netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Joakim Zhang <qiangqing.zhang@nxp.com>
To: peppe.cavallaro@st.com, alexandre.torgue@st.com,
	joabreu@synopsys.com, davem@davemloft.net, kuba@kernel.org,
	f.fainelli@gmail.com, andrew@lunn.ch
Cc: linux-imx@nxp.com, netdev@vger.kernel.org
Subject: [RFC V2 resend net-next 3/3] net: stmmac: dwmac-imx: add platform level clocks management for i.MX
Date: Mon,  1 Mar 2021 18:25:29 +0800	[thread overview]
Message-ID: <20210301102529.18573-4-qiangqing.zhang@nxp.com> (raw)
In-Reply-To: <20210301102529.18573-1-qiangqing.zhang@nxp.com>

Split clocks settings from init callback into clks_config callback,
which could support platform level clocks management.

Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
---
 .../net/ethernet/stmicro/stmmac/dwmac-imx.c   | 60 +++++++++++--------
 1 file changed, 36 insertions(+), 24 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-imx.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-imx.c
index 223f69da7e95..c1a361305a5a 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-imx.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-imx.c
@@ -90,6 +90,32 @@ imx8dxl_set_intf_mode(struct plat_stmmacenet_data *plat_dat)
 	return ret;
 }
 
+static int imx_dwmac_clks_config(void *priv, bool enabled)
+{
+	struct imx_priv_data *dwmac = priv;
+	int ret = 0;
+
+	if (enabled) {
+		ret = clk_prepare_enable(dwmac->clk_mem);
+		if (ret) {
+			dev_err(dwmac->dev, "mem clock enable failed\n");
+			return ret;
+		}
+
+		ret = clk_prepare_enable(dwmac->clk_tx);
+		if (ret) {
+			dev_err(dwmac->dev, "tx clock enable failed\n");
+			clk_disable_unprepare(dwmac->clk_mem);
+			return ret;
+		}
+	} else {
+		clk_disable_unprepare(dwmac->clk_tx);
+		clk_disable_unprepare(dwmac->clk_mem);
+	}
+
+	return ret;
+}
+
 static int imx_dwmac_init(struct platform_device *pdev, void *priv)
 {
 	struct plat_stmmacenet_data *plat_dat;
@@ -98,39 +124,18 @@ static int imx_dwmac_init(struct platform_device *pdev, void *priv)
 
 	plat_dat = dwmac->plat_dat;
 
-	ret = clk_prepare_enable(dwmac->clk_mem);
-	if (ret) {
-		dev_err(&pdev->dev, "mem clock enable failed\n");
-		return ret;
-	}
-
-	ret = clk_prepare_enable(dwmac->clk_tx);
-	if (ret) {
-		dev_err(&pdev->dev, "tx clock enable failed\n");
-		goto clk_tx_en_failed;
-	}
-
 	if (dwmac->ops->set_intf_mode) {
 		ret = dwmac->ops->set_intf_mode(plat_dat);
 		if (ret)
-			goto intf_mode_failed;
+			return ret;
 	}
 
 	return 0;
-
-intf_mode_failed:
-	clk_disable_unprepare(dwmac->clk_tx);
-clk_tx_en_failed:
-	clk_disable_unprepare(dwmac->clk_mem);
-	return ret;
 }
 
 static void imx_dwmac_exit(struct platform_device *pdev, void *priv)
 {
-	struct imx_priv_data *dwmac = priv;
-
-	clk_disable_unprepare(dwmac->clk_tx);
-	clk_disable_unprepare(dwmac->clk_mem);
+	/* nothing to do now */
 }
 
 static void imx_dwmac_fix_speed(void *priv, unsigned int speed)
@@ -249,10 +254,15 @@ static int imx_dwmac_probe(struct platform_device *pdev)
 	plat_dat->addr64 = dwmac->ops->addr_width;
 	plat_dat->init = imx_dwmac_init;
 	plat_dat->exit = imx_dwmac_exit;
+	plat_dat->clks_config = imx_dwmac_clks_config;
 	plat_dat->fix_mac_speed = imx_dwmac_fix_speed;
 	plat_dat->bsp_priv = dwmac;
 	dwmac->plat_dat = plat_dat;
 
+	ret = imx_dwmac_clks_config(dwmac, true);
+	if (ret)
+		goto err_clks_config;
+
 	ret = imx_dwmac_init(pdev, dwmac);
 	if (ret)
 		goto err_dwmac_init;
@@ -263,9 +273,11 @@ static int imx_dwmac_probe(struct platform_device *pdev)
 
 	return 0;
 
-err_dwmac_init:
 err_drv_probe:
 	imx_dwmac_exit(pdev, plat_dat->bsp_priv);
+err_dwmac_init:
+	imx_dwmac_clks_config(dwmac, false);
+err_clks_config:
 err_parse_dt:
 err_match_data:
 	stmmac_remove_config_dt(pdev, plat_dat);
-- 
2.17.1


  parent reply	other threads:[~2021-03-01 10:28 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-03-01 10:25 [RFC V2 resend net-next 0/3] net: stmmac: implement clocks management Joakim Zhang
2021-03-01 10:25 ` [RFC V2 resend net-next 1/3] net: stmmac: add clocks management for gmac driver Joakim Zhang
2021-03-03  1:23   ` Andrew Lunn
2021-03-03  4:13     ` Joakim Zhang
2021-03-01 10:25 ` [RFC V2 resend net-next 2/3] net: stmmac: add platform level clocks management Joakim Zhang
2021-03-03  1:25   ` Andrew Lunn
2021-03-01 10:25 ` Joakim Zhang [this message]
2021-03-03  1:27   ` [RFC V2 resend net-next 3/3] net: stmmac: dwmac-imx: add platform level clocks management for i.MX Andrew Lunn

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210301102529.18573-4-qiangqing.zhang@nxp.com \
    --to=qiangqing.zhang@nxp.com \
    --cc=alexandre.torgue@st.com \
    --cc=andrew@lunn.ch \
    --cc=davem@davemloft.net \
    --cc=f.fainelli@gmail.com \
    --cc=joabreu@synopsys.com \
    --cc=kuba@kernel.org \
    --cc=linux-imx@nxp.com \
    --cc=netdev@vger.kernel.org \
    --cc=peppe.cavallaro@st.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).