From: Alex Elder <elder@ieee.org>
To: AngeloGioacchino Del Regno
<angelogioacchino.delregno@somainline.org>,
elder@kernel.org
Cc: bjorn.andersson@linaro.org, agross@kernel.org,
davem@davemloft.net, kuba@kernel.org,
linux-arm-msm@vger.kernel.org, netdev@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
konrad.dybcio@somainline.org, marijn.suijten@somainline.org,
phone-devel@vger.kernel.org
Subject: Re: [PATCH v1 4/7] net: ipa: gsi: Use right masks for GSI v1.0 channels hw param
Date: Mon, 1 Mar 2021 20:05:15 -0600 [thread overview]
Message-ID: <476ea450-16d6-6a8f-650b-0a9becbebce5@ieee.org> (raw)
In-Reply-To: <20210211175015.200772-5-angelogioacchino.delregno@somainline.org>
On 2/11/21 11:50 AM, AngeloGioacchino Del Regno wrote:
> In GSI v1.0 the register GSI_HW_PARAM_2_OFFSET has different layout
> so the number of channels and events per EE are, of course, laid out
> in 8 bits each (0-7, 8-15 respectively).
>
> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
> ---
> drivers/net/ipa/gsi.c | 16 +++++++++++++---
> drivers/net/ipa/gsi_reg.h | 5 +++++
> 2 files changed, 18 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/net/ipa/gsi.c b/drivers/net/ipa/gsi.c
> index b5460cbb085c..3311ffe514c9 100644
> --- a/drivers/net/ipa/gsi.c
> +++ b/drivers/net/ipa/gsi.c
> @@ -1790,7 +1790,7 @@ static void gsi_channel_teardown(struct gsi *gsi)
> int gsi_setup(struct gsi *gsi)
> {
> struct device *dev = gsi->dev;
> - u32 val;
> + u32 val, mask;
> int ret;
>
> /* Here is where we first touch the GSI hardware */
> @@ -1804,7 +1804,12 @@ int gsi_setup(struct gsi *gsi)
>
> val = ioread32(gsi->virt + GSI_GSI_HW_PARAM_2_OFFSET);
>
> - gsi->channel_count = u32_get_bits(val, NUM_CH_PER_EE_FMASK);
> + if (gsi->version == IPA_VERSION_3_1)
> + mask = GSIV1_NUM_CH_PER_EE_FMASK;
> + else
> + mask = NUM_CH_PER_EE_FMASK;
> +
> + gsi->channel_count = u32_get_bits(val, mask);
I have a different way of doing this, at least for
encoding, and I'd rather use a similar convention in
this case. At some point it might become obvious
that "there's got to be a better way" and I might have
to consider something else, but for now I've been
doing what I describe below.
Anyway, what I'd ask for here is to create a a static
inline function in "ipa_reg.h" (or "gsi_reg.h") to
extract these values. In this case it might look
like this:
static inline u32 num_ev_per_ee_get(enum ipa_version version,
u32 val)
{
if (version == IPA_VERSION_3_0 || version == IPA_VERSION_3_1)
return u32_get_bits(val, GENMASK(8, 0));
return u32_get_bits(val, GENMASK(7, 3));
}
(I'm not sure if the above is correct for all versions...)
Then the caller would do:
gsi->evt_ring_count = num_ev_per_ee_get(ipa->version, val);
I'd want the same general thing for the channel count.
