netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Vladimir Oltean <olteanv@gmail.com>
To: "David S . Miller" <davem@davemloft.net>,
	Jakub Kicinski <kuba@kernel.org>,
	netdev@vger.kernel.org
Cc: Michael Walle <michael@walle.cc>,
	Claudiu Manoil <claudiu.manoil@nxp.com>,
	Alexandru Marginean <alexandru.marginean@nxp.com>,
	Andrew Lunn <andrew@lunn.ch>,
	Vladimir Oltean <vladimir.oltean@nxp.com>,
	Jesse Brandeburg <jesse.brandeburg@intel.com>
Subject: [PATCH v3 net 2/8] net: enetc: initialize RFS/RSS memories for unused ports too
Date: Mon,  1 Mar 2021 13:18:12 +0200	[thread overview]
Message-ID: <20210301111818.2081582-3-olteanv@gmail.com> (raw)
In-Reply-To: <20210301111818.2081582-1-olteanv@gmail.com>

From: Vladimir Oltean <vladimir.oltean@nxp.com>

Michael reports that since linux-next-20210211, the AER messages for ECC
errors have started reappearing, and this time they can be reliably
reproduced with the first ping on one of his LS1028A boards.

$ ping 1[   33.258069] pcieport 0000:00:1f.0: AER: Multiple Corrected error received: 0000:00:00.0
72.16.0.1
PING [   33.267050] pcieport 0000:00:1f.0: AER: can't find device of ID0000
172.16.0.1 (172.16.0.1): 56 data bytes
64 bytes from 172.16.0.1: seq=0 ttl=64 time=17.124 ms
64 bytes from 172.16.0.1: seq=1 ttl=64 time=0.273 ms

$ devmem 0x1f8010e10 32
0xC0000006

It isn't clear why this is necessary, but it seems that for the errors
to go away, we must clear the entire RFS and RSS memory, not just for
the ports in use.

Sadly the code is structured in such a way that we can't have unified
logic for the used and unused ports. For the minimal initialization of
an unused port, we need just to enable and ioremap the PF memory space,
and a control buffer descriptor ring. Unused ports must then free the
CBDR because the driver will exit, but used ports can not pick up from
where that code path left, since the CBDR API does not reinitialize a
ring when setting it up, so its producer and consumer indices are out of
sync between the software and hardware state. So a separate
enetc_init_unused_port function was created, and it gets called right
after the PF memory space is enabled.

Fixes: 07bf34a50e32 ("net: enetc: initialize the RFS and RSS memories")
Reported-by: Michael Walle <michael@walle.cc>
Cc: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Michael Walle <michael@walle.cc>
---
Changes in v3:
Leave the moving around of cbdr functions to a later refactoring patch,
and keep the bug fix minimal.

Changes in v2:
None.

 drivers/net/ethernet/freescale/enetc/enetc.c  |  8 ++---
 drivers/net/ethernet/freescale/enetc/enetc.h  |  4 +++
 .../net/ethernet/freescale/enetc/enetc_pf.c   | 33 ++++++++++++++++---
 3 files changed, 36 insertions(+), 9 deletions(-)

diff --git a/drivers/net/ethernet/freescale/enetc/enetc.c b/drivers/net/ethernet/freescale/enetc/enetc.c
index fdb6b9e8da78..eb45830a1667 100644
--- a/drivers/net/ethernet/freescale/enetc/enetc.c
+++ b/drivers/net/ethernet/freescale/enetc/enetc.c
@@ -984,7 +984,7 @@ static void enetc_free_rxtx_rings(struct enetc_ndev_priv *priv)
 		enetc_free_tx_ring(priv->tx_ring[i]);
 }
 
-static int enetc_alloc_cbdr(struct device *dev, struct enetc_cbdr *cbdr)
+int enetc_alloc_cbdr(struct device *dev, struct enetc_cbdr *cbdr)
 {
 	int size = cbdr->bd_count * sizeof(struct enetc_cbd);
 
@@ -1005,7 +1005,7 @@ static int enetc_alloc_cbdr(struct device *dev, struct enetc_cbdr *cbdr)
 	return 0;
 }
 
-static void enetc_free_cbdr(struct device *dev, struct enetc_cbdr *cbdr)
+void enetc_free_cbdr(struct device *dev, struct enetc_cbdr *cbdr)
 {
 	int size = cbdr->bd_count * sizeof(struct enetc_cbd);
 
@@ -1013,7 +1013,7 @@ static void enetc_free_cbdr(struct device *dev, struct enetc_cbdr *cbdr)
 	cbdr->bd_base = NULL;
 }
 
-static void enetc_setup_cbdr(struct enetc_hw *hw, struct enetc_cbdr *cbdr)
+void enetc_setup_cbdr(struct enetc_hw *hw, struct enetc_cbdr *cbdr)
 {
 	/* set CBDR cache attributes */
 	enetc_wr(hw, ENETC_SICAR2,
@@ -1033,7 +1033,7 @@ static void enetc_setup_cbdr(struct enetc_hw *hw, struct enetc_cbdr *cbdr)
 	cbdr->cir = hw->reg + ENETC_SICBDRCIR;
 }
 
-static void enetc_clear_cbdr(struct enetc_hw *hw)
+void enetc_clear_cbdr(struct enetc_hw *hw)
 {
 	enetc_wr(hw, ENETC_SICBDRMR, 0);
 }
diff --git a/drivers/net/ethernet/freescale/enetc/enetc.h b/drivers/net/ethernet/freescale/enetc/enetc.h
index f8275cef3b5c..8b380fc13314 100644
--- a/drivers/net/ethernet/freescale/enetc/enetc.h
+++ b/drivers/net/ethernet/freescale/enetc/enetc.h
@@ -310,6 +310,10 @@ int enetc_setup_tc(struct net_device *ndev, enum tc_setup_type type,
 void enetc_set_ethtool_ops(struct net_device *ndev);
 
