netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH net-next v4 0/7] add ti dp83td510 support
@ 2022-05-06  4:23 Oleksij Rempel
  2022-05-06  4:23 ` [PATCH net-next v4 1/7] net: phy: genphy_c45_baset1_an_config_aneg: do no set unknown configuration Oleksij Rempel
                   ` (7 more replies)
  0 siblings, 8 replies; 9+ messages in thread
From: Oleksij Rempel @ 2022-05-06  4:23 UTC (permalink / raw)
  To: Andrew Lunn, Heiner Kallweit, David S. Miller, Eric Dumazet,
	Jakub Kicinski, Paolo Abeni
  Cc: Oleksij Rempel, kernel, linux-kernel, netdev

changes v4:
- dp83td510: remove unused variables
- s/base1/baset1
- s/genphy_c45_baset1_read_master_slave/genphy_c45_pma_baset1_read_master_slave

changes v3:
- export reusable code snippets and make use of it in the dp83td510
  driver

changes v2:
- rewrite the driver reduce usage of common code and to reduce amount of
  quirks.
- add genphy_c45_baset1_an_config_aneg fix

Oleksij Rempel (7):
  net: phy: genphy_c45_baset1_an_config_aneg: do no set unknown
    configuration
  net: phy: introduce genphy_c45_pma_baset1_setup_master_slave()
  net: phy: genphy_c45_pma_baset1_setup_master_slave: do no set unknown
    configuration
  net: phy: introduce genphy_c45_pma_baset1_read_master_slave()
  net: phy: genphy_c45_pma_baset1_read_master_slave: read actual
    configuration
  net: phy: export genphy_c45_baset1_read_status()
  net: phy: dp83td510: Add support for the DP83TD510 Ethernet PHY

 drivers/net/phy/Kconfig     |   6 ++
 drivers/net/phy/Makefile    |   1 +
 drivers/net/phy/dp83td510.c | 209 ++++++++++++++++++++++++++++++++++++
 drivers/net/phy/phy-c45.c   |  94 +++++++++++-----
 include/linux/phy.h         |   3 +
 5 files changed, 286 insertions(+), 27 deletions(-)
 create mode 100644 drivers/net/phy/dp83td510.c

-- 
2.30.2


^ permalink raw reply	[flat|nested] 9+ messages in thread

* [PATCH net-next v4 1/7] net: phy: genphy_c45_baset1_an_config_aneg: do no set unknown configuration
  2022-05-06  4:23 [PATCH net-next v4 0/7] add ti dp83td510 support Oleksij Rempel
@ 2022-05-06  4:23 ` Oleksij Rempel
  2022-05-06  4:23 ` [PATCH net-next v4 2/7] net: phy: introduce genphy_c45_pma_baset1_setup_master_slave() Oleksij Rempel
                   ` (6 subsequent siblings)
  7 siblings, 0 replies; 9+ messages in thread
From: Oleksij Rempel @ 2022-05-06  4:23 UTC (permalink / raw)
  To: Andrew Lunn, Heiner Kallweit, David S. Miller, Eric Dumazet,
	Jakub Kicinski, Paolo Abeni
  Cc: Oleksij Rempel, kernel, linux-kernel, netdev

Do not change default master/slave autoneg configuration if no
changes was requested.

Fixes: 3da8ffd8545f ("net: phy: Add 10BASE-T1L support in phy-c45")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
---
 drivers/net/phy/phy-c45.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/net/phy/phy-c45.c b/drivers/net/phy/phy-c45.c
index eefdd67d5556..0014aa6e73c0 100644
--- a/drivers/net/phy/phy-c45.c
+++ b/drivers/net/phy/phy-c45.c
@@ -191,8 +191,12 @@ static int genphy_c45_baset1_an_config_aneg(struct phy_device *phydev)
 	case MASTER_SLAVE_CFG_MASTER_PREFERRED:
 	case MASTER_SLAVE_CFG_SLAVE_PREFERRED:
 		break;
+	case MASTER_SLAVE_CFG_UNKNOWN:
+	case MASTER_SLAVE_CFG_UNSUPPORTED:
+		return 0;
 	default:
-		break;
+		phydev_warn(phydev, "Unsupported Master/Slave mode\n");
+		return -EOPNOTSUPP;
 	}
 
 	switch (phydev->master_slave_set) {
-- 
2.30.2


^ permalink raw reply related	[flat|nested] 9+ messages in thread

* [PATCH net-next v4 2/7] net: phy: introduce genphy_c45_pma_baset1_setup_master_slave()
  2022-05-06  4:23 [PATCH net-next v4 0/7] add ti dp83td510 support Oleksij Rempel
  2022-05-06  4:23 ` [PATCH net-next v4 1/7] net: phy: genphy_c45_baset1_an_config_aneg: do no set unknown configuration Oleksij Rempel
@ 2022-05-06  4:23 ` Oleksij Rempel
  2022-05-06  4:23 ` [PATCH net-next v4 3/7] net: phy: genphy_c45_pma_baset1_setup_master_slave: do no set unknown configuration Oleksij Rempel
                   ` (5 subsequent siblings)
  7 siblings, 0 replies; 9+ messages in thread
From: Oleksij Rempel @ 2022-05-06  4:23 UTC (permalink / raw)
  To: Andrew Lunn, Heiner Kallweit, David S. Miller, Eric Dumazet,
	Jakub Kicinski, Paolo Abeni
  Cc: Oleksij Rempel, kernel, linux-kernel, netdev

