netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Donald Hunter <donald.hunter@gmail.com>
To: netdev@vger.kernel.org, Jakub Kicinski <kuba@kernel.org>,
	"David S. Miller" <davem@davemloft.net>,
	Eric Dumazet <edumazet@google.com>,
	Paolo Abeni <pabeni@redhat.com>
Cc: donald.hunter@redhat.com, Donald Hunter <donald.hunter@gmail.com>
Subject: [PATCH net-next v2 4/4] netlink: specs: add ynl spec for ovs_flow
Date: Sat, 27 May 2023 14:31:07 +0100	[thread overview]
Message-ID: <20230527133107.68161-5-donald.hunter@gmail.com> (raw)
In-Reply-To: <20230527133107.68161-1-donald.hunter@gmail.com>

Add a ynl specification for ovs_flow. This spec is sufficient to dump ovs
flows. Some attrs are left as binary blobs because ynl doesn't support C
arrays in struct definitions yet.

Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
---
 Documentation/netlink/specs/ovs_flow.yaml | 831 ++++++++++++++++++++++
 1 file changed, 831 insertions(+)
 create mode 100644 Documentation/netlink/specs/ovs_flow.yaml

diff --git a/Documentation/netlink/specs/ovs_flow.yaml b/Documentation/netlink/specs/ovs_flow.yaml
new file mode 100644
index 000000000000..3b0624c87074
--- /dev/null
+++ b/Documentation/netlink/specs/ovs_flow.yaml
@@ -0,0 +1,831 @@
+# SPDX-License-Identifier: ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)
+
+name: ovs_flow
+version: 1
+protocol: genetlink-legacy
+
+doc:
+  OVS flow configuration over generic netlink.
+
+definitions:
+  -
+    name: ovs-header
+    type: struct
+    doc: |
+      Header for OVS Generic Netlink messages.
+    members:
+      -
+        name: dp-ifindex
+        type: u32
+        doc: |
+          ifindex of local port for datapath (0 to make a request not specific
+          to a datapath).
+  -
+    name: ovs-flow-stats
+    type: struct
+    members:
+      -
+        name: n-packets
+        type: u64
+        doc: Number of matched packets.
+      -
+        name: n-bytes
+        type: u64
+        doc: Number of matched bytes.
+  -
+    name: ovs-key-mpls
+    type: struct
+    members:
+      -
+        name: mpls-lse
+        type: u32
+        byte-order: big-endian
+  -
+    name: ovs-key-ipv4
+    type: struct
+    members:
+      -
+        name: ipv4-src
+        type: u32
+        byte-order: big-endian
+      -
+        name: ipv4-dst
+        type: u32
+        byte-order: big-endian
+      -
+        name: ipv4-proto
+        type: u8
+      -
+        name: ipv4-tos
+        type: u8
+      -
+        name: ipv4-ttl
+        type: u8
+      -
+        name: ipv4-frag
+        type: u8
+        enum: ovs-frag-type
+  -
+    name: ovs-frag-type
+    type: enum
+    entries:
+      -
+        name: none
+        doc: Packet is not a fragment.
+      -
+        name: first
+        doc: Packet is a fragment with offset 0.
+      -
+        name: later
+        doc: Packet is a fragment with nonzero offset.
+      -
+        name: any
+        value: 255
+  -
+    name: ovs-key-tcp
+    type: struct
+    members:
+      -
+        name: tcp-src
+        type: u16
+        byte-order: big-endian
+      -
+        name: tcp-dst
+        type: u16
+        byte-order: big-endian
+  -
+    name: ovs-key-udp
+    type: struct
+    members:
+      -
+        name: udp-src
+        type: u16
+        byte-order: big-endian
+      -
+        name: udp-dst
+        type: u16
+        byte-order: big-endian
+  -
+    name: ovs-key-sctp
+    type: struct
+    members:
+      -
+        name: sctp-src
+        type: u16
+        byte-order: big-endian
+      -
+        name: sctp-dst
+        type: u16
+        byte-order: big-endian
+  -
+    name: ovs-key-icmp
+    type: struct
+    members:
+      -
+        name: icmp-type
+        type: u8
+      -
+        name: icmp-code
+        type: u8
+  -
+    name: ovs-key-ct-tuple-ipv4
+    type: struct
+    members:
+      -
+        name: ipv4-src
+        type: u32
+        byte-order: big-endian
+      -
+        name: ipv4-dst
+        type: u32
+        byte-order: big-endian
+      -
+        name: src-port
+        type: u16
+        byte-order: big-endian
+      -
+        name: dst-port
+        type: u16
+        byte-order: big-endian
+      -
+        name: ipv4-proto
+        type: u8
+  -
+    name: ovs-action-push-vlan
+    type: struct
+    members:
+      -
+        name: vlan_tpid
+        type: u16
+        byte-order: big-endian
+        doc: Tag protocol identifier (TPID) to push.
