netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Tony Nguyen <anthony.l.nguyen@intel.com>
To: davem@davemloft.net, kuba@kernel.org
Cc: Andre Guedes <andre.guedes@intel.com>,
	netdev@vger.kernel.org, sassmann@redhat.com,
	anthony.l.nguyen@intel.com, bjorn.topel@intel.com,
	magnus.karlsson@intel.com, maciej.fijalkowski@intel.com,
	sasha.neftin@intel.com, vitaly.lifshits@intel.com,
	Vedang Patel <vedang.patel@intel.com>,
	Jithu Joseph <jithu.joseph@intel.com>,
	Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com>
Subject: [PATCH net-next 7/9] igc: Replace IGC_TX_FLAGS_XDP flag by an enum
Date: Fri,  9 Apr 2021 09:43:49 -0700	[thread overview]
Message-ID: <20210409164351.188953-8-anthony.l.nguyen@intel.com> (raw)
In-Reply-To: <20210409164351.188953-1-anthony.l.nguyen@intel.com>

From: Andre Guedes <andre.guedes@intel.com>

Up to this point, Tx buffers are associated with either a skb or a xdpf,
and the IGC_TX_FLAGS_XDP flag was enough to distinguish between these
two case. However, with upcoming patches that will add AF_XDP zero-copy
support, a third case will be introduced so this flag-based approach
won't fit well.

In preparation to land AF_XDP zero-copy support, replace the
IGC_TX_FLAGS_XDP flag by an enum which will be extended once zero-copy
support is introduced to the driver.

Signed-off-by: Andre Guedes <andre.guedes@intel.com>
Signed-off-by: Vedang Patel <vedang.patel@intel.com>
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
---
 drivers/net/ethernet/intel/igc/igc.h      |  8 ++++++--
 drivers/net/ethernet/intel/igc/igc_main.c | 25 ++++++++++++++++++-----
 2 files changed, 26 insertions(+), 7 deletions(-)

diff --git a/drivers/net/ethernet/intel/igc/igc.h b/drivers/net/ethernet/intel/igc/igc.h
index 91493a73355d..86eb1686ec43 100644
--- a/drivers/net/ethernet/intel/igc/igc.h
+++ b/drivers/net/ethernet/intel/igc/igc.h
@@ -377,8 +377,6 @@ enum igc_tx_flags {
 	/* olinfo flags */
 	IGC_TX_FLAGS_IPV4	= 0x10,
 	IGC_TX_FLAGS_CSUM	= 0x20,
-
-	IGC_TX_FLAGS_XDP	= 0x100,
 };
 
 enum igc_boards {
@@ -395,12 +393,18 @@ enum igc_boards {
 #define TXD_USE_COUNT(S)	DIV_ROUND_UP((S), IGC_MAX_DATA_PER_TXD)
 #define DESC_NEEDED	(MAX_SKB_FRAGS + 4)
 
+enum igc_tx_buffer_type {
+	IGC_TX_BUFFER_TYPE_SKB,
+	IGC_TX_BUFFER_TYPE_XDP,
+};
+
 /* wrapper around a pointer to a socket buffer,
  * so a DMA handle can be stored along with the buffer
  */
 struct igc_tx_buffer {
 	union igc_adv_tx_desc *next_to_watch;
 	unsigned long time_stamp;
+	enum igc_tx_buffer_type type;
 	union {
 		struct sk_buff *skb;
 		struct xdp_frame *xdpf;
diff --git a/drivers/net/ethernet/intel/igc/igc_main.c b/drivers/net/ethernet/intel/igc/igc_main.c
index 5bf6d8463700..b34b45afc732 100644
--- a/drivers/net/ethernet/intel/igc/igc_main.c
+++ b/drivers/net/ethernet/intel/igc/igc_main.c
@@ -191,10 +191,17 @@ static void igc_clean_tx_ring(struct igc_ring *tx_ring)
 	while (i != tx_ring->next_to_use) {
 		union igc_adv_tx_desc *eop_desc, *tx_desc;
 
-		if (tx_buffer->tx_flags & IGC_TX_FLAGS_XDP)
+		switch (tx_buffer->type) {
+		case IGC_TX_BUFFER_TYPE_XDP:
 			xdp_return_frame(tx_buffer->xdpf);
-		else
+			break;
+		case IGC_TX_BUFFER_TYPE_SKB:
 			dev_kfree_skb_any(tx_buffer->skb);
+			break;
+		default:
+			netdev_warn_once(tx_ring->netdev, "Unknown Tx buffer type\n");
+			break;
+		}
 
 		igc_unmap_tx_buffer(tx_ring->dev, tx_buffer);
 