Move baset1 specific part of genphy_c45_pma_setup_forced() code to
separate function to make it reusable by PHY drivers.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
---
 drivers/net/phy/phy-c45.c | 49 ++++++++++++++++++++++++---------------
 include/linux/phy.h       |  1 +
 2 files changed, 31 insertions(+), 19 deletions(-)

diff --git a/drivers/net/phy/phy-c45.c b/drivers/net/phy/phy-c45.c
index 0014aa6e73c0..ffa2d5cd09fc 100644
--- a/drivers/net/phy/phy-c45.c
+++ b/drivers/net/phy/phy-c45.c
@@ -70,6 +70,35 @@ int genphy_c45_pma_suspend(struct phy_device *phydev)
 }
 EXPORT_SYMBOL_GPL(genphy_c45_pma_suspend);
 
+/**
+ * genphy_c45_pma_baset1_setup_master_slave - configures forced master/slave
+ * role of BaseT1 devices.
+ * @phydev: target phy_device struct
+ */
+int genphy_c45_pma_baset1_setup_master_slave(struct phy_device *phydev)
+{
+	int ctl = 0;
+
+	switch (phydev->master_slave_set) {
+	case MASTER_SLAVE_CFG_MASTER_PREFERRED:
+	case MASTER_SLAVE_CFG_MASTER_FORCE:
+		ctl = MDIO_PMA_PMD_BT1_CTRL_CFG_MST;
+		break;
+	case MASTER_SLAVE_CFG_SLAVE_FORCE:
+	case MASTER_SLAVE_CFG_SLAVE_PREFERRED:
+	case MASTER_SLAVE_CFG_UNKNOWN:
+	case MASTER_SLAVE_CFG_UNSUPPORTED:
+		break;
+	default:
+		phydev_warn(phydev, "Unsupported Master/Slave mode\n");
+		return -EOPNOTSUPP;
+	}
+
+	return phy_modify_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_PMA_PMD_BT1_CTRL,
+			     MDIO_PMA_PMD_BT1_CTRL_CFG_MST, ctl);
+}
+EXPORT_SYMBOL_GPL(genphy_c45_pma_baset1_setup_master_slave);
+
 /**
  * genphy_c45_pma_setup_forced - configures a forced speed
  * @phydev: target phy_device struct
@@ -141,25 +170,7 @@ int genphy_c45_pma_setup_forced(struct phy_device *phydev)
 		return ret;
 
 	if (genphy_c45_baset1_able(phydev)) {
-		int ctl = 0;
-
-		switch (phydev->master_slave_set) {
-		case MASTER_SLAVE_CFG_MASTER_PREFERRED:
-		case MASTER_SLAVE_CFG_MASTER_FORCE:
-			ctl = MDIO_PMA_PMD_BT1_CTRL_CFG_MST;
-			break;
-		case MASTER_SLAVE_CFG_SLAVE_FORCE:
-		case MASTER_SLAVE_CFG_SLAVE_PREFERRED:
-		case MASTER_SLAVE_CFG_UNKNOWN:
-		case MASTER_SLAVE_CFG_UNSUPPORTED:
-			break;
-		default:
-			phydev_warn(phydev, "Unsupported Master/Slave mode\n");
-			return -EOPNOTSUPP;
-		}
-
-		ret = phy_modify_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_PMA_PMD_BT1_CTRL,
-				     MDIO_PMA_PMD_BT1_CTRL_CFG_MST, ctl);
+		ret = genphy_c45_pma_baset1_setup_master_slave(phydev);
 		if (ret < 0)
 			return ret;
 	}
diff --git a/include/linux/phy.h b/include/linux/phy.h
index 2d12054932ba..d3f924d3b235 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -1614,6 +1614,7 @@ int genphy_c45_read_link(struct phy_device *phydev);
 int genphy_c45_read_lpa(struct phy_device *phydev);
 int genphy_c45_read_pma(struct phy_device *phydev);
 int genphy_c45_pma_setup_forced(struct phy_device *phydev);
+int genphy_c45_pma_baset1_setup_master_slave(struct phy_device *phydev);
 int genphy_c45_an_config_aneg(struct phy_device *phydev);
 int genphy_c45_an_disable_aneg(struct phy_device *phydev);
 int genphy_c45_read_mdix(struct phy_device *phydev);
-- 
2.30.2