+      -
+        name: vlan_tci
+        type: u16
+        byte-order: big-endian
+        doc: Tag control identifier (TCI) to push.
+  -
+    name: ovs-ufid-flags
+    type: flags
+    entries:
+      - omit-key
+      - omit-mask
+      - omit-actions
+  -
+    name: ovs-action-hash
+    type: struct
+    members:
+      -
+        name: hash-algorithm
+        type: u32
+        doc: Algorithm used to compute hash prior to recirculation.
+      -
+        name: hash-basis
+        type: u32
+        doc: Basis used for computing hash.
+  -
+    name: ovs-hash-alg
+    type: enum
+    doc: |
+      Data path hash algorithm for computing Datapath hash. The algorithm type only specifies
+      the fields in a flow will be used as part of the hash. Each datapath is free to use its
+      own hash algorithm. The hash value will be opaque to the user space daemon.
+    entries:
+      - ovs-hash-alg-l4
+
+  -
+    name: ovs-action-push-mpls
+    type: struct
+    members:
+      -
+        name: lse
+        type: u32
+        byte-order: big-endian
+        doc: |
+          MPLS label stack entry to push
+      -
+        name: ethertype
+        type: u32
+        byte-order: big-endian
+        doc: |
+          Ethertype to set in the encapsulating ethernet frame.  The only values
+          ethertype should ever be given are ETH_P_MPLS_UC and ETH_P_MPLS_MC,
+          indicating MPLS unicast or multicast. Other are rejected.
+  -
+    name: ovs-action-add-mpls
+    type: struct
+    members:
+      -
+        name: lse
+        type: u32
+        byte-order: big-endian
+        doc: |
+          MPLS label stack entry to push
+      -
+        name: ethertype
+        type: u32
+        byte-order: big-endian
+        doc: |
+          Ethertype to set in the encapsulating ethernet frame.  The only values
+          ethertype should ever be given are ETH_P_MPLS_UC and ETH_P_MPLS_MC,
+          indicating MPLS unicast or multicast. Other are rejected.
+      -
+        name: tun-flags
+        type: u16
+        doc: |
+          MPLS tunnel attributes.
+  -
+    name: ct-state-flags
+    type: flags
+    entries:
+      -
+        name: new
+        doc: Beginning of a new connection.
+      -
+        name: established
+        doc: Part of an existing connenction
+      -
+        name: related
+        doc: Related to an existing connection.
+      -
+        name: reply-dir
+        doc: Flow is in the reply direction.
+      -
+        name: invalid
+        doc: Could not track the connection.
+      -
+        name: tracked
+        doc: Conntrack has occurred.
+      -
+        name: src-nat
+        doc: Packet's source address/port was mangled by NAT.
+      -
+        name: dst-nat
+        doc: Packet's destination address/port was mangled by NAT.
+
+attribute-sets:
+  -
+    name: flow-attrs
+    attributes:
+      -
+        name: key
+        type: nest
+        nested-attributes: key-attrs
+        doc: |
+          Nested attributes specifying the flow key. Always present in
+          notifications. Required for all requests (except dumps).
+      -
+        name: actions
+        type: nest
+        nested-attributes: action-attrs
+        doc: |
+          Nested attributes specifying the actions to take for packets that
+          match the key. Always present in notifications. Required for
+          OVS_FLOW_CMD_NEW requests, optional for OVS_FLOW_CMD_SET requests.  An
+          OVS_FLOW_CMD_SET without OVS_FLOW_ATTR_ACTIONS will not modify the
+          actions.  To clear the actions, an OVS_FLOW_ATTR_ACTIONS without any
+          nested attributes must be given.
+      -
+        name: stats
+        type: binary
+        struct: ovs-flow-stats
+        doc: |
+          Statistics for this flow. Present in notifications if the stats would
+          be nonzero. Ignored in requests.
+      -
+        name: tcp-flags
+        type: u8
+        doc: |
+          An 8-bit value giving the ORed value of all of the TCP flags seen on
+          packets in this flow. Only present in notifications for TCP flows, and
+          only if it would be nonzero. Ignored in requests.