 /* control buffer descriptor ring (CBDR) */
+int enetc_alloc_cbdr(struct device *dev, struct enetc_cbdr *cbdr);
+void enetc_free_cbdr(struct device *dev, struct enetc_cbdr *cbdr);
+void enetc_setup_cbdr(struct enetc_hw *hw, struct enetc_cbdr *cbdr);
+void enetc_clear_cbdr(struct enetc_hw *hw);
 int enetc_set_mac_flt_entry(struct enetc_si *si, int index,
 			    char *mac_addr, int si_map);
 int enetc_clear_mac_flt_entry(struct enetc_si *si, int index);
diff --git a/drivers/net/ethernet/freescale/enetc/enetc_pf.c b/drivers/net/ethernet/freescale/enetc/enetc_pf.c
index d02ecb2e46ae..62ba4bf56f0d 100644
--- a/drivers/net/ethernet/freescale/enetc/enetc_pf.c
+++ b/drivers/net/ethernet/freescale/enetc/enetc_pf.c
@@ -1041,6 +1041,26 @@ static int enetc_init_port_rss_memory(struct enetc_si *si)
 	return err;
 }
 
+static void enetc_init_unused_port(struct enetc_si *si)
+{
+	struct device *dev = &si->pdev->dev;
+	struct enetc_hw *hw = &si->hw;
+	int err;
+
+	si->cbd_ring.bd_count = ENETC_CBDR_DEFAULT_SIZE;
+	err = enetc_alloc_cbdr(dev, &si->cbd_ring);
+	if (err)
+		return;
+
+	enetc_setup_cbdr(hw, &si->cbd_ring);
+
+	enetc_init_port_rfs_memory(si);
+	enetc_init_port_rss_memory(si);
+
+	enetc_clear_cbdr(hw);
+	enetc_free_cbdr(dev, &si->cbd_ring);
+}
+
 static int enetc_pf_probe(struct pci_dev *pdev,
 			  const struct pci_device_id *ent)
 {
@@ -1051,11 +1071,6 @@ static int enetc_pf_probe(struct pci_dev *pdev,
 	struct enetc_pf *pf;
 	int err;
 
-	if (node && !of_device_is_available(node)) {
-		dev_info(&pdev->dev, "device is disabled, skipping\n");
-		return -ENODEV;
-	}
-
 	err = enetc_pci_probe(pdev, KBUILD_MODNAME, sizeof(*pf));
 	if (err) {
 		dev_err(&pdev->dev, "PCI probing failed\n");
@@ -1069,6 +1084,13 @@ static int enetc_pf_probe(struct pci_dev *pdev,
 		goto err_map_pf_space;
 	}
 
+	if (node && !of_device_is_available(node)) {
+		enetc_init_unused_port(si);
+		dev_info(&pdev->dev, "device is disabled, skipping\n");
+		err = -ENODEV;
+		goto err_device_disabled;
+	}
+
 	pf = enetc_si_priv(si);
 	pf->si = si;
 	pf->total_vfs = pci_sriov_get_totalvfs(pdev);
@@ -1151,6 +1173,7 @@ static int enetc_pf_probe(struct pci_dev *pdev,
 	si->ndev = NULL;
 	free_netdev(ndev);
 err_alloc_netdev:
+err_device_disabled:
 err_map_pf_space:
 	enetc_pci_remove(pdev);
 
-- 
2.25.1


  parent reply	other threads:[~2021-03-01 11:19 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-03-01 11:18 [PATCH v3 net 0/8] Fixes for NXP ENETC driver Vladimir Oltean
2021-03-01 11:18 ` [PATCH v3 net 1/8] net: enetc: don't overwrite the RSS indirection table when initializing Vladimir Oltean
2021-03-01 11:18 ` Vladimir Oltean [this message]
2021-03-01 11:18 ` [PATCH v3 net 3/8] net: enetc: take the MDIO lock only once per NAPI poll cycle Vladimir Oltean
2021-03-01 11:18 ` [PATCH v3 net 4/8] net: enetc: fix incorrect TPID when receiving 802.1ad tagged packets Vladimir Oltean
2021-03-01 11:18 ` [PATCH v3 net 5/8] net: enetc: don't disable VLAN filtering in IFF_PROMISC mode Vladimir Oltean
2021-03-01 11:18 ` [PATCH v3 net 6/8] net: enetc: force the RGMII speed and duplex instead of operating in inband mode Vladimir Oltean
2021-03-01 11:18 ` [PATCH v3 net 7/8] net: enetc: remove bogus write to SIRXIDR from enetc_setup_rxbdr Vladimir Oltean
2021-03-01 11:18 ` [PATCH v3 net 8/8] net: enetc: keep RX ring consumer index in sync with hardware Vladimir Oltean
2021-03-01 13:34   ` Claudiu Manoil
2021-03-01 13:34   ` Vladimir Oltean
2021-03-01 21:40 ` [PATCH v3 net 0/8] Fixes for NXP ENETC driver patchwork-bot+netdevbpf
2021-03-02 11:47   ` Vladimir Oltean

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210301111818.2081582-3-olteanv@gmail.com \
    --to=olteanv@gmail.com \
    --cc=alexandru.marginean@nxp.com \
    --cc=andrew@lunn.ch \
    --cc=claudiu.manoil@nxp.com \
    --cc=davem@davemloft.net \
    --cc=jesse.brandeburg@intel.com \
    --cc=kuba@kernel.org \
    --cc=michael@walle.cc \
    --cc=netdev@vger.kernel.org \
    --cc=vladimir.oltean@nxp.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).