netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Vladimir Oltean <vladimir.oltean@nxp.com>
To: netdev@vger.kernel.org, Jakub Kicinski <kuba@kernel.org>,
	"David S. Miller" <davem@davemloft.net>
Cc: Andrew Lunn <andrew@lunn.ch>,
	Florian Fainelli <f.fainelli@gmail.com>,
	Vivien Didelot <vivien.didelot@gmail.com>,
	Jiri Pirko <jiri@resnulli.us>, Ido Schimmel <idosch@idosch.org>,
	Tobias Waldekranz <tobias@waldekranz.com>,
	Roopa Prabhu <roopa@nvidia.com>,
	Nikolay Aleksandrov <nikolay@nvidia.com>,
	Stephen Hemminger <stephen@networkplumber.org>,
	bridge@lists.linux-foundation.org,
	Grygorii Strashko <grygorii.strashko@ti.com>,
	Marek Behun <kabel@blackhole.sk>,
	DENG Qingfang <dqfext@gmail.com>
Subject: [PATCH v4 net-next 03/15] mlxsw: spectrum: refactor prechangeupper sanity checks
Date: Mon, 19 Jul 2021 00:44:22 +0300	[thread overview]
Message-ID: <20210718214434.3938850-4-vladimir.oltean@nxp.com> (raw)
In-Reply-To: <20210718214434.3938850-1-vladimir.oltean@nxp.com>

Make more room for extra code in the NETDEV_PRECHANGEUPPER handlers from
mlxsw by moving the existing sanity checks to 2 new dedicated functions.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
---
v2->v3: patch is new
v3->v4: none

 .../net/ethernet/mellanox/mlxsw/spectrum.c    | 272 +++++++++++-------
 1 file changed, 169 insertions(+), 103 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c
index 88699e678544..c1b78878e5cf 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c
@@ -4055,6 +4055,118 @@ static bool mlxsw_sp_bridge_vxlan_is_valid(struct net_device *br_dev,
 	return true;
 }
 
+static int
+mlxsw_sp_prechangeupper_sanity_checks(struct mlxsw_sp *mlxsw_sp,
+				      struct net_device *dev,
+				      struct net_device *lower_dev,
+				      struct net_device *upper_dev,
+				      struct netdev_notifier_changeupper_info *info,
+				      struct netlink_ext_ack *extack)
+{
+	u16 proto;
+
+	if (!is_vlan_dev(upper_dev) &&
+	    !netif_is_lag_master(upper_dev) &&
+	    !netif_is_bridge_master(upper_dev) &&
+	    !netif_is_ovs_master(upper_dev) &&
+	    !netif_is_macvlan(upper_dev)) {
+		NL_SET_ERR_MSG_MOD(extack, "Unknown upper device type");
+		return -EINVAL;
+	}
+
+	if (!info->linking)
+		return 0;
+
+	if (netif_is_bridge_master(upper_dev) &&
+	    !mlxsw_sp_bridge_device_is_offloaded(mlxsw_sp, upper_dev) &&
+	    mlxsw_sp_bridge_has_vxlan(upper_dev) &&
+	    !mlxsw_sp_bridge_vxlan_is_valid(upper_dev, extack))
+		return -EOPNOTSUPP;
+
+	if (netdev_has_any_upper_dev(upper_dev) &&
+	    (!netif_is_bridge_master(upper_dev) ||
+	     !mlxsw_sp_bridge_device_is_offloaded(mlxsw_sp,
+						  upper_dev))) {
+		NL_SET_ERR_MSG_MOD(extack,
+				   "Enslaving a port to a device that already has an upper device is not supported");
+		return -EINVAL;
+	}
+
+	if (netif_is_lag_master(upper_dev) &&
+	    !mlxsw_sp_master_lag_check(mlxsw_sp, upper_dev,
+				       info->upper_info, extack))
+		return -EINVAL;
+
+	if (netif_is_lag_master(upper_dev) && vlan_uses_dev(dev)) {
+		NL_SET_ERR_MSG_MOD(extack,
+				   "Master device is a LAG master and this device has a VLAN");
+		return -EINVAL;
+	}
+