+      -
+        name: used
+        type: u64
+        doc: |
+          A 64-bit integer giving the time, in milliseconds on the system
+          monotonic clock, at which a packet was last processed for this
+          flow. Only present in notifications if a packet has been processed for
+          this flow. Ignored in requests.
+      -
+        name: clear
+        type: flag
+        doc: |
+          If present in a OVS_FLOW_CMD_SET request, clears the last-used time,
+          accumulated TCP flags, and statistics for this flow.  Otherwise
+          ignored in requests. Never present in notifications.
+      -
+        name: mask
+        type: nest
+        nested-attributes: key-attrs
+        doc: |
+          Nested attributes specifying the mask bits for wildcarded flow
+          match. Mask bit value '1' specifies exact match with corresponding
+          flow key bit, while mask bit value '0' specifies a wildcarded
+          match. Omitting attribute is treated as wildcarding all corresponding
+          fields. Optional for all requests. If not present, all flow key bits
+          are exact match bits.
+      -
+        name: probe
+        type: binary
+        doc: |
+          Flow operation is a feature probe, error logging should be suppressed.
+      -
+        name: ufid
+        type: binary
+        doc: |
+          A value between 1-16 octets specifying a unique identifier for the
+          flow. Causes the flow to be indexed by this value rather than the
+          value of the OVS_FLOW_ATTR_KEY attribute. Optional for all
+          requests. Present in notifications if the flow was created with this
+          attribute.
+      -
+        name: ufid-flags
+        type: u32
+        enum: ovs-ufid-flags
+        doc: |
+          A 32-bit value of ORed flags that provide alternative semantics for
+          flow installation and retrieval. Optional for all requests.
+      -
+        name: pad
+        type: binary
+
+  -
+    name: key-attrs
+    attributes:
+      -
+        name: encap
+        type: nest
+        nested-attributes: key-attrs
+      -
+        name: priority
+        type: u32
+      -
+        name: in-port
+        type: u32
+      -
+        name: ethernet
+        type: binary
+        doc: struct ovs_key_ethernet
+      -
+        name: vlan
+        type: u16
+        byte-order: big-endian
+      -
+        name: ethertype
+        type: u16
+        byte-order: big-endian
+      -
+        name: ipv4
+        type: binary
+        struct: ovs-key-ipv4
+      -
+        name: ipv6
+        type: binary
+        doc: struct ovs_key_ipv6
+      -
+        name: tcp
+        type: binary
+        struct: ovs-key-tcp
+      -
+        name: udp
+        type: binary
+        struct: ovs-key-udp
+      -
+        name: icmp
+        type: binary
+        struct: ovs-key-icmp
+      -
+        name: icmpv6
+        type: binary
+        struct: ovs-key-icmp
+      -
+        name: arp
+        type: binary
+        doc: struct ovs_key_arp
+      -
+        name: nd
+        type: binary
+        doc: struct ovs_key_nd
+      -
+        name: skb-mark
+        type: u32
+      -
+        name: tunnel
+        type: nest
+        nested-attributes: tunnel-key-attrs
+      -
+        name: sctp
+        type: binary
+        struct: ovs-key-sctp
+      -
+        name: tcp-flags
+        type: u16
+        byte-order: big-endian
+      -
+        name: dp-hash
+        type: u32
+        doc: Value 0 indicates the hash is not computed by the datapath.
+      -
+        name: recirc-id
+        type: u32
+      -
+        name: mpls
+        type: binary
+        struct: ovs-key-mpls
+      -
+        name: ct-state
+        type: u32
+        enum: ct-state-flags
+        enum-as-flags: true
+      -
+        name: ct-zone
+        type: u16
+        doc: connection tracking zone
+      -
+        name: ct-mark
+        type: u32
+        doc: connection tracking mark
+      -
+        name: ct-labels
+        type: binary
+        doc: 16-octet connection tracking label
+      -
+        name: ct-orig-tuple-ipv4
+        type: binary
+        struct: ovs-key-ct-tuple-ipv4
+      -
+        name: ct-orig-tuple-ipv6
+        type: binary
+        doc: struct ovs_key_ct_tuple_ipv6
+      -
+        name: nsh
+        type: nest
+        nested-attributes: ovs-nsh-key-attrs
+      -
+        name: packet-type
+        type: u32
+        byte-order: big-endian
+        doc: Should not be sent to the kernel
+      -
+        name: nd-extensions
+        type: binary
+        doc: Should not be sent to the kernel
+      -
+        name: tunnel-info
+        type: binary
+        doc: struct ip_tunnel_info
+      -
+        name: ipv6-exthdrs
+        type: binary
+        doc: struct ovs_key_ipv6_exthdr
+  -
+    name: action-attrs
+    attributes:
+      -
+        name: output
+        type: u32
+        doc: ovs port number in datapath
+      -
+        name: userspace
+        type: nest
+        nested-attributes: userspace-attrs
+      -
+        name: set
+        type: nest
+        nested-attributes: key-attrs
+        doc: Replaces the contents of an existing header. The single nested attribute specifies a header to modify and its value.
