From: Srujana Challa <schalla@marvell.com>
To: <netdev@vger.kernel.org>
Cc: <davem@davemloft.net>, <kuba@kernel.org>, <edumazet@google.com>,
<pabeni@redhat.com>, <jerinj@marvell.com>, <sgoutham@marvell.com>,
<lcherian@marvell.com>, <gakula@marvell.com>,
<sbhatta@marvell.com>, <hkelam@marvell.com>,
<schalla@marvell.com>
Subject: [PATCH v2 net-next,3/8] octeontx2-af: modify FLR sequence for CPT
Date: Thu, 12 Jan 2023 10:11:42 +0530 [thread overview]
Message-ID: <20230112044147.931159-4-schalla@marvell.com> (raw)
In-Reply-To: <20230112044147.931159-1-schalla@marvell.com>
The existing FLR sequence mentioned in HRM requires a dummy LMTST to CPT
but LMTST can't be submitted through BAR2 ALIAS registers. So, HW team
provided a new sequence to avoid dummy LMTST. This patch adds code for
the same.
Signed-off-by: Srujana Challa <schalla@marvell.com>
---
.../net/ethernet/marvell/octeontx2/af/rvu.h | 12 +++
.../ethernet/marvell/octeontx2/af/rvu_cpt.c | 86 +++++++++----------
.../ethernet/marvell/octeontx2/af/rvu_reg.h | 2 +
3 files changed, 53 insertions(+), 47 deletions(-)
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu.h b/drivers/net/ethernet/marvell/octeontx2/af/rvu.h
index 7f0a64731c67..20c75d7c962e 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/rvu.h
+++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu.h
@@ -459,6 +459,7 @@ struct rvu {
struct rvu_pfvf *pf;
struct rvu_pfvf *hwvf;
struct mutex rsrc_lock; /* Serialize resource alloc/free */
+ struct mutex alias_lock; /* Serialize bar2 alias access */
int vfs; /* Number of VFs attached to RVU */
int nix_blkaddr[MAX_NIX_BLKS];
@@ -546,6 +547,17 @@ static inline u64 rvupf_read64(struct rvu *rvu, u64 offset)
return readq(rvu->pfreg_base + offset);
}
+static inline void rvu_bar2_sel_write64(struct rvu *rvu, u64 block, u64 offset, u64 val)
+{
+ /* HW requires read back of RVU_AF_BAR2_SEL register to make sure completion of
+ * write operation.
+ */
+ rvu_write64(rvu, block, offset, val);
+ rvu_read64(rvu, block, offset);
+ /* Barrier to ensure read completes before accessing LF registers */
+ mb();
+}
+
/* Silicon revisions */
static inline bool is_rvu_pre_96xx_C0(struct rvu *rvu)
{
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu_cpt.c b/drivers/net/ethernet/marvell/octeontx2/af/rvu_cpt.c
index 1cd34914cb86..e8973294c4f8 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/rvu_cpt.c
+++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu_cpt.c
@@ -930,68 +930,63 @@ static void cpt_rxc_teardown(struct rvu *rvu, int blkaddr)
dev_warn(rvu->dev, "Poll for RXC zombie count hits hard loop counter\n");
}
-#define INPROG_INFLIGHT(reg) ((reg) & 0x1FF)
-#define INPROG_GRB_PARTIAL(reg) ((reg) & BIT_ULL(31))
-#define INPROG_GRB(reg) (((reg) >> 32) & 0xFF)
-#define INPROG_GWB(reg) (((reg) >> 40) & 0xFF)
+#define INFLIGHT GENMASK_ULL(8, 0)
+#define GRB_CNT GENMASK_ULL(39, 32)
+#define GWB_CNT GENMASK_ULL(47, 40)
+#define XQ_XOR GENMASK_ULL(63, 63)
+#define DQPTR GENMASK_ULL(19, 0)
+#define NQPTR GENMASK_ULL(51, 32)
