netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Corentin Labbe <clabbe@baylibre.com>
To: alexandre.torgue@foss.st.com, andrew@lunn.ch, broonie@kernel.org,
	calvin.johnson@oss.nxp.com, davem@davemloft.net,
	edumazet@google.com, hkallweit1@gmail.com,
	jernej.skrabec@gmail.com, joabreu@synopsys.com,
	krzysztof.kozlowski+dt@linaro.org, kuba@kernel.org,
	lgirdwood@gmail.com, linux@armlinux.org.uk, pabeni@redhat.com,
	peppe.cavallaro@st.com, robh+dt@kernel.org, samuel@sholland.org,
	wens@csie.org
Cc: netdev@vger.kernel.org, devicetree@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, linux-sunxi@lists.linux.dev,
	Corentin Labbe <clabbe@baylibre.com>
Subject: [PATCH 0/6] arm64: add ethernet to orange pi 3
Date: Mon,  9 May 2022 07:48:51 +0000	[thread overview]
Message-ID: <20220509074857.195302-1-clabbe@baylibre.com> (raw)

Hello

2 sunxi board still does not have ethernet working, orangepi 1+ and
orangepi 3.
This is due to the fact thoses boards have a PHY which need 2 regulators.

A first attempt was made to support them was made by adding support in
stmmac driver:
https://lore.kernel.org/lkml/20190820145343.29108-6-megous@megous.com/
Proposal rejected, since regulators need to be handled by the PHY core.

This serie try to handle this.

This serie was tested on whole range of board and PHY architecture:
- internal PHY
  * sun8i-h3-orangepi-pc
- external PHY
  * sun50i-h6-pine-h64
  * sun8i-r40-bananapi-m2-ultra
  * sun8i-a83t-bananapi-m3
  * sun50i-a64-bananapi-m64
  * sun50i-h6-orangepi-3
  * sun50i-h5-nanopi-neo-plus2

The resume/suspend of PHY was tested.

Regards

Corentin Labbe (5):
  phy: handle optional regulator for PHY
  net: stmmac: dwmac-sun8i: remove regulator
  dt-bindings: net: Add documentation for phy-supply
  ARM: dts: sunxi: move phy regulator in PHY node
  arm64: dts: allwinner: move phy regulator in PHY node

Ondřej Jirman (1):
  arm64: dts: allwinner: orange-pi-3: Enable ethernet

 .../devicetree/bindings/net/ethernet-phy.yaml | 10 +++++
 arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts  |  2 +-
 .../boot/dts/sun8i-a83t-cubietruck-plus.dts   |  2 +-
 arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts |  2 +-
 arch/arm/boot/dts/sun8i-h3-nanopi-r1.dts      |  2 +-
 arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts  |  2 +-
 .../arm/boot/dts/sun8i-h3-orangepi-plus2e.dts |  2 +-
 arch/arm/boot/dts/sun8i-h3-zeropi.dts         |  2 +-
 .../boot/dts/sun8i-r40-bananapi-m2-ultra.dts  |  2 +-
 arch/arm/boot/dts/sun8i-r40-oka40i-c.dts      |  2 +-
 .../boot/dts/sun8i-v40-bananapi-m2-berry.dts  |  2 +-
 arch/arm/boot/dts/sun9i-a80-cubieboard4.dts   |  2 +-
 arch/arm/boot/dts/sun9i-a80-optimus.dts       |  2 +-
 arch/arm/boot/dts/sunxi-bananapi-m2-plus.dtsi |  2 +-
 .../dts/allwinner/sun50i-a64-bananapi-m64.dts |  2 +-
 .../dts/allwinner/sun50i-a64-nanopi-a64.dts   |  2 +-
 .../sun50i-a64-oceanic-5205-5inmfd.dts        |  2 +-
 .../dts/allwinner/sun50i-a64-olinuxino.dts    |  2 +-
 .../dts/allwinner/sun50i-a64-orangepi-win.dts |  2 +-
 .../boot/dts/allwinner/sun50i-a64-pine64.dts  |  2 +-
 .../allwinner/sun50i-a64-sopine-baseboard.dts |  2 +-
 .../sun50i-h5-libretech-all-h5-cc.dts         |  2 +-
 .../allwinner/sun50i-h5-nanopi-neo-plus2.dts  |  2 +-
 .../dts/allwinner/sun50i-h5-nanopi-neo2.dts   |  2 +-
 .../dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts |  2 +-
 .../dts/allwinner/sun50i-h5-orangepi-pc2.dts  |  2 +-
 .../allwinner/sun50i-h5-orangepi-prime.dts    |  2 +-
 .../sun50i-h5-orangepi-zero-plus.dts          |  2 +-
 .../dts/allwinner/sun50i-h6-beelink-gs1.dts   |  2 +-
 .../dts/allwinner/sun50i-h6-orangepi-3.dts    | 38 +++++++++++++++++++
 .../allwinner/sun50i-h6-pine-h64-model-b.dts  |  8 ++--
 .../boot/dts/allwinner/sun50i-h6-pine-h64.dts |  2 +-
 .../net/ethernet/stmicro/stmmac/dwmac-sun8i.c | 37 +-----------------
 drivers/net/mdio/fwnode_mdio.c                | 32 ++++++++++++++++
 drivers/net/phy/phy_device.c                  | 20 ++++++++++
 include/linux/phy.h                           |  3 ++
 36 files changed, 138 insertions(+), 68 deletions(-)

