From: Andrew Halaney <ahalaney@redhat.com>
To: linux-kernel@vger.kernel.org
Cc: agross@kernel.org, andersson@kernel.org,
konrad.dybcio@linaro.org, davem@davemloft.net,
edumazet@google.com, kuba@kernel.org, pabeni@redhat.com,
robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org,
vkoul@kernel.org, bhupesh.sharma@linaro.org,
mturquette@baylibre.com, sboyd@kernel.org,
peppe.cavallaro@st.com, alexandre.torgue@foss.st.com,
joabreu@synopsys.com, mcoquelin.stm32@gmail.com,
richardcochran@gmail.com, linux@armlinux.org.uk,
veekhee@apple.com, tee.min.tan@linux.intel.com,
mohammad.athari.ismail@intel.com, jonathanh@nvidia.com,
ruppala@nvidia.com, bmasney@redhat.com,
andrey.konovalov@linaro.org, linux-arm-msm@vger.kernel.org,
netdev@vger.kernel.org, devicetree@vger.kernel.org,
linux-clk@vger.kernel.org,
linux-stm32@st-md-mailman.stormreply.com,
linux-arm-kernel@lists.infradead.org, ncai@quicinc.com,
jsuraj@qti.qualcomm.com, hisunil@quicinc.com,
Andrew Halaney <ahalaney@redhat.com>
Subject: [PATCH net-next 10/11] net: ethernet: stmmac: dwmac-qcom-ethqos: Use loopback_en for all speeds
Date: Mon, 13 Mar 2023 11:56:19 -0500 [thread overview]
Message-ID: <20230313165620.128463-11-ahalaney@redhat.com> (raw)
In-Reply-To: <20230313165620.128463-1-ahalaney@redhat.com>
It seems that this variable should be used for all speeds, not just
1000/100.
While at it refactor it slightly to be more readable, including fixing
the typo in the variable name.
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
---
.../stmicro/stmmac/dwmac-qcom-ethqos.c | 36 +++++++++----------
1 file changed, 17 insertions(+), 19 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
index 6f272cae330d..778852934e36 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
@@ -78,7 +78,7 @@ struct ethqos_emac_por {
struct ethqos_emac_driver_data {
const struct ethqos_emac_por *por;
unsigned int num_por;
- bool rgmii_config_looback_en;
+ bool rgmii_config_loopback_en;
};
struct qcom_ethqos {
@@ -91,7 +91,7 @@ struct qcom_ethqos {
const struct ethqos_emac_por *por;
unsigned int num_por;
- bool rgmii_config_looback_en;
+ bool rgmii_config_loopback_en;
};
static int rgmii_readl(struct qcom_ethqos *ethqos, unsigned int offset)
@@ -183,7 +183,7 @@ static const struct ethqos_emac_por emac_v2_3_0_por[] = {
static const struct ethqos_emac_driver_data emac_v2_3_0_data = {
.por = emac_v2_3_0_por,
.num_por = ARRAY_SIZE(emac_v2_3_0_por),
- .rgmii_config_looback_en = true,
+ .rgmii_config_loopback_en = true,
};
static const struct ethqos_emac_por emac_v2_1_0_por[] = {
@@ -198,7 +198,7 @@ static const struct ethqos_emac_por emac_v2_1_0_por[] = {
static const struct ethqos_emac_driver_data emac_v2_1_0_data = {
.por = emac_v2_1_0_por,
.num_por = ARRAY_SIZE(emac_v2_1_0_por),
- .rgmii_config_looback_en = false,
