From: Rojhalat Ibrahim <imr@rtschenk.de>
To: "linux-gpio@vger.kernel.org" <linux-gpio@vger.kernel.org>
Cc: Alexandre Courbot <gnurou@gmail.com>,
Alexandre Courbot <acourbot@nvidia.com>,
Linus Walleij <linus.walleij@linaro.org>,
David Miller <davem@davemloft.net>,
netdev@vger.kernel.org
Subject: [PATCH v3 4/4] mdio-mux-gpio: use new gpiod_get_array and gpiod_put_array functions
Date: Mon, 09 Feb 2015 18:07:18 +0100 [thread overview]
Message-ID: <2799887.8ZynysBVJj@pcimr> (raw)
Use the new gpiod_get_array and gpiod_put_array functions for obtaining and
disposing of GPIO descriptors.
Cc: David Miller <davem@davemloft.net>
Signed-off-by: Rojhalat Ibrahim <imr@rtschenk.de>
---
Change log:
v3: no change
v2: use the new interface
drivers/net/phy/mdio-mux-gpio.c | 61 ++++++++++++-----------------------------
1 file changed, 18 insertions(+), 43 deletions(-)
diff --git a/drivers/net/phy/mdio-mux-gpio.c b/drivers/net/phy/mdio-mux-gpio.c
index 320eb15..3f6929c 100644
--- a/drivers/net/phy/mdio-mux-gpio.c
+++ b/drivers/net/phy/mdio-mux-gpio.c
@@ -12,33 +12,31 @@
#include <linux/module.h>
#include <linux/phy.h>
#include <linux/mdio-mux.h>
-#include <linux/of_gpio.h>
+#include <linux/gpio/consumer.h>
#define DRV_VERSION "1.1"
#define DRV_DESCRIPTION "GPIO controlled MDIO bus multiplexer driver"
-#define MDIO_MUX_GPIO_MAX_BITS 8
-
struct mdio_mux_gpio_state {
- struct gpio_desc *gpio[MDIO_MUX_GPIO_MAX_BITS];
- unsigned int num_gpios;
+ struct gpio_descs *gpios;
void *mux_handle;
};
static int mdio_mux_gpio_switch_fn(int current_child, int desired_child,
void *data)
{
- int values[MDIO_MUX_GPIO_MAX_BITS];
- unsigned int n;
struct mdio_mux_gpio_state *s = data;
+ int values[s->gpios->array_size];
+ unsigned int n;
if (current_child == desired_child)
return 0;
- for (n = 0; n < s->num_gpios; n++) {
+ for (n = 0; n < s->gpios->array_size; n++)
values[n] = (desired_child >> n) & 1;
- }
- gpiod_set_array_cansleep(s->num_gpios, s->gpio, values);
+
+ gpiod_set_array_cansleep(s->gpios->array_size, s->gpios->desc_array,
+ values);
return 0;
}
@@ -46,56 +44,33 @@ static int mdio_mux_gpio_switch_fn(int current_child, int desired_child,
static int mdio_mux_gpio_probe(struct platform_device *pdev)
{
struct mdio_mux_gpio_state *s;
- int num_gpios;
- unsigned int n;
int r;
- if (!pdev->dev.of_node)
- return -ENODEV;
-
- num_gpios = of_gpio_count(pdev->dev.of_node);
- if (num_gpios <= 0 || num_gpios > MDIO_MUX_GPIO_MAX_BITS)
- return -ENODEV;
-
s = devm_kzalloc(&pdev->dev, sizeof(*s), GFP_KERNEL);
if (!s)
return -ENOMEM;
- s->num_gpios = num_gpios;
-
- for (n = 0; n < num_gpios; ) {
- struct gpio_desc *gpio = gpiod_get_index(&pdev->dev, NULL, n,
- GPIOD_OUT_LOW);
- if (IS_ERR(gpio)) {
- r = PTR_ERR(gpio);
- goto err;
- }
- s->gpio[n] = gpio;
- n++;
- }
+ s->gpios = gpiod_get_array(&pdev->dev, NULL, GPIOD_OUT_LOW);
+ if (IS_ERR(s->gpios))
+ return PTR_ERR(s->gpios);
r = mdio_mux_init(&pdev->dev,
mdio_mux_gpio_switch_fn, &s->mux_handle, s);
- if (r == 0) {
- pdev->dev.platform_data = s;
- return 0;
- }
-err:
- while (n) {
- n--;
- gpiod_put(s->gpio[n]);
+ if (r != 0) {
+ gpiod_put_array(s->gpios);
+ return r;
}
- return r;
+
+ pdev->dev.platform_data = s;
+ return 0;
}
static int mdio_mux_gpio_remove(struct platform_device *pdev)
{
- unsigned int n;
struct mdio_mux_gpio_state *s = dev_get_platdata(&pdev->dev);
mdio_mux_uninit(s->mux_handle);
- for (n = 0; n < s->num_gpios; n++)
- gpiod_put(s->gpio[n]);
+ gpiod_put_array(s->gpios);
return 0;
}
--
2.0.5
next reply other threads:[~2015-02-09 17:07 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-02-09 17:07 Rojhalat Ibrahim [this message]
2015-02-10 6:22 ` [PATCH v3 4/4] mdio-mux-gpio: use new gpiod_get_array and gpiod_put_array functions Alexandre Courbot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2799887.8ZynysBVJj@pcimr \
--to=imr@rtschenk.de \
--cc=acourbot@nvidia.com \
--cc=davem@davemloft.net \
--cc=gnurou@gmail.com \
--cc=linus.walleij@linaro.org \
--cc=linux-gpio@vger.kernel.org \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).