+	if (netif_is_lag_port(dev) && is_vlan_dev(upper_dev) &&
+	    !netif_is_lag_master(vlan_dev_real_dev(upper_dev))) {
+		NL_SET_ERR_MSG_MOD(extack, "Can not put a VLAN on a LAG port");
+		return -EINVAL;
+	}
+
+	if (netif_is_macvlan(upper_dev) &&
+	    !mlxsw_sp_rif_exists(mlxsw_sp, lower_dev)) {
+		NL_SET_ERR_MSG_MOD(extack,
+				   "macvlan is only supported on top of router interfaces");
+		return -EOPNOTSUPP;
+	}
+
+	if (netif_is_ovs_master(upper_dev) && vlan_uses_dev(dev)) {
+		NL_SET_ERR_MSG_MOD(extack,
+				   "Master device is an OVS master and this device has a VLAN");
+		return -EINVAL;
+	}
+
+	if (netif_is_ovs_port(dev) && is_vlan_dev(upper_dev)) {
+		NL_SET_ERR_MSG_MOD(extack, "Can not put a VLAN on an OVS port");
+		return -EINVAL;
+	}
+
+	if (netif_is_bridge_master(upper_dev)) {
+		br_vlan_get_proto(upper_dev, &proto);
+		if (br_vlan_enabled(upper_dev) &&
+		    proto != ETH_P_8021Q && proto != ETH_P_8021AD) {
+			NL_SET_ERR_MSG_MOD(extack,
+					   "Enslaving a port to a bridge with unknown VLAN protocol is not supported");
+			return -EOPNOTSUPP;
+		}
+		if (vlan_uses_dev(lower_dev) &&
+		    br_vlan_enabled(upper_dev) &&
+		    proto == ETH_P_8021AD) {
+			NL_SET_ERR_MSG_MOD(extack,
+					   "Enslaving a port that already has a VLAN upper to an 802.1ad bridge is not supported");
+			return -EOPNOTSUPP;
+		}
+	}
+
+	if (netif_is_bridge_port(lower_dev) && is_vlan_dev(upper_dev)) {
+		struct net_device *br_dev = netdev_master_upper_dev_get(lower_dev);
+
+		if (br_vlan_enabled(br_dev)) {
+			br_vlan_get_proto(br_dev, &proto);
+			if (proto == ETH_P_8021AD) {
+				NL_SET_ERR_MSG_MOD(extack,
+						   "VLAN uppers are not supported on a port enslaved to an 802.1ad bridge");
+				return -EOPNOTSUPP;
+			}
+		}
+	}
+
+	if (is_vlan_dev(upper_dev) &&
+	    ntohs(vlan_dev_vlan_proto(upper_dev)) != ETH_P_8021Q) {
+		NL_SET_ERR_MSG_MOD(extack,
+				   "VLAN uppers are only supported with 802.1q VLAN protocol");
+		return -EOPNOTSUPP;
+	}
+
+	return 0;
+}
+
 static int mlxsw_sp_netdevice_port_upper_event(struct net_device *lower_dev,
 					       struct net_device *dev,
 					       unsigned long event, void *ptr)
@@ -4065,7 +4177,6 @@ static int mlxsw_sp_netdevice_port_upper_event(struct net_device *lower_dev,
 	struct net_device *upper_dev;
 	struct mlxsw_sp *mlxsw_sp;
 	int err = 0;
-	u16 proto;
 
 	mlxsw_sp_port = netdev_priv(dev);
 	mlxsw_sp = mlxsw_sp_port->mlxsw_sp;
@@ -4075,84 +4186,15 @@ static int mlxsw_sp_netdevice_port_upper_event(struct net_device *lower_dev,
 	switch (event) {
 	case NETDEV_PRECHANGEUPPER:
 		upper_dev = info->upper_dev;
-		if (!is_vlan_dev(upper_dev) &&
-		    !netif_is_lag_master(upper_dev) &&
-		    !netif_is_bridge_master(upper_dev) &&
-		    !netif_is_ovs_master(upper_dev) &&
-		    !netif_is_macvlan(upper_dev)) {
-			NL_SET_ERR_MSG_MOD(extack, "Unknown upper device type");
-			return -EINVAL;
-		}
-		if (!info->linking)
-			break;
-		if (netif_is_bridge_master(upper_dev) &&
-		    !mlxsw_sp_bridge_device_is_offloaded(mlxsw_sp, upper_dev) &&
-		    mlxsw_sp_bridge_has_vxlan(upper_dev) &&
-		    !mlxsw_sp_bridge_vxlan_is_valid(upper_dev, extack))