-- 
2.35.1


             reply	other threads:[~2022-05-09  8:01 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-05-09  7:48 Corentin Labbe [this message]
2022-05-09  7:48 ` [PATCH 1/6] phy: handle optional regulator for PHY Corentin Labbe
2022-05-09  7:48 ` [PATCH 2/6] net: stmmac: dwmac-sun8i: remove regulator Corentin Labbe
2022-05-09 14:09   ` Andre Przywara
2022-05-09 14:38     ` LABBE Corentin
2022-05-09  7:48 ` [PATCH 3/6] dt-bindings: net: Add documentation for phy-supply Corentin Labbe
2022-05-09 12:17   ` Andrew Lunn
2022-05-09 13:26     ` LABBE Corentin
2022-05-09 16:02       ` Andrew Lunn
2022-05-09 16:12         ` Mark Brown
2022-05-09 16:38           ` Andrew Lunn
2022-05-09 16:56             ` Mark Brown
2022-05-11  8:02               ` LABBE Corentin
2022-05-11 12:50                 ` Mark Brown
2022-05-17  0:47             ` Rob Herring
2022-05-09  7:48 ` [PATCH 4/6] ARM: dts: sunxi: move phy regulator in PHY node Corentin Labbe
2022-05-09 10:55   ` Andre Przywara
2022-05-09 11:16     ` LABBE Corentin
2022-05-09  7:48 ` [PATCH 5/6] arm64: dts: allwinner: " Corentin Labbe
2022-05-09  7:48 ` [PATCH 6/6] arm64: dts: allwinner: orange-pi-3: Enable ethernet Corentin Labbe
2022-05-09 12:20 ` [PATCH 0/6] arm64: add ethernet to orange pi 3 Andrew Lunn
2022-05-09 13:27   ` LABBE Corentin
2022-05-09 15:19     ` Andrew Lunn
2022-05-09 15:24       ` LABBE Corentin
2022-05-09 15:56         ` Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220509074857.195302-1-clabbe@baylibre.com \
    --to=clabbe@baylibre.com \
    --cc=alexandre.torgue@foss.st.com \
    --cc=andrew@lunn.ch \
    --cc=broonie@kernel.org \
    --cc=calvin.johnson@oss.nxp.com \
    --cc=davem@davemloft.net \
    --cc=devicetree@vger.kernel.org \
    --cc=edumazet@google.com \
    --cc=hkallweit1@gmail.com \
    --cc=jernej.skrabec@gmail.com \
    --cc=joabreu@synopsys.com \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=kuba@kernel.org \
    --cc=lgirdwood@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-sunxi@lists.linux.dev \
    --cc=linux@armlinux.org.uk \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    --cc=peppe.cavallaro@st.com \
    --cc=robh+dt@kernel.org \
    --cc=samuel@sholland.org \
    --cc=wens@csie.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).