From: Marc Kleine-Budde <mkl@pengutronix.de>
To: netdev@vger.kernel.org
Cc: davem@davemloft.net, kuba@kernel.org, linux-can@vger.kernel.org,
kernel@pengutronix.de
Subject: [PATCH net-next 0/23] pull-request: can-next 2022-09-15
Date: Thu, 15 Sep 2022 10:19:50 +0200 [thread overview]
Message-ID: <20220915082013.369072-1-mkl@pengutronix.de> (raw)
Hello Jakub, hello David,
this is a pull request of 23 patches for net-next/master.
the first 2 patches are by me and fix a typo in the rx-offload helper
and the flexcan driver.
Christophe JAILLET's patch cleans up the error handling in
rcar_canfd driver's probe function.
Kenneth Lee's patch converts the kvaser_usb driver from kcalloc() to
kzalloc().
Biju Das contributes 2 patches to the sja1000 driver which update the
DT bindings and support for the RZ/N1 SJA1000 CAN controller.
Jinpeng Cui provides 2 patches that remove redundant variables from
the sja1000 and kvaser_pciefd driver.
2 patches by John Whittington and me add hardware timestamp support to
the gs_usb driver.
Gustavo A. R. Silva's patch converts the etas_es58x driver to make use
of DECLARE_FLEX_ARRAY().
Krzysztof Kozlowski's patch cleans up the sja1000 DT bindings.
Dario Binacchi fixes his invalid email in the flexcan driver
documentation.
Ziyang Xuan contributes 2 patches that clean up the CAN RAW protocol.
Yang Yingliang's patch switches the flexcan driver to dev_err_probe().
The last 7 patches are by Oliver Hartkopp and add support for the next
generation of the CAN protocol: CAN with eXtended data Length (CAN XL).
regards,
Marc
---
The following changes since commit 96efd6d01461be234bfc4ca1048a3d5febf0c425:
r8169: remove not needed net_ratelimit() check (2022-09-05 14:49:59 +0100)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next.git tags/linux-can-next-for-6.1-20220915
for you to fetch changes up to c337f103f7781bc8223c650e94492bf08df71482:
Merge patch series "can: support CAN XL" (2022-09-15 09:13:31 +0200)
----------------------------------------------------------------
linux-can-next-for-6.1-20220915
----------------------------------------------------------------
Biju Das (2):
dt-bindings: can: nxp,sja1000: Document RZ/N1 power-domains support
can: sja1000: Add support for RZ/N1 SJA1000 CAN Controller
Christophe JAILLET (1):
can: rcar_canfd: Use dev_err_probe() to simplify code and better handle -EPROBE_DEFER
Dario Binacchi (1):
docs: networking: device drivers: flexcan: fix invalid email
Gustavo A. R. Silva (1):
can: etas_es58x: Replace zero-length array with DECLARE_FLEX_ARRAY() helper
Jinpeng Cui (2):
can: sja1000: remove redundant variable ret
can: kvaser_pciefd: remove redundant variable ret
John Whittington (1):
can: gs_usb: add RX and TX hardware timestamp support
Kenneth Lee (1):
can: kvaser_usb: kvaser_usb_hydra: Use kzalloc for allocating only one element
Krzysztof Kozlowski (1):
dt-bindings: net: can: nxp,sja1000: drop ref from reg-io-width
Marc Kleine-Budde (6):
can: rx-offload: can_rx_offload_init_queue(): fix typo
can: flexcan: fix typo: FLEXCAN_QUIRK_SUPPPORT_* -> FLEXCAN_QUIRK_SUPPORT_*
can: gs_usb: use common spelling of GS_USB in macros
Merge patch series "can: gs_usb: hardware timestamp support"
Merge patch series "can: raw: random optimizations"
Merge patch series "can: support CAN XL"
Oliver Hartkopp (7):
can: skb: unify skb CAN frame identification helpers
can: skb: add skb CAN frame data length helpers
can: set CANFD_FDF flag in all CAN FD frame structures
can: canxl: introduce CAN XL data structure
can: canxl: update CAN infrastructure for CAN XL frames
can: dev: add CAN XL support to virtual CAN
can: raw: add CAN XL support
Yang Yingliang (1):
can: flexcan: Switch to use dev_err_probe() helper
Ziyang Xuan (2):
can: raw: process optimization in raw_init()
can: raw: use guard clause to optimize nesting in raw_rcv()
.../devicetree/bindings/net/can/nxp,sja1000.yaml | 6 +-
.../device_drivers/can/freescale/flexcan.rst | 2 +-
drivers/net/can/ctucanfd/ctucanfd_base.c | 1 -
drivers/net/can/dev/rx-offload.c | 4 +-
