netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH 1/4] [net-next] wan: remove stale Kconfig entries
@ 2019-12-09 15:12 Arnd Bergmann
  2019-12-09 15:12 ` [PATCH 2/4] [net-next] wan: remove sbni/granch driver Arnd Bergmann
                   ` (2 more replies)
  0 siblings, 3 replies; 12+ messages in thread
From: Arnd Bergmann @ 2019-12-09 15:12 UTC (permalink / raw)
  To: David S. Miller, Krzysztof Halasa
  Cc: Greg Kroah-Hartman, devel, netdev, Arnd Bergmann, linux-kernel

The dscc4 driver was recently removed, but these
Kconfig entries remain, so remove them as well.

Fixes: 28c9eb9042a9 ("net/wan: dscc4: remove broken dscc4 driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
 drivers/net/wan/Kconfig | 24 ------------------------
 1 file changed, 24 deletions(-)

diff --git a/drivers/net/wan/Kconfig b/drivers/net/wan/Kconfig
index bf2fe1d602ea..59b25d7e13e8 100644
--- a/drivers/net/wan/Kconfig
+++ b/drivers/net/wan/Kconfig
@@ -289,30 +289,6 @@ config SLIC_DS26522
 	  To compile this driver as a module, choose M here: the
 	  module will be called slic_ds26522.
 
-config DSCC4_PCISYNC
-	bool "Etinc PCISYNC features"
-	depends on DSCC4
-	help
-	  Due to Etinc's design choice for its PCISYNC cards, some operations
-	  are only allowed on specific ports of the DSCC4. This option is the
-	  only way for the driver to know that it shouldn't return a success
-	  code for these operations.
-
-	  Please say Y if your card is an Etinc's PCISYNC.
-
-config DSCC4_PCI_RST
-	bool "Hard reset support"
-	depends on DSCC4
-	help
-	  Various DSCC4 bugs forbid any reliable software reset of the ASIC.
-	  As a replacement, some vendors provide a way to assert the PCI #RST
-	  pin of DSCC4 through the GPIO port of the card. If you choose Y,
-	  the driver will make use of this feature before module removal
-	  (i.e. rmmod). The feature is known to be available on Commtech's
-	  cards. Contact your manufacturer for details.
-
-	  Say Y if your card supports this feature.
-
 config IXP4XX_HSS
 	tristate "Intel IXP4xx HSS (synchronous serial port) support"
 	depends on HDLC && IXP4XX_NPE && IXP4XX_QMGR
-- 
2.20.0


^ permalink raw reply	[flat|nested] 12+ messages in thread

* [PATCH 2/4] [net-next] wan: remove sbni/granch driver
  2019-12-09 15:12 [PATCH 1/4] [net-next] wan: remove stale Kconfig entries Arnd Bergmann
@ 2019-12-09 15:12 ` Arnd Bergmann
  2019-12-09 15:12 ` [PATCH 3/4] [net-next] wan: remove old frame relay driver Arnd Bergmann
  2019-12-09 15:12 ` [PATCH 4/4] [RFC] staging/net: move AF_X25 into drivers/staging Arnd Bergmann
  2 siblings, 0 replies; 12+ messages in thread
From: Arnd Bergmann @ 2019-12-09 15:12 UTC (permalink / raw)
  To: David S. Miller, Krzysztof Halasa
  Cc: Greg Kroah-Hartman, devel, netdev, Arnd Bergmann, linux-kernel

The driver was merged in 1999 and has only ever seen treewide cleanups
since then, with no indication whatsoever that anyone has actually
had access to hardware for testing the patches.

From the information in the link below, it appears that the hardware
is for some leased line system in Russia that has since been
discontinued.

As the driver still feels like a Linux-2.2 era artifact today, it
appears that the best way forward is to just delete it.

Link: https://www.tms.ru/%D0%90%D0%B4%D0%B0%D0%BF%D1%82%D0%B5%D1%80_%D0%B4%D0%BB%D1%8F_%D0%B2%D1%8B%D0%B4%D0%B5%D0%BB%D0%B5%D0%BD%D0%BD%D1%8B%D1%85_%D0%BB%D0%B8%D0%BD%D0%B8%D0%B9_Granch_SBNI12-10
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
 .../admin-guide/kernel-parameters.txt         |    2 -
 drivers/net/Space.c                           |    4 -
 drivers/net/wan/Kconfig                       |   28 -
 drivers/net/wan/Makefile                      |    1 -
 drivers/net/wan/sbni.c                        | 1623 -----------------
 drivers/net/wan/sbni.h                        |  147 --
 include/net/Space.h                           |    3 -
 7 files changed, 1808 deletions(-)
 delete mode 100644 drivers/net/wan/sbni.c
 delete mode 100644 drivers/net/wan/sbni.h

diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index a84a83f8881e..2161e4f93e17 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -4264,8 +4264,6 @@
 	sa1100ir	[NET]
 			See drivers/net/irda/sa1100_ir.c.
 
-	sbni=		[NET] Granch SBNI12 leased line adapter
-
 	sched_debug	[KNL] Enables verbose scheduler debug messages.
 
 	schedstats=	[KNL,X86] Enable or disable scheduled statistics.
diff --git a/drivers/net/Space.c b/drivers/net/Space.c
index 890c86e11bcc..7bb699d7c422 100644
--- a/drivers/net/Space.c
+++ b/drivers/net/Space.c
@@ -133,10 +133,6 @@ static int __init net_olddevs_init(void)
 {
 	int num;
 
-#ifdef CONFIG_SBNI
-	for (num = 0; num < 8; ++num)
-		sbni_probe(num);
-#endif
 	for (num = 0; num < 8; ++num)
 		ethif_probe2(num);
 
diff --git a/drivers/net/wan/Kconfig b/drivers/net/wan/Kconfig
index 59b25d7e13e8..e9ad63115144 100644
--- a/drivers/net/wan/Kconfig
+++ b/drivers/net/wan/Kconfig
@@ -374,32 +374,4 @@ config X25_ASY
 
 	  If unsure, say N.
 
