netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Oleksij Rempel <o.rempel@pengutronix.de>
To: Shawn Guo <shawnguo@kernel.org>,
	Sascha Hauer <s.hauer@pengutronix.de>,
	Andrew Lunn <andrew@lunn.ch>,
	Florian Fainelli <f.fainelli@gmail.com>,
	Heiner Kallweit <hkallweit1@gmail.com>,
	Fugang Duan <fugang.duan@nxp.com>
Cc: Oleksij Rempel <o.rempel@pengutronix.de>,
	Randy Dunlap <rdunlap@infradead.org>,
	kernel@pengutronix.de, netdev@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, linux-imx@nxp.com,
	Fabio Estevam <festevam@gmail.com>,
	David Jander <david@protonic.nl>,
	Russell King <linux@armlinux.org.uk>,
	Philippe Schenker <philippe.schenker@toradex.com>
Subject: [PATCH net-next v1 1/1] net: selftest: fix build issue if INET is disabled
Date: Wed, 28 Apr 2021 15:09:46 +0200	[thread overview]
Message-ID: <20210428130947.29649-1-o.rempel@pengutronix.de> (raw)

In case ethernet driver is enabled and INET is disabled, selftest will
fail to build.

Reported-by: Randy Dunlap <rdunlap@infradead.org>
Fixes: 3e1e58d64c3d ("net: add generic selftest support")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
 drivers/net/ethernet/atheros/Kconfig   |  2 +-
 drivers/net/ethernet/freescale/Kconfig |  2 +-
 include/net/selftests.h                | 19 +++++++++++++++++++
 net/Kconfig                            |  2 +-
 net/core/Makefile                      |  2 +-
 net/dsa/Kconfig                        |  2 +-
 6 files changed, 24 insertions(+), 5 deletions(-)

diff --git a/drivers/net/ethernet/atheros/Kconfig b/drivers/net/ethernet/atheros/Kconfig
index 6842b74b0696..482c58c4c584 100644
--- a/drivers/net/ethernet/atheros/Kconfig
+++ b/drivers/net/ethernet/atheros/Kconfig
@@ -20,8 +20,8 @@ if NET_VENDOR_ATHEROS
 config AG71XX
 	tristate "Atheros AR7XXX/AR9XXX built-in ethernet mac support"
 	depends on ATH79
-	select NET_SELFTESTS
 	select PHYLINK
+	imply NET_SELFTESTS
 	help
 	  If you wish to compile a kernel for AR7XXX/91XXX and enable
 	  ethernet support, then you should always answer Y to this.
diff --git a/drivers/net/ethernet/freescale/Kconfig b/drivers/net/ethernet/freescale/Kconfig
index 3d937b4650b2..2d1abdd58fab 100644
--- a/drivers/net/ethernet/freescale/Kconfig
+++ b/drivers/net/ethernet/freescale/Kconfig
@@ -26,8 +26,8 @@ config FEC
 		   ARCH_MXC || SOC_IMX28 || COMPILE_TEST)
 	default ARCH_MXC || SOC_IMX28 if ARM
 	select CRC32
-	select NET_SELFTESTS
 	select PHYLIB
+	imply NET_SELFTESTS
 	imply PTP_1588_CLOCK
 	help
 	  Say Y here if you want to use the built-in 10/100 Fast ethernet
diff --git a/include/net/selftests.h b/include/net/selftests.h
index 9993b9498cf3..61926c33a022 100644
--- a/include/net/selftests.h
+++ b/include/net/selftests.h
@@ -4,9 +4,28 @@
 
 #include <linux/ethtool.h>
 
+#if IS_ENABLED(CONFIG_NET_SELFTESTS)
+
 void net_selftest(struct net_device *ndev, struct ethtool_test *etest,
 		  u64 *buf);
 int net_selftest_get_count(void);
 void net_selftest_get_strings(u8 *data);
 