^ permalink raw reply related	[flat|nested] 9+ messages in thread

* [PATCH net-next v4 3/7] net: phy: genphy_c45_pma_baset1_setup_master_slave: do no set unknown configuration
  2022-05-06  4:23 [PATCH net-next v4 0/7] add ti dp83td510 support Oleksij Rempel
  2022-05-06  4:23 ` [PATCH net-next v4 1/7] net: phy: genphy_c45_baset1_an_config_aneg: do no set unknown configuration Oleksij Rempel
  2022-05-06  4:23 ` [PATCH net-next v4 2/7] net: phy: introduce genphy_c45_pma_baset1_setup_master_slave() Oleksij Rempel
@ 2022-05-06  4:23 ` Oleksij Rempel
  2022-05-06  4:23 ` [PATCH net-next v4 4/7] net: phy: introduce genphy_c45_pma_baset1_read_master_slave() Oleksij Rempel
                   ` (4 subsequent siblings)
  7 siblings, 0 replies; 9+ messages in thread
From: Oleksij Rempel @ 2022-05-06  4:23 UTC (permalink / raw)
  To: Andrew Lunn, Heiner Kallweit, David S. Miller, Eric Dumazet,
	Jakub Kicinski, Paolo Abeni
  Cc: Oleksij Rempel, kernel, linux-kernel, netdev

Do not change default master/slave forced configuration if no changes was
requested.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
---
 drivers/net/phy/phy-c45.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/phy/phy-c45.c b/drivers/net/phy/phy-c45.c
index ffa2d5cd09fc..b1f7c63f66cd 100644
--- a/drivers/net/phy/phy-c45.c
+++ b/drivers/net/phy/phy-c45.c
@@ -86,9 +86,10 @@ int genphy_c45_pma_baset1_setup_master_slave(struct phy_device *phydev)
 		break;
 	case MASTER_SLAVE_CFG_SLAVE_FORCE:
 	case MASTER_SLAVE_CFG_SLAVE_PREFERRED:
+		break;
 	case MASTER_SLAVE_CFG_UNKNOWN:
 	case MASTER_SLAVE_CFG_UNSUPPORTED:
-		break;
+		return 0;
 	default:
 		phydev_warn(phydev, "Unsupported Master/Slave mode\n");
 		return -EOPNOTSUPP;
-- 
2.30.2


^ permalink raw reply related	[flat|nested] 9+ messages in thread

* [PATCH net-next v4 4/7] net: phy: introduce genphy_c45_pma_baset1_read_master_slave()
  2022-05-06  4:23 [PATCH net-next v4 0/7] add ti dp83td510 support Oleksij Rempel
                   ` (2 preceding siblings ...)
  2022-05-06  4:23 ` [PATCH net-next v4 3/7] net: phy: genphy_c45_pma_baset1_setup_master_slave: do no set unknown configuration Oleksij Rempel
@ 2022-05-06  4:23 ` Oleksij Rempel
  2022-05-06  4:23 ` [PATCH net-next v4 5/7] net: phy: genphy_c45_pma_baset1_read_master_slave: read actual configuration Oleksij Rempel
                   ` (3 subsequent siblings)
  7 siblings, 0 replies; 9+ messages in thread
From: Oleksij Rempel @ 2022-05-06  4:23 UTC (permalink / raw)
  To: Andrew Lunn, Heiner Kallweit, David S. Miller, Eric Dumazet,
	Jakub Kicinski, Paolo Abeni
  Cc: Oleksij Rempel, kernel, linux-kernel, netdev

Move baset1 specific part of genphy_c45_read_pma() code to
separate function to make it reusable by PHY drivers.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
---
 drivers/net/phy/phy-c45.c | 31 +++++++++++++++++++++++++------
 include/linux/phy.h       |  1 +
 2 files changed, 26 insertions(+), 6 deletions(-)

diff --git a/drivers/net/phy/phy-c45.c b/drivers/net/phy/phy-c45.c
index b1f7c63f66cd..d440b76a18b4 100644
--- a/drivers/net/phy/phy-c45.c
+++ b/drivers/net/phy/phy-c45.c
@@ -550,6 +550,30 @@ int genphy_c45_read_lpa(struct phy_device *phydev)
 }
 EXPORT_SYMBOL_GPL(genphy_c45_read_lpa);
 