-config SBNI
-	tristate "Granch SBNI12 Leased Line adapter support"
-	depends on X86
-	---help---
-	  Driver for ISA SBNI12-xx cards which are low cost alternatives to
-	  leased line modems.
-
-	  You can find more information and last versions of drivers and
-	  utilities at <http://www.granch.ru/>. If you have any question you
-	  can send email to <sbni@granch.ru>.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called sbni.
-
-	  If unsure, say N.
-
-config SBNI_MULTILINE
-	bool "Multiple line feature support"
-	depends on SBNI
-	help
-	  Schedule traffic for some parallel lines, via SBNI12 adapters.
-
-	  If you have two computers connected with two parallel lines it's
-	  possible to increase transfer rate nearly twice. You should have
-	  a program named 'sbniconfig' to configure adapters.
-
-	  If unsure, say N.
-
 endif # WAN
diff --git a/drivers/net/wan/Makefile b/drivers/net/wan/Makefile
index 701f5d2fe3b6..3059b9a279b3 100644
--- a/drivers/net/wan/Makefile
+++ b/drivers/net/wan/Makefile
@@ -25,7 +25,6 @@ obj-$(CONFIG_LANMEDIA)		+= lmc/
 obj-$(CONFIG_DLCI)		+= dlci.o 
 obj-$(CONFIG_SDLA)		+= sdla.o
 obj-$(CONFIG_LAPBETHER)		+= lapbether.o
-obj-$(CONFIG_SBNI)		+= sbni.o
 obj-$(CONFIG_N2)		+= n2.o
 obj-$(CONFIG_C101)		+= c101.o
 obj-$(CONFIG_WANXL)		+= wanxl.o
diff --git a/drivers/net/wan/sbni.c b/drivers/net/wan/sbni.c
deleted file mode 100644
index 40c04ea1200a..000000000000
--- a/drivers/net/wan/sbni.c
+++ /dev/null
@@ -1,1623 +0,0 @@
-/* sbni.c:  Granch SBNI12 leased line adapters driver for linux
- *
- *	Written 2001 by Denis I.Timofeev (timofeev@granch.ru)
- *
- *	Previous versions were written by Yaroslav Polyakov,
- *	Alexey Zverev and Max Khon.
- *
- *	Driver supports SBNI12-02,-04,-05,-10,-11 cards, single and
- *	double-channel, PCI and ISA modifications.
- *	More info and useful utilities to work with SBNI12 cards you can find
- *	at http://www.granch.com (English) or http://www.granch.ru (Russian)
- *
- *	This software may be used and distributed according to the terms
- *	of the GNU General Public License.
- *
- *
- *  5.0.1	Jun 22 2001
- *	  - Fixed bug in probe
- *  5.0.0	Jun 06 2001
- *	  - Driver was completely redesigned by Denis I.Timofeev,
- *	  - now PCI/Dual, ISA/Dual (with single interrupt line) models are
- *	  - supported
- *  3.3.0	Thu Feb 24 21:30:28 NOVT 2000 
- *        - PCI cards support
- *  3.2.0	Mon Dec 13 22:26:53 NOVT 1999
- * 	  - Completely rebuilt all the packet storage system
- * 	  -    to work in Ethernet-like style.
- *  3.1.1	just fixed some bugs (5 aug 1999)
- *  3.1.0	added balancing feature	(26 apr 1999)
- *  3.0.1	just fixed some bugs (14 apr 1999).
- *  3.0.0	Initial Revision, Yaroslav Polyakov (24 Feb 1999)
- *        - added pre-calculation for CRC, fixed bug with "len-2" frames, 
- *        - removed outbound fragmentation (MTU=1000), written CRC-calculation 
- *        - on asm, added work with hard_headers and now we have our own cache 
- *        - for them, optionally supported word-interchange on some chipsets,
- * 
- *	Known problem: this driver wasn't tested on multiprocessor machine.
- */
-
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/ptrace.h>
-#include <linux/fcntl.h>
-#include <linux/ioport.h>
-#include <linux/interrupt.h>
-#include <linux/string.h>
-#include <linux/errno.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/pci.h>
-#include <linux/skbuff.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-
-#include <net/net_namespace.h>
-#include <net/arp.h>
-#include <net/Space.h>
-
-#include <asm/io.h>
-#include <asm/types.h>
-#include <asm/byteorder.h>
-#include <asm/irq.h>
-#include <linux/uaccess.h>
-
-#include "sbni.h"
-
-/* device private data */
-
-struct net_local {
-	struct timer_list	watchdog;
-	struct net_device	*watchdog_dev;
-
-	spinlock_t	lock;
-	struct sk_buff  *rx_buf_p;		/* receive buffer ptr */
-	struct sk_buff  *tx_buf_p;		/* transmit buffer ptr */
-	
-	unsigned int	framelen;		/* current frame length */
-	unsigned int	maxframe;		/* maximum valid frame length */
-	unsigned int	state;
-	unsigned int	inppos, outpos;		/* positions in rx/tx buffers */
-
-	/* transmitting frame number - from frames qty to 1 */
-	unsigned int	tx_frameno;
-
-	/* expected number of next receiving frame */
-	unsigned int	wait_frameno;
-
-	/* count of failed attempts to frame send - 32 attempts do before
-	   error - while receiver tunes on opposite side of wire */
-	unsigned int	trans_errors;
-
-	/* idle time; send pong when limit exceeded */
-	unsigned int	timer_ticks;
-
-	/* fields used for receive level autoselection */
-	int	delta_rxl;
-	unsigned int	cur_rxl_index, timeout_rxl;
-	unsigned long	cur_rxl_rcvd, prev_rxl_rcvd;
-
-	struct sbni_csr1	csr1;		/* current value of CSR1 */
-	struct sbni_in_stats	in_stats; 	/* internal statistics */ 
-
-	struct net_device		*second;	/* for ISA/dual cards */
-
-#ifdef CONFIG_SBNI_MULTILINE
-	struct net_device		*master;
-	struct net_device		*link;
-#endif
-};
-
-
-static int  sbni_card_probe( unsigned long );
-static int  sbni_pci_probe( struct net_device  * );
-static struct net_device  *sbni_probe1(struct net_device *, unsigned long, int);
-static int  sbni_open( struct net_device * );
-static int  sbni_close( struct net_device * );
-static netdev_tx_t sbni_start_xmit(struct sk_buff *,
-					 struct net_device * );
-static int  sbni_ioctl( struct net_device *, struct ifreq *, int );
-static void  set_multicast_list( struct net_device * );
-
-static irqreturn_t sbni_interrupt( int, void * );
-static void  handle_channel( struct net_device * );
-static int   recv_frame( struct net_device * );
-static void  send_frame( struct net_device * );
-static int   upload_data( struct net_device *,
-			  unsigned, unsigned, unsigned, u32 );
-static void  download_data( struct net_device *, u32 * );
-static void  sbni_watchdog(struct timer_list *);
-static void  interpret_ack( struct net_device *, unsigned );
-static int   append_frame_to_pkt( struct net_device *, unsigned, u32 );
-static void  indicate_pkt( struct net_device * );
-static void  card_start( struct net_device * );
-static void  prepare_to_send( struct sk_buff *, struct net_device * );
-static void  drop_xmit_queue( struct net_device * );
-static void  send_frame_header( struct net_device *, u32 * );
-static int   skip_tail( unsigned int, unsigned int, u32 );
-static int   check_fhdr( u32, u32 *, u32 *, u32 *, u32 *, u32 * );
-static void  change_level( struct net_device * );
-static void  timeout_change_level( struct net_device * );
-static u32   calc_crc32( u32, u8 *, u32 );
-static struct sk_buff *  get_rx_buf( struct net_device * );
-static int  sbni_init( struct net_device * );
-
-#ifdef CONFIG_SBNI_MULTILINE
-static int  enslave( struct net_device *, struct net_device * );
-static int  emancipate( struct net_device * );
-#endif
-
-static const char  version[] =
-	"Granch SBNI12 driver ver 5.0.1  Jun 22 2001  Denis I.Timofeev.\n";
-
-static bool skip_pci_probe	__initdata = false;
-static int  scandone	__initdata = 0;
-static int  num		__initdata = 0;
-
-static unsigned char  rxl_tab[];
-static u32  crc32tab[];
-
-/* A list of all installed devices, for removing the driver module. */
-static struct net_device  *sbni_cards[ SBNI_MAX_NUM_CARDS ];
-
-/* Lists of device's parameters */
-static u32	io[   SBNI_MAX_NUM_CARDS ] __initdata =
-	{ [0 ... SBNI_MAX_NUM_CARDS-1] = -1 };
-static u32	irq[  SBNI_MAX_NUM_CARDS ] __initdata;
-static u32	baud[ SBNI_MAX_NUM_CARDS ] __initdata;
-static u32	rxl[  SBNI_MAX_NUM_CARDS ] __initdata =
-	{ [0 ... SBNI_MAX_NUM_CARDS-1] = -1 };
-static u32	mac[  SBNI_MAX_NUM_CARDS ] __initdata;
-
-#ifndef MODULE
-typedef u32  iarr[];
-static iarr *dest[5] __initdata = { &io, &irq, &baud, &rxl, &mac };
-#endif
-
-/* A zero-terminated list of I/O addresses to be probed on ISA bus */
-static unsigned int  netcard_portlist[ ] __initdata = { 
-	0x210, 0x214, 0x220, 0x224, 0x230, 0x234, 0x240, 0x244, 0x250, 0x254,
-	0x260, 0x264, 0x270, 0x274, 0x280, 0x284, 0x290, 0x294, 0x2a0, 0x2a4,
-	0x2b0, 0x2b4, 0x2c0, 0x2c4, 0x2d0, 0x2d4, 0x2e0, 0x2e4, 0x2f0, 0x2f4,
-	0 };
-
-#define NET_LOCAL_LOCK(dev) (((struct net_local *)netdev_priv(dev))->lock)
-
-/*
- * Look for SBNI card which addr stored in dev->base_addr, if nonzero.
- * Otherwise, look through PCI bus. If none PCI-card was found, scan ISA.
- */
-
-static inline int __init
-sbni_isa_probe( struct net_device  *dev )
-{
-	if( dev->base_addr > 0x1ff &&
-	    request_region( dev->base_addr, SBNI_IO_EXTENT, dev->name ) &&
-	    sbni_probe1( dev, dev->base_addr, dev->irq ) )
-
-		return  0;
-	else {
-		pr_err("base address 0x%lx is busy, or adapter is malfunctional!\n",
-		       dev->base_addr);
-		return  -ENODEV;
-	}
-}
-
-static const struct net_device_ops sbni_netdev_ops = {
-	.ndo_open		= sbni_open,
-	.ndo_stop		= sbni_close,
-	.ndo_start_xmit		= sbni_start_xmit,
-	.ndo_set_rx_mode	= set_multicast_list,
-	.ndo_do_ioctl		= sbni_ioctl,
-	.ndo_set_mac_address 	= eth_mac_addr,
-	.ndo_validate_addr	= eth_validate_addr,
-};
-
-static void __init sbni_devsetup(struct net_device *dev)
-{
-	ether_setup( dev );
-	dev->netdev_ops = &sbni_netdev_ops;
-}
-
-int __init sbni_probe(int unit)
-{
-	struct net_device *dev;
-	int err;
-
-	dev = alloc_netdev(sizeof(struct net_local), "sbni",
-			   NET_NAME_UNKNOWN, sbni_devsetup);
-	if (!dev)
-		return -ENOMEM;
-
-	dev->netdev_ops = &sbni_netdev_ops;
-
-	sprintf(dev->name, "sbni%d", unit);
-	netdev_boot_setup_check(dev);
-
-	err = sbni_init(dev);
-	if (err) {
-		free_netdev(dev);
-		return err;
-	}
-
-	err = register_netdev(dev);
-	if (err) {
-		release_region( dev->base_addr, SBNI_IO_EXTENT );
-		free_netdev(dev);
-		return err;
-	}
-	pr_info_once("%s", version);
-	return 0;
-}
-
-static int __init sbni_init(struct net_device *dev)
-{
-	int  i;
-	if( dev->base_addr )
-		return  sbni_isa_probe( dev );
-	/* otherwise we have to perform search our adapter */
-
-	if( io[ num ] != -1 )
-		dev->base_addr	= io[ num ],
-		dev->irq	= irq[ num ];
-	else if( scandone  ||  io[ 0 ] != -1 )
-		return  -ENODEV;
-
-	/* if io[ num ] contains non-zero address, then that is on ISA bus */
-	if( dev->base_addr )
-		return  sbni_isa_probe( dev );
-
-	/* ...otherwise - scan PCI first */
-	if( !skip_pci_probe  &&  !sbni_pci_probe( dev ) )
-		return  0;
-
-	if( io[ num ] == -1 ) {
-		/* Auto-scan will be stopped when first ISA card were found */
-		scandone = 1;
-		if( num > 0 )
-			return  -ENODEV;
-	}
-
-	for( i = 0;  netcard_portlist[ i ];  ++i ) {
-		int  ioaddr = netcard_portlist[ i ];
-		if( request_region( ioaddr, SBNI_IO_EXTENT, dev->name ) &&
-		    sbni_probe1( dev, ioaddr, 0 ))
-			return 0;
-	}
-
-	return  -ENODEV;
-}
-
-
-static int __init
-sbni_pci_probe( struct net_device  *dev )
-{
-	struct pci_dev  *pdev = NULL;
-
-	while( (pdev = pci_get_class( PCI_CLASS_NETWORK_OTHER << 8, pdev ))
-	       != NULL ) {
-		int  pci_irq_line;
-		unsigned long  pci_ioaddr;
-
-		if( pdev->vendor != SBNI_PCI_VENDOR &&
-		    pdev->device != SBNI_PCI_DEVICE )
-			continue;
-
-		pci_ioaddr = pci_resource_start( pdev, 0 );
-		pci_irq_line = pdev->irq;
-
-		/* Avoid already found cards from previous calls */
-		if( !request_region( pci_ioaddr, SBNI_IO_EXTENT, dev->name ) ) {
-			if (pdev->subsystem_device != 2)
-				continue;
-
-			/* Dual adapter is present */
-			if (!request_region(pci_ioaddr += 4, SBNI_IO_EXTENT,
-							dev->name ) )
-				continue;
-		}
-
-		if (pci_irq_line <= 0 || pci_irq_line >= nr_irqs)
-			pr_warn(
-"WARNING: The PCI BIOS assigned this PCI card to IRQ %d, which is unlikely to work!.\n"
-"You should use the PCI BIOS setup to assign a valid IRQ line.\n",
-				pci_irq_line );
-
-		/* avoiding re-enable dual adapters */
-		if( (pci_ioaddr & 7) == 0  &&  pci_enable_device( pdev ) ) {
-			release_region( pci_ioaddr, SBNI_IO_EXTENT );
-			pci_dev_put( pdev );
-			return  -EIO;
-		}
-		if( sbni_probe1( dev, pci_ioaddr, pci_irq_line ) ) {
-			SET_NETDEV_DEV(dev, &pdev->dev);
-			/* not the best thing to do, but this is all messed up 
-			   for hotplug systems anyway... */
-			pci_dev_put( pdev );
-			return  0;
-		}
-	}
-	return  -ENODEV;
-}
-
-
-static struct net_device * __init
-sbni_probe1( struct net_device  *dev,  unsigned long  ioaddr,  int  irq )
-{
-	struct net_local  *nl;
-
-	if( sbni_card_probe( ioaddr ) ) {
-		release_region( ioaddr, SBNI_IO_EXTENT );
-		return NULL;
-	}
-
-	outb( 0, ioaddr + CSR0 );
-
-	if( irq < 2 ) {
-		unsigned long irq_mask;
-
-		irq_mask = probe_irq_on();
-		outb( EN_INT | TR_REQ, ioaddr + CSR0 );
-		outb( PR_RES, ioaddr + CSR1 );
-		mdelay(50);
-		irq = probe_irq_off(irq_mask);
-		outb( 0, ioaddr + CSR0 );
-
-		if( !irq ) {
-			pr_err("%s: can't detect device irq!\n", dev->name);
-			release_region( ioaddr, SBNI_IO_EXTENT );
-			return NULL;
-		}
-	} else if( irq == 2 )
-		irq = 9;
-
-	dev->irq = irq;
-	dev->base_addr = ioaddr;
-
-	/* Fill in sbni-specific dev fields. */
-	nl = netdev_priv(dev);
-	if( !nl ) {
-		pr_err("%s: unable to get memory!\n", dev->name);
-		release_region( ioaddr, SBNI_IO_EXTENT );
-		return NULL;
-	}
-
-	memset( nl, 0, sizeof(struct net_local) );
-	spin_lock_init( &nl->lock );
-
-	/* store MAC address (generate if that isn't known) */
-	*(__be16 *)dev->dev_addr = htons( 0x00ff );
-	*(__be32 *)(dev->dev_addr + 2) = htonl( 0x01000000 |
-		((mac[num] ?
-		mac[num] :
-		(u32)((long)netdev_priv(dev))) & 0x00ffffff));
-
-	/* store link settings (speed, receive level ) */
-	nl->maxframe  = DEFAULT_FRAME_LEN;
-	nl->csr1.rate = baud[ num ];
-
-	if( (nl->cur_rxl_index = rxl[ num ]) == -1 )
-		/* autotune rxl */
-		nl->cur_rxl_index = DEF_RXL,
-		nl->delta_rxl = DEF_RXL_DELTA;
-	else
-		nl->delta_rxl = 0;
-	nl->csr1.rxl  = rxl_tab[ nl->cur_rxl_index ];
-	if( inb( ioaddr + CSR0 ) & 0x01 )
-		nl->state |= FL_SLOW_MODE;
-
-	pr_notice("%s: ioaddr %#lx, irq %d, MAC: 00:ff:01:%02x:%02x:%02x\n",
-		  dev->name, dev->base_addr, dev->irq,
-		  ((u8 *)dev->dev_addr)[3],
-		  ((u8 *)dev->dev_addr)[4],
-		  ((u8 *)dev->dev_addr)[5]);
-
-	pr_notice("%s: speed %d",
-		  dev->name,
-		  ((nl->state & FL_SLOW_MODE) ? 500000 : 2000000)
-		  / (1 << nl->csr1.rate));
-
-	if( nl->delta_rxl == 0 )
-		pr_cont(", receive level 0x%x (fixed)\n", nl->cur_rxl_index);
-	else
-		pr_cont(", receive level (auto)\n");
-
-#ifdef CONFIG_SBNI_MULTILINE
-	nl->master = dev;
-	nl->link   = NULL;
-#endif
-   
-	sbni_cards[ num++ ] = dev;
-	return  dev;
-}
-
-/* -------------------------------------------------------------------------- */
-
-#ifdef CONFIG_SBNI_MULTILINE
-
-static netdev_tx_t
-sbni_start_xmit( struct sk_buff  *skb,  struct net_device  *dev )
-{
-	struct net_device  *p;
-
-	netif_stop_queue( dev );
-
-	/* Looking for idle device in the list */
-	for( p = dev;  p; ) {
-		struct net_local  *nl = netdev_priv(p);
-		spin_lock( &nl->lock );
-		if( nl->tx_buf_p  ||  (nl->state & FL_LINE_DOWN) ) {
-			p = nl->link;
-			spin_unlock( &nl->lock );
-		} else {
-			/* Idle dev is found */
-			prepare_to_send( skb, p );
-			spin_unlock( &nl->lock );
-			netif_start_queue( dev );
-			return NETDEV_TX_OK;
-		}
-	}
-
-	return NETDEV_TX_BUSY;
-}
-
-#else	/* CONFIG_SBNI_MULTILINE */
-
-static netdev_tx_t
-sbni_start_xmit( struct sk_buff  *skb,  struct net_device  *dev )
-{
-	struct net_local  *nl  = netdev_priv(dev);
-
-	netif_stop_queue( dev );
-	spin_lock( &nl->lock );
-
-	prepare_to_send( skb, dev );
-
-	spin_unlock( &nl->lock );
-	return NETDEV_TX_OK;
-}
-
-#endif	/* CONFIG_SBNI_MULTILINE */
-
-/* -------------------------------------------------------------------------- */
-
-/* interrupt handler */
-
-/*
- * 	SBNI12D-10, -11/ISA boards within "common interrupt" mode could not
- * be looked as two independent single-channel devices. Every channel seems
- * as Ethernet interface but interrupt handler must be common. Really, first
- * channel ("master") driver only registers the handler. In its struct net_local
- * it has got pointer to "slave" channel's struct net_local and handles that's
- * interrupts too.
- *	dev of successfully attached ISA SBNI boards is linked to list.
- * While next board driver is initialized, it scans this list. If one
- * has found dev with same irq and ioaddr different by 4 then it assumes
- * this board to be "master".
- */ 
-
-static irqreturn_t
-sbni_interrupt( int  irq,  void  *dev_id )
-{
-	struct net_device	  *dev = dev_id;
-	struct net_local  *nl  = netdev_priv(dev);
-	int	repeat;
-
-	spin_lock( &nl->lock );
-	if( nl->second )
-		spin_lock(&NET_LOCAL_LOCK(nl->second));
-
-	do {
-		repeat = 0;
-		if( inb( dev->base_addr + CSR0 ) & (RC_RDY | TR_RDY) )
-			handle_channel( dev ),
-			repeat = 1;
-		if( nl->second  && 	/* second channel present */
-		    (inb( nl->second->base_addr+CSR0 ) & (RC_RDY | TR_RDY)) )
-			handle_channel( nl->second ),
-			repeat = 1;
-	} while( repeat );
-
-	if( nl->second )
-		spin_unlock(&NET_LOCAL_LOCK(nl->second));
-	spin_unlock( &nl->lock );
-	return IRQ_HANDLED;
-}
-
-
-static void
-handle_channel( struct net_device  *dev )
-{
-	struct net_local	*nl    = netdev_priv(dev);
-	unsigned long		ioaddr = dev->base_addr;
-
-	int  req_ans;
-	unsigned char  csr0;
-
-#ifdef CONFIG_SBNI_MULTILINE
-	/* Lock the master device because we going to change its local data */
-	if( nl->state & FL_SLAVE )
-		spin_lock(&NET_LOCAL_LOCK(nl->master));
-#endif
-
-	outb( (inb( ioaddr + CSR0 ) & ~EN_INT) | TR_REQ, ioaddr + CSR0 );
-
-	nl->timer_ticks = CHANGE_LEVEL_START_TICKS;
-	for(;;) {
-		csr0 = inb( ioaddr + CSR0 );
-		if( ( csr0 & (RC_RDY | TR_RDY) ) == 0 )
-			break;
-
-		req_ans = !(nl->state & FL_PREV_OK);
-
-		if( csr0 & RC_RDY )
-			req_ans = recv_frame( dev );
-
-		/*
-		 * TR_RDY always equals 1 here because we have owned the marker,
-		 * and we set TR_REQ when disabled interrupts
-		 */
-		csr0 = inb( ioaddr + CSR0 );
-		if( !(csr0 & TR_RDY)  ||  (csr0 & RC_RDY) )
-			netdev_err(dev, "internal error!\n");
-
-		/* if state & FL_NEED_RESEND != 0 then tx_frameno != 0 */
-		if( req_ans  ||  nl->tx_frameno != 0 )
-			send_frame( dev );
-		else
-			/* send marker without any data */
-			outb( inb( ioaddr + CSR0 ) & ~TR_REQ, ioaddr + CSR0 );
-	}
-
-	outb( inb( ioaddr + CSR0 ) | EN_INT, ioaddr + CSR0 );
-
-#ifdef CONFIG_SBNI_MULTILINE
-	if( nl->state & FL_SLAVE )
-		spin_unlock(&NET_LOCAL_LOCK(nl->master));
-#endif
-}
-
-
-/*
- * Routine returns 1 if it needs to acknowledge received frame.
- * Empty frame received without errors won't be acknowledged.
- */
-
-static int
-recv_frame( struct net_device  *dev )
-{
-	struct net_local  *nl   = netdev_priv(dev);
-	unsigned long  ioaddr	= dev->base_addr;
-
-	u32  crc = CRC32_INITIAL;
-
-	unsigned  framelen = 0, frameno, ack;
-	unsigned  is_first, frame_ok = 0;
-
-	if( check_fhdr( ioaddr, &framelen, &frameno, &ack, &is_first, &crc ) ) {
-		frame_ok = framelen > 4
-			?  upload_data( dev, framelen, frameno, is_first, crc )
-			:  skip_tail( ioaddr, framelen, crc );
-		if( frame_ok )
-			interpret_ack( dev, ack );
-	}
-
-	outb( inb( ioaddr + CSR0 ) ^ CT_ZER, ioaddr + CSR0 );
-	if( frame_ok ) {
-		nl->state |= FL_PREV_OK;
-		if( framelen > 4 )
-			nl->in_stats.all_rx_number++;
-	} else
-		nl->state &= ~FL_PREV_OK,
-		change_level( dev ),
-		nl->in_stats.all_rx_number++,
-		nl->in_stats.bad_rx_number++;
-
-	return  !frame_ok  ||  framelen > 4;
-}
-
-
-static void
-send_frame( struct net_device  *dev )
-{
-	struct net_local  *nl    = netdev_priv(dev);
-
-	u32  crc = CRC32_INITIAL;
-
-	if( nl->state & FL_NEED_RESEND ) {
-
-		/* if frame was sended but not ACK'ed - resend it */
-		if( nl->trans_errors ) {
-			--nl->trans_errors;
-			if( nl->framelen != 0 )
-				nl->in_stats.resend_tx_number++;
-		} else {
-			/* cannot xmit with many attempts */
-#ifdef CONFIG_SBNI_MULTILINE
-			if( (nl->state & FL_SLAVE)  ||  nl->link )
-#endif
-			nl->state |= FL_LINE_DOWN;
-			drop_xmit_queue( dev );
-			goto  do_send;
-		}
-	} else
-		nl->trans_errors = TR_ERROR_COUNT;
-
-	send_frame_header( dev, &crc );
-	nl->state |= FL_NEED_RESEND;
-	/*
-	 * FL_NEED_RESEND will be cleared after ACK, but if empty
-	 * frame sended then in prepare_to_send next frame
-	 */
-
-
-	if( nl->framelen ) {
-		download_data( dev, &crc );
-		nl->in_stats.all_tx_number++;
-		nl->state |= FL_WAIT_ACK;
-	}
-
-	outsb( dev->base_addr + DAT, (u8 *)&crc, sizeof crc );
-
-do_send:
-	outb( inb( dev->base_addr + CSR0 ) & ~TR_REQ, dev->base_addr + CSR0 );
-
-	if( nl->tx_frameno )
-		/* next frame exists - we request card to send it */
-		outb( inb( dev->base_addr + CSR0 ) | TR_REQ,
-		      dev->base_addr + CSR0 );
-}
-
-
-/*
- * Write the frame data into adapter's buffer memory, and calculate CRC.
- * Do padding if necessary.
- */
-
-static void
-download_data( struct net_device  *dev,  u32  *crc_p )
-{
-	struct net_local  *nl    = netdev_priv(dev);
-	struct sk_buff    *skb	 = nl->tx_buf_p;
-
-	unsigned  len = min_t(unsigned int, skb->len - nl->outpos, nl->framelen);
-
-	outsb( dev->base_addr + DAT, skb->data + nl->outpos, len );
-	*crc_p = calc_crc32( *crc_p, skb->data + nl->outpos, len );
-
-	/* if packet too short we should write some more bytes to pad */
-	for( len = nl->framelen - len;  len--; )
-		outb( 0, dev->base_addr + DAT ),
-		*crc_p = CRC32( 0, *crc_p );
-}
-
-
-static int
-upload_data( struct net_device  *dev,  unsigned  framelen,  unsigned  frameno,
-	     unsigned  is_first,  u32  crc )
-{
-	struct net_local  *nl = netdev_priv(dev);
-
-	int  frame_ok;
-
-	if( is_first )
-		nl->wait_frameno = frameno,
-		nl->inppos = 0;
-
-	if( nl->wait_frameno == frameno ) {
-
-		if( nl->inppos + framelen  <=  ETHER_MAX_LEN )
-			frame_ok = append_frame_to_pkt( dev, framelen, crc );
-
-		/*
-		 * if CRC is right but framelen incorrect then transmitter
-		 * error was occurred... drop entire packet
-		 */
-		else if( (frame_ok = skip_tail( dev->base_addr, framelen, crc ))
-			 != 0 )
-			nl->wait_frameno = 0,
-			nl->inppos = 0,
-#ifdef CONFIG_SBNI_MULTILINE
-			nl->master->stats.rx_errors++,
-			nl->master->stats.rx_missed_errors++;
-#else
-		        dev->stats.rx_errors++,
-			dev->stats.rx_missed_errors++;
-#endif
-			/* now skip all frames until is_first != 0 */
-	} else
-		frame_ok = skip_tail( dev->base_addr, framelen, crc );
-
-	if( is_first  &&  !frame_ok )
-		/*
-		 * Frame has been broken, but we had already stored
-		 * is_first... Drop entire packet.
-		 */
-		nl->wait_frameno = 0,
-#ifdef CONFIG_SBNI_MULTILINE
-		nl->master->stats.rx_errors++,
-		nl->master->stats.rx_crc_errors++;
-#else
-		dev->stats.rx_errors++,
-		dev->stats.rx_crc_errors++;
-#endif
-
-	return  frame_ok;
-}
-
-
-static inline void
-send_complete( struct net_device *dev )
-{
-	struct net_local  *nl = netdev_priv(dev);
-
-#ifdef CONFIG_SBNI_MULTILINE
-	nl->master->stats.tx_packets++;
-	nl->master->stats.tx_bytes += nl->tx_buf_p->len;
-#else
-	dev->stats.tx_packets++;
-	dev->stats.tx_bytes += nl->tx_buf_p->len;
-#endif
-	dev_consume_skb_irq(nl->tx_buf_p);
-
-	nl->tx_buf_p = NULL;
-
-	nl->outpos = 0;
-	nl->state &= ~(FL_WAIT_ACK | FL_NEED_RESEND);
-	nl->framelen   = 0;
-}
-
-
-static void
-interpret_ack( struct net_device  *dev,  unsigned  ack )
-{
-	struct net_local  *nl = netdev_priv(dev);
-
-	if( ack == FRAME_SENT_OK ) {
-		nl->state &= ~FL_NEED_RESEND;
-
-		if( nl->state & FL_WAIT_ACK ) {
-			nl->outpos += nl->framelen;
-
-			if( --nl->tx_frameno )
-				nl->framelen = min_t(unsigned int,
-						   nl->maxframe,
-						   nl->tx_buf_p->len - nl->outpos);
-			else
-				send_complete( dev ),
-#ifdef CONFIG_SBNI_MULTILINE
-				netif_wake_queue( nl->master );
-#else
-				netif_wake_queue( dev );
-#endif
-		}
-	}
-
-	nl->state &= ~FL_WAIT_ACK;
-}
-
-
-/*
- * Glue received frame with previous fragments of packet.
- * Indicate packet when last frame would be accepted.
- */
-
-static int
-append_frame_to_pkt( struct net_device  *dev,  unsigned  framelen,  u32  crc )
-{
-	struct net_local  *nl = netdev_priv(dev);
-
-	u8  *p;
-
-	if( nl->inppos + framelen  >  ETHER_MAX_LEN )
-		return  0;
-
-	if( !nl->rx_buf_p  &&  !(nl->rx_buf_p = get_rx_buf( dev )) )
-		return  0;
-
-	p = nl->rx_buf_p->data + nl->inppos;
-	insb( dev->base_addr + DAT, p, framelen );
-	if( calc_crc32( crc, p, framelen ) != CRC32_REMAINDER )
-		return  0;
-
-	nl->inppos += framelen - 4;
-	if( --nl->wait_frameno == 0 )		/* last frame received */
-		indicate_pkt( dev );
-
-	return  1;
-}
-
-
-/*
- * Prepare to start output on adapter.
- * Transmitter will be actually activated when marker is accepted.
- */
-
-static void
-prepare_to_send( struct sk_buff  *skb,  struct net_device  *dev )
-{
-	struct net_local  *nl = netdev_priv(dev);
-
-	unsigned int  len;
-
-	/* nl->tx_buf_p == NULL here! */
-	if( nl->tx_buf_p )
-		netdev_err(dev, "memory leak!\n");
-
-	nl->outpos = 0;
-	nl->state &= ~(FL_WAIT_ACK | FL_NEED_RESEND);
-
-	len = skb->len;
-	if( len < SBNI_MIN_LEN )
-		len = SBNI_MIN_LEN;
-
-	nl->tx_buf_p	= skb;
-	nl->tx_frameno	= DIV_ROUND_UP(len, nl->maxframe);
-	nl->framelen	= len < nl->maxframe  ?  len  :  nl->maxframe;
-
-	outb( inb( dev->base_addr + CSR0 ) | TR_REQ,  dev->base_addr + CSR0 );
-#ifdef CONFIG_SBNI_MULTILINE
-	netif_trans_update(nl->master);
-#else
-	netif_trans_update(dev);
-#endif
-}
-
-
-static void
-drop_xmit_queue( struct net_device  *dev )
-{
-	struct net_local  *nl = netdev_priv(dev);
-
-	if( nl->tx_buf_p )
-		dev_kfree_skb_any( nl->tx_buf_p ),
-		nl->tx_buf_p = NULL,
-#ifdef CONFIG_SBNI_MULTILINE
-		nl->master->stats.tx_errors++,
-		nl->master->stats.tx_carrier_errors++;
-#else
-		dev->stats.tx_errors++,
-		dev->stats.tx_carrier_errors++;
-#endif
-
-	nl->tx_frameno	= 0;
-	nl->framelen	= 0;
-	nl->outpos	= 0;
-	nl->state &= ~(FL_WAIT_ACK | FL_NEED_RESEND);
-#ifdef CONFIG_SBNI_MULTILINE
-	netif_start_queue( nl->master );
-	netif_trans_update(nl->master);
-#else
-	netif_start_queue( dev );
-	netif_trans_update(dev);
-#endif
-}
-
-
-static void
-send_frame_header( struct net_device  *dev,  u32  *crc_p )
-{
-	struct net_local  *nl  = netdev_priv(dev);
-
-	u32  crc = *crc_p;
-	u32  len_field = nl->framelen + 6;	/* CRC + frameno + reserved */
-	u8   value;
-
-	if( nl->state & FL_NEED_RESEND )
-		len_field |= FRAME_RETRY;	/* non-first attempt... */
-
-	if( nl->outpos == 0 )
-		len_field |= FRAME_FIRST;
-
-	len_field |= (nl->state & FL_PREV_OK) ? FRAME_SENT_OK : FRAME_SENT_BAD;
-	outb( SBNI_SIG, dev->base_addr + DAT );
-
-	value = (u8) len_field;
-	outb( value, dev->base_addr + DAT );
-	crc = CRC32( value, crc );
-	value = (u8) (len_field >> 8);
-	outb( value, dev->base_addr + DAT );
-	crc = CRC32( value, crc );
-
-	outb( nl->tx_frameno, dev->base_addr + DAT );
-	crc = CRC32( nl->tx_frameno, crc );
-	outb( 0, dev->base_addr + DAT );
-	crc = CRC32( 0, crc );
-	*crc_p = crc;
-}
-
-
-/*
- * if frame tail not needed (incorrect number or received twice),
- * it won't store, but CRC will be calculated
- */
-
-static int
-skip_tail( unsigned int  ioaddr,  unsigned int  tail_len,  u32 crc )
-{
-	while( tail_len-- )
-		crc = CRC32( inb( ioaddr + DAT ), crc );
-
-	return  crc == CRC32_REMAINDER;
-}
-
-
-/*
- * Preliminary checks if frame header is correct, calculates its CRC
- * and split it to simple fields
- */
-
-static int
-check_fhdr( u32  ioaddr,  u32  *framelen,  u32  *frameno,  u32  *ack,
-	    u32  *is_first,  u32  *crc_p )
-{
-	u32  crc = *crc_p;
-	u8   value;
-
-	if( inb( ioaddr + DAT ) != SBNI_SIG )
-		return  0;
-
-	value = inb( ioaddr + DAT );
-	*framelen = (u32)value;
-	crc = CRC32( value, crc );
-	value = inb( ioaddr + DAT );
-	*framelen |= ((u32)value) << 8;
-	crc = CRC32( value, crc );
-
-	*ack = *framelen & FRAME_ACK_MASK;
-	*is_first = (*framelen & FRAME_FIRST) != 0;
-
-	if( (*framelen &= FRAME_LEN_MASK) < 6 ||
-	    *framelen > SBNI_MAX_FRAME - 3 )
-		return  0;
-
-	value = inb( ioaddr + DAT );
-	*frameno = (u32)value;
-	crc = CRC32( value, crc );
-
-	crc = CRC32( inb( ioaddr + DAT ), crc );	/* reserved byte */
-	*framelen -= 2;
-
-	*crc_p = crc;
-	return  1;
-}
-
-
-static struct sk_buff *
-get_rx_buf( struct net_device  *dev )
-{
-	/* +2 is to compensate for the alignment fixup below */
-	struct sk_buff  *skb = dev_alloc_skb( ETHER_MAX_LEN + 2 );
-	if( !skb )
-		return  NULL;
-
-	skb_reserve( skb, 2 );		/* Align IP on longword boundaries */
-	return  skb;
-}
-
-
-static void
-indicate_pkt( struct net_device  *dev )
-{
-	struct net_local  *nl  = netdev_priv(dev);
-	struct sk_buff    *skb = nl->rx_buf_p;
-
-	skb_put( skb, nl->inppos );
-
-#ifdef CONFIG_SBNI_MULTILINE
-	skb->protocol = eth_type_trans( skb, nl->master );
-	netif_rx( skb );
-	++nl->master->stats.rx_packets;
-	nl->master->stats.rx_bytes += nl->inppos;
-#else
-	skb->protocol = eth_type_trans( skb, dev );
-	netif_rx( skb );
-	++dev->stats.rx_packets;
-	dev->stats.rx_bytes += nl->inppos;
-#endif
-	nl->rx_buf_p = NULL;	/* protocol driver will clear this sk_buff */
-}
-
-
-/* -------------------------------------------------------------------------- */
-
-/*
- * Routine checks periodically wire activity and regenerates marker if
- * connect was inactive for a long time.
- */
-
-static void
-sbni_watchdog(struct timer_list *t)
-{
-	struct net_local   *nl  = from_timer(nl, t, watchdog);
-	struct net_device  *dev = nl->watchdog_dev;
-	unsigned long	   flags;
-	unsigned char	   csr0;
-
-	spin_lock_irqsave( &nl->lock, flags );
-
-	csr0 = inb( dev->base_addr + CSR0 );
-	if( csr0 & RC_CHK ) {
-
-		if( nl->timer_ticks ) {
-			if( csr0 & (RC_RDY | BU_EMP) )
-				/* receiving not active */
-				nl->timer_ticks--;
-		} else {
-			nl->in_stats.timeout_number++;
-			if( nl->delta_rxl )
-				timeout_change_level( dev );
-
-			outb( *(u_char *)&nl->csr1 | PR_RES,
-			      dev->base_addr + CSR1 );
-			csr0 = inb( dev->base_addr + CSR0 );
-		}
-	} else
-		nl->state &= ~FL_LINE_DOWN;
-
-	outb( csr0 | RC_CHK, dev->base_addr + CSR0 ); 
-
-	mod_timer(t, jiffies + SBNI_TIMEOUT);
-
-	spin_unlock_irqrestore( &nl->lock, flags );
-}
-
-
-static unsigned char  rxl_tab[] = {
-	0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x08,
-	0x0a, 0x0c, 0x0f, 0x16, 0x18, 0x1a, 0x1c, 0x1f
-};
-
-#define SIZE_OF_TIMEOUT_RXL_TAB 4
-static unsigned char  timeout_rxl_tab[] = {
-	0x03, 0x05, 0x08, 0x0b
-};
-
-/* -------------------------------------------------------------------------- */
-
-static void
-card_start( struct net_device  *dev )
-{
-	struct net_local  *nl = netdev_priv(dev);
-
-	nl->timer_ticks = CHANGE_LEVEL_START_TICKS;
-	nl->state &= ~(FL_WAIT_ACK | FL_NEED_RESEND);
-	nl->state |= FL_PREV_OK;
-
-	nl->inppos = nl->outpos = 0;
-	nl->wait_frameno = 0;
-	nl->tx_frameno	 = 0;
-	nl->framelen	 = 0;
-
-	outb( *(u_char *)&nl->csr1 | PR_RES, dev->base_addr + CSR1 );
-	outb( EN_INT, dev->base_addr + CSR0 );
-}
-
-/* -------------------------------------------------------------------------- */
-
-/* Receive level auto-selection */
-
-static void
-change_level( struct net_device  *dev )
-{
-	struct net_local  *nl = netdev_priv(dev);
-
-	if( nl->delta_rxl == 0 )	/* do not auto-negotiate RxL */
-		return;
-
-	if( nl->cur_rxl_index == 0 )
-		nl->delta_rxl = 1;
-	else if( nl->cur_rxl_index == 15 )
-		nl->delta_rxl = -1;
-	else if( nl->cur_rxl_rcvd < nl->prev_rxl_rcvd )
-		nl->delta_rxl = -nl->delta_rxl;
-
-	nl->csr1.rxl = rxl_tab[ nl->cur_rxl_index += nl->delta_rxl ];
-	inb( dev->base_addr + CSR0 );	/* needs for PCI cards */
-	outb( *(u8 *)&nl->csr1, dev->base_addr + CSR1 );
-
-	nl->prev_rxl_rcvd = nl->cur_rxl_rcvd;
-	nl->cur_rxl_rcvd  = 0;
-}
-
-
-static void
-timeout_change_level( struct net_device  *dev )
-{
-	struct net_local  *nl = netdev_priv(dev);
-
-	nl->cur_rxl_index = timeout_rxl_tab[ nl->timeout_rxl ];
-	if( ++nl->timeout_rxl >= 4 )
-		nl->timeout_rxl = 0;
-
-	nl->csr1.rxl = rxl_tab[ nl->cur_rxl_index ];
-	inb( dev->base_addr + CSR0 );
-	outb( *(unsigned char *)&nl->csr1, dev->base_addr + CSR1 );
-
-	nl->prev_rxl_rcvd = nl->cur_rxl_rcvd;
-	nl->cur_rxl_rcvd  = 0;
-}
-
-/* -------------------------------------------------------------------------- */
-
-/*
- *	Open/initialize the board. 
- */
-
-static int
-sbni_open( struct net_device  *dev )
-{
-	struct net_local	*nl = netdev_priv(dev);
-	struct timer_list	*w  = &nl->watchdog;
-
-	/*
-	 * For double ISA adapters within "common irq" mode, we have to
-	 * determine whether primary or secondary channel is initialized,
-	 * and set the irq handler only in first case.
-	 */
-	if( dev->base_addr < 0x400 ) {		/* ISA only */
-		struct net_device  **p = sbni_cards;
-		for( ;  *p  &&  p < sbni_cards + SBNI_MAX_NUM_CARDS;  ++p )
-			if( (*p)->irq == dev->irq &&
-			    ((*p)->base_addr == dev->base_addr + 4 ||
-			     (*p)->base_addr == dev->base_addr - 4) &&
-			    (*p)->flags & IFF_UP ) {
-
-				((struct net_local *) (netdev_priv(*p)))
-					->second = dev;
-				netdev_notice(dev, "using shared irq with %s\n",
-					      (*p)->name);
-				nl->state |= FL_SECONDARY;
-				goto  handler_attached;
-			}
-	}
-
-	if( request_irq(dev->irq, sbni_interrupt, IRQF_SHARED, dev->name, dev) ) {
-		netdev_err(dev, "unable to get IRQ %d\n", dev->irq);
-		return  -EAGAIN;
-	}
-
-handler_attached:
-
-	spin_lock( &nl->lock );
-	memset( &dev->stats, 0, sizeof(struct net_device_stats) );
-	memset( &nl->in_stats, 0, sizeof(struct sbni_in_stats) );
-
-	card_start( dev );
-
-	netif_start_queue( dev );
-
-	/* set timer watchdog */
-	nl->watchdog_dev = dev;
-	timer_setup(w, sbni_watchdog, 0);
-	w->expires	= jiffies + SBNI_TIMEOUT;
-	add_timer( w );
-   
-	spin_unlock( &nl->lock );
-	return 0;
-}
-
-
-static int
-sbni_close( struct net_device  *dev )
-{
-	struct net_local  *nl = netdev_priv(dev);
-
-	if( nl->second  &&  nl->second->flags & IFF_UP ) {
-		netdev_notice(dev, "Secondary channel (%s) is active!\n",
-			      nl->second->name);
-		return  -EBUSY;
-	}
-
-#ifdef CONFIG_SBNI_MULTILINE
-	if( nl->state & FL_SLAVE )
-		emancipate( dev );
-	else
-		while( nl->link )	/* it's master device! */
-			emancipate( nl->link );
-#endif
-
-	spin_lock( &nl->lock );
-
-	nl->second = NULL;
-	drop_xmit_queue( dev );	
-	netif_stop_queue( dev );
-   
-	del_timer( &nl->watchdog );
-
-	outb( 0, dev->base_addr + CSR0 );
-
-	if( !(nl->state & FL_SECONDARY) )
-		free_irq( dev->irq, dev );
-	nl->state &= FL_SECONDARY;
-
-	spin_unlock( &nl->lock );
-	return 0;
-}
-
-
-/*
-	Valid combinations in CSR0 (for probing):
-
-	VALID_DECODER	0000,0011,1011,1010
-
-				    	; 0   ; -
-				TR_REQ	; 1   ; +
-			TR_RDY	    	; 2   ; -
-			TR_RDY	TR_REQ	; 3   ; +
-		BU_EMP		    	; 4   ; +
-		BU_EMP	     	TR_REQ	; 5   ; +
-		BU_EMP	TR_RDY	    	; 6   ; -
-		BU_EMP	TR_RDY	TR_REQ	; 7   ; +
-	RC_RDY 		     		; 8   ; +
-	RC_RDY			TR_REQ	; 9   ; +
-	RC_RDY		TR_RDY		; 10  ; -
-	RC_RDY		TR_RDY	TR_REQ	; 11  ; -
-	RC_RDY	BU_EMP			; 12  ; -
-	RC_RDY	BU_EMP		TR_REQ	; 13  ; -
-	RC_RDY	BU_EMP	TR_RDY		; 14  ; -
-	RC_RDY	BU_EMP	TR_RDY	TR_REQ	; 15  ; -
-*/
-
-#define VALID_DECODER (2 + 8 + 0x10 + 0x20 + 0x80 + 0x100 + 0x200)
-
-
-static int
-sbni_card_probe( unsigned long  ioaddr )
-{
-	unsigned char  csr0;
-
-	csr0 = inb( ioaddr + CSR0 );
-	if( csr0 != 0xff  &&  csr0 != 0x00 ) {
-		csr0 &= ~EN_INT;
-		if( csr0 & BU_EMP )
-			csr0 |= EN_INT;
-      
-		if( VALID_DECODER & (1 << (csr0 >> 4)) )
-			return  0;
-	}
-   
-	return  -ENODEV;
-}
-
-/* -------------------------------------------------------------------------- */
-
-static int
-sbni_ioctl( struct net_device  *dev,  struct ifreq  *ifr,  int  cmd )
-{
-	struct net_local  *nl = netdev_priv(dev);
-	struct sbni_flags  flags;
-	int  error = 0;
-
-#ifdef CONFIG_SBNI_MULTILINE
-	struct net_device  *slave_dev;
-	char  slave_name[ 8 ];
-#endif
-  
-	switch( cmd ) {
-	case  SIOCDEVGETINSTATS :
-		if (copy_to_user( ifr->ifr_data, &nl->in_stats,
-					sizeof(struct sbni_in_stats) ))
-			error = -EFAULT;
-		break;
-
-	case  SIOCDEVRESINSTATS :
-		if (!capable(CAP_NET_ADMIN))
-			return  -EPERM;
-		memset( &nl->in_stats, 0, sizeof(struct sbni_in_stats) );
-		break;
-
-	case  SIOCDEVGHWSTATE :
-		flags.mac_addr	= *(u32 *)(dev->dev_addr + 3);
-		flags.rate	= nl->csr1.rate;
-		flags.slow_mode	= (nl->state & FL_SLOW_MODE) != 0;
-		flags.rxl	= nl->cur_rxl_index;
-		flags.fixed_rxl	= nl->delta_rxl == 0;
-
-		if (copy_to_user( ifr->ifr_data, &flags, sizeof flags ))
-			error = -EFAULT;
-		break;
-
-	case  SIOCDEVSHWSTATE :
-		if (!capable(CAP_NET_ADMIN))
-			return  -EPERM;
-
-		spin_lock( &nl->lock );
-		flags = *(struct sbni_flags*) &ifr->ifr_ifru;
-		if( flags.fixed_rxl )
-			nl->delta_rxl = 0,
-			nl->cur_rxl_index = flags.rxl;
-		else
-			nl->delta_rxl = DEF_RXL_DELTA,
-			nl->cur_rxl_index = DEF_RXL;
-
-		nl->csr1.rxl = rxl_tab[ nl->cur_rxl_index ];
-		nl->csr1.rate = flags.rate;
-		outb( *(u8 *)&nl->csr1 | PR_RES, dev->base_addr + CSR1 );
-		spin_unlock( &nl->lock );
-		break;
-
-#ifdef CONFIG_SBNI_MULTILINE
-
-	case  SIOCDEVENSLAVE :
-		if (!capable(CAP_NET_ADMIN))
-			return  -EPERM;
-
-		if (copy_from_user( slave_name, ifr->ifr_data, sizeof slave_name ))
-			return -EFAULT;
-		slave_dev = dev_get_by_name(&init_net, slave_name );
-		if( !slave_dev  ||  !(slave_dev->flags & IFF_UP) ) {
-			netdev_err(dev, "trying to enslave non-active device %s\n",
-				   slave_name);
-			if (slave_dev)
-				dev_put(slave_dev);
-			return  -EPERM;
-		}
-
-		return  enslave( dev, slave_dev );
-
-	case  SIOCDEVEMANSIPATE :
-		if (!capable(CAP_NET_ADMIN))
-			return  -EPERM;
-
-		return  emancipate( dev );
-
-#endif	/* CONFIG_SBNI_MULTILINE */
-
-	default :
-		return  -EOPNOTSUPP;
-	}
-
-	return  error;
-}
-
-
-#ifdef CONFIG_SBNI_MULTILINE
-
-static int
-enslave( struct net_device  *dev,  struct net_device  *slave_dev )
-{
-	struct net_local  *nl  = netdev_priv(dev);
-	struct net_local  *snl = netdev_priv(slave_dev);
-
-	if( nl->state & FL_SLAVE )	/* This isn't master or free device */
-		return  -EBUSY;
-
-	if( snl->state & FL_SLAVE )	/* That was already enslaved */
-		return  -EBUSY;
-
-	spin_lock( &nl->lock );
-	spin_lock( &snl->lock );
-
-	/* append to list */
-	snl->link = nl->link;
-	nl->link  = slave_dev;
-	snl->master = dev;
-	snl->state |= FL_SLAVE;
-
-	/* Summary statistics of MultiLine operation will be stored
-	   in master's counters */
-	memset( &slave_dev->stats, 0, sizeof(struct net_device_stats) );
-	netif_stop_queue( slave_dev );
-	netif_wake_queue( dev );	/* Now we are able to transmit */
-
-	spin_unlock( &snl->lock );
-	spin_unlock( &nl->lock );
-	netdev_notice(dev, "slave device (%s) attached\n", slave_dev->name);
-	return  0;
-}
-
-
-static int
-emancipate( struct net_device  *dev )
-{
-	struct net_local   *snl = netdev_priv(dev);
-	struct net_device  *p   = snl->master;
-	struct net_local   *nl  = netdev_priv(p);
-
-	if( !(snl->state & FL_SLAVE) )
-		return  -EINVAL;
-
-	spin_lock( &nl->lock );
-	spin_lock( &snl->lock );
-	drop_xmit_queue( dev );
-
-	/* exclude from list */
-	for(;;) {	/* must be in list */
-		struct net_local  *t = netdev_priv(p);
-		if( t->link == dev ) {
-			t->link = snl->link;
-			break;
-		}
-		p = t->link;
-	}
-
-	snl->link = NULL;
-	snl->master = dev;
-	snl->state &= ~FL_SLAVE;
-
-	netif_start_queue( dev );
-
-	spin_unlock( &snl->lock );
-	spin_unlock( &nl->lock );
-
-	dev_put( dev );
-	return  0;
-}
-
-#endif
-
-static void
-set_multicast_list( struct net_device  *dev )
-{
-	return;		/* sbni always operate in promiscuos mode */
-}
-
-
-#ifdef MODULE
-module_param_hw_array(io, int, ioport, NULL, 0);
-module_param_hw_array(irq, int, irq, NULL, 0);
-module_param_array(baud, int, NULL, 0);
-module_param_array(rxl, int, NULL, 0);
-module_param_array(mac, int, NULL, 0);
-module_param(skip_pci_probe, bool, 0);
-
-MODULE_LICENSE("GPL");
-
-
-int __init init_module( void )
-{
-	struct net_device  *dev;
-	int err;
-
-	while( num < SBNI_MAX_NUM_CARDS ) {
-		dev = alloc_netdev(sizeof(struct net_local), "sbni%d",
-				   NET_NAME_UNKNOWN, sbni_devsetup);
-		if( !dev)
-			break;
-
-		sprintf( dev->name, "sbni%d", num );
-
-		err = sbni_init(dev);
-		if (err) {
-			free_netdev(dev);
-			break;
-		}
-
-		if( register_netdev( dev ) ) {
-			release_region( dev->base_addr, SBNI_IO_EXTENT );
-			free_netdev( dev );
-			break;
-		}
-	}
-
-	return  *sbni_cards  ?  0  :  -ENODEV;
-}
-
-void
-cleanup_module(void)
-{
-	int i;
-
-	for (i = 0;  i < SBNI_MAX_NUM_CARDS;  ++i) {
-		struct net_device *dev = sbni_cards[i];
-		if (dev != NULL) {
-			unregister_netdev(dev);
-			release_region(dev->base_addr, SBNI_IO_EXTENT);
-			free_netdev(dev);
-		}
-	}
-}
-
-#else	/* MODULE */
-
-static int __init
-sbni_setup( char  *p )
-{
-	int  n, parm;
-
-	if( *p++ != '(' )
-		goto  bad_param;
-
-	for( n = 0, parm = 0;  *p  &&  n < 8; ) {
-		(*dest[ parm ])[ n ] = simple_strtol( p, &p, 0 );
-		if( !*p  ||  *p == ')' )
-			return 1;
-		if( *p == ';' )
-			++p, ++n, parm = 0;
-		else if( *p++ != ',' )
-			break;
-		else
-			if( ++parm >= 5 )
-				break;
-	}
-bad_param:
-	pr_err("Error in sbni kernel parameter!\n");
-	return 0;
-}
-
-__setup( "sbni=", sbni_setup );
-
-#endif	/* MODULE */
-
-/* -------------------------------------------------------------------------- */
-
-static u32
-calc_crc32( u32  crc,  u8  *p,  u32  len )
-{
-	while( len-- )
-		crc = CRC32( *p++, crc );
-
-	return  crc;
-}
-
-static u32  crc32tab[] __attribute__ ((aligned(8))) = {
-	0xD202EF8D,  0xA505DF1B,  0x3C0C8EA1,  0x4B0BBE37,
-	0xD56F2B94,  0xA2681B02,  0x3B614AB8,  0x4C667A2E,
-	0xDCD967BF,  0xABDE5729,  0x32D70693,  0x45D03605,
-	0xDBB4A3A6,  0xACB39330,  0x35BAC28A,  0x42BDF21C,
-	0xCFB5FFE9,  0xB8B2CF7F,  0x21BB9EC5,  0x56BCAE53,
-	0xC8D83BF0,  0xBFDF0B66,  0x26D65ADC,  0x51D16A4A,
-	0xC16E77DB,  0xB669474D,  0x2F6016F7,  0x58672661,
-	0xC603B3C2,  0xB1048354,  0x280DD2EE,  0x5F0AE278,
-	0xE96CCF45,  0x9E6BFFD3,  0x0762AE69,  0x70659EFF,
-	0xEE010B5C,  0x99063BCA,  0x000F6A70,  0x77085AE6,
-	0xE7B74777,  0x90B077E1,  0x09B9265B,  0x7EBE16CD,
-	0xE0DA836E,  0x97DDB3F8,  0x0ED4E242,  0x79D3D2D4,
-	0xF4DBDF21,  0x83DCEFB7,  0x1AD5BE0D,  0x6DD28E9B,
-	0xF3B61B38,  0x84B12BAE,  0x1DB87A14,  0x6ABF4A82,
-	0xFA005713,  0x8D076785,  0x140E363F,  0x630906A9,
-	0xFD6D930A,  0x8A6AA39C,  0x1363F226,  0x6464C2B0,
-	0xA4DEAE1D,  0xD3D99E8B,  0x4AD0CF31,  0x3DD7FFA7,
-	0xA3B36A04,  0xD4B45A92,  0x4DBD0B28,  0x3ABA3BBE,
-	0xAA05262F,  0xDD0216B9,  0x440B4703,  0x330C7795,
-	0xAD68E236,  0xDA6FD2A0,  0x4366831A,  0x3461B38C,
-	0xB969BE79,  0xCE6E8EEF,  0x5767DF55,  0x2060EFC3,
-	0xBE047A60,  0xC9034AF6,  0x500A1B4C,  0x270D2BDA,
-	0xB7B2364B,  0xC0B506DD,  0x59BC5767,  0x2EBB67F1,
-	0xB0DFF252,  0xC7D8C2C4,  0x5ED1937E,  0x29D6A3E8,
-	0x9FB08ED5,  0xE8B7BE43,  0x71BEEFF9,  0x06B9DF6F,
-	0x98DD4ACC,  0xEFDA7A5A,  0x76D32BE0,  0x01D41B76,
-	0x916B06E7,  0xE66C3671,  0x7F6567CB,  0x0862575D,
-	0x9606C2FE,  0xE101F268,  0x7808A3D2,  0x0F0F9344,
-	0x82079EB1,  0xF500AE27,  0x6C09FF9D,  0x1B0ECF0B,
-	0x856A5AA8,  0xF26D6A3E,  0x6B643B84,  0x1C630B12,
-	0x8CDC1683,  0xFBDB2615,  0x62D277AF,  0x15D54739,
-	0x8BB1D29A,  0xFCB6E20C,  0x65BFB3B6,  0x12B88320,
-	0x3FBA6CAD,  0x48BD5C3B,  0xD1B40D81,  0xA6B33D17,
-	0x38D7A8B4,  0x4FD09822,  0xD6D9C998,  0xA1DEF90E,
-	0x3161E49F,  0x4666D409,  0xDF6F85B3,  0xA868B525,
-	0x360C2086,  0x410B1010,  0xD80241AA,  0xAF05713C,
-	0x220D7CC9,  0x550A4C5F,  0xCC031DE5,  0xBB042D73,
-	0x2560B8D0,  0x52678846,  0xCB6ED9FC,  0xBC69E96A,
-	0x2CD6F4FB,  0x5BD1C46D,  0xC2D895D7,  0xB5DFA541,
-	0x2BBB30E2,  0x5CBC0074,  0xC5B551CE,  0xB2B26158,
-	0x04D44C65,  0x73D37CF3,  0xEADA2D49,  0x9DDD1DDF,
-	0x03B9887C,  0x74BEB8EA,  0xEDB7E950,  0x9AB0D9C6,
-	0x0A0FC457,  0x7D08F4C1,  0xE401A57B,  0x930695ED,
-	0x0D62004E,  0x7A6530D8,  0xE36C6162,  0x946B51F4,
-	0x19635C01,  0x6E646C97,  0xF76D3D2D,  0x806A0DBB,
-	0x1E0E9818,  0x6909A88E,  0xF000F934,  0x8707C9A2,
-	0x17B8D433,  0x60BFE4A5,  0xF9B6B51F,  0x8EB18589,
-	0x10D5102A,  0x67D220BC,  0xFEDB7106,  0x89DC4190,
-	0x49662D3D,  0x3E611DAB,  0xA7684C11,  0xD06F7C87,
-	0x4E0BE924,  0x390CD9B2,  0xA0058808,  0xD702B89E,
-	0x47BDA50F,  0x30BA9599,  0xA9B3C423,  0xDEB4F4B5,
-	0x40D06116,  0x37D75180,  0xAEDE003A,  0xD9D930AC,
-	0x54D13D59,  0x23D60DCF,  0xBADF5C75,  0xCDD86CE3,
-	0x53BCF940,  0x24BBC9D6,  0xBDB2986C,  0xCAB5A8FA,
-	0x5A0AB56B,  0x2D0D85FD,  0xB404D447,  0xC303E4D1,
-	0x5D677172,  0x2A6041E4,  0xB369105E,  0xC46E20C8,
-	0x72080DF5,  0x050F3D63,  0x9C066CD9,  0xEB015C4F,
-	0x7565C9EC,  0x0262F97A,  0x9B6BA8C0,  0xEC6C9856,
-	0x7CD385C7,  0x0BD4B551,  0x92DDE4EB,  0xE5DAD47D,
-	0x7BBE41DE,  0x0CB97148,  0x95B020F2,  0xE2B71064,
-	0x6FBF1D91,  0x18B82D07,  0x81B17CBD,  0xF6B64C2B,
-	0x68D2D988,  0x1FD5E91E,  0x86DCB8A4,  0xF1DB8832,
-	0x616495A3,  0x1663A535,  0x8F6AF48F,  0xF86DC419,
-	0x660951BA,  0x110E612C,  0x88073096,  0xFF000000
-};
-
diff --git a/drivers/net/wan/sbni.h b/drivers/net/wan/sbni.h
deleted file mode 100644
index 84264510a8ed..000000000000
--- a/drivers/net/wan/sbni.h
+++ /dev/null
@@ -1,147 +0,0 @@
-/* sbni.h:  definitions for a Granch SBNI12 driver, version 5.0.0
- * Written 2001 Denis I.Timofeev (timofeev@granch.ru)
- * This file is distributed under the GNU GPL
- */
-
-#ifndef SBNI_H
-#define SBNI_H
-
-#ifdef SBNI_DEBUG
-#define DP( A ) A
-#else
-#define DP( A )
-#endif
-
-
-/* We don't have official vendor id yet... */
-#define SBNI_PCI_VENDOR 	0x55 
-#define SBNI_PCI_DEVICE 	0x9f
-
-#define ISA_MODE 0x00
-#define PCI_MODE 0x01
-
-#define	SBNI_IO_EXTENT	4
-
-enum sbni_reg {
-	CSR0 = 0,
-	CSR1 = 1,
-	DAT  = 2
-};
-
-/* CSR0 mapping */
-enum {
-	BU_EMP = 0x02,
-	RC_CHK = 0x04,
-	CT_ZER = 0x08,
-	TR_REQ = 0x10,
-	TR_RDY = 0x20,
-	EN_INT = 0x40,
-	RC_RDY = 0x80
-};
-
-
-/* CSR1 mapping */
-#define PR_RES 0x80
-
-struct sbni_csr1 {
-#ifdef __LITTLE_ENDIAN_BITFIELD
-	u8 rxl	: 5;
-	u8 rate	: 2;
-	u8 	: 1;
-#else
-	u8 	: 1;
-	u8 rate	: 2;
-	u8 rxl	: 5;
-#endif
-};
-
-/* fields in frame header */
-#define FRAME_ACK_MASK  (unsigned short)0x7000
-#define FRAME_LEN_MASK  (unsigned short)0x03FF
-#define FRAME_FIRST     (unsigned short)0x8000
-#define FRAME_RETRY     (unsigned short)0x0800
-
-#define FRAME_SENT_BAD  (unsigned short)0x4000
-#define FRAME_SENT_OK   (unsigned short)0x3000
-
-
-/* state flags */
-enum {
-	FL_WAIT_ACK    = 0x01,
-	FL_NEED_RESEND = 0x02,
-	FL_PREV_OK     = 0x04,
-	FL_SLOW_MODE   = 0x08,
-	FL_SECONDARY   = 0x10,
-#ifdef CONFIG_SBNI_MULTILINE
-	FL_SLAVE       = 0x20,
-#endif
-	FL_LINE_DOWN   = 0x40
-};
-
-
-enum {
-	DEFAULT_IOBASEADDR = 0x210,
-	DEFAULT_INTERRUPTNUMBER = 5,
-	DEFAULT_RATE = 0,
-	DEFAULT_FRAME_LEN = 1012
-};
-
-#define DEF_RXL_DELTA	-1
-#define DEF_RXL		0xf
-
-#define SBNI_SIG 0x5a
-
-#define	SBNI_MIN_LEN	60	/* Shortest Ethernet frame without FCS */
-#define SBNI_MAX_FRAME	1023
-#define ETHER_MAX_LEN	1518
-
-#define SBNI_TIMEOUT	(HZ/10)
-
-#define TR_ERROR_COUNT	32
-#define CHANGE_LEVEL_START_TICKS 4
-
-#define SBNI_MAX_NUM_CARDS	16
-
-/* internal SBNI-specific statistics */
-struct sbni_in_stats {
-	u32	all_rx_number;
-	u32	bad_rx_number;
-	u32	timeout_number;
-	u32	all_tx_number;
-	u32	resend_tx_number;
-};
-
-/* SBNI ioctl params */
-#define SIOCDEVGETINSTATS 	SIOCDEVPRIVATE
-#define SIOCDEVRESINSTATS 	SIOCDEVPRIVATE+1
-#define SIOCDEVGHWSTATE   	SIOCDEVPRIVATE+2
-#define SIOCDEVSHWSTATE   	SIOCDEVPRIVATE+3
-#define SIOCDEVENSLAVE  	SIOCDEVPRIVATE+4
-#define SIOCDEVEMANSIPATE  	SIOCDEVPRIVATE+5
-
-
-/* data packet for SIOCDEVGHWSTATE/SIOCDEVSHWSTATE ioctl requests */
-struct sbni_flags {
-	u32	rxl		: 4;
-	u32	rate		: 2;
-	u32	fixed_rxl	: 1;
-	u32	slow_mode	: 1;
-	u32	mac_addr	: 24;
-};
-
-/*
- * CRC-32 stuff
- */
-#define CRC32(c,crc) (crc32tab[((size_t)(crc) ^ (c)) & 0xff] ^ (((crc) >> 8) & 0x00FFFFFF))
-      /* CRC generator 0xEDB88320 */
-      /* CRC remainder 0x2144DF1C */
-      /* CRC initial value 0x00000000 */
-#define CRC32_REMAINDER 0x2144DF1C
-#define CRC32_INITIAL 0x00000000
-
-#ifndef __initdata
-#define __initdata
-#endif
-
-#endif
-
diff --git a/include/net/Space.h b/include/net/Space.h
index 9cce0d80d37a..475fe96574e5 100644
--- a/include/net/Space.h
+++ b/include/net/Space.h
@@ -25,6 +25,3 @@ struct net_device *ltpc_probe(void);
 
