netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Michael S. Tsirkin" <mst@redhat.com>
To: Eric Dumazet <eric.dumazet@gmail.com>
Cc: "David S . Miller" <davem@davemloft.net>,
	Jakub Kicinski <kuba@kernel.org>, netdev <netdev@vger.kernel.org>,
	Eric Dumazet <edumazet@google.com>,
	Xuan Zhuo <xuanzhuo@linux.alibaba.com>,
	Jason Wang <jasowang@redhat.com>,
	virtualization@lists.linux-foundation.org
Subject: Re: [PATCH net] virtio_net: Do not pull payload in skb->head
Date: Wed, 7 Apr 2021 14:09:56 -0400	[thread overview]
Message-ID: <20210407140333-mutt-send-email-mst@kernel.org> (raw)
In-Reply-To: <20210402132602.3659282-1-eric.dumazet@gmail.com>

On Fri, Apr 02, 2021 at 06:26:02AM -0700, Eric Dumazet wrote:
> From: Eric Dumazet <edumazet@google.com>
> 
> Xuan Zhuo reported that commit 3226b158e67c ("net: avoid 32 x truesize
> under-estimation for tiny skbs") brought  a ~10% performance drop.
> 
> The reason for the performance drop was that GRO was forced
> to chain sk_buff (using skb_shinfo(skb)->frag_list), which
> uses more memory but also cause packet consumers to go over
> a lot of overhead handling all the tiny skbs.
> 
> It turns out that virtio_net page_to_skb() has a wrong strategy :
> It allocates skbs with GOOD_COPY_LEN (128) bytes in skb->head, then
> copies 128 bytes from the page, before feeding the packet to GRO stack.
> 
> This was suboptimal before commit 3226b158e67c ("net: avoid 32 x truesize
> under-estimation for tiny skbs") because GRO was using 2 frags per MSS,
> meaning we were not packing MSS with 100% efficiency.
> 
> Fix is to pull only the ethernet header in page_to_skb()
> 
> Then, we change virtio_net_hdr_to_skb() to pull the missing
> headers, instead of assuming they were already pulled by callers.
> 
> This fixes the performance regression, but could also allow virtio_net
> to accept packets with more than 128bytes of headers.
> 
> Many thanks to Xuan Zhuo for his report, and his tests/help.
> 
> Fixes: 3226b158e67c ("net: avoid 32 x truesize under-estimation for tiny skbs")
> Reported-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
> Link: https://www.spinics.net/lists/netdev/msg731397.html
> Co-Developed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
> Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
> Signed-off-by: Eric Dumazet <edumazet@google.com>
> Cc: "Michael S. Tsirkin" <mst@redhat.com>
> Cc: Jason Wang <jasowang@redhat.com>
> Cc: virtualization@lists.linux-foundation.org

Acked-by: Michael S. Tsirkin <mst@redhat.com>

Thanks a lot for looking into this, Eric and Xuan Zhuo !

> ---
>  drivers/net/virtio_net.c   | 10 +++++++---
>  include/linux/virtio_net.h | 14 +++++++++-----
>  2 files changed, 16 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
> index 82e520d2cb1229a0c7b9fd0def3e4a7135536478..0824e6999e49957f7aaf7c990f6259792d42f32b 100644
> --- a/drivers/net/virtio_net.c
> +++ b/drivers/net/virtio_net.c
> @@ -406,9 +406,13 @@ static struct sk_buff *page_to_skb(struct virtnet_info *vi,
>  	offset += hdr_padded_len;
>  	p += hdr_padded_len;
>  
> -	copy = len;
> -	if (copy > skb_tailroom(skb))
> -		copy = skb_tailroom(skb);
> +	/* Copy all frame if it fits skb->head, otherwise
> +	 * we let virtio_net_hdr_to_skb() and GRO pull headers as needed.
> +	 */
> +	if (len <= skb_tailroom(skb))
> +		copy = len;
> +	else
> +		copy = ETH_HLEN + metasize;
>  	skb_put_data(skb, p, copy);
>  
>  	if (metasize) {
> diff --git a/include/linux/virtio_net.h b/include/linux/virtio_net.h
> index 98775d7fa69632e2c2da30b581a666f7fbb94b64..b465f8f3e554f27ced45c35f54f113cf6dce1f07 100644
> --- a/include/linux/virtio_net.h
> +++ b/include/linux/virtio_net.h
> @@ -65,14 +65,18 @@ static inline int virtio_net_hdr_to_skb(struct sk_buff *skb,
>  	skb_reset_mac_header(skb);
>  
>  	if (hdr->flags & VIRTIO_NET_HDR_F_NEEDS_CSUM) {
> -		u16 start = __virtio16_to_cpu(little_endian, hdr->csum_start);
> -		u16 off = __virtio16_to_cpu(little_endian, hdr->csum_offset);
> +		u32 start = __virtio16_to_cpu(little_endian, hdr->csum_start);
> +		u32 off = __virtio16_to_cpu(little_endian, hdr->csum_offset);
> +		u32 needed = start + max_t(u32, thlen, off + sizeof(__sum16));
> +
> +		if (!pskb_may_pull(skb, needed))
> +			return -EINVAL;
>  
>  		if (!skb_partial_csum_set(skb, start, off))
>  			return -EINVAL;
>  
>  		p_off = skb_transport_offset(skb) + thlen;
> -		if (p_off > skb_headlen(skb))
> +		if (!pskb_may_pull(skb, p_off))
>  			return -EINVAL;
>  	} else {
>  		/* gso packets without NEEDS_CSUM do not set transport_offset.
> @@ -102,14 +106,14 @@ static inline int virtio_net_hdr_to_skb(struct sk_buff *skb,
>  			}
>  
>  			p_off = keys.control.thoff + thlen;
> -			if (p_off > skb_headlen(skb) ||
> +			if (!pskb_may_pull(skb, p_off) ||
>  			    keys.basic.ip_proto != ip_proto)
>  				return -EINVAL;
>  
>  			skb_set_transport_header(skb, keys.control.thoff);
>  		} else if (gso_type) {
>  			p_off = thlen;
> -			if (p_off > skb_headlen(skb))
> +			if (!pskb_may_pull(skb, p_off))
>  				return -EINVAL;
>  		}
>  	}
> -- 
> 2.31.0.208.g409f899ff0-goog


  parent reply	other threads:[~2021-04-07 18:10 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-04-02 13:26 [PATCH net] virtio_net: Do not pull payload in skb->head Eric Dumazet
2021-04-06  2:03 ` Jason Wang
2021-04-07 18:09 ` Michael S. Tsirkin [this message]
2021-04-11 13:43 ` Guenter Roeck
2021-04-11 15:06   ` Eric Dumazet
2021-04-11 20:37     ` Guenter Roeck
2021-04-11 21:23       ` Eric Dumazet
2021-04-11 21:32         ` Guenter Roeck
2021-04-11 21:43           ` Eric Dumazet
2021-04-11 22:07             ` Guenter Roeck
2021-04-12  5:48               ` Eric Dumazet
2021-04-12  5:53                 ` Eric Dumazet
2021-04-12  6:23                   ` Guenter Roeck
2021-04-12  6:37                     ` Eric Dumazet
2021-04-11 22:20             ` Guenter Roeck

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210407140333-mutt-send-email-mst@kernel.org \
    --to=mst@redhat.com \
    --cc=davem@davemloft.net \
    --cc=edumazet@google.com \
    --cc=eric.dumazet@gmail.com \
    --cc=jasowang@redhat.com \
    --cc=kuba@kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=virtualization@lists.linux-foundation.org \
    --cc=xuanzhuo@linux.alibaba.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).