+/**
+ * genphy_c45_pma_baset1_read_master_slave - read forced master/slave
+ * configuration
+ * @phydev: target phy_device struct
+ */
+int genphy_c45_pma_baset1_read_master_slave(struct phy_device *phydev)
+{
+	int val;
+
+	phydev->master_slave_state = MASTER_SLAVE_STATE_UNKNOWN;
+
+	val = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_PMA_PMD_BT1_CTRL);
+	if (val < 0)
+		return val;
+
+	if (val & MDIO_PMA_PMD_BT1_CTRL_CFG_MST)
+		phydev->master_slave_state = MASTER_SLAVE_STATE_MASTER;
+	else
+		phydev->master_slave_state = MASTER_SLAVE_STATE_SLAVE;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(genphy_c45_pma_baset1_read_master_slave);
+
 /**
  * genphy_c45_read_pma - read link speed etc from PMA
  * @phydev: target phy_device struct
@@ -591,14 +615,9 @@ int genphy_c45_read_pma(struct phy_device *phydev)
 	phydev->duplex = DUPLEX_FULL;
 
 	if (genphy_c45_baset1_able(phydev)) {
-		val = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_PMA_PMD_BT1_CTRL);
+		val = genphy_c45_pma_baset1_read_master_slave(phydev);
 		if (val < 0)
 			return val;
-
-		if (MDIO_PMA_PMD_BT1_CTRL_CFG_MST)
-			phydev->master_slave_state = MASTER_SLAVE_STATE_MASTER;
-		else
-			phydev->master_slave_state = MASTER_SLAVE_STATE_SLAVE;
 	}
 
 	return 0;
diff --git a/include/linux/phy.h b/include/linux/phy.h
index d3f924d3b235..4713c95d65fb 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -1619,6 +1619,7 @@ int genphy_c45_an_config_aneg(struct phy_device *phydev);
 int genphy_c45_an_disable_aneg(struct phy_device *phydev);
 int genphy_c45_read_mdix(struct phy_device *phydev);
 int genphy_c45_pma_read_abilities(struct phy_device *phydev);
+int genphy_c45_pma_baset1_read_master_slave(struct phy_device *phydev);
 int genphy_c45_read_status(struct phy_device *phydev);
 int genphy_c45_config_aneg(struct phy_device *phydev);
 int genphy_c45_loopback(struct phy_device *phydev, bool enable);
-- 
2.30.2


^ permalink raw reply related	[flat|nested] 9+ messages in thread

* [PATCH net-next v4 5/7] net: phy: genphy_c45_pma_baset1_read_master_slave: read actual configuration
  2022-05-06  4:23 [PATCH net-next v4 0/7] add ti dp83td510 support Oleksij Rempel
                   ` (3 preceding siblings ...)
  2022-05-06  4:23 ` [PATCH net-next v4 4/7] net: phy: introduce genphy_c45_pma_baset1_read_master_slave() Oleksij Rempel
@ 2022-05-06  4:23 ` Oleksij Rempel
  2022-05-06  4:23 ` [PATCH net-next v4 6/7] net: phy: export genphy_c45_baset1_read_status() Oleksij Rempel
                   ` (2 subsequent siblings)
  7 siblings, 0 replies; 9+ messages in thread
From: Oleksij Rempel @ 2022-05-06  4:23 UTC (permalink / raw)
  To: Andrew Lunn, Heiner Kallweit, David S. Miller, Eric Dumazet,
	Jakub Kicinski, Paolo Abeni
  Cc: Oleksij Rempel, kernel, linux-kernel, netdev

Since MDIO_PMA_PMD_BT1_CTRL register shows actual configuration (and
forced state configuration is equal to the state), we should show
this configuration for ethtool.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
---
 drivers/net/phy/phy-c45.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/net/phy/phy-c45.c b/drivers/net/phy/phy-c45.c
index d440b76a18b4..a0684c716a2e 100644
--- a/drivers/net/phy/phy-c45.c
+++ b/drivers/net/phy/phy-c45.c
@@ -560,15 +560,19 @@ int genphy_c45_pma_baset1_read_master_slave(struct phy_device *phydev)
 	int val;
 
 	phydev->master_slave_state = MASTER_SLAVE_STATE_UNKNOWN;
+	phydev->master_slave_get = MASTER_SLAVE_CFG_UNKNOWN;
 
 	val = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_PMA_PMD_BT1_CTRL);
 	if (val < 0)
 		return val;
 