 /* Fibre Channel adapters */
 int iph5526_probe(struct net_device *dev);
-
-/* SBNI adapters */
-int sbni_probe(int unit);
-- 
2.20.0


^ permalink raw reply	[flat|nested] 12+ messages in thread

* [PATCH 3/4] [net-next] wan: remove old frame relay driver
  2019-12-09 15:12 [PATCH 1/4] [net-next] wan: remove stale Kconfig entries Arnd Bergmann
  2019-12-09 15:12 ` [PATCH 2/4] [net-next] wan: remove sbni/granch driver Arnd Bergmann
@ 2019-12-09 15:12 ` Arnd Bergmann
  2019-12-09 15:12 ` [PATCH 4/4] [RFC] staging/net: move AF_X25 into drivers/staging Arnd Bergmann
  2 siblings, 0 replies; 12+ messages in thread
From: Arnd Bergmann @ 2019-12-09 15:12 UTC (permalink / raw)
  To: David S. Miller, Krzysztof Halasa
  Cc: Greg Kroah-Hartman, devel, netdev, Arnd Bergmann, linux-kernel

The DLCI framework and SDLA driver are as obsolete as it gets,
this is an ISA add-on card from the mid-1990s that has only
seen sporadic cleanups.

The website listed for downloading the user space tools has dropped
off the internet at some point around 2010, but Debian already
dropped the packages ten years earlier when they no longer built
correctly.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
 Documentation/networking/framerelay.txt |   39 -
 MAINTAINERS                             |    6 -
 drivers/net/wan/Kconfig                 |   45 -
 drivers/net/wan/Makefile                |    2 -
 drivers/net/wan/dlci.c                  |  542 --------
 drivers/net/wan/sdla.c                  | 1655 -----------------------
 include/Kbuild                          |    1 -
 include/linux/if_frad.h                 |   92 --
 include/linux/sdla.h                    |  240 ----
 include/uapi/linux/if_frad.h            |  123 --
 include/uapi/linux/sdla.h               |  117 --
 net/socket.c                            |   25 -
 12 files changed, 2887 deletions(-)
 delete mode 100644 Documentation/networking/framerelay.txt
 delete mode 100644 drivers/net/wan/dlci.c
 delete mode 100644 drivers/net/wan/sdla.c
 delete mode 100644 include/linux/if_frad.h
 delete mode 100644 include/linux/sdla.h
 delete mode 100644 include/uapi/linux/if_frad.h
 delete mode 100644 include/uapi/linux/sdla.h

diff --git a/Documentation/networking/framerelay.txt b/Documentation/networking/framerelay.txt
deleted file mode 100644
index 1a0b720440dd..000000000000
--- a/Documentation/networking/framerelay.txt
+++ /dev/null
@@ -1,39 +0,0 @@
-Frame Relay (FR) support for linux is built into a two tiered system of device 
-drivers.  The upper layer implements RFC1490 FR specification, and uses the
-Data Link Connection Identifier (DLCI) as its hardware address.  Usually these
-are assigned by your network supplier, they give you the number/numbers of
-the Virtual Connections (VC) assigned to you.
-
-Each DLCI is a point-to-point link between your machine and a remote one.
-As such, a separate device is needed to accommodate the routing.  Within the
-net-tools archives is 'dlcicfg'.  This program will communicate with the
-base "DLCI" device, and create new net devices named 'dlci00', 'dlci01'... 
-The configuration script will ask you how many DLCIs you need, as well as
-how many DLCIs you want to assign to each Frame Relay Access Device (FRAD).
-
-The DLCI uses a number of function calls to communicate with the FRAD, all
-of which are stored in the FRAD's private data area.  assoc/deassoc, 
-activate/deactivate and dlci_config.  The DLCI supplies a receive function
-to the FRAD to accept incoming packets.
-
-With this initial offering, only 1 FRAD driver is available.  With many thanks
-to Sangoma Technologies, David Mandelstam & Gene Kozin, the S502A, S502E & 
-S508 are supported.  This driver is currently set up for only FR, but as 
-Sangoma makes more firmware modules available, it can be updated to provide
-them as well.
-
-Configuration of the FRAD makes use of another net-tools program, 'fradcfg'.
-This program makes use of a configuration file (which dlcicfg can also read)
-to specify the types of boards to be configured as FRADs, as well as perform
-any board specific configuration.  The Sangoma module of fradcfg loads the
-FR firmware into the card, sets the irq/port/memory information, and provides
-an initial configuration.
-
-Additional FRAD device drivers can be added as hardware is available.
-
-At this time, the dlcicfg and fradcfg programs have not been incorporated into
-the net-tools distribution.  They can be found at ftp.invlogic.com, in 
-/pub/linux.  Note that with OS/2 FTPD, you end up in /pub by default, so just
-use 'cd linux'.  v0.10 is for use on pre-2.0.3 and earlier, v0.15 is for 
-pre-2.0.4 and later.
-
diff --git a/MAINTAINERS b/MAINTAINERS
index 0a996ac26047..32fab6fbd301 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -6436,12 +6436,6 @@ W:	http://floatingpoint.sourceforge.net/emulator/index.html
 S:	Maintained
 F:	arch/x86/math-emu/
 
-FRAME RELAY DLCI/FRAD (Sangoma drivers too)
-L:	netdev@vger.kernel.org
-S:	Orphan
-F:	drivers/net/wan/dlci.c
-F:	drivers/net/wan/sdla.c
-
 FRAMEBUFFER LAYER
 M:	Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
 L:	dri-devel@lists.freedesktop.org
diff --git a/drivers/net/wan/Kconfig b/drivers/net/wan/Kconfig
index e9ad63115144..74f2bd639b07 100644
--- a/drivers/net/wan/Kconfig
+++ b/drivers/net/wan/Kconfig
@@ -297,51 +297,6 @@ config IXP4XX_HSS
 	  Say Y here if you want to use built-in HSS ports
 	  on IXP4xx processor.
 
-config DLCI
-	tristate "Frame Relay DLCI support"
-	---help---
-	  Support for the Frame Relay protocol.
-
-	  Frame Relay is a fast low-cost way to connect to a remote Internet
-	  access provider or to form a private wide area network. The one
-	  physical line from your box to the local "switch" (i.e. the entry
-	  point to the Frame Relay network, usually at the phone company) can
-	  carry several logical point-to-point connections to other computers
-	  connected to the Frame Relay network. For a general explanation of
-	  the protocol, check out <http://www.mplsforum.org/>.
-
-	  To use frame relay, you need supporting hardware (called FRAD) and
-	  certain programs from the net-tools package as explained in
-	  <file:Documentation/networking/framerelay.txt>.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called dlci.
-
-config DLCI_MAX
-	int "Max DLCI per device"
-	depends on DLCI
-	default "8"
-	help
-	  How many logical point-to-point frame relay connections (the
-	  identifiers of which are called DCLIs) should be handled by each
-	  of your hardware frame relay access devices.
-
-	  Go with the default.
-
-config SDLA
-	tristate "SDLA (Sangoma S502/S508) support"
-	depends on DLCI && ISA
-	help
-	  Driver for the Sangoma S502A, S502E, and S508 Frame Relay Access
-	  Devices.
-
-	  These are multi-protocol cards, but only Frame Relay is supported
-	  by the driver at this time. Please read
-	  <file:Documentation/networking/framerelay.txt>.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called sdla.
-
 # X.25 network drivers
 config LAPBETHER
 	tristate "LAPB over Ethernet driver"
diff --git a/drivers/net/wan/Makefile b/drivers/net/wan/Makefile
index 3059b9a279b3..4438a0c4a272 100644
--- a/drivers/net/wan/Makefile
+++ b/drivers/net/wan/Makefile
@@ -22,8 +22,6 @@ obj-$(CONFIG_X25_ASY)		+= x25_asy.o
 
