[PATCH AUTOSEL 5.13 045/189] e100: handle eeprom as little endian

From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Jesse Brandeburg <jesse.brandeburg@intel.com>,
	Tony Nguyen <anthony.l.nguyen@intel.com>,
	Sasha Levin <sashal@kernel.org>,
	intel-wired-lan@lists.osuosl.org, netdev@vger.kernel.org
Subject: [PATCH AUTOSEL 5.13 045/189] e100: handle eeprom as little endian
Date: Tue,  6 Jul 2021 07:11:45 -0400	[thread overview]
Message-ID: <20210706111409.2058071-45-sashal@kernel.org> (raw)
In-Reply-To: <20210706111409.2058071-1-sashal@kernel.org>

From: Jesse Brandeburg <jesse.brandeburg@intel.com>

[ Upstream commit d4ef55288aa2e1b76033717242728ac98ddc4721 ]

Sparse tool was warning on some implicit conversions from
little endian data read from the EEPROM on the e100 cards.

Fix these by being explicit about the conversions using
le16_to_cpu().

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/e100.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/intel/e100.c b/drivers/net/ethernet/intel/e100.c
index f8d78af76d7d..1b0958bd24f6 100644
--- a/drivers/net/ethernet/intel/e100.c
+++ b/drivers/net/ethernet/intel/e100.c
@@ -1395,7 +1395,7 @@ static int e100_phy_check_without_mii(struct nic *nic)
 	u8 phy_type;
 	int without_mii;
 
-	phy_type = (nic->eeprom[eeprom_phy_iface] >> 8) & 0x0f;
+	phy_type = (le16_to_cpu(nic->eeprom[eeprom_phy_iface]) >> 8) & 0x0f;
 
 	switch (phy_type) {
 	case NoSuchPhy: /* Non-MII PHY; UNTESTED! */
@@ -1515,7 +1515,7 @@ static int e100_phy_init(struct nic *nic)
 		mdio_write(netdev, nic->mii.phy_id, MII_BMCR, bmcr);
 	} else if ((nic->mac >= mac_82550_D102) || ((nic->flags & ich) &&
 	   (mdio_read(netdev, nic->mii.phy_id, MII_TPISTATUS) & 0x8000) &&
-		(nic->eeprom[eeprom_cnfg_mdix] & eeprom_mdix_enabled))) {
+	   (le16_to_cpu(nic->eeprom[eeprom_cnfg_mdix]) & eeprom_mdix_enabled))) {
 		/* enable/disable MDI/MDI-X auto-switching. */
 		mdio_write(netdev, nic->mii.phy_id, MII_NCONFIG,
 				nic->mii.force_media ? 0 : NCONFIG_AUTO_SWITCH);
@@ -2269,9 +2269,9 @@ static int e100_asf(struct nic *nic)
 {
 	/* ASF can be enabled from eeprom */
 	return (nic->pdev->device >= 0x1050) && (nic->pdev->device <= 0x1057) &&
-	   (nic->eeprom[eeprom_config_asf] & eeprom_asf) &&
-	   !(nic->eeprom[eeprom_config_asf] & eeprom_gcl) &&
-	   ((nic->eeprom[eeprom_smbus_addr] & 0xFF) != 0xFE);
+	   (le16_to_cpu(nic->eeprom[eeprom_config_asf]) & eeprom_asf) &&
+	   !(le16_to_cpu(nic->eeprom[eeprom_config_asf]) & eeprom_gcl) &&
+	   ((le16_to_cpu(nic->eeprom[eeprom_smbus_addr]) & 0xFF) != 0xFE);
 }
 
 static int e100_up(struct nic *nic)
@@ -2926,7 +2926,7 @@ static int e100_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 
 	/* Wol magic packet can be enabled from eeprom */
 	if ((nic->mac >= mac_82558_D101_A4) &&
-	   (nic->eeprom[eeprom_id] & eeprom_id_wol)) {
+	   (le16_to_cpu(nic->eeprom[eeprom_id]) & eeprom_id_wol)) {
 		nic->flags |= wol_magic;
 		device_set_wakeup_enable(&pdev->dev, true);
 	}
-- 
2.30.2