-			return -EOPNOTSUPP;
-		if (netdev_has_any_upper_dev(upper_dev) &&
-		    (!netif_is_bridge_master(upper_dev) ||
-		     !mlxsw_sp_bridge_device_is_offloaded(mlxsw_sp,
-							  upper_dev))) {
-			NL_SET_ERR_MSG_MOD(extack, "Enslaving a port to a device that already has an upper device is not supported");
-			return -EINVAL;
-		}
-		if (netif_is_lag_master(upper_dev) &&
-		    !mlxsw_sp_master_lag_check(mlxsw_sp, upper_dev,
-					       info->upper_info, extack))
-			return -EINVAL;
-		if (netif_is_lag_master(upper_dev) && vlan_uses_dev(dev)) {
-			NL_SET_ERR_MSG_MOD(extack, "Master device is a LAG master and this device has a VLAN");
-			return -EINVAL;
-		}
-		if (netif_is_lag_port(dev) && is_vlan_dev(upper_dev) &&
-		    !netif_is_lag_master(vlan_dev_real_dev(upper_dev))) {
-			NL_SET_ERR_MSG_MOD(extack, "Can not put a VLAN on a LAG port");
-			return -EINVAL;
-		}
-		if (netif_is_macvlan(upper_dev) &&
-		    !mlxsw_sp_rif_exists(mlxsw_sp, lower_dev)) {
-			NL_SET_ERR_MSG_MOD(extack, "macvlan is only supported on top of router interfaces");
-			return -EOPNOTSUPP;
-		}
-		if (netif_is_ovs_master(upper_dev) && vlan_uses_dev(dev)) {
-			NL_SET_ERR_MSG_MOD(extack, "Master device is an OVS master and this device has a VLAN");
-			return -EINVAL;
-		}
-		if (netif_is_ovs_port(dev) && is_vlan_dev(upper_dev)) {
-			NL_SET_ERR_MSG_MOD(extack, "Can not put a VLAN on an OVS port");
-			return -EINVAL;
-		}
-		if (netif_is_bridge_master(upper_dev)) {
-			br_vlan_get_proto(upper_dev, &proto);
-			if (br_vlan_enabled(upper_dev) &&
-			    proto != ETH_P_8021Q && proto != ETH_P_8021AD) {
-				NL_SET_ERR_MSG_MOD(extack, "Enslaving a port to a bridge with unknown VLAN protocol is not supported");
-				return -EOPNOTSUPP;
-			}
-			if (vlan_uses_dev(lower_dev) &&
-			    br_vlan_enabled(upper_dev) &&
-			    proto == ETH_P_8021AD) {
-				NL_SET_ERR_MSG_MOD(extack, "Enslaving a port that already has a VLAN upper to an 802.1ad bridge is not supported");
-				return -EOPNOTSUPP;
-			}
-		}
-		if (netif_is_bridge_port(lower_dev) && is_vlan_dev(upper_dev)) {
-			struct net_device *br_dev = netdev_master_upper_dev_get(lower_dev);
-
-			if (br_vlan_enabled(br_dev)) {
-				br_vlan_get_proto(br_dev, &proto);
-				if (proto == ETH_P_8021AD) {
-					NL_SET_ERR_MSG_MOD(extack, "VLAN uppers are not supported on a port enslaved to an 802.1ad bridge");
-					return -EOPNOTSUPP;
-				}
-			}
-		}
-		if (is_vlan_dev(upper_dev) &&
-		    ntohs(vlan_dev_vlan_proto(upper_dev)) != ETH_P_8021Q) {
-			NL_SET_ERR_MSG_MOD(extack, "VLAN uppers are only supported with 802.1q VLAN protocol");
-			return -EOPNOTSUPP;
-		}
+
+		err = mlxsw_sp_prechangeupper_sanity_checks(mlxsw_sp,
+							    dev, lower_dev,
+							    upper_dev,
+							    info,
+							    extack);
+		if (err)
+			return err;
+
 		break;
 	case NETDEV_CHANGEUPPER:
 		upper_dev = info->upper_dev;
@@ -4260,6 +4302,46 @@ static int mlxsw_sp_netdevice_lag_event(struct net_device *lag_dev,
 	return 0;
 }
 
+static int
+mlxsw_sp_vlan_prechangeupper_sanity_checks(struct mlxsw_sp *mlxsw_sp,
+					   struct net_device *vlan_dev,
+					   struct net_device *upper_dev,