 obj-$(CONFIG_LANMEDIA)		+= lmc/
 
-obj-$(CONFIG_DLCI)		+= dlci.o 
-obj-$(CONFIG_SDLA)		+= sdla.o
 obj-$(CONFIG_LAPBETHER)		+= lapbether.o
 obj-$(CONFIG_N2)		+= n2.o
 obj-$(CONFIG_C101)		+= c101.o
diff --git a/drivers/net/wan/dlci.c b/drivers/net/wan/dlci.c
deleted file mode 100644
index 7bcee41905cf..000000000000
--- a/drivers/net/wan/dlci.c
+++ /dev/null
@@ -1,542 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * DLCI		Implementation of Frame Relay protocol for Linux, according to
- *		RFC 1490.  This generic device provides en/decapsulation for an
- *		underlying hardware driver.  Routes & IPs are assigned to these
- *		interfaces.  Requires 'dlcicfg' program to create usable 
- *		interfaces, the initial one, 'dlci' is for IOCTL use only.
- *
- * Version:	@(#)dlci.c	0.35	4 Jan 1997
- *
- * Author:	Mike McLagan <mike.mclagan@linux.org>
- *
- * Changes:
- *
- *		0.15	Mike Mclagan	Packet freeing, bug in kmalloc call
- *					DLCI_RET handling
- *		0.20	Mike McLagan	More conservative on which packets
- *					are returned for retry and which are
- *					are dropped.  If DLCI_RET_DROP is
- *					returned from the FRAD, the packet is
- *				 	sent back to Linux for re-transmission
- *		0.25	Mike McLagan	Converted to use SIOC IOCTL calls
- *		0.30	Jim Freeman	Fixed to allow IPX traffic
- *		0.35	Michael Elizabeth	Fixed incorrect memcpy_fromfs
- */
-
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/fcntl.h>
-#include <linux/interrupt.h>
-#include <linux/ptrace.h>
-#include <linux/ioport.h>
-#include <linux/in.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/string.h>
-#include <linux/errno.h>
-#include <linux/netdevice.h>
-#include <linux/skbuff.h>
-#include <linux/if_arp.h>
-#include <linux/if_frad.h>
-#include <linux/bitops.h>
-
-#include <net/sock.h>
-
-#include <asm/io.h>
-#include <asm/dma.h>
-#include <linux/uaccess.h>
-
-static const char version[] = "DLCI driver v0.35, 4 Jan 1997, mike.mclagan@linux.org";
-
-static LIST_HEAD(dlci_devs);
-
-static void dlci_setup(struct net_device *);
-
-/* 
- * these encapsulate the RFC 1490 requirements as well as 
- * deal with packet transmission and reception, working with
- * the upper network layers 
- */
-
-static int dlci_header(struct sk_buff *skb, struct net_device *dev, 
-		       unsigned short type, const void *daddr,
-		       const void *saddr, unsigned len)
-{
-	struct frhdr		hdr;
-	unsigned int		hlen;
-	char			*dest;
-
-	hdr.control = FRAD_I_UI;
-	switch (type)
-	{
-		case ETH_P_IP:
-			hdr.IP_NLPID = FRAD_P_IP;
-			hlen = sizeof(hdr.control) + sizeof(hdr.IP_NLPID);
-			break;
-
-		/* feel free to add other types, if necessary */
-
-		default:
-			hdr.pad = FRAD_P_PADDING;
-			hdr.NLPID = FRAD_P_SNAP;
-			memset(hdr.OUI, 0, sizeof(hdr.OUI));
-			hdr.PID = htons(type);
-			hlen = sizeof(hdr);
-			break;
-	}
-
-	dest = skb_push(skb, hlen);
-	if (!dest)
-		return 0;
-
-	memcpy(dest, &hdr, hlen);
-
-	return hlen;
-}
-
-static void dlci_receive(struct sk_buff *skb, struct net_device *dev)
-{
-	struct frhdr		*hdr;
-	int					process, header;
-
-	if (!pskb_may_pull(skb, sizeof(*hdr))) {
-		netdev_notice(dev, "invalid data no header\n");
-		dev->stats.rx_errors++;
-		kfree_skb(skb);
-		return;
-	}
-
-	hdr = (struct frhdr *) skb->data;
-	process = 0;
-	header = 0;
-	skb->dev = dev;
-
-	if (hdr->control != FRAD_I_UI)
-	{
-		netdev_notice(dev, "Invalid header flag 0x%02X\n",
-			      hdr->control);
-		dev->stats.rx_errors++;
-	}
-	else
-		switch (hdr->IP_NLPID)
-		{
-			case FRAD_P_PADDING:
-				if (hdr->NLPID != FRAD_P_SNAP)
-				{
-					netdev_notice(dev, "Unsupported NLPID 0x%02X\n",
-						      hdr->NLPID);
-					dev->stats.rx_errors++;
-					break;
-				}
-	 
-				if (hdr->OUI[0] + hdr->OUI[1] + hdr->OUI[2] != 0)
-				{
-					netdev_notice(dev, "Unsupported organizationally unique identifier 0x%02X-%02X-%02X\n",
-						      hdr->OUI[0],
-						      hdr->OUI[1],
-						      hdr->OUI[2]);
-					dev->stats.rx_errors++;
-					break;
-				}
-
-				/* at this point, it's an EtherType frame */
-				header = sizeof(struct frhdr);
-				/* Already in network order ! */
-				skb->protocol = hdr->PID;
-				process = 1;
-				break;
-
-			case FRAD_P_IP:
-				header = sizeof(hdr->control) + sizeof(hdr->IP_NLPID);
-				skb->protocol = htons(ETH_P_IP);
-				process = 1;
-				break;
-
-			case FRAD_P_SNAP:
-			case FRAD_P_Q933:
-			case FRAD_P_CLNP:
-				netdev_notice(dev, "Unsupported NLPID 0x%02X\n",
-					      hdr->pad);
-				dev->stats.rx_errors++;
-				break;
-
-			default:
-				netdev_notice(dev, "Invalid pad byte 0x%02X\n",
-					      hdr->pad);
-				dev->stats.rx_errors++;
-				break;				
-		}
-
-	if (process)
-	{
-		/* we've set up the protocol, so discard the header */
-		skb_reset_mac_header(skb);
-		skb_pull(skb, header);
-		dev->stats.rx_bytes += skb->len;
-		netif_rx(skb);
-		dev->stats.rx_packets++;
-	}
-	else
-		dev_kfree_skb(skb);
-}
-
-static netdev_tx_t dlci_transmit(struct sk_buff *skb, struct net_device *dev)
-{
-	struct dlci_local *dlp = netdev_priv(dev);
-
-	if (skb) {
-		struct netdev_queue *txq = skb_get_tx_queue(dev, skb);
-		netdev_start_xmit(skb, dlp->slave, txq, false);
-	}
-	return NETDEV_TX_OK;
-}
-
-static int dlci_config(struct net_device *dev, struct dlci_conf __user *conf, int get)
-{
-	struct dlci_conf	config;
-	struct dlci_local	*dlp;
-	struct frad_local	*flp;
-	int			err;
-
-	dlp = netdev_priv(dev);
-
-	flp = netdev_priv(dlp->slave);
-
-	if (!get)
-	{
-		if (copy_from_user(&config, conf, sizeof(struct dlci_conf)))
-			return -EFAULT;
-		if (config.flags & ~DLCI_VALID_FLAGS)
-			return -EINVAL;
-		memcpy(&dlp->config, &config, sizeof(struct dlci_conf));
-		dlp->configured = 1;
-	}
-
-	err = (*flp->dlci_conf)(dlp->slave, dev, get);
-	if (err)
-		return err;
-
-	if (get)
-	{
-		if (copy_to_user(conf, &dlp->config, sizeof(struct dlci_conf)))
-			return -EFAULT;
-	}
-
-	return 0;
-}
-
-static int dlci_dev_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
-{
-	struct dlci_local *dlp;
-
-	if (!capable(CAP_NET_ADMIN))
-		return -EPERM;
-
-	dlp = netdev_priv(dev);
-
-	switch (cmd)
-	{
-		case DLCI_GET_SLAVE:
-			if (!*(short *)(dev->dev_addr))
-				return -EINVAL;
-
-			strncpy(ifr->ifr_slave, dlp->slave->name, sizeof(ifr->ifr_slave));
-			break;
-
-		case DLCI_GET_CONF:
-		case DLCI_SET_CONF:
-			if (!*(short *)(dev->dev_addr))
-				return -EINVAL;
-
-			return dlci_config(dev, ifr->ifr_data, cmd == DLCI_GET_CONF);
-
-		default: 
-			return -EOPNOTSUPP;
-	}
-	return 0;
-}
-
-static int dlci_change_mtu(struct net_device *dev, int new_mtu)
-{
-	struct dlci_local *dlp = netdev_priv(dev);
-
-	return dev_set_mtu(dlp->slave, new_mtu);
-}
-
-static int dlci_open(struct net_device *dev)
-{
-	struct dlci_local	*dlp;
-	struct frad_local	*flp;
-	int			err;
-
-	dlp = netdev_priv(dev);
-
-	if (!*(short *)(dev->dev_addr))
-		return -EINVAL;
-
-	if (!netif_running(dlp->slave))
-		return -ENOTCONN;
-
-	flp = netdev_priv(dlp->slave);
-	err = (*flp->activate)(dlp->slave, dev);
-	if (err)
-		return err;
-
-	netif_start_queue(dev);
-
-	return 0;
-}
-
-static int dlci_close(struct net_device *dev)
-{
-	struct dlci_local	*dlp;
-	struct frad_local	*flp;
-	int			err;
-
-	netif_stop_queue(dev);
-
-	dlp = netdev_priv(dev);
-
-	flp = netdev_priv(dlp->slave);
-	err = (*flp->deactivate)(dlp->slave, dev);
-
-	return 0;
-}
-
-static int dlci_add(struct dlci_add *dlci)
-{
-	struct net_device	*master, *slave;
-	struct dlci_local	*dlp;
-	struct frad_local	*flp;
-	int			err = -EINVAL;
-
-
-	/* validate slave device */
-	slave = dev_get_by_name(&init_net, dlci->devname);
-	if (!slave)
-		return -ENODEV;
-
-	if (slave->type != ARPHRD_FRAD || netdev_priv(slave) == NULL)
-		goto err1;
-
-	/* create device name */
-	master = alloc_netdev(sizeof(struct dlci_local), "dlci%d",
-			      NET_NAME_UNKNOWN, dlci_setup);
-	if (!master) {
-		err = -ENOMEM;
-		goto err1;
-	}
-
-	/* make sure same slave not already registered */
-	rtnl_lock();
-	list_for_each_entry(dlp, &dlci_devs, list) {
-		if (dlp->slave == slave) {
-			err = -EBUSY;
-			goto err2;
-		}
-	}
-
-	*(short *)(master->dev_addr) = dlci->dlci;
-
-	dlp = netdev_priv(master);
-	dlp->slave = slave;
-	dlp->master = master;
-
-	flp = netdev_priv(slave);
-	err = (*flp->assoc)(slave, master);
-	if (err < 0)
-		goto err2;
-
-	err = register_netdevice(master);
-	if (err < 0) 
-		goto err2;
-
-	strcpy(dlci->devname, master->name);
-
-	list_add(&dlp->list, &dlci_devs);
-	rtnl_unlock();
-
-	return 0;
-
- err2:
-	rtnl_unlock();
-	free_netdev(master);
- err1:
-	dev_put(slave);
-	return err;
-}
-
-static int dlci_del(struct dlci_add *dlci)
-{
-	struct dlci_local	*dlp;
-	struct frad_local	*flp;
-	struct net_device	*master, *slave;
-	int			err;
-	bool			found = false;
-
-	rtnl_lock();
-
-	/* validate slave device */
-	master = __dev_get_by_name(&init_net, dlci->devname);
-	if (!master) {
-		err = -ENODEV;
-		goto out;
-	}
-
-	list_for_each_entry(dlp, &dlci_devs, list) {
-		if (dlp->master == master) {
-			found = true;
-			break;
-		}
-	}
-	if (!found) {
-		err = -ENODEV;
-		goto out;
-	}
-
-	if (netif_running(master)) {
-		err = -EBUSY;
-		goto out;
-	}
-
-	dlp = netdev_priv(master);
-	slave = dlp->slave;
-	flp = netdev_priv(slave);
-
-	err = (*flp->deassoc)(slave, master);
-	if (!err) {
-		list_del(&dlp->list);
-
-		unregister_netdevice(master);
-
-		dev_put(slave);
-	}
-out:
-	rtnl_unlock();
-	return err;
-}
-
-static int dlci_ioctl(unsigned int cmd, void __user *arg)
-{
-	struct dlci_add add;
-	int err;
-	
-	if (!capable(CAP_NET_ADMIN))
-		return -EPERM;
-
-	if (copy_from_user(&add, arg, sizeof(struct dlci_add)))
-		return -EFAULT;
-
-	switch (cmd)
-	{
-		case SIOCADDDLCI:
-			err = dlci_add(&add);
-
-			if (!err)
-				if (copy_to_user(arg, &add, sizeof(struct dlci_add)))
-					return -EFAULT;
-			break;
-
-		case SIOCDELDLCI:
-			err = dlci_del(&add);
-			break;
-
-		default:
-			err = -EINVAL;
-	}
-
-	return err;
-}
-
-static const struct header_ops dlci_header_ops = {
-	.create	= dlci_header,
-};
-
-static const struct net_device_ops dlci_netdev_ops = {
-	.ndo_open	= dlci_open,
-	.ndo_stop	= dlci_close,
-	.ndo_do_ioctl	= dlci_dev_ioctl,
-	.ndo_start_xmit	= dlci_transmit,
-	.ndo_change_mtu	= dlci_change_mtu,
-};
-
-static void dlci_setup(struct net_device *dev)
-{
-	struct dlci_local *dlp = netdev_priv(dev);
-
-	dev->flags		= 0;
-	dev->header_ops		= &dlci_header_ops;
-	dev->netdev_ops		= &dlci_netdev_ops;
-	dev->needs_free_netdev	= true;
-
-	dlp->receive		= dlci_receive;
-
-	dev->type		= ARPHRD_DLCI;
-	dev->hard_header_len	= sizeof(struct frhdr);
-	dev->addr_len		= sizeof(short);
-
-}
-
-/* if slave is unregistering, then cleanup master */
-static int dlci_dev_event(struct notifier_block *unused,
-			  unsigned long event, void *ptr)
-{
-	struct net_device *dev = netdev_notifier_info_to_dev(ptr);
-
-	if (dev_net(dev) != &init_net)
-		return NOTIFY_DONE;
-
-	if (event == NETDEV_UNREGISTER) {
-		struct dlci_local *dlp;
-
-		list_for_each_entry(dlp, &dlci_devs, list) {
-			if (dlp->slave == dev) {
-				list_del(&dlp->list);
-				unregister_netdevice(dlp->master);
-				dev_put(dlp->slave);
-				break;
-			}
-		}
-	}
-	return NOTIFY_DONE;
-}
-
-static struct notifier_block dlci_notifier = {
-	.notifier_call = dlci_dev_event,
-};
-
-static int __init init_dlci(void)
-{
-	dlci_ioctl_set(dlci_ioctl);
-	register_netdevice_notifier(&dlci_notifier);
-
-	printk("%s.\n", version);
-
-	return 0;
-}
-
-static void __exit dlci_exit(void)
-{
-	struct dlci_local	*dlp, *nxt;
-	
-	dlci_ioctl_set(NULL);
-	unregister_netdevice_notifier(&dlci_notifier);
-
-	rtnl_lock();
-	list_for_each_entry_safe(dlp, nxt, &dlci_devs, list) {
-		unregister_netdevice(dlp->master);
-		dev_put(dlp->slave);
-	}
-	rtnl_unlock();
-}
-
-module_init(init_dlci);
-module_exit(dlci_exit);
-
-MODULE_AUTHOR("Mike McLagan");
-MODULE_DESCRIPTION("Frame Relay DLCI layer");
-MODULE_LICENSE("GPL");
diff --git a/drivers/net/wan/sdla.c b/drivers/net/wan/sdla.c
deleted file mode 100644
index e2e679a01b65..000000000000
--- a/drivers/net/wan/sdla.c
+++ /dev/null
@@ -1,1655 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * SDLA		An implementation of a driver for the Sangoma S502/S508 series
- *		multi-protocol PC interface card.  Initial offering is with 
- *		the DLCI driver, providing Frame Relay support for linux.
- *
- *		Global definitions for the Frame relay interface.
- *
- * Version:	@(#)sdla.c   0.30	12 Sep 1996
- *
- * Credits:	Sangoma Technologies, for the use of 2 cards for an extended
- *			period of time.
- *		David Mandelstam <dm@sangoma.com> for getting me started on 
- *			this project, and incentive to complete it.
- *		Gene Kozen <74604.152@compuserve.com> for providing me with
- *			important information about the cards.
- *
- * Author:	Mike McLagan <mike.mclagan@linux.org>
- *
- * Changes:
- *		0.15	Mike McLagan	Improved error handling, packet dropping
- *		0.20	Mike McLagan	New transmit/receive flags for config
- *					If in FR mode, don't accept packets from
- *					non DLCI devices.
- *		0.25	Mike McLagan	Fixed problem with rejecting packets
- *					from non DLCI devices.
- *		0.30	Mike McLagan	Fixed kernel panic when used with modified
- *					ifconfig
- */
-
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/fcntl.h>
-#include <linux/interrupt.h>
-#include <linux/ptrace.h>
-#include <linux/ioport.h>
-#include <linux/in.h>
-#include <linux/slab.h>
-#include <linux/string.h>
-#include <linux/timer.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/netdevice.h>
-#include <linux/skbuff.h>
-#include <linux/if_arp.h>
-#include <linux/if_frad.h>
-#include <linux/sdla.h>
-#include <linux/bitops.h>
-
-#include <asm/io.h>
-#include <asm/dma.h>
-#include <linux/uaccess.h>
-
-static const char* version = "SDLA driver v0.30, 12 Sep 1996, mike.mclagan@linux.org";
-
-static unsigned int valid_port[] = { 0x250, 0x270, 0x280, 0x300, 0x350, 0x360, 0x380, 0x390};
-
-static unsigned int valid_mem[] = {
-				    0xA0000, 0xA2000, 0xA4000, 0xA6000, 0xA8000, 0xAA000, 0xAC000, 0xAE000, 
-                                    0xB0000, 0xB2000, 0xB4000, 0xB6000, 0xB8000, 0xBA000, 0xBC000, 0xBE000,
-                                    0xC0000, 0xC2000, 0xC4000, 0xC6000, 0xC8000, 0xCA000, 0xCC000, 0xCE000,
-                                    0xD0000, 0xD2000, 0xD4000, 0xD6000, 0xD8000, 0xDA000, 0xDC000, 0xDE000,
-                                    0xE0000, 0xE2000, 0xE4000, 0xE6000, 0xE8000, 0xEA000, 0xEC000, 0xEE000}; 
-
-static DEFINE_SPINLOCK(sdla_lock);
-
-/*********************************************************
- *
- * these are the core routines that access the card itself 
- *
- *********************************************************/
-
-#define SDLA_WINDOW(dev,addr) outb((((addr) >> 13) & 0x1F), (dev)->base_addr + SDLA_REG_Z80_WINDOW)
-
-static void __sdla_read(struct net_device *dev, int addr, void *buf, short len)
-{
-	char          *temp;
-	const void    *base;
-	int           offset, bytes;
-
-	temp = buf;
-	while(len)
-	{	
-		offset = addr & SDLA_ADDR_MASK;
-		bytes = offset + len > SDLA_WINDOW_SIZE ? SDLA_WINDOW_SIZE - offset : len;
-		base = (const void *) (dev->mem_start + offset);
-
-		SDLA_WINDOW(dev, addr);
-		memcpy(temp, base, bytes);
-
-		addr += bytes;
-		temp += bytes;
-		len  -= bytes;
-	}  
-}
-
-static void sdla_read(struct net_device *dev, int addr, void *buf, short len)
-{
-	unsigned long flags;
-	spin_lock_irqsave(&sdla_lock, flags);
-	__sdla_read(dev, addr, buf, len);
-	spin_unlock_irqrestore(&sdla_lock, flags);
-}
-
-static void __sdla_write(struct net_device *dev, int addr, 
-			 const void *buf, short len)
-{
-	const char    *temp;
-	void 	      *base;
-	int           offset, bytes;
-
-	temp = buf;
-	while(len)
-	{
-		offset = addr & SDLA_ADDR_MASK;
-		bytes = offset + len > SDLA_WINDOW_SIZE ? SDLA_WINDOW_SIZE - offset : len;
-		base = (void *) (dev->mem_start + offset);
-
-		SDLA_WINDOW(dev, addr);
-		memcpy(base, temp, bytes);
-
-		addr += bytes;
-		temp += bytes;
-		len  -= bytes;
-	}
-}
-
-static void sdla_write(struct net_device *dev, int addr, 
-		       const void *buf, short len)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&sdla_lock, flags);
-	__sdla_write(dev, addr, buf, len);
-	spin_unlock_irqrestore(&sdla_lock, flags);
-}
-
-
-static void sdla_clear(struct net_device *dev)
-{
-	unsigned long flags;
-	char          *base;
-	int           len, addr, bytes;
-
-	len = 65536;	
-	addr = 0;
-	bytes = SDLA_WINDOW_SIZE;
-	base = (void *) dev->mem_start;
-
-	spin_lock_irqsave(&sdla_lock, flags);
-	while(len)
-	{
-		SDLA_WINDOW(dev, addr);
-		memset(base, 0, bytes);
-
-		addr += bytes;
-		len  -= bytes;
-	}
-	spin_unlock_irqrestore(&sdla_lock, flags);
-
-}
-
-static char sdla_byte(struct net_device *dev, int addr)
-{
-	unsigned long flags;
-	char          byte, *temp;
-
-	temp = (void *) (dev->mem_start + (addr & SDLA_ADDR_MASK));
-
-	spin_lock_irqsave(&sdla_lock, flags);
-	SDLA_WINDOW(dev, addr);
-	byte = *temp;
-	spin_unlock_irqrestore(&sdla_lock, flags);
-
-	return byte;
-}
-
-static void sdla_stop(struct net_device *dev)
-{
-	struct frad_local *flp;
-
-	flp = netdev_priv(dev);
-	switch(flp->type)
-	{
-		case SDLA_S502A:
-			outb(SDLA_S502A_HALT, dev->base_addr + SDLA_REG_CONTROL);
-			flp->state = SDLA_HALT;
-			break;
-		case SDLA_S502E:
-			outb(SDLA_HALT, dev->base_addr + SDLA_REG_Z80_CONTROL);
-			outb(SDLA_S502E_ENABLE, dev->base_addr + SDLA_REG_CONTROL);
-			flp->state = SDLA_S502E_ENABLE;
-			break;
-		case SDLA_S507:
-			flp->state &= ~SDLA_CPUEN;
-			outb(flp->state, dev->base_addr + SDLA_REG_CONTROL);
-			break;
-		case SDLA_S508:
-			flp->state &= ~SDLA_CPUEN;
-			outb(flp->state, dev->base_addr + SDLA_REG_CONTROL);
-			break;
-	}
-}
-
-static void sdla_start(struct net_device *dev)
-{
-	struct frad_local *flp;
-
-	flp = netdev_priv(dev);
-	switch(flp->type)
-	{
-		case SDLA_S502A:
-			outb(SDLA_S502A_NMI, dev->base_addr + SDLA_REG_CONTROL);
-			outb(SDLA_S502A_START, dev->base_addr + SDLA_REG_CONTROL);
-			flp->state = SDLA_S502A_START;
-			break;
-		case SDLA_S502E:
-			outb(SDLA_S502E_CPUEN, dev->base_addr + SDLA_REG_Z80_CONTROL);
-			outb(0x00, dev->base_addr + SDLA_REG_CONTROL);
-			flp->state = 0;
-			break;
-		case SDLA_S507:
-			flp->state |= SDLA_CPUEN;
-			outb(flp->state, dev->base_addr + SDLA_REG_CONTROL);
-			break;
-		case SDLA_S508:
-			flp->state |= SDLA_CPUEN;
-			outb(flp->state, dev->base_addr + SDLA_REG_CONTROL);
-			break;
-	}
-}
-
-/****************************************************
- *
- * this is used for the S502A/E cards to determine
- * the speed of the onboard CPU.  Calibration is
- * necessary for the Frame Relay code uploaded 
- * later.  Incorrect results cause timing problems
- * with link checks & status messages
- *
- ***************************************************/
-
-static int sdla_z80_poll(struct net_device *dev, int z80_addr, int jiffs, char resp1, char resp2)
-{
-	unsigned long start, done, now;
-	char          resp, *temp;
-
-	start = now = jiffies;
-	done = jiffies + jiffs;
-
-	temp = (void *)dev->mem_start;
-	temp += z80_addr & SDLA_ADDR_MASK;
-	
-	resp = ~resp1;
-	while (time_before(jiffies, done) && (resp != resp1) && (!resp2 || (resp != resp2)))
-	{
-		if (jiffies != now)
-		{
-			SDLA_WINDOW(dev, z80_addr);
-			now = jiffies;
-			resp = *temp;
-		}
-	}
-	return time_before(jiffies, done) ? jiffies - start : -1;
-}
-
-/* constants for Z80 CPU speed */
-#define Z80_READY 		'1'	/* Z80 is ready to begin */
-#define LOADER_READY 		'2'	/* driver is ready to begin */
-#define Z80_SCC_OK 		'3'	/* SCC is on board */
-#define Z80_SCC_BAD	 	'4'	/* SCC was not found */
-
-static int sdla_cpuspeed(struct net_device *dev, struct ifreq *ifr)
-{
-	int  jiffs;
-	char data;
-
-	sdla_start(dev);
-	if (sdla_z80_poll(dev, 0, 3*HZ, Z80_READY, 0) < 0)
-		return -EIO;
-
-	data = LOADER_READY;
-	sdla_write(dev, 0, &data, 1);
-
-	if ((jiffs = sdla_z80_poll(dev, 0, 8*HZ, Z80_SCC_OK, Z80_SCC_BAD)) < 0)
-		return -EIO;
-
-	sdla_stop(dev);
-	sdla_read(dev, 0, &data, 1);
-
-	if (data == Z80_SCC_BAD)
-	{
-		printk("%s: SCC bad\n", dev->name);
-		return -EIO;
-	}
-
-	if (data != Z80_SCC_OK)
-		return -EINVAL;
-
-	if (jiffs < 165)
-		ifr->ifr_mtu = SDLA_CPU_16M;
-	else if (jiffs < 220)
-		ifr->ifr_mtu = SDLA_CPU_10M;
-	else if (jiffs < 258)
-		ifr->ifr_mtu = SDLA_CPU_8M;
-	else if (jiffs < 357)
-		ifr->ifr_mtu = SDLA_CPU_7M;
-	else if (jiffs < 467)
-		ifr->ifr_mtu = SDLA_CPU_5M;
-	else
-		ifr->ifr_mtu = SDLA_CPU_3M;
- 
-	return 0;
-}
-
-/************************************************
- *
- *  Direct interaction with the Frame Relay code 
- *  starts here.
- *
- ************************************************/
-
-struct _dlci_stat 
-{
-	short dlci;
-	char  flags;
-} __packed;
-
-struct _frad_stat 
-{
-	char    flags;
-	struct _dlci_stat dlcis[SDLA_MAX_DLCI];
-};
-
-static void sdla_errors(struct net_device *dev, int cmd, int dlci, int ret, int len, void *data) 
-{
-	struct _dlci_stat *pstatus;
-	short             *pdlci;
-	int               i;
-	char              *state, line[30];
-
-	switch (ret)
-	{
-		case SDLA_RET_MODEM:
-			state = data;
-			if (*state & SDLA_MODEM_DCD_LOW)
-				netdev_info(dev, "Modem DCD unexpectedly low!\n");
-			if (*state & SDLA_MODEM_CTS_LOW)
-				netdev_info(dev, "Modem CTS unexpectedly low!\n");
-			/* I should probably do something about this! */
-			break;
-
-		case SDLA_RET_CHANNEL_OFF:
-			netdev_info(dev, "Channel became inoperative!\n");
-			/* same here */
-			break;
-
-		case SDLA_RET_CHANNEL_ON:
-			netdev_info(dev, "Channel became operative!\n");
-			/* same here */
-			break;
-
-		case SDLA_RET_DLCI_STATUS:
-			netdev_info(dev, "Status change reported by Access Node\n");
-			len /= sizeof(struct _dlci_stat);
-			for(pstatus = data, i=0;i < len;i++,pstatus++)
-			{
-				if (pstatus->flags & SDLA_DLCI_NEW)
-					state = "new";
-				else if (pstatus->flags & SDLA_DLCI_DELETED)
-					state = "deleted";
-				else if (pstatus->flags & SDLA_DLCI_ACTIVE)
-					state = "active";
-				else
-				{
-					sprintf(line, "unknown status: %02X", pstatus->flags);
-					state = line;
-				}
-				netdev_info(dev, "DLCI %i: %s\n",
-					    pstatus->dlci, state);
-				/* same here */
-			}
-			break;
-
-		case SDLA_RET_DLCI_UNKNOWN:
-			netdev_info(dev, "Received unknown DLCIs:");
-			len /= sizeof(short);
-			for(pdlci = data,i=0;i < len;i++,pdlci++)
-				pr_cont(" %i", *pdlci);
-			pr_cont("\n");
-			break;
-
-		case SDLA_RET_TIMEOUT:
-			netdev_err(dev, "Command timed out!\n");
-			break;
-
-		case SDLA_RET_BUF_OVERSIZE:
-			netdev_info(dev, "Bc/CIR overflow, acceptable size is %i\n",
-				    len);
-			break;
-
-		case SDLA_RET_BUF_TOO_BIG:
-			netdev_info(dev, "Buffer size over specified max of %i\n",
-				    len);
-			break;
-
-		case SDLA_RET_CHANNEL_INACTIVE:
-		case SDLA_RET_DLCI_INACTIVE:
-		case SDLA_RET_CIR_OVERFLOW:
-		case SDLA_RET_NO_BUFS:
-			if (cmd == SDLA_INFORMATION_WRITE)
-				break;
-			/* Else, fall through */
-
-		default: 
-			netdev_dbg(dev, "Cmd 0x%02X generated return code 0x%02X\n",
-				   cmd, ret);
-			/* Further processing could be done here */
-			break;
-	}
-}
-
-static int sdla_cmd(struct net_device *dev, int cmd, short dlci, short flags, 
-                        void *inbuf, short inlen, void *outbuf, short *outlen)
-{
-	static struct _frad_stat status;
-	struct frad_local        *flp;
-	struct sdla_cmd          *cmd_buf;
-	unsigned long            pflags;
-	unsigned long		 jiffs;
-	int                      ret, waiting, len;
-	long                     window;
-
-	flp = netdev_priv(dev);
-	window = flp->type == SDLA_S508 ? SDLA_508_CMD_BUF : SDLA_502_CMD_BUF;
-	cmd_buf = (struct sdla_cmd *)(dev->mem_start + (window & SDLA_ADDR_MASK));
-	ret = 0;
-	len = 0;
-	jiffs = jiffies + HZ;  /* 1 second is plenty */
-
-	spin_lock_irqsave(&sdla_lock, pflags);
-	SDLA_WINDOW(dev, window);
-	cmd_buf->cmd = cmd;
-	cmd_buf->dlci = dlci;
-	cmd_buf->flags = flags;
-
-	if (inbuf)
-		memcpy(cmd_buf->data, inbuf, inlen);
-
-	cmd_buf->length = inlen;
-
-	cmd_buf->opp_flag = 1;
-	spin_unlock_irqrestore(&sdla_lock, pflags);
-
-	waiting = 1;
-	len = 0;
-	while (waiting && time_before_eq(jiffies, jiffs))
-	{
-		if (waiting++ % 3) 
-		{
-			spin_lock_irqsave(&sdla_lock, pflags);
-			SDLA_WINDOW(dev, window);
-			waiting = ((volatile int)(cmd_buf->opp_flag));
-			spin_unlock_irqrestore(&sdla_lock, pflags);
-		}
-	}
-	
-	if (!waiting)
-	{
-
-		spin_lock_irqsave(&sdla_lock, pflags);
-		SDLA_WINDOW(dev, window);
-		ret = cmd_buf->retval;
-		len = cmd_buf->length;
-		if (outbuf && outlen)
-		{
-			*outlen = *outlen >= len ? len : *outlen;
-
-			if (*outlen)
-				memcpy(outbuf, cmd_buf->data, *outlen);
-		}
-
-		/* This is a local copy that's used for error handling */
-		if (ret)
-			memcpy(&status, cmd_buf->data, len > sizeof(status) ? sizeof(status) : len);
-
-		spin_unlock_irqrestore(&sdla_lock, pflags);
-	}
-	else
-		ret = SDLA_RET_TIMEOUT;
-
-	if (ret != SDLA_RET_OK)
-	   	sdla_errors(dev, cmd, dlci, ret, len, &status);
-
-	return ret;
-}
-
-/***********************************************
- *
- * these functions are called by the DLCI driver 
- *
- ***********************************************/
-
-static int sdla_reconfig(struct net_device *dev);
-
-static int sdla_activate(struct net_device *slave, struct net_device *master)
-{
-	struct frad_local *flp;
-	int i;
-
-	flp = netdev_priv(slave);
-
-	for(i=0;i<CONFIG_DLCI_MAX;i++)
-		if (flp->master[i] == master)
-			break;
-
-	if (i == CONFIG_DLCI_MAX)
-		return -ENODEV;
-
-	flp->dlci[i] = abs(flp->dlci[i]);
-
-	if (netif_running(slave) && (flp->config.station == FRAD_STATION_NODE))
-		sdla_cmd(slave, SDLA_ACTIVATE_DLCI, 0, 0, &flp->dlci[i], sizeof(short), NULL, NULL);
-
-	return 0;
-}
-
-static int sdla_deactivate(struct net_device *slave, struct net_device *master)
-{
-	struct frad_local *flp;
-	int               i;
-
-	flp = netdev_priv(slave);
-
-	for(i=0;i<CONFIG_DLCI_MAX;i++)
-		if (flp->master[i] == master)
-			break;
-
-	if (i == CONFIG_DLCI_MAX)
-		return -ENODEV;
-
-	flp->dlci[i] = -abs(flp->dlci[i]);
-
-	if (netif_running(slave) && (flp->config.station == FRAD_STATION_NODE))
-		sdla_cmd(slave, SDLA_DEACTIVATE_DLCI, 0, 0, &flp->dlci[i], sizeof(short), NULL, NULL);
-
-	return 0;
-}
-
-static int sdla_assoc(struct net_device *slave, struct net_device *master)
-{
-	struct frad_local *flp;
-	int               i;
-
-	if (master->type != ARPHRD_DLCI)
-		return -EINVAL;
-
-	flp = netdev_priv(slave);
-
-	for(i=0;i<CONFIG_DLCI_MAX;i++)
-	{
-		if (!flp->master[i])
-			break;
-		if (abs(flp->dlci[i]) == *(short *)(master->dev_addr))
-			return -EADDRINUSE;
-	} 
-
-	if (i == CONFIG_DLCI_MAX)
-		return -EMLINK;  /* #### Alan: Comments on this ?? */
-
-
-	flp->master[i] = master;
-	flp->dlci[i] = -*(short *)(master->dev_addr);
-	master->mtu = slave->mtu;
-
-	if (netif_running(slave)) {
-		if (flp->config.station == FRAD_STATION_CPE)
-			sdla_reconfig(slave);
-		else
-			sdla_cmd(slave, SDLA_ADD_DLCI, 0, 0, master->dev_addr, sizeof(short), NULL, NULL);
-	}
-
-	return 0;
-}
-
-static int sdla_deassoc(struct net_device *slave, struct net_device *master)
-{
-	struct frad_local *flp;
-	int               i;
-
-	flp = netdev_priv(slave);
-
-	for(i=0;i<CONFIG_DLCI_MAX;i++)
-		if (flp->master[i] == master)
-			break;
-
-	if (i == CONFIG_DLCI_MAX)
-		return -ENODEV;
-
-	flp->master[i] = NULL;
-	flp->dlci[i] = 0;
-
-
-	if (netif_running(slave)) {
-		if (flp->config.station == FRAD_STATION_CPE)
-			sdla_reconfig(slave);
-		else
-			sdla_cmd(slave, SDLA_DELETE_DLCI, 0, 0, master->dev_addr, sizeof(short), NULL, NULL);
-	}
-
-	return 0;
-}
-
-static int sdla_dlci_conf(struct net_device *slave, struct net_device *master, int get)
-{
-	struct frad_local *flp;
-	struct dlci_local *dlp;
-	int               i;
-	short             len, ret;
-
-	flp = netdev_priv(slave);
-
-	for(i=0;i<CONFIG_DLCI_MAX;i++)
-		if (flp->master[i] == master)
-			break;
-
-	if (i == CONFIG_DLCI_MAX)
-		return -ENODEV;
-
-	dlp = netdev_priv(master);
-
-	ret = SDLA_RET_OK;
-	len = sizeof(struct dlci_conf);
-	if (netif_running(slave)) {
-		if (get)
-			ret = sdla_cmd(slave, SDLA_READ_DLCI_CONFIGURATION, abs(flp->dlci[i]), 0,  
-			            NULL, 0, &dlp->config, &len);
-		else
-			ret = sdla_cmd(slave, SDLA_SET_DLCI_CONFIGURATION, abs(flp->dlci[i]), 0,  
-			            &dlp->config, sizeof(struct dlci_conf) - 4 * sizeof(short), NULL, NULL);
-	}
-
-	return ret == SDLA_RET_OK ? 0 : -EIO;
-}
-
-/**************************
- *
- * now for the Linux driver 
- *
- **************************/
-
-/* NOTE: the DLCI driver deals with freeing the SKB!! */
-static netdev_tx_t sdla_transmit(struct sk_buff *skb,
-				 struct net_device *dev)
-{
-	struct frad_local *flp;
-	int               ret, addr, accept, i;
-	short             size;
-	unsigned long     flags;
-	struct buf_entry  *pbuf;
-
-	flp = netdev_priv(dev);
-	ret = 0;
-	accept = 1;
-
-	netif_stop_queue(dev);
-
-	/*
-	 * stupid GateD insists on setting up the multicast router thru us
-	 * and we're ill equipped to handle a non Frame Relay packet at this
-	 * time!
-	 */
-
-	accept = 1;
-	switch (dev->type)
-	{
-		case ARPHRD_FRAD:
-			if (skb->dev->type != ARPHRD_DLCI)
-			{
-				netdev_warn(dev, "Non DLCI device, type %i, tried to send on FRAD module\n",
-					    skb->dev->type);
-				accept = 0;
-			}
-			break;
-		default:
-			netdev_warn(dev, "unknown firmware type 0x%04X\n",
-				    dev->type);
-			accept = 0;
-			break;
-	}
-	if (accept)
-	{
-		/* this is frame specific, but till there's a PPP module, it's the default */
-		switch (flp->type)
-		{
-			case SDLA_S502A:
-			case SDLA_S502E:
-				ret = sdla_cmd(dev, SDLA_INFORMATION_WRITE, *(short *)(skb->dev->dev_addr), 0, skb->data, skb->len, NULL, NULL);
-				break;
-				case SDLA_S508:
-				size = sizeof(addr);
-				ret = sdla_cmd(dev, SDLA_INFORMATION_WRITE, *(short *)(skb->dev->dev_addr), 0, NULL, skb->len, &addr, &size);
-				if (ret == SDLA_RET_OK)
-				{
-
-					spin_lock_irqsave(&sdla_lock, flags);
-					SDLA_WINDOW(dev, addr);
-					pbuf = (void *)(((int) dev->mem_start) + (addr & SDLA_ADDR_MASK));
-					__sdla_write(dev, pbuf->buf_addr, skb->data, skb->len);
-					SDLA_WINDOW(dev, addr);
-					pbuf->opp_flag = 1;
-					spin_unlock_irqrestore(&sdla_lock, flags);
-				}
-				break;
-		}
-
-		switch (ret)
-		{
-			case SDLA_RET_OK:
-				dev->stats.tx_packets++;
-				break;
-
-			case SDLA_RET_CIR_OVERFLOW:
-			case SDLA_RET_BUF_OVERSIZE:
-			case SDLA_RET_NO_BUFS:
-				dev->stats.tx_dropped++;
-				break;
-
-			default:
-				dev->stats.tx_errors++;
-				break;
-		}
-	}
-	netif_wake_queue(dev);
-	for(i=0;i<CONFIG_DLCI_MAX;i++)
-	{
-		if(flp->master[i]!=NULL)
-			netif_wake_queue(flp->master[i]);
-	}		
-
-	dev_kfree_skb(skb);
-	return NETDEV_TX_OK;
-}
-
-static void sdla_receive(struct net_device *dev)
-{
-	struct net_device	  *master;
-	struct frad_local *flp;
-	struct dlci_local *dlp;
-	struct sk_buff	 *skb;
-
-	struct sdla_cmd	*cmd;
-	struct buf_info	*pbufi;
-	struct buf_entry  *pbuf;
-
-	unsigned long	  flags;
-	int               i=0, received, success, addr, buf_base, buf_top;
-	short             dlci, len, len2, split;
-
-	flp = netdev_priv(dev);
-	success = 1;
-	received = addr = buf_top = buf_base = 0;
-	len = dlci = 0;
-	skb = NULL;
-	master = NULL;
-	cmd = NULL;
-	pbufi = NULL;
-	pbuf = NULL;
-
-	spin_lock_irqsave(&sdla_lock, flags);
-
-	switch (flp->type)
-	{
-		case SDLA_S502A:
-		case SDLA_S502E:
-			cmd = (void *) (dev->mem_start + (SDLA_502_RCV_BUF & SDLA_ADDR_MASK));
-			SDLA_WINDOW(dev, SDLA_502_RCV_BUF);
-			success = cmd->opp_flag;
-			if (!success)
-				break;
-
-			dlci = cmd->dlci;
-			len = cmd->length;
-			break;
-
-		case SDLA_S508:
-			pbufi = (void *) (dev->mem_start + (SDLA_508_RXBUF_INFO & SDLA_ADDR_MASK));
-			SDLA_WINDOW(dev, SDLA_508_RXBUF_INFO);
-			pbuf = (void *) (dev->mem_start + ((pbufi->rse_base + flp->buffer * sizeof(struct buf_entry)) & SDLA_ADDR_MASK));
-			success = pbuf->opp_flag;
-			if (!success)
-				break;
-
-			buf_top = pbufi->buf_top;
-			buf_base = pbufi->buf_base;
-			dlci = pbuf->dlci;
-			len = pbuf->length;
-			addr = pbuf->buf_addr;
-			break;
-	}
-
-	/* common code, find the DLCI and get the SKB */
-	if (success)
-	{
-		for (i=0;i<CONFIG_DLCI_MAX;i++)
-			if (flp->dlci[i] == dlci)
-				break;
-
-		if (i == CONFIG_DLCI_MAX)
-		{
-			netdev_notice(dev, "Received packet from invalid DLCI %i, ignoring\n",
-				      dlci);
-			dev->stats.rx_errors++;
-			success = 0;
-		}
-	}
-
-	if (success)
-	{
-		master = flp->master[i];
-		skb = dev_alloc_skb(len + sizeof(struct frhdr));
-		if (skb == NULL) 
-		{
-			netdev_notice(dev, "Memory squeeze, dropping packet\n");
-			dev->stats.rx_dropped++;
-			success = 0;
-		}
-		else
-			skb_reserve(skb, sizeof(struct frhdr));
-	}
-
-	/* pick up the data */
-	switch (flp->type)
-	{
-		case SDLA_S502A:
-		case SDLA_S502E:
-			if (success)
-				__sdla_read(dev, SDLA_502_RCV_BUF + SDLA_502_DATA_OFS, skb_put(skb,len), len);
-
-			SDLA_WINDOW(dev, SDLA_502_RCV_BUF);
-			cmd->opp_flag = 0;
-			break;
-
-		case SDLA_S508:
-			if (success)
-			{
-				/* is this buffer split off the end of the internal ring buffer */
-				split = addr + len > buf_top + 1 ? len - (buf_top - addr + 1) : 0;
-				len2 = len - split;
-
-				__sdla_read(dev, addr, skb_put(skb, len2), len2);
-				if (split)
-					__sdla_read(dev, buf_base, skb_put(skb, split), split);
-			}
-
-			/* increment the buffer we're looking at */
-			SDLA_WINDOW(dev, SDLA_508_RXBUF_INFO);
-			flp->buffer = (flp->buffer + 1) % pbufi->rse_num;
-			pbuf->opp_flag = 0;
-			break;
-	}
-
-	if (success)
-	{
-		dev->stats.rx_packets++;
-		dlp = netdev_priv(master);
-		(*dlp->receive)(skb, master);
-	}
-
-	spin_unlock_irqrestore(&sdla_lock, flags);
-}
-
-static irqreturn_t sdla_isr(int dummy, void *dev_id)
-{
-	struct net_device     *dev;
-	struct frad_local *flp;
-	char              byte;
-
-	dev = dev_id;
-
-	flp = netdev_priv(dev);
-
-	if (!flp->initialized)
-	{
-		netdev_warn(dev, "irq %d for uninitialized device\n", dev->irq);
-		return IRQ_NONE;
-	}
-
-	byte = sdla_byte(dev, flp->type == SDLA_S508 ? SDLA_508_IRQ_INTERFACE : SDLA_502_IRQ_INTERFACE);
-	switch (byte)
-	{
-		case SDLA_INTR_RX:
-			sdla_receive(dev);
-			break;
-
-		/* the command will get an error return, which is processed above */
-		case SDLA_INTR_MODEM:
-		case SDLA_INTR_STATUS:
-			sdla_cmd(dev, SDLA_READ_DLC_STATUS, 0, 0, NULL, 0, NULL, NULL);
-			break;
-
-		case SDLA_INTR_TX:
-		case SDLA_INTR_COMPLETE:
-		case SDLA_INTR_TIMER:
-			netdev_warn(dev, "invalid irq flag 0x%02X\n", byte);
-			break;
-	}
-
-	/* the S502E requires a manual acknowledgement of the interrupt */ 
-	if (flp->type == SDLA_S502E)
-	{
-		flp->state &= ~SDLA_S502E_INTACK;
-		outb(flp->state, dev->base_addr + SDLA_REG_CONTROL);
-		flp->state |= SDLA_S502E_INTACK;
-		outb(flp->state, dev->base_addr + SDLA_REG_CONTROL);
-	}
-
-	/* this clears the byte, informing the Z80 we're done */
-	byte = 0;