-	if (val & MDIO_PMA_PMD_BT1_CTRL_CFG_MST)
+	if (val & MDIO_PMA_PMD_BT1_CTRL_CFG_MST) {
+		phydev->master_slave_get = MASTER_SLAVE_CFG_MASTER_FORCE;
 		phydev->master_slave_state = MASTER_SLAVE_STATE_MASTER;
-	else
+	} else {
+		phydev->master_slave_get = MASTER_SLAVE_CFG_SLAVE_FORCE;
 		phydev->master_slave_state = MASTER_SLAVE_STATE_SLAVE;
+	}
 
 	return 0;
 }
-- 
2.30.2


^ permalink raw reply related	[flat|nested] 9+ messages in thread

* [PATCH net-next v4 6/7] net: phy: export genphy_c45_baset1_read_status()
  2022-05-06  4:23 [PATCH net-next v4 0/7] add ti dp83td510 support Oleksij Rempel
                   ` (4 preceding siblings ...)
  2022-05-06  4:23 ` [PATCH net-next v4 5/7] net: phy: genphy_c45_pma_baset1_read_master_slave: read actual configuration Oleksij Rempel
@ 2022-05-06  4:23 ` Oleksij Rempel
  2022-05-06  4:23 ` [PATCH net-next v4 7/7] net: phy: dp83td510: Add support for the DP83TD510 Ethernet PHY Oleksij Rempel
  2022-05-09 11:20 ` [PATCH net-next v4 0/7] add ti dp83td510 support patchwork-bot+netdevbpf
  7 siblings, 0 replies; 9+ messages in thread
From: Oleksij Rempel @ 2022-05-06  4:23 UTC (permalink / raw)
  To: Andrew Lunn, Heiner Kallweit, David S. Miller, Eric Dumazet,
	Jakub Kicinski, Paolo Abeni
  Cc: Oleksij Rempel, kernel, linux-kernel, netdev

Export genphy_c45_baset1_read_status() to make it reusable by PHY drivers.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
---
 drivers/net/phy/phy-c45.c | 3 ++-
 include/linux/phy.h       | 1 +
 2 files changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/net/phy/phy-c45.c b/drivers/net/phy/phy-c45.c
index a0684c716a2e..29b1df03f3e8 100644
--- a/drivers/net/phy/phy-c45.c
+++ b/drivers/net/phy/phy-c45.c
@@ -785,7 +785,7 @@ EXPORT_SYMBOL_GPL(genphy_c45_pma_read_abilities);
  * is forced or not, it is read from BASE-T1 AN advertisement
  * register 7.514.
  */
-static int genphy_c45_baset1_read_status(struct phy_device *phydev)
+int genphy_c45_baset1_read_status(struct phy_device *phydev)
 {
 	int ret;
 	int cfg;
@@ -815,6 +815,7 @@ static int genphy_c45_baset1_read_status(struct phy_device *phydev)
 
 	return 0;
 }
+EXPORT_SYMBOL_GPL(genphy_c45_baset1_read_status);
 
 /**
  * genphy_c45_read_status - read PHY status
diff --git a/include/linux/phy.h b/include/linux/phy.h
index 4713c95d65fb..508f1149665b 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -1621,6 +1621,7 @@ int genphy_c45_read_mdix(struct phy_device *phydev);
 int genphy_c45_pma_read_abilities(struct phy_device *phydev);
 int genphy_c45_pma_baset1_read_master_slave(struct phy_device *phydev);
 int genphy_c45_read_status(struct phy_device *phydev);
+int genphy_c45_baset1_read_status(struct phy_device *phydev);
 int genphy_c45_config_aneg(struct phy_device *phydev);
 int genphy_c45_loopback(struct phy_device *phydev, bool enable);
 int genphy_c45_pma_resume(struct phy_device *phydev);
-- 
2.30.2


^ permalink raw reply related	[flat|nested] 9+ messages in thread

* [PATCH net-next v4 7/7] net: phy: dp83td510: Add support for the DP83TD510 Ethernet PHY
  2022-05-06  4:23 [PATCH net-next v4 0/7] add ti dp83td510 support Oleksij Rempel
                   ` (5 preceding siblings ...)
  2022-05-06  4:23 ` [PATCH net-next v4 6/7] net: phy: export genphy_c45_baset1_read_status() Oleksij Rempel
@ 2022-05-06  4:23 ` Oleksij Rempel
  2022-05-09 11:20 ` [PATCH net-next v4 0/7] add ti dp83td510 support patchwork-bot+netdevbpf
  7 siblings, 0 replies; 9+ messages in thread
From: Oleksij Rempel @ 2022-05-06  4:23 UTC (permalink / raw)
  To: Andrew Lunn, Heiner Kallweit, David S. Miller, Eric Dumazet,
	Jakub Kicinski, Paolo Abeni
  Cc: Oleksij Rempel, kernel, linux-kernel, netdev

The DP83TD510E is an ultra-low power Ethernet physical layer transceiver
that supports 10M single pair cable.

This driver was tested with NXP SJA1105, STMMAC and ASIX AX88772B USB Ethernet
controller.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
---
 drivers/net/phy/Kconfig     |   6 ++
 drivers/net/phy/Makefile    |   1 +
 drivers/net/phy/dp83td510.c | 209 ++++++++++++++++++++++++++++++++++++
 3 files changed, 216 insertions(+)
 create mode 100644 drivers/net/phy/dp83td510.c

diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
index bbbf6c07ea53..9fee639ee5c8 100644
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -342,6 +342,12 @@ config DP83869_PHY
 	  Currently supports the DP83869 PHY.  This PHY supports copper and
 	  fiber connections.
 
