Wherever possible use the function ops provided by auxiliary bus instead of using proprietary ops. Defined bnxt_re_suspend and bnxt_re_resume calls which can be invoked by the bnxt_en driver instead of the ULP stop/start calls. Signed-off-by: Ajit Khaparde Reviewed-by: Andy Gospodarek Reviewed-by: Selvin Xavier --- drivers/infiniband/hw/bnxt_re/main.c | 102 +++++++++++------- drivers/net/ethernet/broadcom/bnxt/bnxt_ulp.c | 40 ++++--- drivers/net/ethernet/broadcom/bnxt/bnxt_ulp.h | 2 - 3 files changed, 87 insertions(+), 57 deletions(-) diff --git a/drivers/infiniband/hw/bnxt_re/main.c b/drivers/infiniband/hw/bnxt_re/main.c index e1777c8e6d5e..ae04198c33b7 100644 --- a/drivers/infiniband/hw/bnxt_re/main.c +++ b/drivers/infiniband/hw/bnxt_re/main.c @@ -226,45 +226,6 @@ static void bnxt_re_set_resource_limits(struct bnxt_re_dev *rdev) bnxt_re_limit_vf_res(&rdev->qplib_ctx, num_vfs); } -/* for handling bnxt_en callbacks later */ -static void bnxt_re_stop(void *p) -{ - struct bnxt_re_dev *rdev = p; - struct bnxt *bp; - - if (!rdev) - return; - - /* L2 driver invokes this callback during device error/crash or device - * reset. Current RoCE driver doesn't recover the device in case of - * error. Handle the error by dispatching fatal events to all qps - * ie. by calling bnxt_re_dev_stop and release the MSIx vectors as - * L2 driver want to modify the MSIx table. - */ - bp = netdev_priv(rdev->netdev); - - ibdev_info(&rdev->ibdev, "Handle device stop call from L2 driver"); - /* Check the current device state from L2 structure and move the - * device to detached state if FW_FATAL_COND is set. - * This prevents more commands to HW during clean-up, - * in case the device is already in error. - */ - if (test_bit(BNXT_STATE_FW_FATAL_COND, &bp->state)) - set_bit(ERR_DEVICE_DETACHED, &rdev->rcfw.cmdq.flags); - - bnxt_re_dev_stop(rdev); - bnxt_re_stop_irq(rdev); - /* Move the device states to detached and avoid sending any more - * commands to HW - */ - set_bit(BNXT_RE_FLAG_ERR_DEVICE_DETACHED, &rdev->flags); - set_bit(ERR_DEVICE_DETACHED, &rdev->rcfw.cmdq.flags); -} - -static void bnxt_re_start(void *p) -{ -} - static void bnxt_re_sriov_config(void *p, int num_vfs) { struct bnxt_re_dev *rdev = p; @@ -341,8 +302,6 @@ static void bnxt_re_start_irq(void *handle, struct bnxt_msix_entry *ent) } static struct bnxt_ulp_ops bnxt_re_ulp_ops = { - .ulp_stop = bnxt_re_stop, - .ulp_start = bnxt_re_start, .ulp_sriov_config = bnxt_re_sriov_config, .ulp_irq_stop = bnxt_re_stop_irq, .ulp_irq_restart = bnxt_re_start_irq @@ -1585,6 +1544,65 @@ static int bnxt_re_probe(struct auxiliary_device *adev, return rc; } +static int bnxt_re_suspend(struct auxiliary_device *adev, pm_message_t state) +{ + struct bnxt_re_dev *rdev = auxiliary_get_drvdata(adev); + struct bnxt *bp; + + if (!rdev) + return 0; + + mutex_lock(&bnxt_re_mutex); + /* L2 driver may invoke this callback during device error/crash or device + * reset. Current RoCE driver doesn't recover the device in case of + * error. Handle the error by dispatching fatal events to all qps + * ie. by calling bnxt_re_dev_stop and release the MSIx vectors as + * L2 driver want to modify the MSIx table. + */ + bp = netdev_priv(rdev->netdev); + + ibdev_info(&rdev->ibdev, "Handle device suspend call"); + /* Check the current device state from L2 structure and move the + * device to detached state if FW_FATAL_COND is set. + * This prevents more commands to HW during clean-up, + * in case the device is already in error. + */ + if (test_bit(BNXT_STATE_FW_FATAL_COND, &bp->state)) + set_bit(ERR_DEVICE_DETACHED, &rdev->rcfw.cmdq.flags); + + bnxt_re_dev_stop(rdev); + bnxt_re_stop_irq(rdev); + /* Move the device states to detached and avoid sending any more + * commands to HW + */ + set_bit(BNXT_RE_FLAG_ERR_DEVICE_DETACHED, &rdev->flags); + set_bit(ERR_DEVICE_DETACHED, &rdev->rcfw.cmdq.flags); + mutex_unlock(&bnxt_re_mutex); + + return 0; +} + +static int bnxt_re_resume(struct auxiliary_device *adev) +{ + struct bnxt_re_dev *rdev = auxiliary_get_drvdata(adev); + + if (!rdev) + return 0; + + mutex_lock(&bnxt_re_mutex); + /* L2 driver may invoke this callback during device recovery, resume. + * reset. Current RoCE driver doesn't recover the device in case of + * error. Handle the error by dispatching fatal events to all qps + * ie. by calling bnxt_re_dev_stop and release the MSIx vectors as + * L2 driver want to modify the MSIx table. + */ + + ibdev_info(&rdev->ibdev, "Handle device resume call"); + mutex_unlock(&bnxt_re_mutex); + + return 0; +} + static const struct auxiliary_device_id bnxt_re_id_table[] = { { .name = BNXT_ADEV_NAME ".rdma", }, {}, @@ -1597,6 +1615,8 @@ static struct auxiliary_driver bnxt_re_driver = { .probe = bnxt_re_probe, .remove = bnxt_re_remove, .shutdown = bnxt_re_shutdown, + .suspend = bnxt_re_suspend, + .resume = bnxt_re_resume, .id_table = bnxt_re_id_table, }; diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_ulp.c b/drivers/net/ethernet/broadcom/bnxt/bnxt_ulp.c index 247e76bc23ac..0fe4730239e3 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt_ulp.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_ulp.c @@ -272,26 +272,31 @@ static void bnxt_ulp_put(struct bnxt_ulp *ulp) void bnxt_ulp_stop(struct bnxt *bp) { + struct bnxt_aux_dev *bnxt_aux = bp->aux_dev; struct bnxt_en_dev *edev = bp->edev; - struct bnxt_ulp_ops *ops; - struct bnxt_ulp *ulp; if (!edev) return; edev->flags |= BNXT_EN_FLAG_ULP_STOPPED; - ulp = edev->ulp_tbl; - ops = rtnl_dereference(ulp->ulp_ops); - if (!ops || !ops->ulp_stop) - return; - ops->ulp_stop(ulp->handle); + if (bnxt_aux) { + struct auxiliary_device *adev; + + adev = &bnxt_aux->aux_dev; + if (adev->dev.driver) { + struct auxiliary_driver *adrv; + pm_message_t pm = {}; + + adrv = to_auxiliary_drv(adev->dev.driver); + adrv->suspend(adev, pm); + } + } } void bnxt_ulp_start(struct bnxt *bp, int err) { + struct bnxt_aux_dev *bnxt_aux = bp->aux_dev; struct bnxt_en_dev *edev = bp->edev; - struct bnxt_ulp_ops *ops; - struct bnxt_ulp *ulp; if (!edev) return; @@ -301,11 +306,18 @@ void bnxt_ulp_start(struct bnxt *bp, int err) if (err) return; - ulp = edev->ulp_tbl; - ops = rtnl_dereference(ulp->ulp_ops); - if (!ops || !ops->ulp_start) - return; - ops->ulp_start(ulp->handle); + if (bnxt_aux) { + struct auxiliary_device *adev; + + adev = &bnxt_aux->aux_dev; + if (adev->dev.driver) { + struct auxiliary_driver *adrv; + + adrv = to_auxiliary_drv(adev->dev.driver); + adrv->resume(adev); + } + } + } void bnxt_ulp_sriov_cfg(struct bnxt *bp, int num_vfs) diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_ulp.h b/drivers/net/ethernet/broadcom/bnxt/bnxt_ulp.h index 75fdd523d34d..b31a8538137e 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt_ulp.h +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_ulp.h @@ -27,8 +27,6 @@ struct bnxt_msix_entry { }; struct bnxt_ulp_ops { - void (*ulp_stop)(void *); - void (*ulp_start)(void *); void (*ulp_sriov_config)(void *, int); void (*ulp_irq_stop)(void *); void (*ulp_irq_restart)(void *, struct bnxt_msix_entry *); -- 2.37.1 (Apple Git-137.1)