-Alex
> if (!gsi->channel_count) {
> dev_err(dev, "GSI reports zero channels supported\n");
> return -EINVAL;
> @@ -1816,7 +1821,12 @@ int gsi_setup(struct gsi *gsi)
> gsi->channel_count = GSI_CHANNEL_COUNT_MAX;
> }
>
> - gsi->evt_ring_count = u32_get_bits(val, NUM_EV_PER_EE_FMASK);
> + if (gsi->version == IPA_VERSION_3_1)
> + mask = GSIV1_NUM_EV_PER_EE_FMASK;
> + else
> + mask = NUM_EV_PER_EE_FMASK;
> +
> + gsi->evt_ring_count = u32_get_bits(val, mask);
> if (!gsi->evt_ring_count) {
> dev_err(dev, "GSI reports zero event rings supported\n");
> return -EINVAL;
> diff --git a/drivers/net/ipa/gsi_reg.h b/drivers/net/ipa/gsi_reg.h
> index 0e138bbd8205..4ba579fa21c2 100644
> --- a/drivers/net/ipa/gsi_reg.h
> +++ b/drivers/net/ipa/gsi_reg.h
> @@ -287,6 +287,11 @@ enum gsi_generic_cmd_opcode {
> GSI_EE_N_GSI_HW_PARAM_2_OFFSET(GSI_EE_AP)
> #define GSI_EE_N_GSI_HW_PARAM_2_OFFSET(ee) \
> (0x0001f040 + 0x4000 * (ee))
> +
> +/* Fields below are present for IPA v3.1 with GSI version 1 */
> +#define GSIV1_NUM_EV_PER_EE_FMASK GENMASK(8, 0)
> +#define GSIV1_NUM_CH_PER_EE_FMASK GENMASK(15, 8)
> +/* Fields below are present for IPA v3.5.1 and above */
> #define IRAM_SIZE_FMASK GENMASK(2, 0)
> #define NUM_CH_PER_EE_FMASK GENMASK(7, 3)
> #define NUM_EV_PER_EE_FMASK GENMASK(12, 8)
>
next prev parent reply other threads:[~2021-03-02 8:41 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-02-11 17:50 [PATCH v1 0/7] Add support for IPA v3.1, GSI v1.0, MSM8998 IPA AngeloGioacchino Del Regno
2021-02-11 17:50 ` [PATCH v1 1/7] net: ipa: Add support for IPA v3.1 with GSI v1.0 AngeloGioacchino Del Regno
2021-02-12 18:49 ` Jakub Kicinski
2021-03-02 2:05 ` Alex Elder
2021-05-05 22:42 ` Alex Elder
2021-02-11 17:50 ` [PATCH v1 2/7] net: ipa: endpoint: Don't read unexistant register on IPAv3.1 AngeloGioacchino Del Regno
2021-03-02 2:05 ` Alex Elder
2021-05-05 22:42 ` Alex Elder
2021-02-11 17:50 ` [PATCH v1 3/7] net: ipa: gsi: Avoid some writes during irq setup for older IPA AngeloGioacchino Del Regno
2021-03-02 2:05 ` Alex Elder
2021-05-05 22:42 ` Alex Elder
2021-02-11 17:50 ` [PATCH v1 4/7] net: ipa: gsi: Use right masks for GSI v1.0 channels hw param AngeloGioacchino Del Regno
2021-03-02 2:05 ` Alex Elder [this message]
2021-05-05 22:42 ` Alex Elder
2021-02-11 17:50 ` [PATCH v1 5/7] net: ipa: Add support for IPA on MSM8998 AngeloGioacchino Del Regno
2021-02-12 18:50 ` Jakub Kicinski
2021-03-02 2:05 ` Alex Elder
2021-05-05 22:42 ` Alex Elder
2021-02-11 17:50 ` [PATCH v1 6/7] dt-bindings: net: qcom-ipa: Document qcom,sc7180-ipa compatible AngeloGioacchino Del Regno
2021-03-02 2:05 ` Alex Elder
2021-03-05 19:32 ` Rob Herring
2021-05-05 22:43 ` Alex Elder
2021-02-11 17:50 ` [PATCH v1 7/7] dt-bindings: net: qcom-ipa: Document qcom,msm8998-ipa compatible AngeloGioacchino Del Regno
2021-03-02 2:05 ` Alex Elder
2021-03-05 19:33 ` Rob Herring
2021-05-05 22:43 ` Alex Elder
2021-02-11 20:27 ` [PATCH v1 0/7] Add support for IPA v3.1, GSI v1.0, MSM8998 IPA Alex Elder
2021-02-11 21:51 ` AngeloGioacchino Del Regno
2021-03-02 2:04 ` Alex Elder
2021-05-05 22:42 ` Alex Elder
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=476ea450-16d6-6a8f-650b-0a9becbebce5@ieee.org \
--to=elder@ieee.org \
--cc=agross@kernel.org \
--cc=angelogioacchino.delregno@somainline.org \
--cc=bjorn.andersson@linaro.org \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=elder@kernel.org \
--cc=konrad.dybcio@somainline.org \
--cc=kuba@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=marijn.suijten@somainline.org \
--cc=netdev@vger.kernel.org \
--cc=phone-devel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).