-	sdla_write(dev, flp->type == SDLA_S508 ? SDLA_508_IRQ_INTERFACE : SDLA_502_IRQ_INTERFACE, &byte, sizeof(byte));
-	return IRQ_HANDLED;
-}
-
-static void sdla_poll(struct timer_list *t)
-{
-	struct frad_local *flp = from_timer(flp, t, timer);
-	struct net_device *dev = flp->dev;
-
-	if (sdla_byte(dev, SDLA_502_RCV_BUF))
-		sdla_receive(dev);
-
-	flp->timer.expires = 1;
-	add_timer(&flp->timer);
-}
-
-static int sdla_close(struct net_device *dev)
-{
-	struct frad_local *flp;
-	struct intr_info  intr;
-	int               len, i;
-	short             dlcis[CONFIG_DLCI_MAX];
-
-	flp = netdev_priv(dev);
-
-	len = 0;
-	for(i=0;i<CONFIG_DLCI_MAX;i++)
-		if (flp->dlci[i])
-			dlcis[len++] = abs(flp->dlci[i]);
-	len *= 2;
-
-	if (flp->config.station == FRAD_STATION_NODE)
-	{
-		for(i=0;i<CONFIG_DLCI_MAX;i++)
-			if (flp->dlci[i] > 0) 
-				sdla_cmd(dev, SDLA_DEACTIVATE_DLCI, 0, 0, dlcis, len, NULL, NULL);
-		sdla_cmd(dev, SDLA_DELETE_DLCI, 0, 0, &flp->dlci[i], sizeof(flp->dlci[i]), NULL, NULL);
-	}
-
-	memset(&intr, 0, sizeof(intr));
-	/* let's start up the reception */
-	switch(flp->type)
-	{
-		case SDLA_S502A:
-			del_timer(&flp->timer); 
-			break;
-
-		case SDLA_S502E:
-			sdla_cmd(dev, SDLA_SET_IRQ_TRIGGER, 0, 0, &intr, sizeof(char) + sizeof(short), NULL, NULL);
-			flp->state &= ~SDLA_S502E_INTACK;
-			outb(flp->state, dev->base_addr + SDLA_REG_CONTROL);
-			break;
-
-		case SDLA_S507:
-			break;
-
-		case SDLA_S508:
-			sdla_cmd(dev, SDLA_SET_IRQ_TRIGGER, 0, 0, &intr, sizeof(struct intr_info), NULL, NULL);
-			flp->state &= ~SDLA_S508_INTEN;
-			outb(flp->state, dev->base_addr + SDLA_REG_CONTROL);
-			break;
-	}
-
-	sdla_cmd(dev, SDLA_DISABLE_COMMUNICATIONS, 0, 0, NULL, 0, NULL, NULL);
-
-	netif_stop_queue(dev);
-	
-	return 0;
-}
-
-struct conf_data {
-	struct frad_conf config;
-	short            dlci[CONFIG_DLCI_MAX];
-};
-
-static int sdla_open(struct net_device *dev)
-{
-	struct frad_local *flp;
-	struct dlci_local *dlp;
-	struct conf_data  data;
-	struct intr_info  intr;
-	int               len, i;
-	char              byte;
-
-	flp = netdev_priv(dev);
-
-	if (!flp->initialized)
-		return -EPERM;
-
-	if (!flp->configured)
-		return -EPERM;
-
-	/* time to send in the configuration */
-	len = 0;
-	for(i=0;i<CONFIG_DLCI_MAX;i++)
-		if (flp->dlci[i])
-			data.dlci[len++] = abs(flp->dlci[i]);
-	len *= 2;
-
-	memcpy(&data.config, &flp->config, sizeof(struct frad_conf));
-	len += sizeof(struct frad_conf);
-
-	sdla_cmd(dev, SDLA_DISABLE_COMMUNICATIONS, 0, 0, NULL, 0, NULL, NULL);
-	sdla_cmd(dev, SDLA_SET_DLCI_CONFIGURATION, 0, 0, &data, len, NULL, NULL);
-
-	if (flp->type == SDLA_S508)
-		flp->buffer = 0;
-
-	sdla_cmd(dev, SDLA_ENABLE_COMMUNICATIONS, 0, 0, NULL, 0, NULL, NULL);
-
-	/* let's start up the reception */
-	memset(&intr, 0, sizeof(intr));
-	switch(flp->type)
-	{
-		case SDLA_S502A:
-			flp->timer.expires = 1;
-			add_timer(&flp->timer);
-			break;
-
-		case SDLA_S502E:
-			flp->state |= SDLA_S502E_ENABLE;
-			outb(flp->state, dev->base_addr + SDLA_REG_CONTROL);
-			flp->state |= SDLA_S502E_INTACK;
-			outb(flp->state, dev->base_addr + SDLA_REG_CONTROL);
-			byte = 0;
-			sdla_write(dev, SDLA_502_IRQ_INTERFACE, &byte, sizeof(byte));
-			intr.flags = SDLA_INTR_RX | SDLA_INTR_STATUS | SDLA_INTR_MODEM;
-			sdla_cmd(dev, SDLA_SET_IRQ_TRIGGER, 0, 0, &intr, sizeof(char) + sizeof(short), NULL, NULL);
-			break;
-
-		case SDLA_S507:
-			break;
-
-		case SDLA_S508:
-			flp->state |= SDLA_S508_INTEN;
-			outb(flp->state, dev->base_addr + SDLA_REG_CONTROL);
-			byte = 0;
-			sdla_write(dev, SDLA_508_IRQ_INTERFACE, &byte, sizeof(byte));
-			intr.flags = SDLA_INTR_RX | SDLA_INTR_STATUS | SDLA_INTR_MODEM;
-			intr.irq = dev->irq;
-			sdla_cmd(dev, SDLA_SET_IRQ_TRIGGER, 0, 0, &intr, sizeof(struct intr_info), NULL, NULL);
-			break;
-	}
-
-	if (flp->config.station == FRAD_STATION_CPE)
-	{
-		byte = SDLA_ICS_STATUS_ENQ;
-		sdla_cmd(dev, SDLA_ISSUE_IN_CHANNEL_SIGNAL, 0, 0, &byte, sizeof(byte), NULL, NULL);
-	}
-	else
-	{
-		sdla_cmd(dev, SDLA_ADD_DLCI, 0, 0, data.dlci, len - sizeof(struct frad_conf), NULL, NULL);
-		for(i=0;i<CONFIG_DLCI_MAX;i++)
-			if (flp->dlci[i] > 0)
-				sdla_cmd(dev, SDLA_ACTIVATE_DLCI, 0, 0, &flp->dlci[i], 2*sizeof(flp->dlci[i]), NULL, NULL);
-	}
-
-	/* configure any specific DLCI settings */
-	for(i=0;i<CONFIG_DLCI_MAX;i++)
-		if (flp->dlci[i])
-		{
-			dlp = netdev_priv(flp->master[i]);
-			if (dlp->configured)
-				sdla_cmd(dev, SDLA_SET_DLCI_CONFIGURATION, abs(flp->dlci[i]), 0, &dlp->config, sizeof(struct dlci_conf), NULL, NULL);
-		}
-
-	netif_start_queue(dev);
-	
-	return 0;
-}
-
-static int sdla_config(struct net_device *dev, struct frad_conf __user *conf, int get)
-{
-	struct frad_local *flp;
-	struct conf_data  data;
-	int               i;
-	short             size;
-
-	if (dev->type == 0xFFFF)
-		return -EUNATCH;
-
-	flp = netdev_priv(dev);
-
-	if (!get)
-	{
-		if (netif_running(dev))
-			return -EBUSY;
-
-		if(copy_from_user(&data.config, conf, sizeof(struct frad_conf)))
-			return -EFAULT;
-
-		if (data.config.station & ~FRAD_STATION_NODE)
-			return -EINVAL;
-
-		if (data.config.flags & ~FRAD_VALID_FLAGS)
-			return -EINVAL;
-
-		if ((data.config.kbaud < 0) || 
-			 ((data.config.kbaud > 128) && (flp->type != SDLA_S508)))
-			return -EINVAL;
-
-		if (data.config.clocking & ~(FRAD_CLOCK_INT | SDLA_S508_PORT_RS232))
-			return -EINVAL;
-
-		if ((data.config.mtu < 0) || (data.config.mtu > SDLA_MAX_MTU))
-			return -EINVAL;
-
-		if ((data.config.T391 < 5) || (data.config.T391 > 30))
-			return -EINVAL;
-
-		if ((data.config.T392 < 5) || (data.config.T392 > 30))
-			return -EINVAL;
-
-		if ((data.config.N391 < 1) || (data.config.N391 > 255))
-			return -EINVAL;
-
-		if ((data.config.N392 < 1) || (data.config.N392 > 10))
-			return -EINVAL;
-
-		if ((data.config.N393 < 1) || (data.config.N393 > 10))
-			return -EINVAL;
-
-		memcpy(&flp->config, &data.config, sizeof(struct frad_conf));
-		flp->config.flags |= SDLA_DIRECT_RECV;
-
-		if (flp->type == SDLA_S508)
-			flp->config.flags |= SDLA_TX70_RX30;
-
-		if (dev->mtu != flp->config.mtu)
-		{
-			/* this is required to change the MTU */
-			dev->mtu = flp->config.mtu;
-			for(i=0;i<CONFIG_DLCI_MAX;i++)
-				if (flp->master[i])
-					flp->master[i]->mtu = flp->config.mtu;
-		}
-
-		flp->config.mtu += sizeof(struct frhdr);
-
-		/* off to the races! */
-		if (!flp->configured)
-			sdla_start(dev);
-
-		flp->configured = 1;
-	}
-	else
-	{
-		/* no sense reading if the CPU isn't started */
-		if (netif_running(dev))
-		{
-			size = sizeof(data);
-			if (sdla_cmd(dev, SDLA_READ_DLCI_CONFIGURATION, 0, 0, NULL, 0, &data, &size) != SDLA_RET_OK)
-				return -EIO;
-		}
-		else
-			if (flp->configured)
-				memcpy(&data.config, &flp->config, sizeof(struct frad_conf));
-			else
-				memset(&data.config, 0, sizeof(struct frad_conf));
-
-		memcpy(&flp->config, &data.config, sizeof(struct frad_conf));
-		data.config.flags &= FRAD_VALID_FLAGS;
-		data.config.mtu -= data.config.mtu > sizeof(struct frhdr) ? sizeof(struct frhdr) : data.config.mtu;
-		return copy_to_user(conf, &data.config, sizeof(struct frad_conf))?-EFAULT:0;
-	}
-
-	return 0;
-}
-
-static int sdla_xfer(struct net_device *dev, struct sdla_mem __user *info, int read)
-{
-	struct sdla_mem mem;
-	char	*temp;
-
-	if(copy_from_user(&mem, info, sizeof(mem)))
-		return -EFAULT;
-		
-	if (read)
-	{	
-		temp = kzalloc(mem.len, GFP_KERNEL);
-		if (!temp)
-			return -ENOMEM;
-		sdla_read(dev, mem.addr, temp, mem.len);
-		if(copy_to_user(mem.data, temp, mem.len))
-		{
-			kfree(temp);
-			return -EFAULT;
-		}
-		kfree(temp);
-	}
-	else
-	{
-		temp = memdup_user(mem.data, mem.len);
-		if (IS_ERR(temp))
-			return PTR_ERR(temp);
-		sdla_write(dev, mem.addr, temp, mem.len);
-		kfree(temp);
-	}
-	return 0;
-}
-
-static int sdla_reconfig(struct net_device *dev)
-{
-	struct frad_local *flp;
-	struct conf_data  data;
-	int               i, len;
-
-	flp = netdev_priv(dev);
-
-	len = 0;
-	for(i=0;i<CONFIG_DLCI_MAX;i++)
-		if (flp->dlci[i])
-			data.dlci[len++] = flp->dlci[i];
-	len *= 2;
-
-	memcpy(&data, &flp->config, sizeof(struct frad_conf));
-	len += sizeof(struct frad_conf);
-
-	sdla_cmd(dev, SDLA_DISABLE_COMMUNICATIONS, 0, 0, NULL, 0, NULL, NULL);
-	sdla_cmd(dev, SDLA_SET_DLCI_CONFIGURATION, 0, 0, &data, len, NULL, NULL);
-	sdla_cmd(dev, SDLA_ENABLE_COMMUNICATIONS, 0, 0, NULL, 0, NULL, NULL);
-
-	return 0;
-}
-
-static int sdla_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
-{
-	struct frad_local *flp;
-
-	if(!capable(CAP_NET_ADMIN))
-		return -EPERM;
-		
-	flp = netdev_priv(dev);
-
-	if (!flp->initialized)
-		return -EINVAL;
-
-	switch (cmd)
-	{
-		case FRAD_GET_CONF:
-		case FRAD_SET_CONF:
-			return sdla_config(dev, ifr->ifr_data, cmd == FRAD_GET_CONF);
-
-		case SDLA_IDENTIFY:
-			ifr->ifr_flags = flp->type;
-			break;
-
-		case SDLA_CPUSPEED:
-			return sdla_cpuspeed(dev, ifr);
-
-/* ==========================================================
-NOTE:  This is rather a useless action right now, as the
-       current driver does not support protocols other than
-       FR.  However, Sangoma has modules for a number of
-       other protocols in the works.
-============================================================*/
-		case SDLA_PROTOCOL:
-			if (flp->configured)
-				return -EALREADY;
-
-			switch (ifr->ifr_flags)
-			{
-				case ARPHRD_FRAD:
-					dev->type = ifr->ifr_flags;
-					break;
-				default:
-					return -ENOPROTOOPT;
-			}
-			break;
-
-		case SDLA_CLEARMEM:
-			sdla_clear(dev);
-			break;
-
-		case SDLA_WRITEMEM:
-		case SDLA_READMEM:
-			if(!capable(CAP_SYS_RAWIO))
-				return -EPERM;
-			return sdla_xfer(dev, ifr->ifr_data, cmd == SDLA_READMEM);
-
-		case SDLA_START:
-			sdla_start(dev);
-			break;
-
-		case SDLA_STOP:
-			sdla_stop(dev);
-			break;
-
-		default:
-			return -EOPNOTSUPP;
-	}
-	return 0;
-}
-
-static int sdla_change_mtu(struct net_device *dev, int new_mtu)
-{
-	if (netif_running(dev))
-		return -EBUSY;
-
-	/* for now, you can't change the MTU! */
-	return -EOPNOTSUPP;
-}
-
-static int sdla_set_config(struct net_device *dev, struct ifmap *map)
-{
-	struct frad_local *flp;
-	int               i;
-	char              byte;
-	unsigned base;
-	int err = -EINVAL;
-
-	flp = netdev_priv(dev);
-
-	if (flp->initialized)
-		return -EINVAL;
-
-	for(i=0; i < ARRAY_SIZE(valid_port); i++)
-		if (valid_port[i] == map->base_addr)
-			break;   
-
-	if (i == ARRAY_SIZE(valid_port))
-		return -EINVAL;
-
-	if (!request_region(map->base_addr, SDLA_IO_EXTENTS, dev->name)){
-		pr_warn("io-port 0x%04lx in use\n", dev->base_addr);
-		return -EINVAL;
-	}
-	base = map->base_addr;
-
-	/* test for card types, S502A, S502E, S507, S508                 */
-	/* these tests shut down the card completely, so clear the state */
-	flp->type = SDLA_UNKNOWN;
-	flp->state = 0;
-   
-	for(i=1;i<SDLA_IO_EXTENTS;i++)
-		if (inb(base + i) != 0xFF)
-			break;
-
-	if (i == SDLA_IO_EXTENTS) {   
-		outb(SDLA_HALT, base + SDLA_REG_Z80_CONTROL);
-		if ((inb(base + SDLA_S502_STS) & 0x0F) == 0x08) {
-			outb(SDLA_S502E_INTACK, base + SDLA_REG_CONTROL);
-			if ((inb(base + SDLA_S502_STS) & 0x0F) == 0x0C) {
-				outb(SDLA_HALT, base + SDLA_REG_CONTROL);
-				flp->type = SDLA_S502E;
-				goto got_type;
-			}
-		}
-	}
-
-	for(byte=inb(base),i=0;i<SDLA_IO_EXTENTS;i++)
-		if (inb(base + i) != byte)
-			break;
-
-	if (i == SDLA_IO_EXTENTS) {
-		outb(SDLA_HALT, base + SDLA_REG_CONTROL);
-		if ((inb(base + SDLA_S502_STS) & 0x7E) == 0x30) {
-			outb(SDLA_S507_ENABLE, base + SDLA_REG_CONTROL);
-			if ((inb(base + SDLA_S502_STS) & 0x7E) == 0x32) {
-				outb(SDLA_HALT, base + SDLA_REG_CONTROL);
-				flp->type = SDLA_S507;
-				goto got_type;
-			}
-		}
-	}
-
-	outb(SDLA_HALT, base + SDLA_REG_CONTROL);
-	if ((inb(base + SDLA_S508_STS) & 0x3F) == 0x00) {
-		outb(SDLA_S508_INTEN, base + SDLA_REG_CONTROL);
-		if ((inb(base + SDLA_S508_STS) & 0x3F) == 0x10) {
-			outb(SDLA_HALT, base + SDLA_REG_CONTROL);
-			flp->type = SDLA_S508;
-			goto got_type;
-		}
-	}
-
-	outb(SDLA_S502A_HALT, base + SDLA_REG_CONTROL);
-	if (inb(base + SDLA_S502_STS) == 0x40) {
-		outb(SDLA_S502A_START, base + SDLA_REG_CONTROL);
-		if (inb(base + SDLA_S502_STS) == 0x40) {
-			outb(SDLA_S502A_INTEN, base + SDLA_REG_CONTROL);
-			if (inb(base + SDLA_S502_STS) == 0x44) {
-				outb(SDLA_S502A_START, base + SDLA_REG_CONTROL);
-				flp->type = SDLA_S502A;
-				goto got_type;
-			}
-		}
-	}
-
-	netdev_notice(dev, "Unknown card type\n");
-	err = -ENODEV;
-	goto fail;
-
-got_type:
-	switch(base) {
-		case 0x270:
-		case 0x280:
-		case 0x380: 
-		case 0x390:
-			if (flp->type != SDLA_S508 && flp->type != SDLA_S507)
-				goto fail;
-	}
-
-	switch (map->irq) {
-		case 2:
-			if (flp->type != SDLA_S502E)
-				goto fail;
-			break;
-
-		case 10:
-		case 11:
-		case 12:
-		case 15:
-		case 4:
-			if (flp->type != SDLA_S508 && flp->type != SDLA_S507)
-				goto fail;
-			break;
-		case 3:
-		case 5:
-		case 7:
-			if (flp->type == SDLA_S502A)
-				goto fail;
-			break;
-
-		default:
-			goto fail;
-	}
-
-	err = -EAGAIN;
-	if (request_irq(dev->irq, sdla_isr, 0, dev->name, dev)) 
-		goto fail;
-
-	if (flp->type == SDLA_S507) {
-		switch(dev->irq) {
-			case 3:
-				flp->state = SDLA_S507_IRQ3;
-				break;
-			case 4:
-				flp->state = SDLA_S507_IRQ4;
-				break;
-			case 5:
-				flp->state = SDLA_S507_IRQ5;
-				break;
-			case 7:
-				flp->state = SDLA_S507_IRQ7;
-				break;
-			case 10:
-				flp->state = SDLA_S507_IRQ10;
-				break;
-			case 11:
-				flp->state = SDLA_S507_IRQ11;
-				break;
-			case 12:
-				flp->state = SDLA_S507_IRQ12;
-				break;
-			case 15:
-				flp->state = SDLA_S507_IRQ15;
-				break;
-		}
-	}
-
-	for(i=0; i < ARRAY_SIZE(valid_mem); i++)
-		if (valid_mem[i] == map->mem_start)
-			break;   
-
-	err = -EINVAL;
-	if (i == ARRAY_SIZE(valid_mem))
-		goto fail2;
-
-	if (flp->type == SDLA_S502A && (map->mem_start & 0xF000) >> 12 == 0x0E)
-		goto fail2;
-
-	if (flp->type != SDLA_S507 && map->mem_start >> 16 == 0x0B)
-		goto fail2;
-
-	if (flp->type == SDLA_S507 && map->mem_start >> 16 == 0x0D)
-		goto fail2;
-
-	byte = flp->type != SDLA_S508 ? SDLA_8K_WINDOW : 0;
-	byte |= (map->mem_start & 0xF000) >> (12 + (flp->type == SDLA_S508 ? 1 : 0));
-	switch(flp->type) {
-		case SDLA_S502A:
-		case SDLA_S502E:
-			switch (map->mem_start >> 16) {
-				case 0x0A:
-					byte |= SDLA_S502_SEG_A;
-					break;
-				case 0x0C:
-					byte |= SDLA_S502_SEG_C;
-					break;
-				case 0x0D:
-					byte |= SDLA_S502_SEG_D;
-					break;
-				case 0x0E:
-					byte |= SDLA_S502_SEG_E;
-					break;
-			}
-			break;
-		case SDLA_S507:
-			switch (map->mem_start >> 16) {
-				case 0x0A:
-					byte |= SDLA_S507_SEG_A;
-					break;
-				case 0x0B:
-					byte |= SDLA_S507_SEG_B;
-					break;
-				case 0x0C:
-					byte |= SDLA_S507_SEG_C;
-					break;
-				case 0x0E:
-					byte |= SDLA_S507_SEG_E;
-					break;
-			}
-			break;
-		case SDLA_S508:
-			switch (map->mem_start >> 16) {
-				case 0x0A:
-					byte |= SDLA_S508_SEG_A;
-					break;
-				case 0x0C:
-					byte |= SDLA_S508_SEG_C;
-					break;
-				case 0x0D:
-					byte |= SDLA_S508_SEG_D;
-					break;
-				case 0x0E:
-					byte |= SDLA_S508_SEG_E;
-					break;
-			}
-			break;
-	}
-
-	/* set the memory bits, and enable access */
-	outb(byte, base + SDLA_REG_PC_WINDOW);
-
-	switch(flp->type)
-	{
-		case SDLA_S502E:
-			flp->state = SDLA_S502E_ENABLE;
-			break;
-		case SDLA_S507:
-			flp->state |= SDLA_MEMEN;
-			break;
-		case SDLA_S508:
-			flp->state = SDLA_MEMEN;
-			break;
-	}
-	outb(flp->state, base + SDLA_REG_CONTROL);
-
-	dev->irq = map->irq;
-	dev->base_addr = base;
-	dev->mem_start = map->mem_start;
-	dev->mem_end = dev->mem_start + 0x2000;
-	flp->initialized = 1;
-	return 0;
-
-fail2:
-	free_irq(map->irq, dev);
-fail:
-	release_region(base, SDLA_IO_EXTENTS);
-	return err;
-}
- 
-static const struct net_device_ops sdla_netdev_ops = {
-	.ndo_open	= sdla_open,
-	.ndo_stop	= sdla_close,
-	.ndo_do_ioctl	= sdla_ioctl,
-	.ndo_set_config	= sdla_set_config,
-	.ndo_start_xmit	= sdla_transmit,
-	.ndo_change_mtu	= sdla_change_mtu,
-};
-
-static void setup_sdla(struct net_device *dev)
-{
-	struct frad_local *flp = netdev_priv(dev);
-
-	netdev_boot_setup_check(dev);
-
-	dev->netdev_ops		= &sdla_netdev_ops;
-	dev->flags		= 0;
-	dev->type		= 0xFFFF;
-	dev->hard_header_len	= 0;
-	dev->addr_len		= 0;
-	dev->mtu		= SDLA_MAX_MTU;
-
-	flp->activate		= sdla_activate;
-	flp->deactivate		= sdla_deactivate;
-	flp->assoc		= sdla_assoc;
-	flp->deassoc		= sdla_deassoc;
-	flp->dlci_conf		= sdla_dlci_conf;
-	flp->dev		= dev;
-
-	timer_setup(&flp->timer, sdla_poll, 0);
-	flp->timer.expires	= 1;
-}
-
-static struct net_device *sdla;
-
-static int __init init_sdla(void)
-{
-	int err;
-
-	printk("%s.\n", version);
-
-	sdla = alloc_netdev(sizeof(struct frad_local), "sdla0",
-			    NET_NAME_UNKNOWN, setup_sdla);
-	if (!sdla) 
-		return -ENOMEM;
-
-	err = register_netdev(sdla);
-	if (err) 
-		free_netdev(sdla);
-
-	return err;
-}
-
-static void __exit exit_sdla(void)
-{
-	struct frad_local *flp = netdev_priv(sdla);
-
-	unregister_netdev(sdla);
-	if (flp->initialized) {
-		free_irq(sdla->irq, sdla);
-		release_region(sdla->base_addr, SDLA_IO_EXTENTS);
-	}
-	del_timer_sync(&flp->timer);
-	free_netdev(sdla);
-}
-
-MODULE_LICENSE("GPL");
-
-module_init(init_sdla);
-module_exit(exit_sdla);
diff --git a/include/Kbuild b/include/Kbuild
index ffba79483cc5..64ab3aac7379 100644
--- a/include/Kbuild
+++ b/include/Kbuild
@@ -205,7 +205,6 @@ header-test-			+= linux/i3c/master.h
 header-test-			+= linux/i8042.h
 header-test-			+= linux/ide.h
 header-test-			+= linux/idle_inject.h
-header-test-			+= linux/if_frad.h
 header-test-			+= linux/if_rmnet.h
 header-test-			+= linux/if_tap.h
 header-test-			+= linux/iio/accel/kxcjk_1013.h
diff --git a/include/linux/if_frad.h b/include/linux/if_frad.h
deleted file mode 100644
index 52224de798aa..000000000000
--- a/include/linux/if_frad.h
+++ /dev/null
@@ -1,92 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * DLCI/FRAD	Definitions for Frame Relay Access Devices.  DLCI devices are
- *		created for each DLCI associated with a FRAD.  The FRAD driver
- *		is not truly a network device, but the lower level device
- *		handler.  This allows other FRAD manufacturers to use the DLCI
- *		code, including its RFC1490 encapsulation alongside the current
- *		implementation for the Sangoma cards.
- *
- * Version:	@(#)if_ifrad.h	0.15	31 Mar 96
- *
- * Author:	Mike McLagan <mike.mclagan@linux.org>
- *
- * Changes:
- *		0.15	Mike McLagan	changed structure defs (packed)
- *					re-arranged flags
- *					added DLCI_RET vars
- */
-#ifndef _FRAD_H_
-#define _FRAD_H_
-
-#include <uapi/linux/if_frad.h>
-
-
-#if defined(CONFIG_DLCI) || defined(CONFIG_DLCI_MODULE)
-
-/* these are the fields of an RFC 1490 header */
-struct frhdr
-{
-   unsigned char  control;
-
-   /* for IP packets, this can be the NLPID */
-   unsigned char  pad;
-
-   unsigned char  NLPID;
-   unsigned char  OUI[3];
-   __be16 PID;
-
-#define IP_NLPID pad 
-} __packed;
-
-/* see RFC 1490 for the definition of the following */
-#define FRAD_I_UI		0x03
-
-#define FRAD_P_PADDING		0x00
-#define FRAD_P_Q933		0x08
-#define FRAD_P_SNAP		0x80
-#define FRAD_P_CLNP		0x81
-#define FRAD_P_IP		0xCC
-
-struct dlci_local
-{
-   struct net_device      *master;
-   struct net_device      *slave;
-   struct dlci_conf       config;
-   int                    configured;
-   struct list_head	  list;
-
-   /* callback function */
-   void              (*receive)(struct sk_buff *skb, struct net_device *);
-};
-
-struct frad_local
-{
-   /* devices which this FRAD is slaved to */
-   struct net_device     *master[CONFIG_DLCI_MAX];
-   short             dlci[CONFIG_DLCI_MAX];
-
-   struct frad_conf  config;
-   int               configured;	/* has this device been configured */
-   int               initialized;	/* mem_start, port, irq set ? */
-
-   /* callback functions */
-   int               (*activate)(struct net_device *, struct net_device *);
-   int               (*deactivate)(struct net_device *, struct net_device *);
-   int               (*assoc)(struct net_device *, struct net_device *);
-   int               (*deassoc)(struct net_device *, struct net_device *);
-   int               (*dlci_conf)(struct net_device *, struct net_device *, int get);
-
-   /* fields that are used by the Sangoma SDLA cards */
-   struct timer_list timer;
-   struct net_device *dev;
-   int               type;		/* adapter type */
-   int               state;		/* state of the S502/8 control latch */
-   int               buffer;		/* current buffer for S508 firmware */
-};
-
-#endif /* CONFIG_DLCI || CONFIG_DLCI_MODULE */
-
-extern void dlci_ioctl_set(int (*hook)(unsigned int, void __user *));
-
-#endif
diff --git a/include/linux/sdla.h b/include/linux/sdla.h
deleted file mode 100644
index 00e8b3b614f0..000000000000
--- a/include/linux/sdla.h
+++ /dev/null
@@ -1,240 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * INET		An implementation of the TCP/IP protocol suite for the LINUX
- *		operating system.  INET is implemented using the  BSD Socket
- *		interface as the means of communication with the user level.
- *
- *		Global definitions for the Frame relay interface.
- *
- * Version:	@(#)if_ifrad.h	0.20	13 Apr 96
- *
- * Author:	Mike McLagan <mike.mclagan@linux.org>
- *
- * Changes:
- *		0.15	Mike McLagan	Structure packing
- *
- *		0.20	Mike McLagan	New flags for S508 buffer handling
- */
-#ifndef SDLA_H
-#define SDLA_H
-
-#include <uapi/linux/sdla.h>
-
-
-/* important Z80 window addresses */
-#define SDLA_CONTROL_WND		0xE000
-
-#define SDLA_502_CMD_BUF		0xEF60
-#define SDLA_502_RCV_BUF		0xA900
-#define	SDLA_502_TXN_AVAIL		0xFFF1
-#define SDLA_502_RCV_AVAIL		0xFFF2
-#define SDLA_502_EVENT_FLAGS		0xFFF3
-#define SDLA_502_MDM_STATUS		0xFFF4
-#define SDLA_502_IRQ_INTERFACE		0xFFFD
-#define SDLA_502_IRQ_PERMISSION		0xFFFE
-#define SDLA_502_DATA_OFS		0x0010
-
-#define SDLA_508_CMD_BUF		0xE000
-#define SDLA_508_TXBUF_INFO		0xF100
-#define SDLA_508_RXBUF_INFO		0xF120
-#define SDLA_508_EVENT_FLAGS		0xF003
-#define SDLA_508_MDM_STATUS		0xF004
-#define SDLA_508_IRQ_INTERFACE		0xF010
-#define SDLA_508_IRQ_PERMISSION		0xF011
-#define SDLA_508_TSE_OFFSET		0xF012
-
-/* Event flags */
-#define SDLA_EVENT_STATUS		0x01
-#define SDLA_EVENT_DLCI_STATUS		0x02
-#define SDLA_EVENT_BAD_DLCI		0x04
-#define SDLA_EVENT_LINK_DOWN		0x40
-
-/* IRQ Trigger flags */
-#define SDLA_INTR_RX			0x01
-#define SDLA_INTR_TX			0x02
-#define SDLA_INTR_MODEM			0x04
-#define SDLA_INTR_COMPLETE		0x08
-#define SDLA_INTR_STATUS		0x10
-#define SDLA_INTR_TIMER			0x20
-
-/* DLCI status bits */
-#define SDLA_DLCI_DELETED		0x01
-#define SDLA_DLCI_ACTIVE		0x02
-#define SDLA_DLCI_WAITING		0x04
-#define SDLA_DLCI_NEW			0x08
-#define SDLA_DLCI_INCLUDED		0x40
-
-/* valid command codes */
-#define	SDLA_INFORMATION_WRITE		0x01
-#define	SDLA_INFORMATION_READ		0x02
-#define SDLA_ISSUE_IN_CHANNEL_SIGNAL	0x03
-#define	SDLA_SET_DLCI_CONFIGURATION	0x10
-#define	SDLA_READ_DLCI_CONFIGURATION	0x11
-#define	SDLA_DISABLE_COMMUNICATIONS	0x12
-#define	SDLA_ENABLE_COMMUNICATIONS	0x13
-#define	SDLA_READ_DLC_STATUS		0x14
-#define	SDLA_READ_DLC_STATISTICS	0x15
-#define	SDLA_FLUSH_DLC_STATISTICS	0x16
-#define	SDLA_LIST_ACTIVE_DLCI		0x17
-#define	SDLA_FLUSH_INFORMATION_BUFFERS	0x18
-#define	SDLA_ADD_DLCI			0x20
-#define	SDLA_DELETE_DLCI		0x21
-#define	SDLA_ACTIVATE_DLCI		0x22
-#define	SDLA_DEACTIVATE_DLCI		0x23
-#define	SDLA_READ_MODEM_STATUS		0x30
-#define	SDLA_SET_MODEM_STATUS		0x31
-#define	SDLA_READ_COMMS_ERR_STATS	0x32
-#define SDLA_FLUSH_COMMS_ERR_STATS	0x33
-#define	SDLA_READ_CODE_VERSION		0x40
-#define SDLA_SET_IRQ_TRIGGER		0x50
-#define SDLA_GET_IRQ_TRIGGER		0x51
-
-/* In channel signal types */
-#define SDLA_ICS_LINK_VERIFY		0x02
-#define SDLA_ICS_STATUS_ENQ		0x03
-
-/* modem status flags */
-#define SDLA_MODEM_DTR_HIGH		0x01
-#define SDLA_MODEM_RTS_HIGH		0x02
-#define SDLA_MODEM_DCD_HIGH		0x08
-#define SDLA_MODEM_CTS_HIGH		0x20
-
-/* used for RET_MODEM interpretation */
-#define SDLA_MODEM_DCD_LOW		0x01
-#define SDLA_MODEM_CTS_LOW		0x02
-
-/* return codes */
-#define SDLA_RET_OK			0x00
-#define SDLA_RET_COMMUNICATIONS		0x01
-#define SDLA_RET_CHANNEL_INACTIVE	0x02
-#define SDLA_RET_DLCI_INACTIVE		0x03
-#define SDLA_RET_DLCI_CONFIG		0x04
-#define SDLA_RET_BUF_TOO_BIG		0x05
-#define SDLA_RET_NO_DATA		0x05
-#define SDLA_RET_BUF_OVERSIZE		0x06
-#define SDLA_RET_CIR_OVERFLOW		0x07
-#define SDLA_RET_NO_BUFS		0x08
-#define SDLA_RET_TIMEOUT		0x0A
-#define SDLA_RET_MODEM			0x10
-#define SDLA_RET_CHANNEL_OFF		0x11
-#define SDLA_RET_CHANNEL_ON		0x12
-#define SDLA_RET_DLCI_STATUS		0x13
-#define SDLA_RET_DLCI_UNKNOWN       	0x14
-#define SDLA_RET_COMMAND_INVALID    	0x1F
-
-/* Configuration flags */
-#define SDLA_DIRECT_RECV		0x0080
-#define SDLA_TX_NO_EXCEPT		0x0020
-#define SDLA_NO_ICF_MSGS		0x1000
-#define SDLA_TX50_RX50			0x0000
-#define SDLA_TX70_RX30			0x2000
-#define SDLA_TX30_RX70			0x4000
-
-/* IRQ selection flags */
-#define SDLA_IRQ_RECEIVE		0x01
-#define SDLA_IRQ_TRANSMIT		0x02
-#define SDLA_IRQ_MODEM_STAT		0x04
-#define SDLA_IRQ_COMMAND		0x08
-#define SDLA_IRQ_CHANNEL		0x10
-#define SDLA_IRQ_TIMER			0x20
-
-/* definitions for PC memory mapping */
-#define SDLA_8K_WINDOW			0x01
-#define SDLA_S502_SEG_A			0x10
-#define SDLA_S502_SEG_C			0x20
-#define SDLA_S502_SEG_D			0x00
-#define SDLA_S502_SEG_E			0x30
-#define SDLA_S507_SEG_A			0x00
-#define SDLA_S507_SEG_B			0x40
-#define SDLA_S507_SEG_C			0x80
-#define SDLA_S507_SEG_E			0xC0
-#define SDLA_S508_SEG_A			0x00
-#define SDLA_S508_SEG_C			0x10
-#define SDLA_S508_SEG_D			0x08
-#define SDLA_S508_SEG_E			0x18
-
-/* SDLA adapter port constants */
-#define SDLA_IO_EXTENTS			0x04
-	
-#define SDLA_REG_CONTROL		0x00
-#define SDLA_REG_PC_WINDOW		0x01	/* offset for PC window select latch */
-#define SDLA_REG_Z80_WINDOW 		0x02	/* offset for Z80 window select latch */
-#define SDLA_REG_Z80_CONTROL		0x03	/* offset for Z80 control latch */
-	
-#define SDLA_S502_STS			0x00	/* status reg for 502, 502E, 507 */
-#define SDLA_S508_GNRL			0x00	/* general purp. reg for 508 */
-#define SDLA_S508_STS			0x01	/* status reg for 508 */
-#define SDLA_S508_IDR			0x02	/* ID reg for 508 */
-	
-/* control register flags */
-#define SDLA_S502A_START		0x00	/* start the CPU */
-#define SDLA_S502A_INTREQ		0x02
-#define SDLA_S502A_INTEN		0x04
-#define SDLA_S502A_HALT			0x08	/* halt the CPU */	
-#define SDLA_S502A_NMI			0x10	/* issue an NMI to the CPU */
-
-#define SDLA_S502E_CPUEN		0x01
-#define SDLA_S502E_ENABLE		0x02
-#define SDLA_S502E_INTACK		0x04
-	
-#define SDLA_S507_ENABLE		0x01
-#define SDLA_S507_IRQ3			0x00
-#define SDLA_S507_IRQ4			0x20
-#define SDLA_S507_IRQ5			0x40
-#define SDLA_S507_IRQ7			0x60
-#define SDLA_S507_IRQ10			0x80
-#define SDLA_S507_IRQ11			0xA0
-#define SDLA_S507_IRQ12			0xC0
-#define SDLA_S507_IRQ15			0xE0
-	
-#define SDLA_HALT			0x00
-#define SDLA_CPUEN			0x02
-#define SDLA_MEMEN			0x04
-#define SDLA_S507_EPROMWR		0x08
-#define SDLA_S507_EPROMCLK		0x10
-#define SDLA_S508_INTRQ			0x08
-#define SDLA_S508_INTEN			0x10
-
-struct sdla_cmd {
-   char  opp_flag;
-   char  cmd;
-   short length;
-   char  retval;
-   short dlci;
-   char  flags;
-   short rxlost_int;
-   long  rxlost_app;
-   char  reserve[2];
-   char  data[SDLA_MAX_DATA];	/* transfer data buffer */
-} __attribute__((packed));
-
-struct intr_info {
-   char  flags;
-   short txlen;
-   char  irq;
-   char  flags2;
-   short timeout;
-} __attribute__((packed));
-
-/* found in the 508's control window at RXBUF_INFO */
-struct buf_info {
-   unsigned short rse_num;
-   unsigned long  rse_base;
-   unsigned long  rse_next;
-   unsigned long  buf_base;
-   unsigned short reserved;
-   unsigned long  buf_top;
-} __attribute__((packed));
-
-/* structure pointed to by rse_base in RXBUF_INFO struct */
-struct buf_entry {
-   char  opp_flag;
-   short length;
-   short dlci;
-   char  flags;
-   short timestamp;
-   short reserved[2];
-   long  buf_addr;
-} __attribute__((packed));
-
-#endif
diff --git a/include/uapi/linux/if_frad.h b/include/uapi/linux/if_frad.h
deleted file mode 100644
index 3c6ee85f6262..000000000000
--- a/include/uapi/linux/if_frad.h
+++ /dev/null
@@ -1,123 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */
-/*
- * DLCI/FRAD	Definitions for Frame Relay Access Devices.  DLCI devices are
- *		created for each DLCI associated with a FRAD.  The FRAD driver
- *		is not truly a network device, but the lower level device
- *		handler.  This allows other FRAD manufacturers to use the DLCI
- *		code, including its RFC1490 encapsulation alongside the current
- *		implementation for the Sangoma cards.
- *
- * Version:	@(#)if_ifrad.h	0.15	31 Mar 96
- *
- * Author:	Mike McLagan <mike.mclagan@linux.org>
- *
- * Changes:
- *		0.15	Mike McLagan	changed structure defs (packed)
- *					re-arranged flags
- *					added DLCI_RET vars
- *
- *		This program is free software; you can redistribute it and/or
- *		modify it under the terms of the GNU General Public License
- *		as published by the Free Software Foundation; either version
- *		2 of the License, or (at your option) any later version.
- */
-
-#ifndef _UAPI_FRAD_H_
-#define _UAPI_FRAD_H_
-
-#include <linux/if.h>
-
-/* Structures and constants associated with the DLCI device driver */
-
-struct dlci_add
-{
-   char  devname[IFNAMSIZ];
-   short dlci;
-};
-
-#define DLCI_GET_CONF	(SIOCDEVPRIVATE + 2)
-#define DLCI_SET_CONF	(SIOCDEVPRIVATE + 3)
-
-/* 
- * These are related to the Sangoma SDLA and should remain in order. 
- * Code within the SDLA module is based on the specifics of this 
- * structure.  Change at your own peril.
- */
-struct dlci_conf {
-   short flags;
-   short CIR_fwd;
-   short Bc_fwd;
-   short Be_fwd;
-   short CIR_bwd;
-   short Bc_bwd;
-   short Be_bwd; 
-
-/* these are part of the status read */
-   short Tc_fwd;
-   short Tc_bwd;
-   short Tf_max;
-   short Tb_max;
-
-/* add any new fields here above is a mirror of sdla_dlci_conf */
-};
-
-#define DLCI_GET_SLAVE	(SIOCDEVPRIVATE + 4)
-
-/* configuration flags for DLCI */
-#define DLCI_IGNORE_CIR_OUT	0x0001
-#define DLCI_ACCOUNT_CIR_IN	0x0002
-#define DLCI_BUFFER_IF		0x0008
-
-#define DLCI_VALID_FLAGS	0x000B
-
-/* defines for the actual Frame Relay hardware */
-#define FRAD_GET_CONF	(SIOCDEVPRIVATE)
-#define FRAD_SET_CONF	(SIOCDEVPRIVATE + 1)
-
-#define FRAD_LAST_IOCTL	FRAD_SET_CONF
-
-/*
- * Based on the setup for the Sangoma SDLA.  If changes are 
- * necessary to this structure, a routine will need to be 
- * added to that module to copy fields.
- */
-struct frad_conf 
-{
-   short station;
-   short flags;
-   short kbaud;
-   short clocking;
-   short mtu;
-   short T391;
-   short T392;
-   short N391;
-   short N392;
-   short N393;
-   short CIR_fwd;
-   short Bc_fwd;
-   short Be_fwd;
-   short CIR_bwd;
-   short Bc_bwd;
-   short Be_bwd;
-
-/* Add new fields here, above is a mirror of the sdla_conf */
-
-};
-
-#define FRAD_STATION_CPE	0x0000
-#define FRAD_STATION_NODE	0x0001
-
-#define FRAD_TX_IGNORE_CIR	0x0001
-#define FRAD_RX_ACCOUNT_CIR	0x0002
-#define FRAD_DROP_ABORTED	0x0004
-#define FRAD_BUFFERIF		0x0008
-#define FRAD_STATS		0x0010
-#define FRAD_MCI		0x0100
-#define FRAD_AUTODLCI		0x8000
-#define FRAD_VALID_FLAGS	0x811F
-
-#define FRAD_CLOCK_INT		0x0001
-#define FRAD_CLOCK_EXT		0x0000
-
-
-#endif /* _UAPI_FRAD_H_ */
diff --git a/include/uapi/linux/sdla.h b/include/uapi/linux/sdla.h
deleted file mode 100644
index 1e3735be6511..000000000000
--- a/include/uapi/linux/sdla.h
+++ /dev/null
@@ -1,117 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */
-/*
- * INET		An implementation of the TCP/IP protocol suite for the LINUX
- *		operating system.  INET is implemented using the  BSD Socket
- *		interface as the means of communication with the user level.
- *
- *		Global definitions for the Frame relay interface.
- *
- * Version:	@(#)if_ifrad.h	0.20	13 Apr 96
- *
- * Author:	Mike McLagan <mike.mclagan@linux.org>
- *
- * Changes:
- *		0.15	Mike McLagan	Structure packing
- *
- *		0.20	Mike McLagan	New flags for S508 buffer handling
- *
- *		This program is free software; you can redistribute it and/or
- *		modify it under the terms of the GNU General Public License
- *		as published by the Free Software Foundation; either version
- *		2 of the License, or (at your option) any later version.
- */
-
-#ifndef _UAPISDLA_H
-#define _UAPISDLA_H
-
-/* adapter type */
-#define SDLA_TYPES
-#define SDLA_S502A			5020
-#define SDLA_S502E			5021
-#define SDLA_S503			5030
-#define SDLA_S507			5070
-#define SDLA_S508			5080
-#define SDLA_S509			5090
-#define SDLA_UNKNOWN			-1
-
-/* port selection flags for the S508 */
-#define SDLA_S508_PORT_V35		0x00
-#define SDLA_S508_PORT_RS232		0x02
-
-/* Z80 CPU speeds */
-#define SDLA_CPU_3M			0x00
-#define SDLA_CPU_5M			0x01
-#define SDLA_CPU_7M			0x02
-#define SDLA_CPU_8M			0x03
-#define SDLA_CPU_10M			0x04
-#define SDLA_CPU_16M			0x05
-#define SDLA_CPU_12M			0x06
-
-/* some private IOCTLs */
-#define SDLA_IDENTIFY			(FRAD_LAST_IOCTL + 1)
-#define SDLA_CPUSPEED			(FRAD_LAST_IOCTL + 2)
-#define SDLA_PROTOCOL			(FRAD_LAST_IOCTL + 3)
-
-#define SDLA_CLEARMEM			(FRAD_LAST_IOCTL + 4)
-#define SDLA_WRITEMEM			(FRAD_LAST_IOCTL + 5)
-#define SDLA_READMEM			(FRAD_LAST_IOCTL + 6)
-
-struct sdla_mem {
-   int  addr;
-   int  len;
-   void __user *data;
-};
-
-#define SDLA_START			(FRAD_LAST_IOCTL + 7)
-#define SDLA_STOP			(FRAD_LAST_IOCTL + 8)
-
-/* some offsets in the Z80's memory space */
-#define SDLA_NMIADDR			0x0000
-#define SDLA_CONF_ADDR			0x0010
-#define SDLA_S502A_NMIADDR		0x0066
-#define SDLA_CODE_BASEADDR		0x0100
-#define SDLA_WINDOW_SIZE		0x2000
-#define SDLA_ADDR_MASK			0x1FFF
-
-/* largest handleable block of data */
-#define SDLA_MAX_DATA			4080
-#define SDLA_MAX_MTU			4072	/* MAX_DATA - sizeof(fradhdr) */
-#define SDLA_MAX_DLCI			24
-
-/* this should be the same as frad_conf */
-struct sdla_conf {
-   short station;
-   short config;
-   short kbaud;
-   short clocking;
-   short max_frm;
-   short T391;
-   short T392;
-   short N391;
-   short N392;
-   short N393;
-   short CIR_fwd;
-   short Bc_fwd;
-   short Be_fwd;
-   short CIR_bwd;
-   short Bc_bwd;
-   short Be_bwd;
-};
-
-/* this should be the same as dlci_conf */
-struct sdla_dlci_conf {
-   short config;
-   short CIR_fwd;
-   short Bc_fwd;
-   short Be_fwd;
-   short CIR_bwd;
-   short Bc_bwd;
-   short Be_bwd; 
-   short Tc_fwd;
-   short Tc_bwd;
-   short Tf_max;
-   short Tb_max;
-};
-
-
-#endif /* _UAPISDLA_H */
diff --git a/net/socket.c b/net/socket.c
index 250dda239a15..ac3ad20953c4 100644
--- a/net/socket.c
+++ b/net/socket.c
@@ -64,7 +64,6 @@
 #include <linux/seq_file.h>
 #include <linux/mutex.h>
 #include <linux/if_bridge.h>
-#include <linux/if_frad.h>
 #include <linux/if_vlan.h>
 #include <linux/ptp_classify.h>
 #include <linux/init.h>
@@ -1019,17 +1018,6 @@ void vlan_ioctl_set(int (*hook) (struct net *, void __user *))
 }
 EXPORT_SYMBOL(vlan_ioctl_set);
 
