed in 'master' and 'net', resend the second part.
v3: no changes, resend separately again, add Acked-by from Bjørn Mork.
v2: no changes to this patch, resend as series.
drivers/net/usb/qmi_wwan.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c
index 6c3d8c2abd38..17a050521b86 100644
--- a/drivers/net/usb/qmi_wwan.c
+++ b/drivers/net/usb/qmi_wwan.c
@@ -1318,6 +1318,7 @@ static const struct usb_device_id products[] = {
{QMI_FIXED_INTF(0x19d2, 0x1255, 4)},
{QMI_FIXED_INTF(0x19d2, 0x1256, 4)},
{QMI_FIXED_INTF(0x19d2, 0x1270, 5)}, /* ZTE MF667 */
+ {QMI_FIXED_INTF(0x19d2, 0x1275, 3)}, /* ZTE P685M */
{QMI_FIXED_INTF(0x19d2, 0x1401, 2)},
{QMI_FIXED_INTF(0x19d2, 0x1402, 2)}, /* ZTE MF60 */
{QMI_FIXED_INTF(0x19d2, 0x1424, 2)},
--
2.20.1
next prev parent reply other threads:[~2021-02-23 18:36 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-02-05 17:39 [PATCH v2 0/2] usb: add full support for ZTE P685M modem Lech Perczak
2021-02-05 17:39 ` [PATCH v2 1/2] net: usb: qmi_wwan: support " Lech Perczak
2021-02-06 14:19 ` Bjørn Mork
2021-02-06 14:50 ` Lech Perczak
2021-02-06 20:13 ` Jakub Kicinski
2021-02-07 0:54 ` [PATCH v3] usb: serial: option: update interface mapping for ZTE P685M Lech Perczak
2021-02-08 9:51 ` Johan Hovold
2021-02-08 9:35 ` [PATCH v2 1/2] net: usb: qmi_wwan: support ZTE P685M modem Johan Hovold
2021-02-08 17:52 ` Jakub Kicinski
2021-02-09 12:09 ` Johan Hovold
2021-02-23 18:34 ` Lech Perczak [this message]
2021-02-24 18:10 ` [PATCH v3] " patchwork-bot+netdevbpf
2021-03-01 21:13 ` Lech Perczak
2021-03-02 23:12 ` Jakub Kicinski
2021-02-05 17:39 ` [PATCH v2 2/2] usb: serial: option: add full support for ZTE P685M Lech Perczak
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210223183456.6377-1-lech.perczak@gmail.com \
--to=lech.perczak@gmail.com \
--cc=bjorn@mork.no \
--cc=kuba@kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).