+      -
+        name: push-vlan
+        type: binary
+        struct: ovs-action-push-vlan
+        doc: Push a new outermost 802.1Q or 802.1ad header onto the packet.
+      -
+        name: pop-vlan
+        type: flag
+        doc: Pop the outermost 802.1Q or 802.1ad header from the packet.
+      -
+        name: sample
+        type: nest
+        nested-attributes: sample-attrs
+        doc: |
+          Probabilistically executes actions, as specified in the nested attributes.
+      -
+        name: recirc
+        type: u32
+        doc: recirc id
+      -
+        name: hash
+        type: binary
+        struct: ovs-action-hash
+      -
+        name: push-mpls
+        type: binary
+        struct: ovs-action-push-mpls
+        doc: |
+          Push a new MPLS label stack entry onto the top of the packets MPLS
+          label stack. Set the ethertype of the encapsulating frame to either
+          ETH_P_MPLS_UC or ETH_P_MPLS_MC to indicate the new packet contents.
+      -
+        name: pop-mpls
+        type: u16
+        byte-order: big-endian
+        doc: ethertype
+      -
+        name: set-masked
+        type: nest
+        nested-attributes: key-attrs
+        doc: |
+          Replaces the contents of an existing header. A nested attribute
+          specifies a header to modify, its value, and a mask. For every bit set
+          in the mask, the corresponding bit value is copied from the value to
+          the packet header field, rest of the bits are left unchanged. The
+          non-masked value bits must be passed in as zeroes. Masking is not
+          supported for the OVS_KEY_ATTR_TUNNEL attribute.
+      -
+        name: ct
+        type: nest
+        nested-attributes: ct-attrs
+        doc: |
+          Track the connection. Populate the conntrack-related entries
+          in the flow key.
+      -
+        name: trunc
+        type: u32
+        doc: struct ovs_action_trunc is a u32 max length
+      -
+        name: push-eth
+        type: binary
+        doc: struct ovs_action_push_eth
+      -
+        name: pop-eth
+        type: flag
+      -
+        name: ct-clear
+        type: flag
+      -
+        name: push-nsh
+        type: nest
+        nested-attributes: ovs-nsh-key-attrs
+        doc: |
+          Push NSH header to the packet.
+      -
+        name: pop-nsh
+        type: flag
+        doc: |
+          Pop the outermost NSH header off the packet.
+      -
+        name: meter
+        type: u32
+        doc: |
+          Run packet through a meter, which may drop the packet, or modify the
+          packet (e.g., change the DSCP field)
+      -
+        name: clone
+        type: nest
+        nested-attributes: action-attrs
+        doc: |
+          Make a copy of the packet and execute a list of actions without
+          affecting the original packet and key.
+      -
+        name: check-pkt-len
+        type: nest
+        nested-attributes: check-pkt-len-attrs
+        doc: |
+          Check the packet length and execute a set of actions if greater than
+          the specified packet length, else execute another set of actions.
+      -
+        name: add-mpls
+        type: binary
+        struct: ovs-action-add-mpls
+        doc: |
+          Push a new MPLS label stack entry at the start of the packet or at the
+          start of the l3 header depending on the value of l3 tunnel flag in the
+          tun_flags field of this OVS_ACTION_ATTR_ADD_MPLS argument.