+config DP83TD510_PHY
+	tristate "Texas Instruments DP83TD510 Ethernet 10Base-T1L PHY"
+	help
+	  Support for the DP83TD510 Ethernet 10Base-T1L PHY. This PHY supports
+	  a 10M single pair Ethernet connection for up to 1000 meter cable.
+
 config VITESSE_PHY
 	tristate "Vitesse PHYs"
 	help
diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile
index b82651b57043..b12b1d86fc99 100644
--- a/drivers/net/phy/Makefile
+++ b/drivers/net/phy/Makefile
@@ -57,6 +57,7 @@ obj-$(CONFIG_DP83848_PHY)	+= dp83848.o
 obj-$(CONFIG_DP83867_PHY)	+= dp83867.o
 obj-$(CONFIG_DP83869_PHY)	+= dp83869.o
 obj-$(CONFIG_DP83TC811_PHY)	+= dp83tc811.o
+obj-$(CONFIG_DP83TD510_PHY)	+= dp83td510.o
 obj-$(CONFIG_FIXED_PHY)		+= fixed_phy.o
 obj-$(CONFIG_ICPLUS_PHY)	+= icplus.o
 obj-$(CONFIG_INTEL_XWAY_PHY)	+= intel-xway.o
diff --git a/drivers/net/phy/dp83td510.c b/drivers/net/phy/dp83td510.c
new file mode 100644
index 000000000000..1ae792b0daaa
--- /dev/null
+++ b/drivers/net/phy/dp83td510.c
@@ -0,0 +1,209 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Driver for the Texas Instruments DP83TD510 PHY
+ * Copyright (c) 2022 Pengutronix, Oleksij Rempel <kernel@pengutronix.de>
+ */
+
+#include <linux/bitfield.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/phy.h>
+
+#define DP83TD510E_PHY_ID			0x20000181
+
+/* MDIO_MMD_VEND2 registers */
+#define DP83TD510E_PHY_STS			0x10
+#define DP83TD510E_STS_MII_INT			BIT(7)
+#define DP83TD510E_LINK_STATUS			BIT(0)
+
+#define DP83TD510E_GEN_CFG			0x11
+#define DP83TD510E_GENCFG_INT_POLARITY		BIT(3)
+#define DP83TD510E_GENCFG_INT_EN		BIT(1)
+#define DP83TD510E_GENCFG_INT_OE		BIT(0)
+
+#define DP83TD510E_INTERRUPT_REG_1		0x12
+#define DP83TD510E_INT1_LINK			BIT(13)
+#define DP83TD510E_INT1_LINK_EN			BIT(5)
+
+#define DP83TD510E_AN_STAT_1			0x60c
+#define DP83TD510E_MASTER_SLAVE_RESOL_FAIL	BIT(15)
+
+static int dp83td510_config_intr(struct phy_device *phydev)
+{
+	int ret;
+
+	if (phydev->interrupts == PHY_INTERRUPT_ENABLED) {
+		/* Clear any pending interrupts */
+		ret = phy_write_mmd(phydev, MDIO_MMD_VEND2, DP83TD510E_PHY_STS,
+				    0x0);
+		if (ret)
+			return ret;
+
+		ret = phy_write_mmd(phydev, MDIO_MMD_VEND2,
+				    DP83TD510E_INTERRUPT_REG_1,
+				    DP83TD510E_INT1_LINK_EN);
+		if (ret)
+			return ret;
+
+		ret = phy_set_bits_mmd(phydev, MDIO_MMD_VEND2,
+				       DP83TD510E_GEN_CFG,
+				       DP83TD510E_GENCFG_INT_POLARITY |
+				       DP83TD510E_GENCFG_INT_EN |
+				       DP83TD510E_GENCFG_INT_OE);
+	} else {
+		ret = phy_write_mmd(phydev, MDIO_MMD_VEND2,
+				    DP83TD510E_INTERRUPT_REG_1, 0x0);
+		if (ret)
+			return ret;
+
+		ret = phy_clear_bits_mmd(phydev, MDIO_MMD_VEND2,
+					 DP83TD510E_GEN_CFG,
+					 DP83TD510E_GENCFG_INT_EN);
+		if (ret)
+			return ret;
+
+		/* Clear any pending interrupts */
+		ret = phy_write_mmd(phydev, MDIO_MMD_VEND2, DP83TD510E_PHY_STS,
+				    0x0);
+	}
+
+	return ret;
+}
+
+static irqreturn_t dp83td510_handle_interrupt(struct phy_device *phydev)
+{
+	int  ret;
+
+	ret = phy_read_mmd(phydev, MDIO_MMD_VEND2, DP83TD510E_PHY_STS);
+	if (ret < 0) {
+		phy_error(phydev);
+		return IRQ_NONE;
+	} else if (!(ret & DP83TD510E_STS_MII_INT)) {
+		return IRQ_NONE;
+	}
+
+	/* Read the current enabled interrupts */
+	ret = phy_read_mmd(phydev, MDIO_MMD_VEND2, DP83TD510E_INTERRUPT_REG_1);
