netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Cc: linux-sh@vger.kernel.org, Magnus Damm <magnus.damm@gmail.com>,
	Simon Horman <horms@verge.net.au>,
	Steve Glendinning <steve.glendinning@shawell.net>,
	netdev@vger.kernel.org,
	Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com>,
	devicetree@vger.kernel.org
Subject: Re: [PATCH 2/4] net: smsc911x: add a reset GPIO DT binding
Date: Wed, 24 Jul 2013 00:10:54 +0200	[thread overview]
Message-ID: <2304961.J6VD8c1oK4@avalon> (raw)
In-Reply-To: <1374595924-12338-3-git-send-email-g.liakhovetski@gmx.de>

Hi Guennadi,

Thanks for the patch.

On Tuesday 23 July 2013 18:12:02 Guennadi Liakhovetski wrote:
> Add a new DT property to specify a reset GPIO.
> 
> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com>
> Cc: devicetree@vger.kernel.org
> ---
>  Documentation/devicetree/bindings/net/smsc911x.txt |    1 +
>  drivers/net/ethernet/smsc/smsc911x.c               |   11 +++++++++++
>  2 files changed, 12 insertions(+), 0 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/net/smsc911x.txt
> b/Documentation/devicetree/bindings/net/smsc911x.txt index adb5b57..2bf32be
> 100644
> --- a/Documentation/devicetree/bindings/net/smsc911x.txt
> +++ b/Documentation/devicetree/bindings/net/smsc911x.txt
> @@ -23,6 +23,7 @@ Optional properties:
>    external PHY
>  - smsc,save-mac-address : Indicates that mac address needs to be saved
>    before resetting the controller
> +- smsc,reset-gpios : a GPIO binding to take the controller out of reset

Albeit defined in the smsc911x bindings, this property doesn't seem very 
device-specific. I wonder whether it would make sense to drop the "smsc," 
prefix.

>  - local-mac-address : 6 bytes, mac address
> 
>  Examples:
> diff --git a/drivers/net/ethernet/smsc/smsc911x.c
> b/drivers/net/ethernet/smsc/smsc911x.c index ca01c03..db6255e 100644
> --- a/drivers/net/ethernet/smsc/smsc911x.c
> +++ b/drivers/net/ethernet/smsc/smsc911x.c
> @@ -2328,6 +2328,8 @@ static int smsc911x_probe_config_dt(struct
> smsc911x_platform_config *config, {
>  	const char *mac;
>  	u32 width = 0;
> +	enum of_gpio_flags flags;
> +	int gpio;
> 
>  	if (!np)
>  		return -ENODEV;
> @@ -2361,6 +2363,15 @@ static int smsc911x_probe_config_dt(struct
> smsc911x_platform_config *config, if (of_get_property(np,
> "smsc,save-mac-address", NULL))
>  		config->flags |= SMSC911X_SAVE_MAC_ADDRESS;
> 
> +	gpio = of_get_named_gpio_flags(np, "smsc,reset-gpios", 0, &flags);
> +	if (gpio == -EPROBE_DEFER)
> +		return gpio;
> +	if (gpio_is_valid(gpio)) {
> +		config->reset_gpio = gpio;
> +		config->reset_gpio_config = SMSC911X_RESET_GPIO_VALID |
> +			(flags & OF_GPIO_ACTIVE_LOW ? GPIOF_INIT_LOW : GPIOF_INIT_HIGH);
> +	}
> +
>  	return 0;
>  }
>  #else
-- 
Regards,

Laurent Pinchart


  reply	other threads:[~2013-07-23 22:10 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-07-23 16:12 [PATCH 0/4] net: smsc911x: support reset GPIO and use it on ape6evm Guennadi Liakhovetski
2013-07-23 16:12 ` [PATCH 1/4] net: smsc911x: add support for a reset GPIO Guennadi Liakhovetski
2013-07-23 16:38   ` Fabio Estevam
2013-07-23 16:44     ` Guennadi Liakhovetski
2013-07-23 17:36   ` Sergei Shtylyov
2013-07-23 16:12 ` [PATCH 2/4] net: smsc911x: add a reset GPIO DT binding Guennadi Liakhovetski
2013-07-23 22:10   ` Laurent Pinchart [this message]
2013-07-23 22:18   ` Sascha Hauer
2013-07-23 16:12 ` [PATCH 3/4] ARM: shmobile: ape6evm: use smsc911x platform parameters to handle eth reset Guennadi Liakhovetski
2013-07-23 16:12 ` [PATCH 4/4] ARM: shmobile: ape6evm-reference: add smsc911x ethernet support Guennadi Liakhovetski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=2304961.J6VD8c1oK4@avalon \
    --to=laurent.pinchart@ideasonboard.com \
    --cc=devicetree@vger.kernel.org \
    --cc=g.liakhovetski+renesas@gmail.com \
    --cc=g.liakhovetski@gmx.de \
    --cc=horms@verge.net.au \
    --cc=linux-sh@vger.kernel.org \
    --cc=magnus.damm@gmail.com \
    --cc=netdev@vger.kernel.org \
    --cc=steve.glendinning@shawell.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).