static void cpt_lf_disable_iqueue(struct rvu *rvu, int blkaddr, int slot)
{
- int i = 0, hard_lp_ctr = 100000;
- u64 inprog, grp_ptr;
- u16 nq_ptr, dq_ptr;
+ int timeout = 1000000;
+ u64 inprog, inst_ptr;
+ u64 qsize, pending;
+ int i = 0;
/* Disable instructions enqueuing */
rvu_write64(rvu, blkaddr, CPT_AF_BAR2_ALIASX(slot, CPT_LF_CTL), 0x0);
- /* Disable executions in the LF's queue */
inprog = rvu_read64(rvu, blkaddr,
CPT_AF_BAR2_ALIASX(slot, CPT_LF_INPROG));
- inprog &= ~BIT_ULL(16);
+ inprog |= BIT_ULL(16);
rvu_write64(rvu, blkaddr,
CPT_AF_BAR2_ALIASX(slot, CPT_LF_INPROG), inprog);
- /* Wait for CPT queue to become execution-quiescent */
+ qsize = rvu_read64(rvu, blkaddr,
+ CPT_AF_BAR2_ALIASX(slot, CPT_LF_Q_SIZE)) & 0x7FFF;
do {
- inprog = rvu_read64(rvu, blkaddr,
- CPT_AF_BAR2_ALIASX(slot, CPT_LF_INPROG));
- if (INPROG_GRB_PARTIAL(inprog)) {
- i = 0;
- hard_lp_ctr--;
- } else {
- i++;
- }
-
- grp_ptr = rvu_read64(rvu, blkaddr,
- CPT_AF_BAR2_ALIASX(slot,
- CPT_LF_Q_GRP_PTR));
- nq_ptr = (grp_ptr >> 32) & 0x7FFF;
- dq_ptr = grp_ptr & 0x7FFF;
-
- } while (hard_lp_ctr && (i < 10) && (nq_ptr != dq_ptr));
+ inst_ptr = rvu_read64(rvu, blkaddr,
+ CPT_AF_BAR2_ALIASX(slot, CPT_LF_Q_INST_PTR));
+ pending = (FIELD_GET(XQ_XOR, inst_ptr) * qsize * 40) +
+ FIELD_GET(NQPTR, inst_ptr) -
+ FIELD_GET(DQPTR, inst_ptr);
+ udelay(1);
+ timeout--;
+ } while ((pending != 0) && (timeout != 0));
- if (hard_lp_ctr == 0)
- dev_warn(rvu->dev, "CPT FLR hits hard loop counter\n");
+ if (timeout == 0)
+ dev_warn(rvu->dev, "TIMEOUT: CPT poll on pending instructions\n");
- i = 0;
- hard_lp_ctr = 100000;
+ timeout = 1000000;
+ /* Wait for CPT queue to become execution-quiescent */
do {
inprog = rvu_read64(rvu, blkaddr,
CPT_AF_BAR2_ALIASX(slot, CPT_LF_INPROG));
- if ((INPROG_INFLIGHT(inprog) == 0) &&
- (INPROG_GWB(inprog) < 40) &&
- ((INPROG_GRB(inprog) == 0) ||
- (INPROG_GRB((inprog)) == 40))) {
+ if ((FIELD_GET(INFLIGHT, inprog) == 0) &&
+ (FIELD_GET(GRB_CNT, inprog) == 0)) {
i++;
} else {
i = 0;
- hard_lp_ctr--;
+ timeout--;
}
- } while (hard_lp_ctr && (i < 10));
+ } while ((timeout != 0) && (i < 10));
- if (hard_lp_ctr == 0)
- dev_warn(rvu->dev, "CPT FLR hits hard loop counter\n");
+ if (timeout == 0)
+ dev_warn(rvu->dev, "TIMEOUT: CPT poll on inflight count\n");
+ /* Wait for 2 us to flush all queue writes to memory */
+ udelay(2);
}
int rvu_cpt_lf_teardown(struct rvu *rvu, u16 pcifunc, int blkaddr, int lf, int slot)
@@ -1001,18 +996,15 @@ int rvu_cpt_lf_teardown(struct rvu *rvu, u16 pcifunc, int blkaddr, int lf, int s
if (is_cpt_pf(rvu, pcifunc) || is_cpt_vf(rvu, pcifunc))
cpt_rxc_teardown(rvu, blkaddr);
+ mutex_lock(&rvu->alias_lock);
/* Enable BAR2 ALIAS for this pcifunc. */
reg = BIT_ULL(16) | pcifunc;
- rvu_write64(rvu, blkaddr, CPT_AF_BAR2_SEL, reg);
+ rvu_bar2_sel_write64(rvu, blkaddr, CPT_AF_BAR2_SEL, reg);
cpt_lf_disable_iqueue(rvu, blkaddr, slot);
- /* Set group drop to help clear out hardware */
- reg = rvu_read64(rvu, blkaddr, CPT_AF_BAR2_ALIASX(slot, CPT_LF_INPROG));
- reg |= BIT_ULL(17);
- rvu_write64(rvu, blkaddr, CPT_AF_BAR2_ALIASX(slot, CPT_LF_INPROG), reg);
