[PATCH net v2 2/2] net: stmmac: skip only stmmac_ptp_register when resume from suspend

[Mohammad Athari Bin Ismail <mohammad.athari.ismail@intel.com>]

When resume from suspend, besides skipping PTP registration, it also
skipping PTP HW initialization. This could cause PTP clock not able to
operate properly when resume from suspend.

To fix this, only stmmac_ptp_register() is skipped when resume from
suspend.

Fixes: fe1319291150 ("stmmac: Don't init ptp again when resume from suspend/hibernation")
Cc: <stable@vger.kernel.org> # 5.15.x
Signed-off-by: Mohammad Athari Bin Ismail <mohammad.athari.ismail@intel.com>
---
v2 changelog:
- Fix build warning related to "function parameter or member not described".
---
 .../net/ethernet/stmicro/stmmac/stmmac_main.c | 22 +++++++++----------
 1 file changed, 11 insertions(+), 11 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index d7e261768f73..b8e5e19e6f7b 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -880,11 +880,12 @@ EXPORT_SYMBOL_GPL(stmmac_init_tstamp_counter);
 /**
  * stmmac_init_ptp - init PTP
  * @priv: driver private structure
+ * @ptp_register: register PTP if set
  * Description: this is to verify if the HW supports the PTPv1 or PTPv2.
  * This is done by looking at the HW cap. register.
  * This function also registers the ptp driver.
  */
-static int stmmac_init_ptp(struct stmmac_priv *priv)
+static int stmmac_init_ptp(struct stmmac_priv *priv, bool ptp_register)
 {
 	bool xmac = priv->plat->has_gmac4 || priv->plat->has_xgmac;
 	int ret;
@@ -914,7 +915,8 @@ static int stmmac_init_ptp(struct stmmac_priv *priv)
 	priv->hwts_tx_en = 0;
 	priv->hwts_rx_en = 0;
 
-	stmmac_ptp_register(priv);
+	if (ptp_register)
+		stmmac_ptp_register(priv);
 
 	return 0;
 }
@@ -3241,7 +3243,7 @@ static int stmmac_fpe_start_wq(struct stmmac_priv *priv)
 /**
  * stmmac_hw_setup - setup mac in a usable state.
  *  @dev : pointer to the device structure.
- *  @init_ptp: initialize PTP if set
+ *  @ptp_register: register PTP if set
  *  Description:
  *  this is the main function to setup the HW in a usable state because the
  *  dma engine is reset, the core registers are configured (e.g. AXI,
@@ -3251,7 +3253,7 @@ static int stmmac_fpe_start_wq(struct stmmac_priv *priv)
  *  0 on success and an appropriate (-)ve integer as defined in errno.h
  *  file on failure.
  */
-static int stmmac_hw_setup(struct net_device *dev, bool init_ptp)
+static int stmmac_hw_setup(struct net_device *dev, bool ptp_register)
 {
 	struct stmmac_priv *priv = netdev_priv(dev);
 	u32 rx_cnt = priv->plat->rx_queues_to_use;
@@ -3308,13 +3310,11 @@ static int stmmac_hw_setup(struct net_device *dev, bool init_ptp)
 
 	stmmac_mmc_setup(priv);
 
-	if (init_ptp) {
-		ret = stmmac_init_ptp(priv);
-		if (ret == -EOPNOTSUPP)
-			netdev_warn(priv->dev, "PTP not supported by HW\n");
-		else if (ret)
-			netdev_warn(priv->dev, "PTP init failed\n");
-	}
+	ret = stmmac_init_ptp(priv, ptp_register);
+	if (ret == -EOPNOTSUPP)
+		netdev_warn(priv->dev, "PTP not supported by HW\n");
+	else if (ret)
+		netdev_warn(priv->dev, "PTP init failed\n");
 
 	priv->eee_tw_timer = STMMAC_DEFAULT_TWT_LS;
 
-- 
2.17.1