@@ -1360,6 +1367,7 @@ static netdev_tx_t igc_xmit_frame_ring(struct sk_buff *skb,
 
 	/* record the location of the first descriptor for this packet */
 	first = &tx_ring->tx_buffer_info[tx_ring->next_to_use];
+	first->type = IGC_TX_BUFFER_TYPE_SKB;
 	first->skb = skb;
 	first->bytecount = skb->len;
 	first->gso_segs = 1;
@@ -1943,8 +1951,8 @@ static int igc_xdp_init_tx_buffer(struct igc_tx_buffer *buffer,
 		return -ENOMEM;
 	}
 
+	buffer->type = IGC_TX_BUFFER_TYPE_XDP;
 	buffer->xdpf = xdpf;
-	buffer->tx_flags = IGC_TX_FLAGS_XDP;
 	buffer->protocol = 0;
 	buffer->bytecount = xdpf->len;
 	buffer->gso_segs = 1;
@@ -2308,10 +2316,17 @@ static bool igc_clean_tx_irq(struct igc_q_vector *q_vector, int napi_budget)
 		total_bytes += tx_buffer->bytecount;
 		total_packets += tx_buffer->gso_segs;
 
-		if (tx_buffer->tx_flags & IGC_TX_FLAGS_XDP)
+		switch (tx_buffer->type) {
+		case IGC_TX_BUFFER_TYPE_XDP:
 			xdp_return_frame(tx_buffer->xdpf);
-		else
+			break;
+		case IGC_TX_BUFFER_TYPE_SKB:
 			napi_consume_skb(tx_buffer->skb, napi_budget);
+			break;
+		default:
+			netdev_warn_once(tx_ring->netdev, "Unknown Tx buffer type\n");
+			break;
+		}
 
 		igc_unmap_tx_buffer(tx_ring->dev, tx_buffer);
 
-- 
2.26.2


  parent reply	other threads:[~2021-04-09 16:42 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-04-09 16:43 [PATCH net-next 0/9][pull request] 1GbE Intel Wired LAN Driver Updates 2021-04-09 Tony Nguyen
2021-04-09 16:43 ` [PATCH net-next 1/9] igc: Move igc_xdp_is_enabled() Tony Nguyen
2021-04-09 16:43 ` [PATCH net-next 2/9] igc: Refactor __igc_xdp_run_prog() Tony Nguyen
2021-04-09 16:43 ` [PATCH net-next 3/9] igc: Refactor igc_clean_rx_ring() Tony Nguyen
2021-04-09 16:43 ` [PATCH net-next 4/9] igc: Refactor XDP rxq info registration Tony Nguyen
2021-04-09 16:43 ` [PATCH net-next 5/9] igc: Introduce TX/RX stats helpers Tony Nguyen
2021-04-09 16:43 ` [PATCH net-next 6/9] igc: Introduce igc_unmap_tx_buffer() helper Tony Nguyen
2021-04-09 16:43 ` Tony Nguyen [this message]
2021-04-09 16:43 ` [PATCH net-next 8/9] igc: Enable RX via AF_XDP zero-copy Tony Nguyen
2021-04-10  0:36   ` Jakub Kicinski
2021-04-14 23:14     ` Joseph, Jithu
2021-04-14 23:25       ` Jakub Kicinski
2021-04-14 23:59         ` Joseph, Jithu
2021-04-15  0:31           ` Jakub Kicinski
2021-04-09 16:43 ` [PATCH net-next 9/9] igc: Enable TX " Tony Nguyen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210409164351.188953-8-anthony.l.nguyen@intel.com \
    --to=anthony.l.nguyen@intel.com \
    --cc=andre.guedes@intel.com \
    --cc=bjorn.topel@intel.com \
    --cc=davem@davemloft.net \
    --cc=dvorax.fuxbrumer@linux.intel.com \
    --cc=jithu.joseph@intel.com \
    --cc=kuba@kernel.org \
    --cc=maciej.fijalkowski@intel.com \
    --cc=magnus.karlsson@intel.com \
    --cc=netdev@vger.kernel.org \
    --cc=sasha.neftin@intel.com \
    --cc=sassmann@redhat.com \
    --cc=vedang.patel@intel.com \
    --cc=vitaly.lifshits@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).