+ .rgmii_config_loopback_en = false,
};
static int ethqos_dll_configure(struct qcom_ethqos *ethqos)
@@ -281,6 +281,7 @@ static int ethqos_rgmii_macro_init(struct qcom_ethqos *ethqos)
{
int phy_mode;
int phase_shift;
+ int loopback;
/* Determine if the PHY adds a 2 ns TX delay or the MAC handles it */
phy_mode = device_get_phy_mode(ðqos->pdev->dev);
@@ -293,6 +294,12 @@ static int ethqos_rgmii_macro_init(struct qcom_ethqos *ethqos)
rgmii_updatel(ethqos, RGMII_CONFIG2_TX_TO_RX_LOOPBACK_EN,
0, RGMII_IO_MACRO_CONFIG2);
+ /* Determine if this platform wants loopback enabled after programming */
+ if (ethqos->rgmii_config_loopback_en)
+ loopback = RGMII_CONFIG_LOOPBACK_EN;
+ else
+ loopback = 0;
+
/* Select RGMII, write 0 to interface select */
rgmii_updatel(ethqos, RGMII_CONFIG_INTF_SEL,
0, RGMII_IO_MACRO_CONFIG);
@@ -325,12 +332,8 @@ static int ethqos_rgmii_macro_init(struct qcom_ethqos *ethqos)
rgmii_updatel(ethqos, SDCC_DDR_CONFIG_PRG_DLY_EN,
SDCC_DDR_CONFIG_PRG_DLY_EN,
SDCC_HC_REG_DDR_CONFIG);
- if (ethqos->rgmii_config_looback_en)
- rgmii_updatel(ethqos, RGMII_CONFIG_LOOPBACK_EN,
- RGMII_CONFIG_LOOPBACK_EN, RGMII_IO_MACRO_CONFIG);
- else
- rgmii_updatel(ethqos, RGMII_CONFIG_LOOPBACK_EN,
- 0, RGMII_IO_MACRO_CONFIG);
+ rgmii_updatel(ethqos, RGMII_CONFIG_LOOPBACK_EN,
+ loopback, RGMII_IO_MACRO_CONFIG);
break;
case SPEED_100:
@@ -362,13 +365,8 @@ static int ethqos_rgmii_macro_init(struct qcom_ethqos *ethqos)
rgmii_updatel(ethqos, SDCC_DDR_CONFIG_EXT_PRG_RCLK_DLY_EN,
SDCC_DDR_CONFIG_EXT_PRG_RCLK_DLY_EN,
SDCC_HC_REG_DDR_CONFIG);
- if (ethqos->rgmii_config_looback_en)
- rgmii_updatel(ethqos, RGMII_CONFIG_LOOPBACK_EN,
- RGMII_CONFIG_LOOPBACK_EN, RGMII_IO_MACRO_CONFIG);
- else
- rgmii_updatel(ethqos, RGMII_CONFIG_LOOPBACK_EN,
- 0, RGMII_IO_MACRO_CONFIG);
-
+ rgmii_updatel(ethqos, RGMII_CONFIG_LOOPBACK_EN,
+ loopback, RGMII_IO_MACRO_CONFIG);
break;
case SPEED_10:
@@ -402,7 +400,7 @@ static int ethqos_rgmii_macro_init(struct qcom_ethqos *ethqos)
SDCC_DDR_CONFIG_EXT_PRG_RCLK_DLY_EN,
SDCC_HC_REG_DDR_CONFIG);
rgmii_updatel(ethqos, RGMII_CONFIG_LOOPBACK_EN,
- RGMII_CONFIG_LOOPBACK_EN, RGMII_IO_MACRO_CONFIG);
+ loopback, RGMII_IO_MACRO_CONFIG);
break;
default:
dev_err(ðqos->pdev->dev,
@@ -547,7 +545,7 @@ static int qcom_ethqos_probe(struct platform_device *pdev)
data = of_device_get_match_data(&pdev->dev);
ethqos->por = data->por;
ethqos->num_por = data->num_por;
- ethqos->rgmii_config_looback_en = data->rgmii_config_looback_en;
+ ethqos->rgmii_config_loopback_en = data->rgmii_config_loopback_en;
ethqos->rgmii_clk = devm_clk_get(&pdev->dev, "rgmii");
if (IS_ERR(ethqos->rgmii_clk)) {
--
2.39.2
next prev parent reply other threads:[~2023-03-13 17:01 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-03-13 16:56 [PATCH net-next 00/11] Add EMAC3 support for sa8540p-ride Andrew Halaney