-static DEFINE_MUTEX(dlci_ioctl_mutex);
-static int (*dlci_ioctl_hook) (unsigned int, void __user *);
-
-void dlci_ioctl_set(int (*hook) (unsigned int, void __user *))
-{
-	mutex_lock(&dlci_ioctl_mutex);
-	dlci_ioctl_hook = hook;
-	mutex_unlock(&dlci_ioctl_mutex);
-}
-EXPORT_SYMBOL(dlci_ioctl_set);
-
 static long sock_do_ioctl(struct net *net, struct socket *sock,
 			  unsigned int cmd, unsigned long arg)
 {
@@ -1148,17 +1136,6 @@ static long sock_ioctl(struct file *file, unsigned cmd, unsigned long arg)
 				err = vlan_ioctl_hook(net, argp);
 			mutex_unlock(&vlan_ioctl_mutex);
 			break;
-		case SIOCADDDLCI:
-		case SIOCDELDLCI:
-			err = -ENOPKG;
-			if (!dlci_ioctl_hook)
-				request_module("dlci");
-
-			mutex_lock(&dlci_ioctl_mutex);
-			if (dlci_ioctl_hook)
-				err = dlci_ioctl_hook(cmd, argp);
-			mutex_unlock(&dlci_ioctl_mutex);
-			break;
 		case SIOCGSKNS:
 			err = -EPERM;
 			if (!ns_capable(net->user_ns, CAP_NET_ADMIN))
@@ -3403,8 +3380,6 @@ static int compat_sock_ioctl_trans(struct file *file, struct socket *sock,
 	case SIOCBRDELBR:
 	case SIOCGIFVLAN:
 	case SIOCSIFVLAN:
-	case SIOCADDDLCI:
-	case SIOCDELDLCI:
 	case SIOCGSKNS:
 	case SIOCGSTAMP_NEW:
 	case SIOCGSTAMPNS_NEW:
-- 
2.20.0


^ permalink raw reply	[flat|nested] 12+ messages in thread

* [PATCH 4/4] [RFC] staging/net: move AF_X25 into drivers/staging
  2019-12-09 15:12 [PATCH 1/4] [net-next] wan: remove stale Kconfig entries Arnd Bergmann
  2019-12-09 15:12 ` [PATCH 2/4] [net-next] wan: remove sbni/granch driver Arnd Bergmann
  2019-12-09 15:12 ` [PATCH 3/4] [net-next] wan: remove old frame relay driver Arnd Bergmann
@ 2019-12-09 15:12 ` Arnd Bergmann
  2019-12-09 15:41   ` Greg Kroah-Hartman
                     ` (2 more replies)
  2 siblings, 3 replies; 12+ messages in thread
From: Arnd Bergmann @ 2019-12-09 15:12 UTC (permalink / raw)
  To: David S. Miller, Krzysztof Halasa
  Cc: Greg Kroah-Hartman, devel, netdev, Arnd Bergmann, linux-kernel,
	Eric Biggers, Andrew Hendry, linux-x25, Kevin Curtis, R.J.Dunlop,
	Zhao Qiang, syzbot+429c200ffc8772bfe070,
	syzbot+eec0c87f31a7c3b66f7b

syzbot keeps finding issues in the X.25 implementation that nobody is
interested in fixing.  Given that all the x25 patches of the past years
that are not global cleanups tend to fix user-triggered oopses, is it
time to just retire the subsystem?

I looked a bit closer and found:

- we used to support x25 hardware in linux, but with WAN_ROUTER
  removed in linux-3.9 and isdn4linux removed in 5.3, there is only hdlc,
  ethernet and the N_X25 tty ldisc left. Out of these, only HDLC_X25 made
  it beyond the experimental stage, so this is probably what everyone
  uses if there are users at all.

- The most common hdlc hardware that people seem to be using are
  the "farsync" PCIe and USB adapters. Linux only has drivers for the
  older PCI devices from that series, but no hardware that works on
  modern systems.

- The manufacturer still updates their own kernel drivers and provides
  support, but ships that with a fork or rewrite of the subsystem
  code now.  Kevin Curtis is also listed as maintainer, but appears to
  have given up in 2013 after [1].

- The most popular software implementation appears to be X25 over TCP
  (XOT), which is supported by Farsite and other out-of-tree stacks but
  never had an implementation in mainline.

- Most other supported HDLC hardware that we supoprt is for the ISA or
  PCI buses. There are newer PCIe or USB devices, but those all require
  a custom device driver and often a custom subsystem, none of which got
  submitted for mainline inclusion. This includes hardware from Microgate
  (SyncLink), Comtrol (RocketPort Express) and Sealevel (SeaMAC).

- The X.25 subsystem is listed as "odd fixes", but the last reply on
  the netdev mailing list from the maintainer was also in 2013[2].

- The HDLC subsystem itself is listed as maintained by Krzysztof Halasa,
  and there were new drivers merged for SoC based devices as late as
  2016 by Zhao Qiang: Freescale/NXP QUICC Engine and Maxim ds26522.
  There has not been much work on HDLC or drivers/net/wan recently,
  but both developers are still responsive on the mailing list and
  work on other parts of the kernel.

Based on the above, I would conclude that X.25 can probably get moved
to staging as keeping it in the kernel seems to do more harm than good,
but HDLC below it should probably stay as there it seems there are still
users of a small subset of the mainline drivers.

Move all of X.25 into drivers/staging for now, with a projected removal
date set for Linux-5.8.

Cc: Eric Biggers <ebiggers@kernel.org>
Cc: Andrew Hendry <andrew.hendry@gmail.com>
Cc: linux-x25@vger.kernel.org
Cc: Kevin Curtis <kevin.curtis@farsite.com>
Cc: "R.J.Dunlop" <bob.dunlop@farsite.com>
Cc: Zhao Qiang <qiang.zhao@nxp.com>
Cc: Krzysztof Halasa <khc@pm.waw.pl>
Reported-by: syzbot+429c200ffc8772bfe070@syzkaller.appspotmail.com
Reported-by: syzbot+eec0c87f31a7c3b66f7b@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?id=5b0ecf0386f56be7fe7210a14d0f62df765c0c39
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
----

If anyone has different views or additional information, let us know.

If you agree with the above, please Ack.
---
 MAINTAINERS                                   |  8 +-
 drivers/net/wan/Kconfig                       | 43 --------
 drivers/net/wan/Makefile                      |  3 -
 drivers/staging/Kconfig                       |  2 +
 drivers/staging/Makefile                      |  2 +
 .../x25/Documentation}/lapb-module.txt        |  0
 .../staging/x25/Documentation}/x25-iface.txt  |  0
 .../staging/x25/Documentation}/x25.txt        |  0
 drivers/staging/x25/Kconfig                   | 97 +++++++++++++++++++
 {net => drivers/staging}/x25/Makefile         |  8 ++
 drivers/staging/x25/TODO                      | 15 +++
 {net => drivers/staging}/x25/af_x25.c         |  2 +-
 drivers/{net/wan => staging/x25}/hdlc_x25.c   |  2 +-
 {include/net => drivers/staging/x25}/lapb.h   |  2 +-
 .../lapb => drivers/staging/x25}/lapb_iface.c |  2 +-
 {net/lapb => drivers/staging/x25}/lapb_in.c   |  2 +-
 {net/lapb => drivers/staging/x25}/lapb_out.c  |  2 +-
 {net/lapb => drivers/staging/x25}/lapb_subr.c |  2 +-
 .../lapb => drivers/staging/x25}/lapb_timer.c |  2 +-
 drivers/{net/wan => staging/x25}/lapbether.c  |  2 +-
 .../staging/x25/linux-lapb.h                  |  0
 {net => drivers/staging}/x25/sysctl_net_x25.c |  2 +-
 .../x25.h => drivers/staging/x25/uapi-x25.h   |  0
 {include/net => drivers/staging/x25}/x25.h    |  2 +-
 drivers/{net/wan => staging/x25}/x25_asy.c    |  2 +-
 drivers/{net/wan => staging/x25}/x25_asy.h    |  0
 {net => drivers/staging}/x25/x25_dev.c        |  2 +-
 {net => drivers/staging}/x25/x25_facilities.c |  2 +-
 {net => drivers/staging}/x25/x25_forward.c    |  2 +-
 {net => drivers/staging}/x25/x25_in.c         |  2 +-
 {net => drivers/staging}/x25/x25_link.c       |  2 +-
 {net => drivers/staging}/x25/x25_out.c        |  2 +-
 {net => drivers/staging}/x25/x25_proc.c       |  2 +-
 {net => drivers/staging}/x25/x25_route.c      |  2 +-
 {net => drivers/staging}/x25/x25_subr.c       |  2 +-
 {net => drivers/staging}/x25/x25_timer.c      |  2 +-
 include/Kbuild                                |  2 -
 net/Kconfig                                   |  2 -
 net/Makefile                                  |  2 -
 net/lapb/Kconfig                              | 22 -----
 net/lapb/Makefile                             |  8 --
 net/x25/Kconfig                               | 34 -------
 42 files changed, 148 insertions(+), 144 deletions(-)
 rename {Documentation/networking => drivers/staging/x25/Documentation}/lapb-module.txt (100%)
 rename {Documentation/networking => drivers/staging/x25/Documentation}/x25-iface.txt (100%)
 rename {Documentation/networking => drivers/staging/x25/Documentation}/x25.txt (100%)
 create mode 100644 drivers/staging/x25/Kconfig
 rename {net => drivers/staging}/x25/Makefile (58%)
 create mode 100644 drivers/staging/x25/TODO
 rename {net => drivers/staging}/x25/af_x25.c (99%)
 rename drivers/{net/wan => staging/x25}/hdlc_x25.c (99%)
 rename {include/net => drivers/staging/x25}/lapb.h (99%)
 rename {net/lapb => drivers/staging/x25}/lapb_iface.c (99%)
 rename {net/lapb => drivers/staging/x25}/lapb_in.c (99%)
 rename {net/lapb => drivers/staging/x25}/lapb_out.c (99%)
 rename {net/lapb => drivers/staging/x25}/lapb_subr.c (99%)
 rename {net/lapb => drivers/staging/x25}/lapb_timer.c (99%)
 rename drivers/{net/wan => staging/x25}/lapbether.c (99%)
 rename include/linux/lapb.h => drivers/staging/x25/linux-lapb.h (100%)
 rename {net => drivers/staging}/x25/sysctl_net_x25.c (98%)
 rename include/uapi/linux/x25.h => drivers/staging/x25/uapi-x25.h (100%)
 rename {include/net => drivers/staging/x25}/x25.h (99%)
 rename drivers/{net/wan => staging/x25}/x25_asy.c (99%)
 rename drivers/{net/wan => staging/x25}/x25_asy.h (100%)
 rename {net => drivers/staging}/x25/x25_dev.c (99%)
 rename {net => drivers/staging}/x25/x25_facilities.c (99%)
 rename {net => drivers/staging}/x25/x25_forward.c (99%)
 rename {net => drivers/staging}/x25/x25_in.c (99%)
 rename {net => drivers/staging}/x25/x25_link.c (99%)
 rename {net => drivers/staging}/x25/x25_out.c (99%)
 rename {net => drivers/staging}/x25/x25_proc.c (99%)
 rename {net => drivers/staging}/x25/x25_route.c (99%)
 rename {net => drivers/staging}/x25/x25_subr.c (99%)
 rename {net => drivers/staging}/x25/x25_timer.c (99%)
 delete mode 100644 net/lapb/Kconfig
 delete mode 100644 net/lapb/Makefile
 delete mode 100644 net/x25/Kconfig

diff --git a/MAINTAINERS b/MAINTAINERS
index 32fab6fbd301..5f0786bd8e22 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -9155,9 +9155,7 @@ F:	drivers/soc/lantiq
 LAPB module
 L:	linux-x25@vger.kernel.org
 S:	Orphan
-F:	Documentation/networking/lapb-module.txt
-F:	include/*/lapb.h
-F:	net/lapb/
+F:	drivers/staging/x25/
 
 LASI 53c700 driver for PARISC
 M:	"James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
@@ -17645,9 +17643,7 @@ X.25 NETWORK LAYER
 M:	Andrew Hendry <andrew.hendry@gmail.com>
 L:	linux-x25@vger.kernel.org
 S:	Odd Fixes
-F:	Documentation/networking/x25*
-F:	include/net/x25*
-F:	net/x25/
+F:	drivers/staging/x25/
 
 X86 ARCHITECTURE (32-BIT AND 64-BIT)
 M:	Thomas Gleixner <tglx@linutronix.de>
diff --git a/drivers/net/wan/Kconfig b/drivers/net/wan/Kconfig
index 74f2bd639b07..931457129b3b 100644
--- a/drivers/net/wan/Kconfig
+++ b/drivers/net/wan/Kconfig
@@ -156,17 +156,6 @@ config HDLC_PPP
 
 	  If unsure, say N.
 
