netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: vmxevilstar@gmail.com
To: nic_swsd@realtek.com, netdev@vger.kernel.org
Cc: hkallweit1@gmail.com
Subject: issue with ethernet gigabit ethernet card both on stable and rc kernels
Date: Fri, 20 Jan 2023 13:58:41 +0100	[thread overview]
Message-ID: <46a87c152b967d42ba4af33b2d11791781e9df7f.camel@gmail.com> (raw)

Dear Mantainers,

I am having an issue with my ethernet card.
It works when the system boots but after around a couple of hours it
disconnects.
I tried different ways to get it working without having to reboot but
nothing else seemed to work.
Even rebooting doesn't solve the problem since again, after a couple of
hours, it stops working again.
I have googled around and found that some people had this same problem
on older kernels but no solution seemed to apply to this rc nor latest
stable kernel versions.
I am probably missing something here.
The issue happened also with recent stable 6.1.7 and rc kernel
versions.
I am actually testing the latest 6.2-rc4 version.

Following are some data I think might be useful but if you feel I
neglected to give enough informations and you need more please just ask
me.

Here some informations about my system :
uname -a
Linux ghost 6.2.0-rc4 #2 SMP PREEMPT_DYNAMIC Tue Jan 17 13:35:46 CET
2023 x86_64 GNU/Linux

gcc --version
gcc (Debian 12.2.0-14) 12.2.0
Copyright (C) 2022 Free Software Foundation, Inc.
This is free software; see the source for copying conditions.  There is
NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR
PURPOSE.


/usr/src# lspci|grep -i net
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8125
2.5GbE Controller (rev 05)

description: Ethernet interface
product: RTL8125 2.5GbE Controller
vendor: Realtek Semiconductor Co., Ltd.
physical id: 0
bus info: pci@0000:02:00.0
logical name: enp2s0
version: ff
serial: b0:25:aa:49:a5:3a
size: 1Gbit/s
capacity: 1Gbit/s
width: 32 bits
clock: 66MHz
capabilities: bus_master vga_palette cap_list ethernet physical tp mii
10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=r8169
driverversion=6.2.0-rc4 duplex=full firmware=rtl8125b-2_0.0.2 07/13/20
latency=255 link=yes maxlatency=255 mingnt=255 multicast=yes
port=twisted pair speed=1Gbit/s



lsmod|grep r8169
r8169                 110592  0
mdio_devres            16384  1 r8169
libphy                200704  3 r8169,mdio_devres,realtek

the firmware version I am using is linux-firmware-20221214.tar.gz


Here you can find what happens (dmesg -wT)
[Fri Jan 20 11:04:32 2023] userif-3: sent link up event.

[Fri Jan 20 13:19:41 2023] r8169 0000:02:00.0 enp2s0: rtl_chipcmd_cond
== 1 (loop: 100, delay: 100).
[Fri Jan 20 13:19:41 2023] r8169 0000:02:00.0 enp2s0: rtl_ephyar_cond
== 1 (loop: 100, delay: 10).
[Fri Jan 20 13:19:41 2023] r8169 0000:02:00.0 enp2s0: rtl_ephyar_cond
== 1 (loop: 100, delay: 10).
[Fri Jan 20 13:19:41 2023] r8169 0000:02:00.0 enp2s0: rtl_ephyar_cond
== 1 (loop: 100, delay: 10).
[Fri Jan 20 13:19:41 2023] r8169 0000:02:00.0 enp2s0: rtl_ephyar_cond
== 1 (loop: 100, delay: 10).
[Fri Jan 20 13:19:41 2023] r8169 0000:02:00.0 enp2s0: rtl_ephyar_cond
== 1 (loop: 100, delay: 10).
[Fri Jan 20 13:19:41 2023] r8169 0000:02:00.0 enp2s0: rtl_ephyar_cond
== 1 (loop: 100, delay: 10).
[Fri Jan 20 13:19:41 2023] r8169 0000:02:00.0 enp2s0:
rtl_mac_ocp_e00e_cond == 1 (loop: 10, delay: 1000).
[Fri Jan 20 13:20:17 2023] r8169 0000:02:00.0 enp2s0: rtl_chipcmd_cond
== 1 (loop: 100, delay: 100).
[Fri Jan 20 13:20:17 2023] r8169 0000:02:00.0 enp2s0: rtl_ephyar_cond
== 1 (loop: 100, delay: 10).
[Fri Jan 20 13:20:17 2023] r8169 0000:02:00.0 enp2s0: rtl_ephyar_cond
== 1 (loop: 100, delay: 10).
[Fri Jan 20 13:20:17 2023] r8169 0000:02:00.0 enp2s0: rtl_ephyar_cond
== 1 (loop: 100, delay: 10).
[Fri Jan 20 13:20:17 2023] r8169 0000:02:00.0 enp2s0: rtl_ephyar_cond
== 1 (loop: 100, delay: 10).
[Fri Jan 20 13:20:17 2023] r8169 0000:02:00.0 enp2s0: rtl_ephyar_cond
== 1 (loop: 100, delay: 10).
[Fri Jan 20 13:20:17 2023] r8169 0000:02:00.0 enp2s0: rtl_ephyar_cond
== 1 (loop: 100, delay: 10).
[Fri Jan 20 13:20:18 2023] r8169 0000:02:00.0 enp2s0:
rtl_mac_ocp_e00e_cond == 1 (loop: 10, delay: 1000).

I would love to provide a patch of any kind but I am afraid I don't
have enough programming skills.

Thanks in advance for your time.

             reply	other threads:[~2023-01-20 12:58 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-01-20 12:58 vmxevilstar [this message]
2023-01-20 21:09 ` issue with ethernet gigabit ethernet card both on stable and rc kernels Heiner Kallweit

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=46a87c152b967d42ba4af33b2d11791781e9df7f.camel@gmail.com \
    --to=vmxevilstar@gmail.com \
    --cc=hkallweit1@gmail.com \
    --cc=netdev@vger.kernel.org \
    --cc=nic_swsd@realtek.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).