+	if (ret < 0) {
+		phy_error(phydev);
+		return IRQ_NONE;
+	} else if (!(ret & DP83TD510E_INT1_LINK_EN) ||
+		   !(ret & DP83TD510E_INT1_LINK)) {
+		return IRQ_NONE;
+	}
+
+	phy_trigger_machine(phydev);
+
+	return IRQ_HANDLED;
+}
+
+static int dp83td510_read_status(struct phy_device *phydev)
+{
+	u16 phy_sts;
+	int ret;
+
+	phydev->speed = SPEED_UNKNOWN;
+	phydev->duplex = DUPLEX_UNKNOWN;
+	phydev->pause = 0;
+	phydev->asym_pause = 0;
+	linkmode_zero(phydev->lp_advertising);
+
+	phy_sts = phy_read(phydev, DP83TD510E_PHY_STS);
+
+	phydev->link = !!(phy_sts & DP83TD510E_LINK_STATUS);
+	if (phydev->link) {
+		/* This PHY supports only one link mode: 10BaseT1L_Full */
+		phydev->duplex = DUPLEX_FULL;
+		phydev->speed = SPEED_10;
+
+		if (phydev->autoneg == AUTONEG_ENABLE) {
+			ret = genphy_c45_read_lpa(phydev);
+			if (ret)
+				return ret;
+
+			phy_resolve_aneg_linkmode(phydev);
+		}
+	}
+
+	if (phydev->autoneg == AUTONEG_ENABLE) {
+		ret = genphy_c45_baset1_read_status(phydev);
+		if (ret < 0)
+			return ret;
+
+		ret = phy_read_mmd(phydev, MDIO_MMD_VEND2,
+				   DP83TD510E_AN_STAT_1);
+		if (ret < 0)
+			return ret;
+
+		if (ret & DP83TD510E_MASTER_SLAVE_RESOL_FAIL)
+			phydev->master_slave_state = MASTER_SLAVE_STATE_ERR;
+	} else {
+		return genphy_c45_pma_baset1_read_master_slave(phydev);
+	}
+
+	return 0;
+}
+
+static int dp83td510_config_aneg(struct phy_device *phydev)
+{
+	bool changed = false;
+	int ret;
+
+	ret = genphy_c45_pma_baset1_setup_master_slave(phydev);
+	if (ret < 0)
+		return ret;
+
+	if (phydev->autoneg == AUTONEG_DISABLE)
+		return genphy_c45_an_disable_aneg(phydev);
+
+	ret = genphy_c45_an_config_aneg(phydev);
+	if (ret < 0)
+		return ret;
+	if (ret > 0)
+		changed = true;
+
+	return genphy_c45_check_and_restart_aneg(phydev, changed);
+}
+
+static int dp83td510_get_features(struct phy_device *phydev)
+{
+	/* This PHY can't respond on MDIO bus if no RMII clock is enabled.
+	 * In case RMII mode is used (most meaningful mode for this PHY) and
+	 * the PHY do not have own XTAL, and CLK providing MAC is not probed,
+	 * we won't be able to read all needed ability registers.
+	 * So provide it manually.
+	 */
+
+	linkmode_set_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, phydev->supported);
+	linkmode_set_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT, phydev->supported);
+	linkmode_set_bit(ETHTOOL_LINK_MODE_Pause_BIT, phydev->supported);
+	linkmode_set_bit(ETHTOOL_LINK_MODE_10baseT1L_Full_BIT,
+			 phydev->supported);
+
+	return 0;
+}
+
+static struct phy_driver dp83td510_driver[] = {
+{
+	PHY_ID_MATCH_MODEL(DP83TD510E_PHY_ID),
+	.name		= "TI DP83TD510E",
+
+	.config_aneg	= dp83td510_config_aneg,
+	.read_status	= dp83td510_read_status,
+	.get_features	= dp83td510_get_features,
+	.config_intr	= dp83td510_config_intr,
+	.handle_interrupt = dp83td510_handle_interrupt,
+
+	.suspend	= genphy_suspend,
+	.resume		= genphy_resume,
+} };
+module_phy_driver(dp83td510_driver);
+
+static struct mdio_device_id __maybe_unused dp83td510_tbl[] = {
+	{ PHY_ID_MATCH_MODEL(DP83TD510E_PHY_ID) },
+	{ }
+};
+MODULE_DEVICE_TABLE(mdio, dp83td510_tbl);
+
+MODULE_DESCRIPTION("Texas Instruments DP83TD510E PHY driver");
+MODULE_AUTHOR("Oleksij Rempel <kernel@pengutronix.de>");
+MODULE_LICENSE("GPL v2");
-- 
2.30.2