+					   struct netdev_notifier_changeupper_info *info,
+					   struct netlink_ext_ack *extack)
+{
+	if (!netif_is_bridge_master(upper_dev) &&
+	    !netif_is_macvlan(upper_dev)) {
+		NL_SET_ERR_MSG_MOD(extack, "Unknown upper device type");
+		return -EINVAL;
+	}
+
+	if (!info->linking)
+		return 0;
+
+	if (netif_is_bridge_master(upper_dev) &&
+	    !mlxsw_sp_bridge_device_is_offloaded(mlxsw_sp, upper_dev) &&
+	    mlxsw_sp_bridge_has_vxlan(upper_dev) &&
+	    !mlxsw_sp_bridge_vxlan_is_valid(upper_dev, extack))
+		return -EOPNOTSUPP;
+
+	if (netdev_has_any_upper_dev(upper_dev) &&
+	    (!netif_is_bridge_master(upper_dev) ||
+	     !mlxsw_sp_bridge_device_is_offloaded(mlxsw_sp,
+						  upper_dev))) {
+		NL_SET_ERR_MSG_MOD(extack,
+				   "Enslaving a port to a device that already has an upper device is not supported");
+		return -EINVAL;
+	}
+
+	if (netif_is_macvlan(upper_dev) &&
+	    !mlxsw_sp_rif_exists(mlxsw_sp, vlan_dev)) {
+		NL_SET_ERR_MSG_MOD(extack, "macvlan is only supported on top of router interfaces");
+		return -EOPNOTSUPP;
+	}
+
+	return 0;
+}
+
 static int mlxsw_sp_netdevice_port_vlan_event(struct net_device *vlan_dev,
 					      struct net_device *dev,
 					      unsigned long event, void *ptr,
@@ -4277,30 +4359,14 @@ static int mlxsw_sp_netdevice_port_vlan_event(struct net_device *vlan_dev,
 	switch (event) {
 	case NETDEV_PRECHANGEUPPER:
 		upper_dev = info->upper_dev;
-		if (!netif_is_bridge_master(upper_dev) &&
-		    !netif_is_macvlan(upper_dev)) {
-			NL_SET_ERR_MSG_MOD(extack, "Unknown upper device type");
-			return -EINVAL;
-		}
-		if (!info->linking)
-			break;
-		if (netif_is_bridge_master(upper_dev) &&
-		    !mlxsw_sp_bridge_device_is_offloaded(mlxsw_sp, upper_dev) &&
-		    mlxsw_sp_bridge_has_vxlan(upper_dev) &&
-		    !mlxsw_sp_bridge_vxlan_is_valid(upper_dev, extack))
-			return -EOPNOTSUPP;
-		if (netdev_has_any_upper_dev(upper_dev) &&
-		    (!netif_is_bridge_master(upper_dev) ||
-		     !mlxsw_sp_bridge_device_is_offloaded(mlxsw_sp,
-							  upper_dev))) {
-			NL_SET_ERR_MSG_MOD(extack, "Enslaving a port to a device that already has an upper device is not supported");
-			return -EINVAL;
-		}
-		if (netif_is_macvlan(upper_dev) &&
-		    !mlxsw_sp_rif_exists(mlxsw_sp, vlan_dev)) {
-			NL_SET_ERR_MSG_MOD(extack, "macvlan is only supported on top of router interfaces");
-			return -EOPNOTSUPP;
-		}
+
+		err = mlxsw_sp_vlan_prechangeupper_sanity_checks(mlxsw_sp,
+								 vlan_dev,
+								 upper_dev,
+								 info, extack);
+		if (err)
+			return err;
+
 		break;
 	case NETDEV_CHANGEUPPER:
 		upper_dev = info->upper_dev;
-- 
2.25.1


  parent reply	other threads:[~2021-07-18 21:46 UTC|newest]

Thread overview: 37+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-07-18 21:44 [PATCH v4 net-next 00/15] Allow forwarding for the software bridge data path to be offloaded to capable devices Vladimir Oltean
2021-07-18 21:44 ` [PATCH v4 net-next 01/15] net: dpaa2-switch: use extack in dpaa2_switch_port_bridge_join Vladimir Oltean
2021-07-19  9:17   ` Ioana Ciornei
2021-07-18 21:44 ` [PATCH v4 net-next 02/15] net: dpaa2-switch: refactor prechangeupper sanity checks Vladimir Oltean