2023-03-13 16:56 ` [PATCH net-next 01/11] dt-bindings: net: snps,dwmac: Update interrupt-names Andrew Halaney
2023-03-16 7:13 ` Krzysztof Kozlowski
2023-03-16 16:15 ` Andrew Halaney
2023-03-16 19:20 ` Krzysztof Kozlowski
2023-03-13 16:56 ` [PATCH net-next 02/11] dt-bindings: net: snps,dwmac: Add Qualcomm Ethernet ETHQOS compatibles Andrew Halaney
2023-03-13 16:56 ` [PATCH net-next 03/11] dt-bindings: net: qcom,ethqos: Convert bindings to yaml Andrew Halaney
2023-03-16 7:18 ` Krzysztof Kozlowski
2023-03-13 16:56 ` [PATCH net-next 04/11] dt-bindings: net: qcom,ethqos: Add Qualcomm sc8280xp compatibles Andrew Halaney
2023-03-16 7:19 ` Krzysztof Kozlowski
2023-03-13 16:56 ` [PATCH net-next 05/11] clk: qcom: gcc-sc8280xp: Add EMAC GDSCs Andrew Halaney
2023-03-13 22:57 ` Stephen Boyd
2023-03-14 13:53 ` Andrew Halaney
2023-03-14 15:13 ` Konrad Dybcio
2023-03-14 16:08 ` Andrew Halaney
2023-03-16 22:21 ` Andrew Halaney
2023-03-13 16:56 ` [PATCH net-next 06/11] arm64: dts: qcom: sc8280xp: Add ethernet nodes Andrew Halaney
2023-03-13 16:56 ` [PATCH net-next 07/11] arm64: dts: qcom: sa8540p-ride: " Andrew Halaney
2023-03-13 16:56 ` [PATCH net-next 08/11] net: stmmac: Add EMAC3 variant of dwmac4 Andrew Halaney
2023-03-14 0:39 ` Jakub Kicinski
2023-03-16 18:36 ` Andrew Halaney
2023-03-16 18:52 ` Jakub Kicinski
2023-03-16 23:01 ` Russell King (Oracle)
2023-03-16 23:18 ` Jakub Kicinski
2023-03-14 0:59 ` Andrew Lunn
2023-03-13 16:56 ` [PATCH net-next 09/11] net: ethernet: stmmac: dwmac-qcom-ethqos: Respect phy-mode and TX delay Andrew Halaney
2023-03-13 16:56 ` Andrew Halaney [this message]
2023-03-13 16:56 ` [PATCH net-next 11/11] net: stmmac: dwmac-qcom-ethqos: Add EMAC3 support Andrew Halaney
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230313165620.128463-11-ahalaney@redhat.com \
--to=ahalaney@redhat.com \
--cc=agross@kernel.org \
--cc=alexandre.torgue@foss.st.com \
--cc=andersson@kernel.org \
--cc=andrey.konovalov@linaro.org \
--cc=bhupesh.sharma@linaro.org \
--cc=bmasney@redhat.com \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=edumazet@google.com \
--cc=hisunil@quicinc.com \
--cc=joabreu@synopsys.com \
--cc=jonathanh@nvidia.com \
--cc=jsuraj@qti.qualcomm.com \
--cc=konrad.dybcio@linaro.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=kuba@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=linux@armlinux.org.uk \
--cc=mcoquelin.stm32@gmail.com \
--cc=mohammad.athari.ismail@intel.com \
--cc=mturquette@baylibre.com \
--cc=ncai@quicinc.com \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=peppe.cavallaro@st.com \
--cc=richardcochran@gmail.com \
--cc=robh+dt@kernel.org \
--cc=ruppala@nvidia.com \
--cc=sboyd@kernel.org \
--cc=tee.min.tan@linux.intel.com \
--cc=veekhee@apple.com \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).