Re: [PATCH net-next v5 05/13] net: pcs: add Renesas MII converter driver

["Clément Léger" <clement.leger@bootlin.com>]

Le Fri, 20 May 2022 18:58:15 +0300,
Vladimir Oltean <olteanv@gmail.com> a écrit :

> On Fri, May 20, 2022 at 05:49:34PM +0200, Clément Léger wrote:
> > Le Fri, 20 May 2022 18:44:40 +0300,
> > Vladimir Oltean <olteanv@gmail.com> a écrit :
> >   
> > > On Fri, May 20, 2022 at 05:22:44PM +0200, Clément Léger wrote:  
> > > > Le Fri, 20 May 2022 11:49:14 +0300,
> > > > Vladimir Oltean <olteanv@gmail.com> a écrit :
> > > >    
> > > > > On Fri, May 20, 2022 at 09:52:41AM +0200, Clément Léger wrote:    
> > > > > > > Also, as a request to unbind this driver would be disasterous to users,
> > > > > > > I think you should set ".suppress_bind_attrs = true" to prevent the
> > > > > > > sysfs bind/unbind facility being available. This doesn't completely
> > > > > > > solve the problem.    
> > > > > >
> > > > > > Acked. What should I do to make it more robust ? Should I use a
> > > > > > refcount per pdev and check that in the remove() callback to avoid
> > > > > > removing the pdev if used ?    
> > > > >
> > > > > I wonder, if you call device_link_add(ds->dev, miic->dev, DL_FLAG_AUTOREMOVE_CONSUMER),
> > > > > wouldn't that be enough to auto-unbind the DSA driver when the MII
> > > > > converter driver unbinds?    
> > > >
> > > > I looiked at that a bit and I'm not sure how to achieve that cleanly. If
> > > > I need to create this link, then I need to do it once for the dsa switch
> > > > device. However, currently, the way I get the references to the MII
> > > > converter are via the pcs-handle properties which are for each port.
> > > >
> > > > So, I'm not sure creating the link multiple times in miic_create() would
> > > > be ok and also, I'm not sure how to create the link once without adding
> > > > a specific property which points on the MII converter node and use that
> > > > to create the link by adding miic_device_add_link() for instance.
> > > >
> > > > Do you have any preference ?    
> > > 
> > > The simplest (although not the most elegant) way would probably be to
> > > pass the ds->dev as a second argument to miic_create(), and call
> > > device_link_add() multiple times, letting all but the first call fail,
> > > and ignoring the resulting NULL return code. Maybe others have a better idea.  
> > 
> > That's indeed what I started to do although it's nasty to say the
> > least... Moreover, the device_link_del() calls in miic_destroy() would
> > have to be carefully made after all miic ports have been
> > destroyed. Not sure this is going to be cleaner ! I'll try to think
> > about it a bit more.  
> 
> Wait... the whole idea with AUTOREMOVE_CONSUMER is that you _don't_
> remove the device link.. you let it sit there such that the device core
> knows there are other consumers it needs to remove when this driver
> unbinds from the device.

Hum ok, got it, so let's try this solution.

-- 
Clément Léger,
Embedded Linux and Kernel engineer at Bootlin
https://bootlin.com