^ permalink raw reply related	[flat|nested] 9+ messages in thread

* Re: [PATCH net-next v4 0/7] add ti dp83td510 support
  2022-05-06  4:23 [PATCH net-next v4 0/7] add ti dp83td510 support Oleksij Rempel
                   ` (6 preceding siblings ...)
  2022-05-06  4:23 ` [PATCH net-next v4 7/7] net: phy: dp83td510: Add support for the DP83TD510 Ethernet PHY Oleksij Rempel
@ 2022-05-09 11:20 ` patchwork-bot+netdevbpf
  7 siblings, 0 replies; 9+ messages in thread
From: patchwork-bot+netdevbpf @ 2022-05-09 11:20 UTC (permalink / raw)
  To: Oleksij Rempel
  Cc: andrew, hkallweit1, davem, edumazet, kuba, pabeni, kernel,
	linux-kernel, netdev

Hello:

This series was applied to netdev/net-next.git (master)
by David S. Miller <davem@davemloft.net>:

On Fri,  6 May 2022 06:23:50 +0200 you wrote:
> changes v4:
> - dp83td510: remove unused variables
> - s/base1/baset1
> - s/genphy_c45_baset1_read_master_slave/genphy_c45_pma_baset1_read_master_slave
> 
> changes v3:
> - export reusable code snippets and make use of it in the dp83td510
>   driver
> 
> [...]

Here is the summary with links:
  - [net-next,v4,1/7] net: phy: genphy_c45_baset1_an_config_aneg: do no set unknown configuration
    https://git.kernel.org/netdev/net-next/c/a7f0e4bea8ed
  - [net-next,v4,2/7] net: phy: introduce genphy_c45_pma_baset1_setup_master_slave()
    https://git.kernel.org/netdev/net-next/c/90532850eb21
  - [net-next,v4,3/7] net: phy: genphy_c45_pma_baset1_setup_master_slave: do no set unknown configuration
    https://git.kernel.org/netdev/net-next/c/a04dd88f77a4
  - [net-next,v4,4/7] net: phy: introduce genphy_c45_pma_baset1_read_master_slave()
    https://git.kernel.org/netdev/net-next/c/b9a366f3d874
  - [net-next,v4,5/7] net: phy: genphy_c45_pma_baset1_read_master_slave: read actual configuration
    https://git.kernel.org/netdev/net-next/c/acb8c5aec2b1
  - [net-next,v4,6/7] net: phy: export genphy_c45_baset1_read_status()
    https://git.kernel.org/netdev/net-next/c/2013ad8836ac
  - [net-next,v4,7/7] net: phy: dp83td510: Add support for the DP83TD510 Ethernet PHY
    https://git.kernel.org/netdev/net-next/c/165cd04fe253

You are awesome, thank you!
-- 
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html



^ permalink raw reply	[flat|nested] 9+ messages in thread

end of thread, other threads:[~2022-05-09 11:20 UTC | newest]

Thread overview: 9+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-05-06  4:23 [PATCH net-next v4 0/7] add ti dp83td510 support Oleksij Rempel
2022-05-06  4:23 ` [PATCH net-next v4 1/7] net: phy: genphy_c45_baset1_an_config_aneg: do no set unknown configuration Oleksij Rempel
2022-05-06  4:23 ` [PATCH net-next v4 2/7] net: phy: introduce genphy_c45_pma_baset1_setup_master_slave() Oleksij Rempel
2022-05-06  4:23 ` [PATCH net-next v4 3/7] net: phy: genphy_c45_pma_baset1_setup_master_slave: do no set unknown configuration Oleksij Rempel
2022-05-06  4:23 ` [PATCH net-next v4 4/7] net: phy: introduce genphy_c45_pma_baset1_read_master_slave() Oleksij Rempel
2022-05-06  4:23 ` [PATCH net-next v4 5/7] net: phy: genphy_c45_pma_baset1_read_master_slave: read actual configuration Oleksij Rempel
2022-05-06  4:23 ` [PATCH net-next v4 6/7] net: phy: export genphy_c45_baset1_read_status() Oleksij Rempel
2022-05-06  4:23 ` [PATCH net-next v4 7/7] net: phy: dp83td510: Add support for the DP83TD510 Ethernet PHY Oleksij Rempel
2022-05-09 11:20 ` [PATCH net-next v4 0/7] add ti dp83td510 support patchwork-bot+netdevbpf

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).