On 14.04.2021 19:35:19, Aswath Govindraju wrote:
> --- a/drivers/phy/Kconfig
> +++ b/drivers/phy/Kconfig
> @@ -61,6 +61,15 @@ config USB_LGM_PHY
>  	  interface to interact with USB GEN-II and USB 3.x PHY that is part
>  	  of the Intel network SOC.
>  
> +config PHY_CAN_TRANSCEIVER
> +	tristate "CAN transceiver PHY"
> +	select GENERIC_PHY
> +	help
> +	  This option enables support for CAN transceivers as a PHY. This
> +	  driver provides function for putting the transceivers in various
> +	  functional modes using gpios and sets the attribute max link
> +	  rate, for mcan drivers.
> +
>  source "drivers/phy/allwinner/Kconfig"
>  source "drivers/phy/amlogic/Kconfig"
>  source "drivers/phy/broadcom/Kconfig"
> diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
> index adac1b1a39d1..9c66101c9605 100644
> --- a/drivers/phy/Makefile
> +++ b/drivers/phy/Makefile
> @@ -9,6 +9,7 @@ obj-$(CONFIG_PHY_LPC18XX_USB_OTG)	+= phy-lpc18xx-usb-otg.o
>  obj-$(CONFIG_PHY_XGENE)			+= phy-xgene.o
>  obj-$(CONFIG_PHY_PISTACHIO_USB)		+= phy-pistachio-usb.o
>  obj-$(CONFIG_USB_LGM_PHY)		+= phy-lgm-usb.o
> +obj-$(CONFIG_PHY_CAN_TRANSCEIVER)	+= phy-can-transceiver.o
>  obj-y					+= allwinner/	\
>  					   amlogic/	\
>  					   broadcom/	\

I'm not sure how the phy framework handles this, but I assume it's
alphabetically sorted, too.

Marc

-- 
Pengutronix e.K.                 | Marc Kleine-Budde           |
Embedded Linux                   | https://www.pengutronix.de  |
Vertretung West/Dortmund         | Phone: +49-231-2826-924     |
Amtsgericht Hildesheim, HRA 2686 | Fax:   +49-5121-206917-5555 |