-config HDLC_X25
-	tristate "X.25 protocol support"
-	depends on HDLC && (LAPB=m && HDLC=m || LAPB=y)
-	help
-	  Generic HDLC driver supporting X.25 over WAN connections.
-
-	  If unsure, say N.
-
-comment "X.25/LAPB support is disabled"
-	depends on HDLC && (LAPB!=m || HDLC!=m) && LAPB!=y
-
 config PCI200SYN
 	tristate "Goramo PCI200SYN support"
 	depends on HDLC && PCI
@@ -297,36 +286,4 @@ config IXP4XX_HSS
 	  Say Y here if you want to use built-in HSS ports
 	  on IXP4xx processor.
 
-# X.25 network drivers
-config LAPBETHER
-	tristate "LAPB over Ethernet driver"
-	depends on LAPB && X25
-	---help---
-	  Driver for a pseudo device (typically called /dev/lapb0) which allows
-	  you to open an LAPB point-to-point connection to some other computer
-	  on your Ethernet network.
-
-	  In order to do this, you need to say Y or M to the driver for your
-	  Ethernet card as well as to "LAPB Data Link Driver".
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called lapbether.
-
-	  If unsure, say N.
-
-config X25_ASY
-	tristate "X.25 async driver"
-	depends on LAPB && X25 && TTY
-	---help---
-	  Send and receive X.25 frames over regular asynchronous serial
-	  lines such as telephone lines equipped with ordinary modems.
-
-	  Experts should note that this driver doesn't currently comply with
-	  the asynchronous HDLS framing protocols in CCITT recommendation X.25.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called x25_asy.
-
-	  If unsure, say N.
-
 endif # WAN
diff --git a/drivers/net/wan/Makefile b/drivers/net/wan/Makefile
index 4438a0c4a272..1eb30941a445 100644
--- a/drivers/net/wan/Makefile
+++ b/drivers/net/wan/Makefile
@@ -12,17 +12,14 @@ obj-$(CONFIG_HDLC_RAW_ETH)	+= hdlc_raw_eth.o
 obj-$(CONFIG_HDLC_CISCO)	+= hdlc_cisco.o
 obj-$(CONFIG_HDLC_FR)		+= hdlc_fr.o
 obj-$(CONFIG_HDLC_PPP)		+= hdlc_ppp.o
-obj-$(CONFIG_HDLC_X25)		+= hdlc_x25.o
 
 obj-$(CONFIG_HOSTESS_SV11)	+= z85230.o	hostess_sv11.o
 obj-$(CONFIG_SEALEVEL_4021)	+= z85230.o	sealevel.o
 obj-$(CONFIG_COSA)		+= cosa.o
 obj-$(CONFIG_FARSYNC)		+= farsync.o
-obj-$(CONFIG_X25_ASY)		+= x25_asy.o
 
 obj-$(CONFIG_LANMEDIA)		+= lmc/
 
-obj-$(CONFIG_LAPBETHER)		+= lapbether.o
 obj-$(CONFIG_N2)		+= n2.o
 obj-$(CONFIG_C101)		+= c101.o
 obj-$(CONFIG_WANXL)		+= wanxl.o
diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig
index ab83326f4b7e..e2edb29ccb42 100644
--- a/drivers/staging/Kconfig
+++ b/drivers/staging/Kconfig
@@ -123,4 +123,6 @@ source "drivers/staging/exfat/Kconfig"
 
 source "drivers/staging/qlge/Kconfig"
 
+source "drivers/staging/x25/Kconfig"
+
 endif # STAGING
diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile
index dfddb9864b2e..0576784f1f11 100644
--- a/drivers/staging/Makefile
+++ b/drivers/staging/Makefile
@@ -52,3 +52,5 @@ obj-$(CONFIG_UWB)		+= uwb/
 obj-$(CONFIG_USB_WUSB)		+= wusbcore/
 obj-$(CONFIG_EXFAT_FS)		+= exfat/
 obj-$(CONFIG_QLGE)		+= qlge/
+obj-$(CONFIG_X25)		+= x25/
+obj-$(CONFIG_LAPB)		+= x25/
diff --git a/Documentation/networking/lapb-module.txt b/drivers/staging/x25/Documentation/lapb-module.txt
similarity index 100%
rename from Documentation/networking/lapb-module.txt
rename to drivers/staging/x25/Documentation/lapb-module.txt
diff --git a/Documentation/networking/x25-iface.txt b/drivers/staging/x25/Documentation/x25-iface.txt
similarity index 100%
rename from Documentation/networking/x25-iface.txt
rename to drivers/staging/x25/Documentation/x25-iface.txt
diff --git a/Documentation/networking/x25.txt b/drivers/staging/x25/Documentation/x25.txt
similarity index 100%
rename from Documentation/networking/x25.txt
rename to drivers/staging/x25/Documentation/x25.txt
diff --git a/drivers/staging/x25/Kconfig b/drivers/staging/x25/Kconfig
new file mode 100644
index 000000000000..18724b747a9e
--- /dev/null
+++ b/drivers/staging/x25/Kconfig
@@ -0,0 +1,97 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# CCITT X.25 Packet Layer
+#
+
+config X25
+	tristate "CCITT X.25 Packet Layer"
+	depends on NET
+	---help---
+	  X.25 is a set of standardized network protocols, similar in scope to
+	  frame relay; the one physical line from your box to the X.25 network
+	  entry point can carry several logical point-to-point connections
+	  (called "virtual circuits") to other computers connected to the X.25
+	  network. Governments, banks, and other organizations tend to use it
+	  to connect to each other or to form Wide Area Networks (WANs). Many
+	  countries have public X.25 networks. X.25 consists of two
+	  protocols: the higher level Packet Layer Protocol (PLP) (say Y here
+	  if you want that) and the lower level data link layer protocol LAPB
+	  (say Y to "LAPB Data Link Driver" below if you want that).
+
+	  You can read more about X.25 at <http://www.sangoma.com/tutorials/x25/> and
+	  <http://docwiki.cisco.com/wiki/X.25>.
+	  Information about X.25 for Linux is contained in the files
+	  <file:Documentation/networking/x25.txt> and
+	  <file:Documentation/networking/x25-iface.txt>.
+
+	  One connects to an X.25 network either with a dedicated network card
+	  using the X.21 protocol (not yet supported by Linux) or one can do
+	  X.25 over a standard telephone line using an ordinary modem (say Y
+	  to "X.25 async driver" below) or over Ethernet using an ordinary
+	  Ethernet card and the LAPB over Ethernet (say Y to "LAPB Data Link
+	  Driver" and "LAPB over Ethernet driver" below).
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called x25. If unsure, say N.
+
+config LAPB
+	tristate "LAPB  Data Link Driver"
+	depends on NET
+	---help---
+	  Link Access Procedure, Balanced (LAPB) is the data link layer (i.e.
+	  the lower) part of the X.25 protocol. It offers a reliable
+	  connection service to exchange data frames with one other host, and
+	  it is used to transport higher level protocols (mostly X.25 Packet
+	  Layer, the higher part of X.25, but others are possible as well).
+	  Usually, LAPB is used with specialized X.21 network cards, but Linux
+	  currently supports LAPB only over Ethernet connections. If you want
+	  to use LAPB connections over Ethernet, say Y here and to "LAPB over
+	  Ethernet driver" below. Read
+	  <file:Documentation/networking/lapb-module.txt> for technical
+	  details.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called lapb.  If unsure, say N.
+
+config HDLC_X25
+	tristate "X.25 protocol support"
+	depends on HDLC && (LAPB=m && HDLC=m || LAPB=y)
+	help
+	  Generic HDLC driver supporting X.25 over WAN connections.
+
+	  If unsure, say N.
+
+comment "X.25/LAPB support is disabled"
+	depends on HDLC && (LAPB!=m || HDLC!=m) && LAPB!=y
+
+# X.25 network drivers
+config LAPBETHER
+	tristate "LAPB over Ethernet driver"
+	depends on LAPB && X25
+	---help---
+	  Driver for a pseudo device (typically called /dev/lapb0) which allows
+	  you to open an LAPB point-to-point connection to some other computer
+	  on your Ethernet network.
+
+	  In order to do this, you need to say Y or M to the driver for your
+	  Ethernet card as well as to "LAPB Data Link Driver".
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called lapbether.
+
+	  If unsure, say N.
+
+config X25_ASY
+	tristate "X.25 async driver"
+	depends on LAPB && X25 && TTY
+	---help---
+	  Send and receive X.25 frames over regular asynchronous serial
+	  lines such as telephone lines equipped with ordinary modems.
+
+	  Experts should note that this driver doesn't currently comply with
+	  the asynchronous HDLS framing protocols in CCITT recommendation X.25.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called x25_asy.
+
+	  If unsure, say N.
diff --git a/net/x25/Makefile b/drivers/staging/x25/Makefile
similarity index 58%
rename from net/x25/Makefile
rename to drivers/staging/x25/Makefile
index 5dd544a231f2..d8235ac6b015 100644
--- a/net/x25/Makefile
+++ b/drivers/staging/x25/Makefile
@@ -9,3 +9,11 @@ x25-y			:= af_x25.o x25_dev.o x25_facilities.o x25_in.o \
 			   x25_link.o x25_out.o x25_route.o x25_subr.o \
 			   x25_timer.o x25_proc.o x25_forward.o
 x25-$(CONFIG_SYSCTL)	+= sysctl_net_x25.o
+
+obj-$(CONFIG_LAPB) += lapb.o
+
+lapb-y := lapb_in.o lapb_out.o lapb_subr.o lapb_timer.o lapb_iface.o
+
+obj-$(CONFIG_HDLC_X25)		+= hdlc_x25.o
+obj-$(CONFIG_X25_ASY)		+= x25_asy.o
+obj-$(CONFIG_LAPBETHER)		+= lapbether.o
diff --git a/drivers/staging/x25/TODO b/drivers/staging/x25/TODO
new file mode 100644
index 000000000000..bb42cf474ca1
--- /dev/null
+++ b/drivers/staging/x25/TODO
@@ -0,0 +1,15 @@
+Staging out of X.25
+===================
+
+It appears that the X.25 socket family is not used any more with the
+mainline kernel, and the git log shows a series of user-triggerable
+Oopses.
+
+https://www.farsite.com/ still makes hardware that is being used in the
+field, but that uses a custom out of tree protocol stack in place of
+the kernel's AF_X25.
+
+If there are remaining users of this code that I missed, it can be moved
+out back out of staging, otherwise it will be removed in linux-5.8.
+
+    Arnd Bergmann <arnd@arndb.de>
diff --git a/net/x25/af_x25.c b/drivers/staging/x25/af_x25.c
similarity index 99%
rename from net/x25/af_x25.c
rename to drivers/staging/x25/af_x25.c
index 6aee9f5e8e71..be950682209d 100644
--- a/net/x25/af_x25.c
+++ b/drivers/staging/x25/af_x25.c
@@ -54,7 +54,7 @@
 #include <linux/compat.h>
 #include <linux/ctype.h>
 
-#include <net/x25.h>
+#include "x25.h"
 #include <net/compat.h>
 
 int sysctl_x25_restart_request_timeout = X25_DEFAULT_T20;
diff --git a/drivers/net/wan/hdlc_x25.c b/drivers/staging/x25/hdlc_x25.c
similarity index 99%
rename from drivers/net/wan/hdlc_x25.c
rename to drivers/staging/x25/hdlc_x25.c
index 5643675ff724..32ccf0c8e040 100644
--- a/drivers/net/wan/hdlc_x25.c
+++ b/drivers/staging/x25/hdlc_x25.c
@@ -13,7 +13,7 @@
 #include <linux/inetdevice.h>
 #include <linux/init.h>
 #include <linux/kernel.h>
-#include <linux/lapb.h>
+#include "linux-lapb.h"
 #include <linux/module.h>
 #include <linux/pkt_sched.h>
 #include <linux/poll.h>
diff --git a/include/net/lapb.h b/drivers/staging/x25/lapb.h
similarity index 99%
rename from include/net/lapb.h
rename to drivers/staging/x25/lapb.h
index ccc3d1f020b0..2abab6266caf 100644
--- a/include/net/lapb.h
+++ b/drivers/staging/x25/lapb.h
@@ -1,8 +1,8 @@
 /* SPDX-License-Identifier: GPL-2.0 */
 #ifndef _LAPB_H
 #define _LAPB_H 
-#include <linux/lapb.h>
 #include <linux/refcount.h>
+#include "linux-lapb.h"
 
 #define	LAPB_HEADER_LEN	20		/* LAPB over Ethernet + a bit more */
 
diff --git a/net/lapb/lapb_iface.c b/drivers/staging/x25/lapb_iface.c
similarity index 99%
rename from net/lapb/lapb_iface.c
rename to drivers/staging/x25/lapb_iface.c
index 3c03f6512c5f..1231ae28ec64 100644
--- a/net/lapb/lapb_iface.c
+++ b/drivers/staging/x25/lapb_iface.c
@@ -34,7 +34,7 @@
 #include <linux/interrupt.h>
 #include <linux/stat.h>
 #include <linux/init.h>
-#include <net/lapb.h>
+#include "lapb.h"
 
 static LIST_HEAD(lapb_list);
 static DEFINE_RWLOCK(lapb_list_lock);
diff --git a/net/lapb/lapb_in.c b/drivers/staging/x25/lapb_in.c
similarity index 99%
rename from net/lapb/lapb_in.c
rename to drivers/staging/x25/lapb_in.c
index 38ae23c09e83..210f8c743b39 100644
--- a/net/lapb/lapb_in.c
+++ b/drivers/staging/x25/lapb_in.c
@@ -30,7 +30,7 @@
 #include <linux/fcntl.h>
 #include <linux/mm.h>
 #include <linux/interrupt.h>
-#include <net/lapb.h>
+#include "lapb.h"
 
 /*
  *	State machine for state 0, Disconnected State.
diff --git a/net/lapb/lapb_out.c b/drivers/staging/x25/lapb_out.c
similarity index 99%
rename from net/lapb/lapb_out.c
rename to drivers/staging/x25/lapb_out.c
index 7a4d0715d1c3..d4ba7a5ebd33 100644
--- a/net/lapb/lapb_out.c
+++ b/drivers/staging/x25/lapb_out.c
@@ -28,7 +28,7 @@
 #include <linux/fcntl.h>
 #include <linux/mm.h>
 #include <linux/interrupt.h>
-#include <net/lapb.h>
+#include "lapb.h"
 
 /*
  *  This procedure is passed a buffer descriptor for an iframe. It builds
diff --git a/net/lapb/lapb_subr.c b/drivers/staging/x25/lapb_subr.c
similarity index 99%
rename from net/lapb/lapb_subr.c
rename to drivers/staging/x25/lapb_subr.c
index 592a22d86a97..f5ec7868c5a4 100644
--- a/net/lapb/lapb_subr.c
+++ b/drivers/staging/x25/lapb_subr.c
@@ -27,7 +27,7 @@
 #include <linux/fcntl.h>
 #include <linux/mm.h>
 #include <linux/interrupt.h>
-#include <net/lapb.h>
+#include "lapb.h"
 
 /*
  *	This routine purges all the queues of frames.
diff --git a/net/lapb/lapb_timer.c b/drivers/staging/x25/lapb_timer.c
similarity index 99%
rename from net/lapb/lapb_timer.c
rename to drivers/staging/x25/lapb_timer.c
index 8f5b17001a07..0b46163593e5 100644
--- a/net/lapb/lapb_timer.c
+++ b/drivers/staging/x25/lapb_timer.c
@@ -28,7 +28,7 @@
 #include <linux/fcntl.h>
 #include <linux/mm.h>
 #include <linux/interrupt.h>
-#include <net/lapb.h>
+#include "lapb.h"
 
 static void lapb_t1timer_expiry(struct timer_list *);
 static void lapb_t2timer_expiry(struct timer_list *);
diff --git a/drivers/net/wan/lapbether.c b/drivers/staging/x25/lapbether.c
similarity index 99%
rename from drivers/net/wan/lapbether.c
rename to drivers/staging/x25/lapbether.c
index 0f1217b506ad..6ff971705dca 100644
--- a/drivers/net/wan/lapbether.c
+++ b/drivers/staging/x25/lapbether.c
@@ -36,7 +36,7 @@
 #include <linux/notifier.h>
 #include <linux/stat.h>
 #include <linux/module.h>
-#include <linux/lapb.h>
+#include "linux-lapb.h"
 #include <linux/init.h>
 
 #include <net/x25device.h>
diff --git a/include/linux/lapb.h b/drivers/staging/x25/linux-lapb.h
similarity index 100%
rename from include/linux/lapb.h
rename to drivers/staging/x25/linux-lapb.h
diff --git a/net/x25/sysctl_net_x25.c b/drivers/staging/x25/sysctl_net_x25.c
similarity index 98%
rename from net/x25/sysctl_net_x25.c
rename to drivers/staging/x25/sysctl_net_x25.c
index e9802afa43d0..e8530a4e4856 100644
--- a/net/x25/sysctl_net_x25.c
+++ b/drivers/staging/x25/sysctl_net_x25.c
@@ -11,7 +11,7 @@
 #include <linux/socket.h>
 #include <linux/netdevice.h>
 #include <linux/init.h>
-#include <net/x25.h>
+#include "x25.h"
 
 static int min_timer[] = {   1 * HZ };
 static int max_timer[] = { 300 * HZ };
diff --git a/include/uapi/linux/x25.h b/drivers/staging/x25/uapi-x25.h
similarity index 100%
rename from include/uapi/linux/x25.h
rename to drivers/staging/x25/uapi-x25.h
diff --git a/include/net/x25.h b/drivers/staging/x25/x25.h
similarity index 99%
rename from include/net/x25.h
rename to drivers/staging/x25/x25.h
index ed1acc3044ac..dfbc0188e47d 100644
--- a/include/net/x25.h
+++ b/drivers/staging/x25/x25.h
@@ -10,10 +10,10 @@
 
 #ifndef _X25_H
 #define _X25_H 
-#include <linux/x25.h>
 #include <linux/slab.h>
 #include <linux/refcount.h>
 #include <net/sock.h>
+#include "uapi-x25.h"
 
 #define	X25_ADDR_LEN			16
 
diff --git a/drivers/net/wan/x25_asy.c b/drivers/staging/x25/x25_asy.c
similarity index 99%
rename from drivers/net/wan/x25_asy.c
rename to drivers/staging/x25/x25_asy.c
index 914be5847386..3986a1160fc1 100644
--- a/drivers/net/wan/x25_asy.c
+++ b/drivers/staging/x25/x25_asy.c
@@ -31,7 +31,7 @@
 #include <linux/etherdevice.h>
 #include <linux/skbuff.h>
 #include <linux/if_arp.h>
-#include <linux/lapb.h>
+#include "linux-lapb.h"
 #include <linux/init.h>
 #include <linux/rtnetlink.h>
 #include <linux/slab.h>
diff --git a/drivers/net/wan/x25_asy.h b/drivers/staging/x25/x25_asy.h
similarity index 100%
rename from drivers/net/wan/x25_asy.h
rename to drivers/staging/x25/x25_asy.h
diff --git a/net/x25/x25_dev.c b/drivers/staging/x25/x25_dev.c
similarity index 99%
rename from net/x25/x25_dev.c
rename to drivers/staging/x25/x25_dev.c
index 00e782335cb0..dbdce9c62abd 100644
--- a/net/x25/x25_dev.c
+++ b/drivers/staging/x25/x25_dev.c
@@ -20,7 +20,7 @@
 #include <linux/slab.h>
 #include <net/sock.h>
 #include <linux/if_arp.h>
-#include <net/x25.h>
+#include "x25.h"
 #include <net/x25device.h>
 
 static int x25_receive_data(struct sk_buff *skb, struct x25_neigh *nb)
diff --git a/net/x25/x25_facilities.c b/drivers/staging/x25/x25_facilities.c
similarity index 99%
rename from net/x25/x25_facilities.c
rename to drivers/staging/x25/x25_facilities.c
index 7fb327632272..17e41049cb2b 100644
--- a/net/x25/x25_facilities.c
+++ b/drivers/staging/x25/x25_facilities.c
@@ -22,7 +22,7 @@
 #include <linux/string.h>
 #include <linux/skbuff.h>
 #include <net/sock.h>
-#include <net/x25.h>
+#include "x25.h"
 
 /**
  * x25_parse_facilities - Parse facilities from skb into the facilities structs
diff --git a/net/x25/x25_forward.c b/drivers/staging/x25/x25_forward.c
similarity index 99%
rename from net/x25/x25_forward.c
rename to drivers/staging/x25/x25_forward.c
index c82999941d3f..4328f0e31482 100644
--- a/net/x25/x25_forward.c
+++ b/drivers/staging/x25/x25_forward.c
@@ -9,7 +9,7 @@
 #include <linux/if_arp.h>
 #include <linux/init.h>
 #include <linux/slab.h>
-#include <net/x25.h>
+#include "x25.h"
 
 LIST_HEAD(x25_forward_list);
 DEFINE_RWLOCK(x25_forward_list_lock);
diff --git a/net/x25/x25_in.c b/drivers/staging/x25/x25_in.c
similarity index 99%
rename from net/x25/x25_in.c
rename to drivers/staging/x25/x25_in.c
index f97c43344e95..e0c1f1484d8c 100644
--- a/net/x25/x25_in.c
+++ b/drivers/staging/x25/x25_in.c
@@ -27,7 +27,7 @@
 #include <linux/skbuff.h>
 #include <net/sock.h>
 #include <net/tcp_states.h>
-#include <net/x25.h>
+#include "x25.h"
 
 static int x25_queue_rx_frame(struct sock *sk, struct sk_buff *skb, int more)
 {
diff --git a/net/x25/x25_link.c b/drivers/staging/x25/x25_link.c
similarity index 99%
rename from net/x25/x25_link.c
rename to drivers/staging/x25/x25_link.c
index 7d02532aad0d..5c07143e557d 100644
--- a/net/x25/x25_link.c
+++ b/drivers/staging/x25/x25_link.c
@@ -26,7 +26,7 @@
 #include <linux/skbuff.h>
 #include <linux/uaccess.h>
 #include <linux/init.h>
-#include <net/x25.h>
+#include "x25.h"
 
 LIST_HEAD(x25_neigh_list);
 DEFINE_RWLOCK(x25_neigh_list_lock);
diff --git a/net/x25/x25_out.c b/drivers/staging/x25/x25_out.c
similarity index 99%
rename from net/x25/x25_out.c
rename to drivers/staging/x25/x25_out.c
index dbc0940bf35f..8f4d55e378ee 100644
--- a/net/x25/x25_out.c
+++ b/drivers/staging/x25/x25_out.c
@@ -23,7 +23,7 @@
 #include <linux/string.h>
 #include <linux/skbuff.h>
 #include <net/sock.h>
-#include <net/x25.h>
+#include "x25.h"
 
 static int x25_pacsize_to_bytes(unsigned int pacsize)
 {
diff --git a/net/x25/x25_proc.c b/drivers/staging/x25/x25_proc.c
similarity index 99%
rename from net/x25/x25_proc.c
rename to drivers/staging/x25/x25_proc.c
index 3bddcbdf2e40..4c36e64a719a 100644
--- a/net/x25/x25_proc.c
+++ b/drivers/staging/x25/x25_proc.c
@@ -18,7 +18,7 @@
 #include <linux/export.h>
 #include <net/net_namespace.h>
 #include <net/sock.h>
-#include <net/x25.h>
+#include "x25.h"
 
 #ifdef CONFIG_PROC_FS
 
diff --git a/net/x25/x25_route.c b/drivers/staging/x25/x25_route.c
similarity index 99%
rename from net/x25/x25_route.c
rename to drivers/staging/x25/x25_route.c
index b8e94d58d0f1..60f18964be0f 100644
--- a/net/x25/x25_route.c
+++ b/drivers/staging/x25/x25_route.c
@@ -15,7 +15,7 @@
 #include <linux/if_arp.h>
 #include <linux/init.h>
 #include <linux/slab.h>
-#include <net/x25.h>
+#include "x25.h"
 
 LIST_HEAD(x25_route_list);
 DEFINE_RWLOCK(x25_route_list_lock);
diff --git a/net/x25/x25_subr.c b/drivers/staging/x25/x25_subr.c
similarity index 99%
rename from net/x25/x25_subr.c
rename to drivers/staging/x25/x25_subr.c
index 8aa415a38814..7004ee53a6b0 100644
--- a/net/x25/x25_subr.c
+++ b/drivers/staging/x25/x25_subr.c
@@ -26,7 +26,7 @@
 #include <linux/skbuff.h>
 #include <net/sock.h>
 #include <net/tcp_states.h>
-#include <net/x25.h>
+#include "x25.h"
 