+      -
+        name: dec-ttl
+        type: nest
+        nested-attributes: dec-ttl-attrs
+  -
+    name: tunnel-key-attrs
+    attributes:
+      -
+        name: id
+        type: u64
+        byte-order: big-endian
+        value: 0
+      -
+        name: ipv4-src
+        type: u32
+        byte-order: big-endian
+      -
+        name: ipv4-dst
+        type: u32
+        byte-order: big-endian
+      -
+        name: tos
+        type: u8
+      -
+        name: ttl
+        type: u8
+      -
+        name: dont-fragment
+        type: flag
+      -
+        name: csum
+        type: flag
+      -
+        name: oam
+        type: flag
+      -
+        name: geneve-opts
+        type: binary
+        sub-type: u32
+      -
+        name: tp-src
+        type: u16
+        byte-order: big-endian
+      -
+        name: tp-dst
+        type: u16
+        byte-order: big-endian
+      -
+        name: vxlan-opts
+        type: nest
+        nested-attributes: vxlan-ext-attrs
+      -
+        name: ipv6-src
+        type: binary
+        doc: |
+          struct in6_addr source IPv6 address
+      -
+        name: ipv6-dst
+        type: binary
+        doc: |
+          struct in6_addr destination IPv6 address
+      -
+        name: pad
+        type: binary
+      -
+        name: erspan-opts
+        type: binary
+        doc: |
+          struct erspan_metadata
+      -
+        name: ipv4-info-bridge
+        type: flag
+  -
+    name: check-pkt-len-attrs
+    attributes:
+      -
+        name: pkt-len
+        type: u16
+      -
+        name: actions-if-greater
+        type: nest
+        nested-attributes: action-attrs
+      -
+        name: actions-if-less-equal
+        type: nest
+        nested-attributes: action-attrs
+  -
+    name: sample-attrs
+    attributes:
+      -
+        name: probability
+        type: u32
+      -
+        name: actions
+        type: nest
+        nested-attributes: action-attrs
+  -
+    name: userspace-attrs
+    attributes:
+      -
+        name: pid
+        type: u32
+      -
+        name: userdata
+        type: binary
+      -
+        name: egress-tun-port
+        type: u32
+      -
+        name: actions
+        type: flag
+  -
+    name: ovs-nsh-key-attrs
+    attributes:
+      -
+        name: base
+        type: binary
+      -
+        name: md1
+        type: binary
+      -
+        name: md2
+        type: binary
+  -
+    name: ct-attrs
+    attributes:
+      -
+        name: commit
+        type: flag
+      -
+        name: zone
+        type: u16
+      -
+        name: mark
+        type: binary
+      -
+        name: labels
+        type: binary
+      -
+        name: helper
+        type: string
+      -
+        name: nat
+        type: nest
+        nested-attributes: nat-attrs
+      -
+        name: force-commit
+        type: flag
+      -
+        name: eventmask
+        type: u32
+      -
+        name: timeout
+        type: string
+  -
+    name: nat-attrs
+    attributes:
+      -
+        name: src
+        type: binary
+      -
+        name: dst
+        type: binary
+      -
+        name: ip-min
+        type: binary
+      -
+        name: ip-max
+        type: binary
+      -
+        name: proto-min
+        type: binary
+      -
+        name: proto-max
+        type: binary
+      -
+        name: persistent
+        type: binary
+      -
+        name: proto-hash
+        type: binary
+      -
+        name: proto-random
+        type: binary
+  -
+    name: dec-ttl-attrs
+    attributes:
+      -
+        name: action
+        type: nest
+        nested-attributes: action-attrs
+  -
+    name: vxlan-ext-attrs
+    attributes:
+      -
+        name: gbp
+        type: u32
+
+operations:
+  fixed-header: ovs-header
+  list:
+    -
+      name: flow-get
+      doc: Get / dump OVS flow configuration and state
+      value: 3
+      attribute-set: flow-attrs
+      do: &flow-get-op
+        request:
+          attributes:
+            - dp-ifindex
+            - key
+            - ufid
+            - ufid-flags
+        reply:
+          attributes:
+            - dp-ifindex
+            - key
+            - ufid
+            - mask
+            - stats
+            - actions
+      dump: *flow-get-op
+
+mcast-groups:
+  list:
+    -
+      name: ovs_flow
-- 
2.39.0


  parent reply	other threads:[~2023-05-27 13:31 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-05-27 13:31 [PATCH net-next v2 0/4] netlink: specs: add ynl spec for ovs_flow Donald Hunter
2023-05-27 13:31 ` [PATCH net-next v2 1/4] doc: ynl: Add doc attr to struct members in genetlink-legacy spec Donald Hunter
2023-05-27 13:31 ` [PATCH net-next v2 2/4] tools: ynl: Initialise fixed headers to 0 in genetlink-legacy Donald Hunter
2023-05-27 13:31 ` [PATCH net-next v2 3/4] tools: ynl: Support enums in struct members " Donald Hunter
2023-05-27 13:31 ` Donald Hunter [this message]
2023-05-30  5:10 ` [PATCH net-next v2 0/4] netlink: specs: add ynl spec for ovs_flow patchwork-bot+netdevbpf

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230527133107.68161-5-donald.hunter@gmail.com \
    --to=donald.hunter@gmail.com \
    --cc=davem@davemloft.net \
    --cc=donald.hunter@redhat.com \
    --cc=edumazet@google.com \
    --cc=kuba@kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).