2021-07-19  9:18   ` Ioana Ciornei
2021-07-18 21:44 ` Vladimir Oltean [this message]
2021-07-18 21:44 ` [PATCH v4 net-next 04/15] mlxsw: spectrum: refactor leaving an 8021q upper that is a bridge port Vladimir Oltean
2021-07-19  2:16   ` Florian Fainelli
2021-07-18 21:44 ` [PATCH v4 net-next 05/15] net: marvell: prestera: refactor prechangeupper sanity checks Vladimir Oltean
2021-07-19  2:20   ` Florian Fainelli
2021-07-18 21:44 ` [PATCH v4 net-next 06/15] net: switchdev: guard drivers against multiple obj replays on same bridge port Vladimir Oltean
2021-07-19  2:17   ` Florian Fainelli
2021-07-18 21:44 ` [PATCH v4 net-next 07/15] net: bridge: disambiguate offload_fwd_mark Vladimir Oltean
2021-07-19  2:26   ` Florian Fainelli
2021-07-18 21:44 ` [PATCH v4 net-next 08/15] net: bridge: switchdev: recycle unused hwdoms Vladimir Oltean
2021-07-18 21:44 ` [PATCH v4 net-next 09/15] net: bridge: switchdev: let drivers inform which bridge ports are offloaded Vladimir Oltean
2021-07-19  9:23   ` Ioana Ciornei
2021-07-20  7:53   ` Horatiu Vultur
2021-07-20  8:45     ` Vladimir Oltean
2021-07-18 21:44 ` [PATCH v4 net-next 10/15] net: bridge: switchdev object replay helpers for everybody Vladimir Oltean
2021-07-19  8:19   ` Vladimir Oltean
2021-07-19  9:26   ` Ioana Ciornei
2021-07-18 21:44 ` [PATCH v4 net-next 11/15] net: bridge: switchdev: allow the TX data plane forwarding to be offloaded Vladimir Oltean
2021-07-19  2:43   ` Florian Fainelli
2021-07-19  7:22   ` Vladimir Oltean
2021-07-18 21:44 ` [PATCH v4 net-next 12/15] net: dsa: track the number of switches in a tree Vladimir Oltean
2021-07-19  2:54   ` Florian Fainelli
2021-07-18 21:44 ` [PATCH v4 net-next 13/15] net: dsa: add support for bridge TX forwarding offload Vladimir Oltean
2021-07-19  2:51   ` Florian Fainelli
2021-07-18 21:44 ` [PATCH v4 net-next 14/15] net: dsa: mv88e6xxx: map virtual bridges with forwarding offload in the PVT Vladimir Oltean
2021-07-19  2:52   ` Florian Fainelli
2021-07-18 21:44 ` [PATCH v4 net-next 15/15] net: dsa: tag_dsa: offload the bridge forwarding process Vladimir Oltean
2021-07-19  2:47   ` Florian Fainelli
2021-07-19  7:41     ` Vladimir Oltean
2021-07-20 11:24 ` [PATCH v4 net-next 00/15] Allow forwarding for the software bridge data path to be offloaded to capable devices Ido Schimmel
2021-07-20 13:20   ` Vladimir Oltean
2021-07-20 13:51     ` Ido Schimmel

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210718214434.3938850-4-vladimir.oltean@nxp.com \
    --to=vladimir.oltean@nxp.com \
    --cc=andrew@lunn.ch \
    --cc=bridge@lists.linux-foundation.org \
    --cc=davem@davemloft.net \
    --cc=dqfext@gmail.com \
    --cc=f.fainelli@gmail.com \
    --cc=grygorii.strashko@ti.com \
    --cc=idosch@idosch.org \
    --cc=jiri@resnulli.us \
    --cc=kabel@blackhole.sk \
    --cc=kuba@kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=nikolay@nvidia.com \
    --cc=roopa@nvidia.com \
    --cc=stephen@networkplumber.org \
    --cc=tobias@waldekranz.com \
    --cc=vivien.didelot@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).