 /*
  *	This routine purges all of the queues of frames.
diff --git a/net/x25/x25_timer.c b/drivers/staging/x25/x25_timer.c
similarity index 99%
rename from net/x25/x25_timer.c
rename to drivers/staging/x25/x25_timer.c
index 9376365cdcc9..3edcae15f897 100644
--- a/net/x25/x25_timer.c
+++ b/drivers/staging/x25/x25_timer.c
@@ -19,7 +19,7 @@
 #include <linux/timer.h>
 #include <net/sock.h>
 #include <net/tcp_states.h>
-#include <net/x25.h>
+#include "x25.h"
 
 static void x25_heartbeat_expiry(struct timer_list *t);
 static void x25_timer_expiry(struct timer_list *t);
diff --git a/include/Kbuild b/include/Kbuild
index 64ab3aac7379..e26750d6ec96 100644
--- a/include/Kbuild
+++ b/include/Kbuild
@@ -276,7 +276,6 @@ header-test-			+= linux/kvm_host.h
 header-test-			+= linux/kvm_irqfd.h
 header-test-			+= linux/kvm_para.h
 header-test-			+= linux/lantiq.h
-header-test-			+= linux/lapb.h
 header-test-			+= linux/latencytop.h
 header-test-			+= linux/led-lm3530.h
 header-test-			+= linux/leds-bd2802.h
@@ -835,7 +834,6 @@ header-test-			+= net/ipcomp.h
 header-test-			+= net/ipconfig.h
 header-test-			+= net/iucv/af_iucv.h
 header-test-			+= net/iucv/iucv.h
-header-test-			+= net/lapb.h
 header-test-			+= net/llc_c_ac.h
 header-test-			+= net/llc_c_st.h
 header-test-			+= net/llc_s_ac.h
diff --git a/net/Kconfig b/net/Kconfig
index 3101bfcbdd7a..50681046ec03 100644
--- a/net/Kconfig
+++ b/net/Kconfig
@@ -220,8 +220,6 @@ source "net/8021q/Kconfig"
 source "net/decnet/Kconfig"
 source "net/llc/Kconfig"
 source "drivers/net/appletalk/Kconfig"
-source "net/x25/Kconfig"
-source "net/lapb/Kconfig"
 source "net/phonet/Kconfig"
 source "net/6lowpan/Kconfig"
 source "net/ieee802154/Kconfig"
diff --git a/net/Makefile b/net/Makefile
index 449fc0b221f8..3473e68e7abe 100644
--- a/net/Makefile
+++ b/net/Makefile
@@ -26,8 +26,6 @@ obj-$(CONFIG_NET_KEY)		+= key/
 obj-$(CONFIG_BRIDGE)		+= bridge/
 obj-$(CONFIG_NET_DSA)		+= dsa/
 obj-$(CONFIG_ATALK)		+= appletalk/
-obj-$(CONFIG_X25)		+= x25/
-obj-$(CONFIG_LAPB)		+= lapb/
 obj-$(CONFIG_NETROM)		+= netrom/
 obj-$(CONFIG_ROSE)		+= rose/
 obj-$(CONFIG_AX25)		+= ax25/
diff --git a/net/lapb/Kconfig b/net/lapb/Kconfig
deleted file mode 100644
index 6acfc999c952..000000000000
--- a/net/lapb/Kconfig
+++ /dev/null
@@ -1,22 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-#
-# LAPB Data Link Drive
-#
-
-config LAPB
-	tristate "LAPB Data Link Driver"
-	---help---
-	  Link Access Procedure, Balanced (LAPB) is the data link layer (i.e.
-	  the lower) part of the X.25 protocol. It offers a reliable
-	  connection service to exchange data frames with one other host, and
-	  it is used to transport higher level protocols (mostly X.25 Packet
-	  Layer, the higher part of X.25, but others are possible as well).
-	  Usually, LAPB is used with specialized X.21 network cards, but Linux
-	  currently supports LAPB only over Ethernet connections. If you want
-	  to use LAPB connections over Ethernet, say Y here and to "LAPB over
-	  Ethernet driver" below. Read
-	  <file:Documentation/networking/lapb-module.txt> for technical
-	  details.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called lapb.  If unsure, say N.
diff --git a/net/lapb/Makefile b/net/lapb/Makefile
deleted file mode 100644
index 7be91b4c0ca0..000000000000
--- a/net/lapb/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-#
-# Makefile for the Linux LAPB layer.
-#
-
-obj-$(CONFIG_LAPB) += lapb.o
-
-lapb-y := lapb_in.o lapb_out.o lapb_subr.o lapb_timer.o lapb_iface.o
diff --git a/net/x25/Kconfig b/net/x25/Kconfig
deleted file mode 100644
index 2ecb2e5e241e..000000000000
--- a/net/x25/Kconfig
+++ /dev/null
@@ -1,34 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-#
-# CCITT X.25 Packet Layer
-#
-
-config X25
-	tristate "CCITT X.25 Packet Layer"
-	---help---
-	  X.25 is a set of standardized network protocols, similar in scope to
-	  frame relay; the one physical line from your box to the X.25 network
-	  entry point can carry several logical point-to-point connections
-	  (called "virtual circuits") to other computers connected to the X.25
-	  network. Governments, banks, and other organizations tend to use it
-	  to connect to each other or to form Wide Area Networks (WANs). Many
-	  countries have public X.25 networks. X.25 consists of two
-	  protocols: the higher level Packet Layer Protocol (PLP) (say Y here
-	  if you want that) and the lower level data link layer protocol LAPB
-	  (say Y to "LAPB Data Link Driver" below if you want that).
-
-	  You can read more about X.25 at <http://www.sangoma.com/tutorials/x25/> and
-	  <http://docwiki.cisco.com/wiki/X.25>.
-	  Information about X.25 for Linux is contained in the files
-	  <file:Documentation/networking/x25.txt> and
-	  <file:Documentation/networking/x25-iface.txt>.
-
-	  One connects to an X.25 network either with a dedicated network card
-	  using the X.21 protocol (not yet supported by Linux) or one can do
-	  X.25 over a standard telephone line using an ordinary modem (say Y
-	  to "X.25 async driver" below) or over Ethernet using an ordinary
-	  Ethernet card and the LAPB over Ethernet (say Y to "LAPB Data Link
-	  Driver" and "LAPB over Ethernet driver" below).
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called x25. If unsure, say N.
-- 
2.20.0


^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: [PATCH 4/4] [RFC] staging/net: move AF_X25 into drivers/staging
  2019-12-09 15:12 ` [PATCH 4/4] [RFC] staging/net: move AF_X25 into drivers/staging Arnd Bergmann
@ 2019-12-09 15:41   ` Greg Kroah-Hartman
  2019-12-09 18:29   ` David Miller
  2019-12-11  7:10   ` Krzysztof Hałasa
  2 siblings, 0 replies; 12+ messages in thread
From: Greg Kroah-Hartman @ 2019-12-09 15:41 UTC (permalink / raw)
  To: Arnd Bergmann
  Cc: David S. Miller, Krzysztof Halasa, devel, netdev, linux-kernel,
	Eric Biggers, Andrew Hendry, linux-x25, Kevin Curtis, R.J.Dunlop,
	Zhao Qiang, syzbot+429c200ffc8772bfe070,
	syzbot+eec0c87f31a7c3b66f7b

On Mon, Dec 09, 2019 at 04:12:56PM +0100, Arnd Bergmann wrote:
> syzbot keeps finding issues in the X.25 implementation that nobody is
> interested in fixing.  Given that all the x25 patches of the past years
> that are not global cleanups tend to fix user-triggered oopses, is it
> time to just retire the subsystem?
> 
> I looked a bit closer and found:
> 
> - we used to support x25 hardware in linux, but with WAN_ROUTER
>   removed in linux-3.9 and isdn4linux removed in 5.3, there is only hdlc,
>   ethernet and the N_X25 tty ldisc left. Out of these, only HDLC_X25 made
>   it beyond the experimental stage, so this is probably what everyone
>   uses if there are users at all.
> 
> - The most common hdlc hardware that people seem to be using are
>   the "farsync" PCIe and USB adapters. Linux only has drivers for the
>   older PCI devices from that series, but no hardware that works on
>   modern systems.
> 
> - The manufacturer still updates their own kernel drivers and provides
>   support, but ships that with a fork or rewrite of the subsystem
>   code now.  Kevin Curtis is also listed as maintainer, but appears to
>   have given up in 2013 after [1].
> 
> - The most popular software implementation appears to be X25 over TCP
>   (XOT), which is supported by Farsite and other out-of-tree stacks but
>   never had an implementation in mainline.
> 
> - Most other supported HDLC hardware that we supoprt is for the ISA or
>   PCI buses. There are newer PCIe or USB devices, but those all require
>   a custom device driver and often a custom subsystem, none of which got
>   submitted for mainline inclusion. This includes hardware from Microgate
>   (SyncLink), Comtrol (RocketPort Express) and Sealevel (SeaMAC).
> 
> - The X.25 subsystem is listed as "odd fixes", but the last reply on
>   the netdev mailing list from the maintainer was also in 2013[2].
> 
> - The HDLC subsystem itself is listed as maintained by Krzysztof Halasa,
>   and there were new drivers merged for SoC based devices as late as
>   2016 by Zhao Qiang: Freescale/NXP QUICC Engine and Maxim ds26522.
>   There has not been much work on HDLC or drivers/net/wan recently,
>   but both developers are still responsive on the mailing list and
>   work on other parts of the kernel.
> 
> Based on the above, I would conclude that X.25 can probably get moved
> to staging as keeping it in the kernel seems to do more harm than good,
> but HDLC below it should probably stay as there it seems there are still
> users of a small subset of the mainline drivers.
> 
> Move all of X.25 into drivers/staging for now, with a projected removal
> date set for Linux-5.8.
> 
> Cc: Eric Biggers <ebiggers@kernel.org>
> Cc: Andrew Hendry <andrew.hendry@gmail.com>
> Cc: linux-x25@vger.kernel.org
> Cc: Kevin Curtis <kevin.curtis@farsite.com>
> Cc: "R.J.Dunlop" <bob.dunlop@farsite.com>
> Cc: Zhao Qiang <qiang.zhao@nxp.com>
> Cc: Krzysztof Halasa <khc@pm.waw.pl>
> Reported-by: syzbot+429c200ffc8772bfe070@syzkaller.appspotmail.com
> Reported-by: syzbot+eec0c87f31a7c3b66f7b@syzkaller.appspotmail.com
> Link: https://syzkaller.appspot.com/bug?id=5b0ecf0386f56be7fe7210a14d0f62df765c0c39
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
> ----
> 
> If anyone has different views or additional information, let us know.
> 
> If you agree with the above, please Ack.

ACK!

Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: [PATCH 4/4] [RFC] staging/net: move AF_X25 into drivers/staging
  2019-12-09 15:12 ` [PATCH 4/4] [RFC] staging/net: move AF_X25 into drivers/staging Arnd Bergmann
  2019-12-09 15:41   ` Greg Kroah-Hartman
@ 2019-12-09 18:29   ` David Miller
  2019-12-09 19:26     ` Arnd Bergmann
  2019-12-11  7:10   ` Krzysztof Hałasa
  2 siblings, 1 reply; 12+ messages in thread
From: David Miller @ 2019-12-09 18:29 UTC (permalink / raw)
  To: arnd
  Cc: khc, gregkh, devel, netdev, linux-kernel, ebiggers,
	andrew.hendry, linux-x25, kevin.curtis, bob.dunlop, qiang.zhao,
	syzbot+429c200ffc8772bfe070, syzbot+eec0c87f31a7c3b66f7b

From: Arnd Bergmann <arnd@arndb.de>
Date: Mon,  9 Dec 2019 16:12:56 +0100

> syzbot keeps finding issues in the X.25 implementation that nobody is
> interested in fixing.  Given that all the x25 patches of the past years
> that are not global cleanups tend to fix user-triggered oopses, is it
> time to just retire the subsystem?

I have a bug fix that I'm currently applying to 'net' right now actually:

	https://patchwork.ozlabs.org/patch/1205973/

So your proposal might be a bit premature.

^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: [PATCH 4/4] [RFC] staging/net: move AF_X25 into drivers/staging
  2019-12-09 18:29   ` David Miller
@ 2019-12-09 19:26     ` Arnd Bergmann
  2019-12-10  8:59       ` Martin Schiller
  0 siblings, 1 reply; 12+ messages in thread
From: Arnd Bergmann @ 2019-12-09 19:26 UTC (permalink / raw)
  To: David Miller
  Cc: khc, gregkh, driverdevel, Networking, linux-kernel, Eric Biggers,
	Andrew Hendry, linux-x25, Kevin Curtis, R.J.Dunlop, Qiang Zhao,
	Martin Schiller

On Mon, Dec 9, 2019 at 7:29 PM David Miller <davem@davemloft.net> wrote:
>
> From: Arnd Bergmann <arnd@arndb.de>
> Date: Mon,  9 Dec 2019 16:12:56 +0100
>
> > syzbot keeps finding issues in the X.25 implementation that nobody is
> > interested in fixing.  Given that all the x25 patches of the past years
> > that are not global cleanups tend to fix user-triggered oopses, is it
> > time to just retire the subsystem?
>
> I have a bug fix that I'm currently applying to 'net' right now actually:
>
>         https://patchwork.ozlabs.org/patch/1205973/
>
> So your proposal might be a bit premature.

Ok, makes sense. Looking back in the history, I also see other bugfixes
from the same author.

Adding Martin Schiller to Cc: for a few questions:

- What hardware are you using for X.25?
- Would you be available to be listed in the MAINTAINERS file
  as a contact for net/x25?
- Does your bug fix address the latest issue found by syzbot[1],
  or do you have an idea to fix it if not?

        Arnd

[1] https://lore.kernel.org/netdev/CAK8P3a0LdF+aQ1hnZrVKkNBQaum0WqW1jyR7_Eb+JRiwyHWr6Q@mail.gmail.com/

^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: [PATCH 4/4] [RFC] staging/net: move AF_X25 into drivers/staging
  2019-12-09 19:26     ` Arnd Bergmann
@ 2019-12-10  8:59       ` Martin Schiller
  2019-12-10 13:51         ` Arnd Bergmann
  0 siblings, 1 reply; 12+ messages in thread
From: Martin Schiller @ 2019-12-10  8:59 UTC (permalink / raw)
  To: Arnd Bergmann
  Cc: David Miller, khc, gregkh, driverdevel, Networking, linux-kernel,
	Eric Biggers, Andrew Hendry, linux-x25, Kevin Curtis, R.J.Dunlop,
	Qiang Zhao

On 2019-12-09 20:26, Arnd Bergmann wrote:
> On Mon, Dec 9, 2019 at 7:29 PM David Miller <davem@davemloft.net> 
> wrote:
>> 
>> From: Arnd Bergmann <arnd@arndb.de>
>> Date: Mon,  9 Dec 2019 16:12:56 +0100
>> 
>> > syzbot keeps finding issues in the X.25 implementation that nobody is
>> > interested in fixing.  Given that all the x25 patches of the past years
>> > that are not global cleanups tend to fix user-triggered oopses, is it
>> > time to just retire the subsystem?
>> 
>> I have a bug fix that I'm currently applying to 'net' right now 
>> actually:
>> 
>>         https://patchwork.ozlabs.org/patch/1205973/
>> 
>> So your proposal might be a bit premature.
> 
> Ok, makes sense. Looking back in the history, I also see other bugfixes
> from the same author.
> 
> Adding Martin Schiller to Cc: for a few questions:
> 
> - What hardware are you using for X.25?

I would say that X.25 is (at least in Germany) not dead yet. For 
example, it is
still used in the railway network of the Deutsche Bahn AG in many 
different
areas. [1]

We deliver products for this and use the Linux X.25 stack with some 
bugfixes
and extensions that I would like to get upstream.

As hardware/interfaces we use X.21bis/G.703 adapters, which are 
connected via
HDLC_X25 and LAPB. Also for this there are extensions and bugfixes, 
which I
would like to include in the kernel.

> - Would you be available to be listed in the MAINTAINERS file
>   as a contact for net/x25?

Yes, you can add me to the MAINTAINERS file.
I have only limited time, but I will try to follow all requests 
concerning this
subsystem.

> - Does your bug fix address the latest issue found by syzbot[1],
>   or do you have an idea to fix it if not?

I don't have a direct solution for the concrete problem mentioned above, 
but at
first sight I would say that the commit 95d6ebd53c79 ("net/x25: fix
use-after-free in x25_device_event()") holds the wrong lock 
(&x25_list_lock).
Shouldn't this be the lock &x25_neigh_list_lock as in x25_get_neigh(), 
where
x25_neigh_hold() is called?

> 
>         Arnd
> 
> [1]
> https://lore.kernel.org/netdev/CAK8P3a0LdF+aQ1hnZrVKkNBQaum0WqW1jyR7_Eb+JRiwyHWr6Q@mail.gmail.com/


^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: [PATCH 4/4] [RFC] staging/net: move AF_X25 into drivers/staging
  2019-12-10  8:59       ` Martin Schiller
@ 2019-12-10 13:51         ` Arnd Bergmann
  2019-12-11  5:58           ` Martin Schiller
  0 siblings, 1 reply; 12+ messages in thread
From: Arnd Bergmann @ 2019-12-10 13:51 UTC (permalink / raw)
  To: Martin Schiller
  Cc: David Miller, khc, gregkh, driverdevel, Networking, linux-kernel,
	Eric Biggers, Andrew Hendry, linux-x25, Kevin Curtis, R.J.Dunlop,
	Qiang Zhao

On Tue, Dec 10, 2019 at 9:59 AM Martin Schiller <ms@dev.tdt.de> wrote:
> On 2019-12-09 20:26, Arnd Bergmann wrote:
> > On Mon, Dec 9, 2019 at 7:29 PM David Miller <davem@davemloft.net>
> > wrote:
> >>
> >> From: Arnd Bergmann <arnd@arndb.de>
> >> Date: Mon,  9 Dec 2019 16:12:56 +0100
> >>
> >> > syzbot keeps finding issues in the X.25 implementation that nobody is
> >> > interested in fixing.  Given that all the x25 patches of the past years
> >> > that are not global cleanups tend to fix user-triggered oopses, is it
> >> > time to just retire the subsystem?
> >>
> >> I have a bug fix that I'm currently applying to 'net' right now
> >> actually:
> >>
> >>         https://patchwork.ozlabs.org/patch/1205973/
> >>
> >> So your proposal might be a bit premature.
> >
> > Ok, makes sense. Looking back in the history, I also see other bugfixes
> > from the same author.
> >
> > Adding Martin Schiller to Cc: for a few questions:
> >
> > - What hardware are you using for X.25?
>
> I would say that X.25 is (at least in Germany) not dead yet. For
> example, it is still used in the railway network of the Deutsche Bahn AG
> in many different areas. [1]
>
> We deliver products for this and use the Linux X.25 stack with some
> bugfixes and extensions that I would like to get upstream.

Right, when I looked for possible users, I found several examples
where X.25 is still relevant, my impression was just that none of those
were using the mainline Linux network stack.

Thank you for clarifying that.

> As hardware/interfaces we use X.21bis/G.703 adapters, which are
> connected via
> HDLC_X25 and LAPB. Also for this there are extensions and bugfixes,
> which I  would like to include in the kernel.

> > - Would you be available to be listed in the MAINTAINERS file
> >   as a contact for net/x25?
>
> Yes, you can add me to the MAINTAINERS file.
> I have only limited time, but I will try to follow all requests
> concerning this subsystem.

Great! I don't expect there to be a lot of work, but it definitely helps
to have someone who can look at the occasional build failure or
code cleanup patch.

If this works for everyone, I'd submit the following patch:

commit b63caa9a8d86a5bfc64052bf9aab9b22181120fd (HEAD)
Author: Arnd Bergmann <arnd@arndb.de>
Date:   Tue Dec 10 14:28:39 2019 +0100

    MAINTAINERS: add new X.25 maintainer

    Martin Schiller is using the Linux X.25 stack on top of HDLC and
    X.21 networks. He agreed to be listed as a maintainer to take
    care of odd fixes.

    Add him as the primary contact for net/x25 and net/lapb, as well
    as a reviewer for drivers/net/wan, which contains the HDLC code.

    Cc: Martin Schiller <ms@dev.tdt.de>
    Cc: Andrew Hendry <andrew.hendry@gmail.com>
    Cc: Krzysztof Halasa <khc@pm.waw.pl>
    Link: https://lore.kernel.org/netdev/407acd92c92c3ba04578da89b1a0f191@dev.tdt.de/
    Signed-off-by: Arnd Bergmann <arnd@arndb.de>

diff --git a/MAINTAINERS b/MAINTAINERS
index 8e58410a799a..00b624b96103 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -6889,6 +6889,7 @@ F:        Documentation/i2c/muxes/i2c-mux-gpio.rst

 GENERIC HDLC (WAN) DRIVERS
 M:     Krzysztof Halasa <khc@pm.waw.pl>
+R:     Martin Schiller <ms@dev.tdt.de>
 W:     http://www.kernel.org/pub/linux/utils/net/hdlc/
 S:     Maintained
 F:     drivers/net/wan/c101.c
@@ -9255,13 +9256,6 @@ S:       Maintained
 F:     arch/mips/lantiq
 F:     drivers/soc/lantiq

-LAPB module
-L:     linux-x25@vger.kernel.org
-S:     Orphan
-F:     Documentation/networking/lapb-module.txt
-F:     include/*/lapb.h
-F:     net/lapb/
-
 LASI 53c700 driver for PARISC
 M:     "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
 L:     linux-scsi@vger.kernel.org
@@ -17911,11 +17905,16 @@ S:    Maintained
 N:     axp[128]

 X.25 NETWORK LAYER
+M:     Martin Schiller <ms@dev.tdt.de>
 M:     Andrew Hendry <andrew.hendry@gmail.com>
 L:     linux-x25@vger.kernel.org
 S:     Odd Fixes
 F:     Documentation/networking/x25*
+F:     Documentation/networking/lapb-module.txt
+F:     include/linux/lapb.h
 F:     include/net/x25*
+F:     include/uapi/linux/x25.h
+F:     net/lapb/
 F:     net/x25/

 X86 ARCHITECTURE (32-BIT AND 64-BIT)

-----
> > - Does your bug fix address the latest issue found by syzbot[1],
> >   or do you have an idea to fix it if not?
>
> I don't have a direct solution for the concrete problem mentioned above,
> but at
> first sight I would say that the commit 95d6ebd53c79 ("net/x25: fix
> use-after-free in x25_device_event()") holds the wrong lock
> (&x25_list_lock).
> Shouldn't this be the lock &x25_neigh_list_lock as in x25_get_neigh(),
> where x25_neigh_hold() is called?

After looking at it again, my best guess is something else:
x25_wait_for_connection_establishment() calls release_sock()/lock_sock()
while waiting. At this point, a concurrent x25_connect() can
overwrite the x25->neighbour variable, which needs to be checked
again before calling x25_neigh_put().

      Arnd

^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: [PATCH 4/4] [RFC] staging/net: move AF_X25 into drivers/staging
  2019-12-10 13:51         ` Arnd Bergmann
@ 2019-12-11  5:58           ` Martin Schiller
  0 siblings, 0 replies; 12+ messages in thread
From: Martin Schiller @ 2019-12-11  5:58 UTC (permalink / raw)
  To: Arnd Bergmann
  Cc: David Miller, khc, gregkh, driverdevel, Networking, linux-kernel,
	Eric Biggers, Andrew Hendry, linux-x25, Kevin Curtis, R.J.Dunlop,
	Qiang Zhao

On 2019-12-10 14:51, Arnd Bergmann wrote:
> On Tue, Dec 10, 2019 at 9:59 AM Martin Schiller <ms@dev.tdt.de> wrote:
>> On 2019-12-09 20:26, Arnd Bergmann wrote:
>> > On Mon, Dec 9, 2019 at 7:29 PM David Miller <davem@davemloft.net>
>> > wrote:
>> >>
>> >> From: Arnd Bergmann <arnd@arndb.de>
>> >> Date: Mon,  9 Dec 2019 16:12:56 +0100
>> >>
>> >> > syzbot keeps finding issues in the X.25 implementation that nobody is
>> >> > interested in fixing.  Given that all the x25 patches of the past years
>> >> > that are not global cleanups tend to fix user-triggered oopses, is it
>> >> > time to just retire the subsystem?
>> >>
>> >> I have a bug fix that I'm currently applying to 'net' right now
>> >> actually:
>> >>
>> >>         https://patchwork.ozlabs.org/patch/1205973/
>> >>
>> >> So your proposal might be a bit premature.
>> >
>> > Ok, makes sense. Looking back in the history, I also see other bugfixes
>> > from the same author.
>> >
>> > Adding Martin Schiller to Cc: for a few questions:
>> >
>> > - What hardware are you using for X.25?
>> 
>> I would say that X.25 is (at least in Germany) not dead yet. For
>> example, it is still used in the railway network of the Deutsche Bahn 
>> AG
>> in many different areas. [1]
>> 
>> We deliver products for this and use the Linux X.25 stack with some
>> bugfixes and extensions that I would like to get upstream.
> 
> Right, when I looked for possible users, I found several examples
> where X.25 is still relevant, my impression was just that none of those
> were using the mainline Linux network stack.
> 
> Thank you for clarifying that.
> 
>> As hardware/interfaces we use X.21bis/G.703 adapters, which are
>> connected via
>> HDLC_X25 and LAPB. Also for this there are extensions and bugfixes,
>> which I  would like to include in the kernel.
> 
>> > - Would you be available to be listed in the MAINTAINERS file
>> >   as a contact for net/x25?
>> 
>> Yes, you can add me to the MAINTAINERS file.
>> I have only limited time, but I will try to follow all requests
>> concerning this subsystem.
> 
> Great! I don't expect there to be a lot of work, but it definitely 
> helps
> to have someone who can look at the occasional build failure or
> code cleanup patch.
> 
> If this works for everyone, I'd submit the following patch:
> 
> commit b63caa9a8d86a5bfc64052bf9aab9b22181120fd (HEAD)
> Author: Arnd Bergmann <arnd@arndb.de>
> Date:   Tue Dec 10 14:28:39 2019 +0100
> 
>     MAINTAINERS: add new X.25 maintainer
> 
>     Martin Schiller is using the Linux X.25 stack on top of HDLC and
>     X.21 networks. He agreed to be listed as a maintainer to take
>     care of odd fixes.
> 
>     Add him as the primary contact for net/x25 and net/lapb, as well
>     as a reviewer for drivers/net/wan, which contains the HDLC code.
> 
>     Cc: Martin Schiller <ms@dev.tdt.de>
>     Cc: Andrew Hendry <andrew.hendry@gmail.com>
>     Cc: Krzysztof Halasa <khc@pm.waw.pl>
>     Link:
> https://lore.kernel.org/netdev/407acd92c92c3ba04578da89b1a0f191@dev.tdt.de/
>     Signed-off-by: Arnd Bergmann <arnd@arndb.de>
> 

ACK!

Acked-by: Martin Schiller <ms@dev.tdt.de>

> diff --git a/MAINTAINERS b/MAINTAINERS
> index 8e58410a799a..00b624b96103 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -6889,6 +6889,7 @@ F:        
> Documentation/i2c/muxes/i2c-mux-gpio.rst
> 
>  GENERIC HDLC (WAN) DRIVERS
>  M:     Krzysztof Halasa <khc@pm.waw.pl>
> +R:     Martin Schiller <ms@dev.tdt.de>
>  W:     http://www.kernel.org/pub/linux/utils/net/hdlc/
>  S:     Maintained
>  F:     drivers/net/wan/c101.c
> @@ -9255,13 +9256,6 @@ S:       Maintained
>  F:     arch/mips/lantiq
>  F:     drivers/soc/lantiq
> 
> -LAPB module
> -L:     linux-x25@vger.kernel.org
> -S:     Orphan
> -F:     Documentation/networking/lapb-module.txt
> -F:     include/*/lapb.h
> -F:     net/lapb/
> -
>  LASI 53c700 driver for PARISC
>  M:     "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
>  L:     linux-scsi@vger.kernel.org
> @@ -17911,11 +17905,16 @@ S:    Maintained
>  N:     axp[128]
> 
>  X.25 NETWORK LAYER
> +M:     Martin Schiller <ms@dev.tdt.de>
>  M:     Andrew Hendry <andrew.hendry@gmail.com>
>  L:     linux-x25@vger.kernel.org
>  S:     Odd Fixes
>  F:     Documentation/networking/x25*
> +F:     Documentation/networking/lapb-module.txt
> +F:     include/linux/lapb.h
>  F:     include/net/x25*
> +F:     include/uapi/linux/x25.h
> +F:     net/lapb/
>  F:     net/x25/
> 
>  X86 ARCHITECTURE (32-BIT AND 64-BIT)
> 
> -----
>> > - Does your bug fix address the latest issue found by syzbot[1],
>> >   or do you have an idea to fix it if not?
>> 
>> I don't have a direct solution for the concrete problem mentioned 
>> above,
>> but at
>> first sight I would say that the commit 95d6ebd53c79 ("net/x25: fix
>> use-after-free in x25_device_event()") holds the wrong lock
>> (&x25_list_lock).
>> Shouldn't this be the lock &x25_neigh_list_lock as in x25_get_neigh(),
>> where x25_neigh_hold() is called?
> 
> After looking at it again, my best guess is something else:
> x25_wait_for_connection_establishment() calls 
> release_sock()/lock_sock()
> while waiting. At this point, a concurrent x25_connect() can
> overwrite the x25->neighbour variable, which needs to be checked
> again before calling x25_neigh_put().
> 

That's a good point. I wonder why any further call to x25_connect() on
the same socket isn't simply returning (EALREADY) as long as
sock->state == SS_CONNECTING?

Martin

^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: [PATCH 4/4] [RFC] staging/net: move AF_X25 into drivers/staging
  2019-12-09 15:12 ` [PATCH 4/4] [RFC] staging/net: move AF_X25 into drivers/staging Arnd Bergmann
  2019-12-09 15:41   ` Greg Kroah-Hartman
  2019-12-09 18:29   ` David Miller
@ 2019-12-11  7:10   ` Krzysztof Hałasa
  2019-12-11 13:34     ` Andrew Lunn
  2 siblings, 1 reply; 12+ messages in thread
From: Krzysztof Hałasa @ 2019-12-11  7:10 UTC (permalink / raw)
  To: Arnd Bergmann
  Cc: David S. Miller, Greg Kroah-Hartman, devel, netdev, linux-kernel,
	Eric Biggers, Andrew Hendry, linux-x25, Kevin Curtis, R.J.Dunlop,
	Zhao Qiang, syzbot+429c200ffc8772bfe070,
	syzbot+eec0c87f31a7c3b66f7b

Arnd,

Arnd Bergmann <arnd@arndb.de> writes:

> - Most other supported HDLC hardware that we supoprt is for the ISA or
>   PCI buses.

I would be surprised if there is anybody left with ISA sync serial
stuff, but the PCI hardware still has some users - these machines don't
need to be upgraded yearly. Most people have migrated away, though.
-- 

Krzysztof Halasa

ŁUKASIEWICZ Research Network
Industrial Research Institute for Automation and Measurements PIAP
Al. Jerozolimskie 202, 02-486 Warsaw, Poland

^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: [PATCH 4/4] [RFC] staging/net: move AF_X25 into drivers/staging
  2019-12-11  7:10   ` Krzysztof Hałasa
@ 2019-12-11 13:34     ` Andrew Lunn
  0 siblings, 0 replies; 12+ messages in thread
From: Andrew Lunn @ 2019-12-11 13:34 UTC (permalink / raw)
  To: Krzysztof Hałasa
  Cc: Arnd Bergmann, David S. Miller, Greg Kroah-Hartman, devel,
	netdev, linux-kernel, Eric Biggers, Andrew Hendry, linux-x25,
	Kevin Curtis, R.J.Dunlop, Zhao Qiang,
	syzbot+429c200ffc8772bfe070, syzbot+eec0c87f31a7c3b66f7b

On Wed, Dec 11, 2019 at 08:10:34AM +0100, Krzysztof Hałasa wrote:
> Arnd,
> 
> Arnd Bergmann <arnd@arndb.de> writes:
> 
> > - Most other supported HDLC hardware that we supoprt is for the ISA or
> >   PCI buses.
> 
> I would be surprised if there is anybody left with ISA sync serial
> stuff, but the PCI hardware still has some users - these machines don't
> need to be upgraded yearly. Most people have migrated away, though.

Hi Krzysztof, Arnd

I have a use case for hdlc_cisco and hdlc_raw_eth. But it uses a lot
of out of tree code, the DAHDI driver framework for E1 cards, and an
E1 card which is not part of DAHDI.

Given how much of this is out of tree, i would understand if you
eventually decide to remove this HDLC code.

	   Andrew

^ permalink raw reply	[flat|nested] 12+ messages in thread

end of thread, other threads:[~2019-12-11 13:34 UTC | newest]

Thread overview: 12+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-12-09 15:12 [PATCH 1/4] [net-next] wan: remove stale Kconfig entries Arnd Bergmann
2019-12-09 15:12 ` [PATCH 2/4] [net-next] wan: remove sbni/granch driver Arnd Bergmann
2019-12-09 15:12 ` [PATCH 3/4] [net-next] wan: remove old frame relay driver Arnd Bergmann
2019-12-09 15:12 ` [PATCH 4/4] [RFC] staging/net: move AF_X25 into drivers/staging Arnd Bergmann
2019-12-09 15:41   ` Greg Kroah-Hartman
2019-12-09 18:29   ` David Miller
2019-12-09 19:26     ` Arnd Bergmann
2019-12-10  8:59       ` Martin Schiller
2019-12-10 13:51         ` Arnd Bergmann
2019-12-11  5:58           ` Martin Schiller
2019-12-11  7:10   ` Krzysztof Hałasa
2019-12-11 13:34     ` Andrew Lunn

This is a public inbox, see mirroring instructions
on how to clone and mirror all data and code used for this inbox