netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Tony Nguyen <anthony.l.nguyen@intel.com>
To: davem@davemloft.net, kuba@kernel.org, pabeni@redhat.com,
	edumazet@google.com
Cc: Grzegorz Siwik <grzegorz.siwik@intel.com>,
	netdev@vger.kernel.org, anthony.l.nguyen@intel.com,
	Jesse Brandeburg <jesse.brandeburg@intel.com>,
	Jaroslav Pulchart <jaroslav.pulchart@gooddata.com>,
	Igor Raits <igor@gooddata.com>,
	Gurucharan <gurucharanx.g@intel.com>
Subject: [PATCH net 3/5] ice: Fix clearing of promisc mode with bridge over bond
Date: Wed, 17 Aug 2022 10:13:27 -0700	[thread overview]
Message-ID: <20220817171329.65285-4-anthony.l.nguyen@intel.com> (raw)
In-Reply-To: <20220817171329.65285-1-anthony.l.nguyen@intel.com>

From: Grzegorz Siwik <grzegorz.siwik@intel.com>

When at least two interfaces are bonded and a bridge is enabled on the
bond, an error can occur when the bridge is removed and re-added. The
reason for the error is because promiscuous mode was not fully cleared from
the VLAN VSI in the hardware. With this change, promiscuous mode is
properly removed when the bridge disconnects from bonding.

[ 1033.676359] bond1: link status definitely down for interface enp95s0f0, disabling it
[ 1033.676366] bond1: making interface enp175s0f0 the new active one
[ 1033.676369] device enp95s0f0 left promiscuous mode
[ 1033.676522] device enp175s0f0 entered promiscuous mode
[ 1033.676901] ice 0000:af:00.0 enp175s0f0: Error setting Multicast promiscuous mode on VSI 6
[ 1041.795662] ice 0000:af:00.0 enp175s0f0: Error setting Multicast promiscuous mode on VSI 6
[ 1041.944826] bond1: link status definitely down for interface enp175s0f0, disabling it
[ 1041.944874] device enp175s0f0 left promiscuous mode
[ 1041.944918] bond1: now running without any active interface!

Fixes: c31af68a1b94 ("ice: Add outer_vlan_ops and VSI specific VLAN ops implementations")
Co-developed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Grzegorz Siwik <grzegorz.siwik@intel.com>
Link: https://lore.kernel.org/all/CAK8fFZ7m-KR57M_rYX6xZN39K89O=LGooYkKsu6HKt0Bs+x6xQ@mail.gmail.com/
Tested-by: Jaroslav Pulchart <jaroslav.pulchart@gooddata.com>
Tested-by: Igor Raits <igor@gooddata.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
---
 drivers/net/ethernet/intel/ice/ice_lib.c  |  6 +++++-
 drivers/net/ethernet/intel/ice/ice_main.c | 12 +++++++++++-
 2 files changed, 16 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/intel/ice/ice_lib.c b/drivers/net/ethernet/intel/ice/ice_lib.c
index 0d4dbca88964..733c455f6574 100644
--- a/drivers/net/ethernet/intel/ice/ice_lib.c
+++ b/drivers/net/ethernet/intel/ice/ice_lib.c
@@ -4062,7 +4062,11 @@ int ice_vsi_del_vlan_zero(struct ice_vsi *vsi)
 	if (err && err != -EEXIST)
 		return err;
 
-	return 0;
+	/* when deleting the last VLAN filter, make sure to disable the VLAN
+	 * promisc mode so the filter isn't left by accident
+	 */
+	return ice_clear_vsi_promisc(&vsi->back->hw, vsi->idx,
+				    ICE_MCAST_VLAN_PROMISC_BITS, 0);
 }
 
 /**
diff --git a/drivers/net/ethernet/intel/ice/ice_main.c b/drivers/net/ethernet/intel/ice/ice_main.c
index eb40526ee179..4ecaf40cf946 100644
--- a/drivers/net/ethernet/intel/ice/ice_main.c
+++ b/drivers/net/ethernet/intel/ice/ice_main.c
@@ -267,8 +267,10 @@ static int ice_set_promisc(struct ice_vsi *vsi, u8 promisc_m)
 		status = ice_fltr_set_vsi_promisc(&vsi->back->hw, vsi->idx,
 						  promisc_m, 0);
 	}
+	if (status && status != -EEXIST)
+		return status;
 
-	return status;
+	return 0;
 }
 
 /**
@@ -3573,6 +3575,14 @@ ice_vlan_rx_kill_vid(struct net_device *netdev, __be16 proto, u16 vid)
 	while (test_and_set_bit(ICE_CFG_BUSY, vsi->state))
 		usleep_range(1000, 2000);
 
+	ret = ice_clear_vsi_promisc(&vsi->back->hw, vsi->idx,
+				    ICE_MCAST_VLAN_PROMISC_BITS, vid);
+	if (ret) {
+		netdev_err(netdev, "Error clearing multicast promiscuous mode on VSI %i\n",
+			   vsi->vsi_num);
+		vsi->current_netdev_flags |= IFF_ALLMULTI;
+	}
+
 	vlan_ops = ice_get_compat_vsi_vlan_ops(vsi);
 
 	/* Make sure VLAN delete is successful before updating VLAN
-- 
2.35.1


  parent reply	other threads:[~2022-08-17 17:13 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-08-17 17:13 [PATCH net 0/5][pull request] Intel Wired LAN Driver Updates 2022-08-17 (ice) Tony Nguyen
2022-08-17 17:13 ` [PATCH net 1/5] ice: Fix double VLAN error when entering promisc mode Tony Nguyen
2022-08-17 17:13 ` [PATCH net 2/5] ice: Ignore EEXIST when setting " Tony Nguyen
2022-08-17 17:13 ` Tony Nguyen [this message]
2022-08-17 17:13 ` [PATCH net 4/5] ice: Ignore error message when setting same promiscuous mode Tony Nguyen
2022-08-17 17:13 ` [PATCH net 5/5] ice: Fix VF not able to send tagged traffic with no VLAN filters Tony Nguyen
2022-08-18 18:30 ` [PATCH net 0/5][pull request] Intel Wired LAN Driver Updates 2022-08-17 (ice) patchwork-bot+netdevbpf

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220817171329.65285-4-anthony.l.nguyen@intel.com \
    --to=anthony.l.nguyen@intel.com \
    --cc=davem@davemloft.net \
    --cc=edumazet@google.com \
    --cc=grzegorz.siwik@intel.com \
    --cc=gurucharanx.g@intel.com \
    --cc=igor@gooddata.com \
    --cc=jaroslav.pulchart@gooddata.com \
    --cc=jesse.brandeburg@intel.com \
    --cc=kuba@kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).