-
- rvu_write64(rvu, blkaddr, CPT_AF_BAR2_SEL, 0);
+ rvu_bar2_sel_write64(rvu, blkaddr, CPT_AF_BAR2_SEL, 0);
+ mutex_unlock(&rvu->alias_lock);
return 0;
}
@@ -1147,7 +1139,7 @@ int rvu_cpt_ctx_flush(struct rvu *rvu, u16 pcifunc)
/* Enable BAR2 ALIAS for this pcifunc. */
reg = BIT_ULL(16) | pcifunc;
- rvu_write64(rvu, blkaddr, CPT_AF_BAR2_SEL, reg);
+ rvu_bar2_sel_write64(rvu, blkaddr, CPT_AF_BAR2_SEL, reg);
for (i = 0; i < max_ctx_entries; i++) {
cam_data = rvu_read64(rvu, blkaddr, CPT_AF_CTX_CAM_DATA(i));
@@ -1160,7 +1152,7 @@ int rvu_cpt_ctx_flush(struct rvu *rvu, u16 pcifunc)
reg);
}
}
- rvu_write64(rvu, blkaddr, CPT_AF_BAR2_SEL, 0);
+ rvu_bar2_sel_write64(rvu, blkaddr, CPT_AF_BAR2_SEL, 0);
unlock:
mutex_unlock(&rvu->rsrc_lock);
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu_reg.h b/drivers/net/ethernet/marvell/octeontx2/af/rvu_reg.h
index 0e0d536645ac..5437bd20c719 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/rvu_reg.h
+++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu_reg.h
@@ -545,6 +545,8 @@
#define CPT_LF_CTL 0x10
#define CPT_LF_INPROG 0x40
+#define CPT_LF_Q_SIZE 0x100
+#define CPT_LF_Q_INST_PTR 0x110
#define CPT_LF_Q_GRP_PTR 0x120
#define CPT_LF_CTX_FLUSH 0x510
--
2.25.1
next prev parent reply other threads:[~2023-01-12 4:43 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-01-12 4:41 [PATCH v2 net-next,0/8] octeontx2-af: Miscellaneous changes for CPT Srujana Challa
2023-01-12 4:41 ` [PATCH v2 net-next,1/8] octeontx2-af: recover CPT engine when it gets fault Srujana Challa
2023-01-12 4:41 ` [PATCH v2 net-next,2/8] octeontx2-af: add mbox for CPT LF reset Srujana Challa
2023-01-12 4:41 ` Srujana Challa [this message]
2023-01-12 4:41 ` [PATCH v2 net-next,4/8] octeontx2-af: optimize cpt pf identification Srujana Challa
2023-01-12 4:41 ` [PATCH v2 net-next,5/8] octeontx2-af: restore rxc conf after teardown sequence Srujana Challa
2023-01-12 4:41 ` [PATCH v2 net-next,6/8] octeontx2-af: update CPT inbound inline IPsec config mailbox Srujana Challa
2023-01-12 4:41 ` [PATCH v2 net-next,7/8] octeontx2-af: add ctx ilen to cpt lf alloc mailbox Srujana Challa
2023-01-13 5:04 ` Jakub Kicinski
2023-01-12 4:41 ` [PATCH v2 net-next,8/8] octeontx2-af: add mbox to return CPT_AF_FLT_INT info Srujana Challa
2023-01-13 5:05 ` Jakub Kicinski
2023-01-12 5:24 ` [PATCH v2 net-next,0/8] octeontx2-af: Miscellaneous changes for CPT Jakub Kicinski
-- strict thread matches above, loose matches on Subject: below --
2023-01-11 12:23 Srujana Challa
2023-01-11 12:23 ` [PATCH v2 net-next,3/8] octeontx2-af: modify FLR sequence " Srujana Challa
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230112044147.931159-4-schalla@marvell.com \
--to=schalla@marvell.com \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=gakula@marvell.com \
--cc=hkelam@marvell.com \
--cc=jerinj@marvell.com \
--cc=kuba@kernel.org \
--cc=lcherian@marvell.com \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=sbhatta@marvell.com \
--cc=sgoutham@marvell.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).