+#else
+
+static inline void net_selftest(struct net_device *ndev, struct ethtool_test *etest,
+		  u64 *buf)
+{
+}
+
+static inline int net_selftest_get_count(void)
+{
+	return 0;
+}
+
+static inline void net_selftest_get_strings(u8 *data)
+{
+}
+
+#endif
 #endif /* _NET_SELFTESTS */
diff --git a/net/Kconfig b/net/Kconfig
index 8d955195c069..f5ee7c65e6b4 100644
--- a/net/Kconfig
+++ b/net/Kconfig
@@ -431,7 +431,7 @@ config SOCK_VALIDATE_XMIT
 
 config NET_SELFTESTS
 	def_tristate PHYLIB
-	depends on PHYLIB
+	depends on PHYLIB && INET
 
 config NET_SOCK_MSG
 	bool
diff --git a/net/core/Makefile b/net/core/Makefile
index 1a6168d8f23b..f7f16650fe9e 100644
--- a/net/core/Makefile
+++ b/net/core/Makefile
@@ -21,6 +21,7 @@ obj-$(CONFIG_NETPOLL) += netpoll.o
 obj-$(CONFIG_FIB_RULES) += fib_rules.o
 obj-$(CONFIG_TRACEPOINTS) += net-traces.o
 obj-$(CONFIG_NET_DROP_MONITOR) += drop_monitor.o
+obj-$(CONFIG_NET_SELFTESTS) += selftests.o
 obj-$(CONFIG_NETWORK_PHY_TIMESTAMPING) += timestamping.o
 obj-$(CONFIG_NET_PTP_CLASSIFY) += ptp_classifier.o
 obj-$(CONFIG_CGROUP_NET_PRIO) += netprio_cgroup.o
@@ -33,7 +34,6 @@ obj-$(CONFIG_NET_DEVLINK) += devlink.o
 obj-$(CONFIG_GRO_CELLS) += gro_cells.o
 obj-$(CONFIG_FAILOVER) += failover.o
 ifeq ($(CONFIG_INET),y)
-obj-$(CONFIG_NET_SELFTESTS) += selftests.o
 obj-$(CONFIG_NET_SOCK_MSG) += skmsg.o
 obj-$(CONFIG_BPF_SYSCALL) += sock_map.o
 endif
diff --git a/net/dsa/Kconfig b/net/dsa/Kconfig
index cbc2bd643ab2..183e27b50202 100644
--- a/net/dsa/Kconfig
+++ b/net/dsa/Kconfig
@@ -9,7 +9,7 @@ menuconfig NET_DSA
 	select NET_SWITCHDEV
 	select PHYLINK
 	select NET_DEVLINK
-	select NET_SELFTESTS
+	imply NET_SELFTESTS
 	help
 	  Say Y if you want to enable support for the hardware switches supported
 	  by the Distributed Switch Architecture.
-- 
2.29.2


             reply	other threads:[~2021-04-28 13:10 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-04-28 13:09 Oleksij Rempel [this message]
2021-04-28 15:31 ` [PATCH net-next v1 1/1] net: selftest: fix build issue if INET is disabled Randy Dunlap
2021-04-28 15:45 ` Florian Fainelli
2021-04-28 22:25 ` Jakub Kicinski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210428130947.29649-1-o.rempel@pengutronix.de \
    --to=o.rempel@pengutronix.de \
    --cc=andrew@lunn.ch \
    --cc=david@protonic.nl \
    --cc=f.fainelli@gmail.com \
    --cc=festevam@gmail.com \
    --cc=fugang.duan@nxp.com \
    --cc=hkallweit1@gmail.com \
    --cc=kernel@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-imx@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@armlinux.org.uk \
    --cc=netdev@vger.kernel.org \
    --cc=philippe.schenker@toradex.com \
    --cc=rdunlap@infradead.org \
    --cc=s.hauer@pengutronix.de \
    --cc=shawnguo@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).