drivers/net/can/dev/skb.c | 113 +++++++----
drivers/net/can/flexcan/flexcan-core.c | 59 +++---
drivers/net/can/flexcan/flexcan.h | 20 +-
drivers/net/can/kvaser_pciefd.c | 7 +-
drivers/net/can/rcar/rcar_canfd.c | 26 +--
drivers/net/can/sja1000/sja1000.c | 6 +-
drivers/net/can/sja1000/sja1000_platform.c | 38 +++-
drivers/net/can/usb/etas_es58x/es58x_core.h | 2 +-
drivers/net/can/usb/gs_usb.c | 215 +++++++++++++++++++--
drivers/net/can/usb/kvaser_usb/kvaser_usb_hydra.c | 20 +-
drivers/net/can/vcan.c | 12 +-
drivers/net/can/vxcan.c | 8 +-
include/linux/can/dev.h | 5 +
include/linux/can/skb.h | 57 +++++-
include/uapi/linux/can.h | 55 +++++-
include/uapi/linux/can/raw.h | 1 +
include/uapi/linux/if_ether.h | 1 +
net/can/af_can.c | 76 ++++----
net/can/bcm.c | 9 +-
net/can/gw.c | 4 +-
net/can/isotp.c | 2 +-
net/can/j1939/main.c | 4 +
net/can/raw.c | 82 +++++---
27 files changed, 616 insertions(+), 219 deletions(-)
next reply other threads:[~2022-09-15 8:20 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-09-15 8:19 Marc Kleine-Budde [this message]
2022-09-15 8:19 ` [PATCH net-next 01/23] can: rx-offload: can_rx_offload_init_queue(): fix typo Marc Kleine-Budde
2022-09-17 19:20 ` patchwork-bot+netdevbpf
2022-09-15 8:19 ` [PATCH net-next 02/23] can: flexcan: fix typo: FLEXCAN_QUIRK_SUPPPORT_* -> FLEXCAN_QUIRK_SUPPORT_* Marc Kleine-Budde
2022-09-15 8:19 ` [PATCH net-next 03/23] can: rcar_canfd: Use dev_err_probe() to simplify code and better handle -EPROBE_DEFER Marc Kleine-Budde
2022-09-15 8:19 ` [PATCH net-next 04/23] can: kvaser_usb: kvaser_usb_hydra: Use kzalloc for allocating only one element Marc Kleine-Budde
2022-09-15 8:19 ` [PATCH net-next 05/23] dt-bindings: can: nxp,sja1000: Document RZ/N1 power-domains support Marc Kleine-Budde
2022-09-15 8:19 ` [PATCH net-next 06/23] can: sja1000: Add support for RZ/N1 SJA1000 CAN Controller Marc Kleine-Budde
2022-09-15 8:19 ` [PATCH net-next 07/23] can: sja1000: remove redundant variable ret Marc Kleine-Budde
2022-09-15 8:19 ` [PATCH net-next 08/23] can: kvaser_pciefd: " Marc Kleine-Budde
2022-09-15 8:19 ` [PATCH net-next 09/23] can: gs_usb: use common spelling of GS_USB in macros Marc Kleine-Budde
2022-09-15 8:20 ` [PATCH net-next 10/23] can: gs_usb: add RX and TX hardware timestamp support Marc Kleine-Budde
2022-09-15 8:20 ` [PATCH net-next 11/23] can: etas_es58x: Replace zero-length array with DECLARE_FLEX_ARRAY() helper Marc Kleine-Budde
2022-09-15 8:20 ` [PATCH net-next 12/23] dt-bindings: net: can: nxp,sja1000: drop ref from reg-io-width Marc Kleine-Budde
2022-09-15 8:20 ` [PATCH net-next 13/23] docs: networking: device drivers: flexcan: fix invalid email Marc Kleine-Budde
2022-09-15 8:20 ` [PATCH net-next 14/23] can: raw: process optimization in raw_init() Marc Kleine-Budde
2022-09-15 8:20 ` [PATCH net-next 15/23] can: raw: use guard clause to optimize nesting in raw_rcv() Marc Kleine-Budde
2022-09-15 8:20 ` [PATCH net-next 16/23] can: flexcan: Switch to use dev_err_probe() helper Marc Kleine-Budde
2022-09-15 8:20 ` [PATCH net-next 17/23] can: skb: unify skb CAN frame identification helpers Marc Kleine-Budde
2022-09-15 8:20 ` [PATCH net-next 18/23] can: skb: add skb CAN frame data length helpers Marc Kleine-Budde
2022-09-15 8:20 ` [PATCH net-next 19/23] can: set CANFD_FDF flag in all CAN FD frame structures Marc Kleine-Budde
2022-09-15 8:20 ` [PATCH net-next 20/23] can: canxl: introduce CAN XL data structure Marc Kleine-Budde
2022-09-15 8:20 ` [PATCH net-next 21/23] can: canxl: update CAN infrastructure for CAN XL frames Marc Kleine-Budde
2022-09-15 8:20 ` [PATCH net-next 22/23] can: dev: add CAN XL support to virtual CAN Marc Kleine-Budde
2022-09-15 8:20 ` [PATCH net-next 23/23] can: raw: add CAN XL support Marc Kleine-Budde
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220915082013.369072-1-mkl@pengutronix.de \
--to=mkl@pengutronix.de \
--cc=davem@davemloft.net \
--cc=kernel@pengutronix.de \
--cc=kuba@kernel.org \
--cc=linux-can@vger.kernel.org \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).