Re: [PATCH v11 6/6] powerpc: Add flexcan device support for p1010rdb.

[Wolfgang Grandegger <wg-5Yr1BZd7O62+XT7JhA+gdA@public.gmane.org>]

On 08/11/2011 06:07 PM, Robin Holt wrote:
> Allow the p1010 processor to select the flexcan network driver.
> 
> Signed-off-by: Robin Holt <holt-sJ/iWh9BUns@public.gmane.org>
> Acked-by: Marc Kleine-Budde <mkl-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>,
> Acked-by: Wolfgang Grandegger <wg-5Yr1BZd7O62+XT7JhA+gdA@public.gmane.org>,
> Cc: U Bhaskar-B22300 <B22300-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
> Cc: socketcan-core-0fE9KPoRgkgATYTw5x5z8w@public.gmane.org,
> Cc: netdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
> Cc: PPC list <linuxppc-dev-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org>
> Cc: Kumar Gala <galak-XVmvHMARGAS8U2dJNN8I7kB+6BGkLq7r@public.gmane.org>
> ---
>  arch/powerpc/boot/dts/p1010rdb.dts  |    8 ++++++++
>  arch/powerpc/platforms/85xx/Kconfig |    2 ++
>  2 files changed, 10 insertions(+), 0 deletions(-)
> 
> diff --git a/arch/powerpc/boot/dts/p1010rdb.dts b/arch/powerpc/boot/dts/p1010rdb.dts
> index d6c669c..df89b60 100644
> --- a/arch/powerpc/boot/dts/p1010rdb.dts
> +++ b/arch/powerpc/boot/dts/p1010rdb.dts
> @@ -171,6 +171,14 @@
>  			};
>  		};
>  
> +		can@1c000 {
> +			clock-frequency = <0x0bebc1fc>;
> +		};


	                clock-frequency = <200000000>; // filled in by boot-loader

Is better readable and makes clear that the value is filled in by the
boot loader. Usually we specify "<0>" in that case but it will *not*
work with your board because U-Boot fills into the property "clock_freq"
the CCB-frequency, which is twice as much. This needs to be fixed.

> +		can1: can@1d000 {

What is the "can1:" good for?

> +			clock-frequency = <0x0bebc1fc>;

See above.

Wolfgang.




>  		usb@22000 {
>  			phy_type = "utmi";
>  		};
> diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig
> index 498534c..c4304ae 100644
> --- a/arch/powerpc/platforms/85xx/Kconfig
> +++ b/arch/powerpc/platforms/85xx/Kconfig
> @@ -70,6 +70,8 @@ config MPC85xx_RDB
>  config P1010_RDB
>  	bool "Freescale P1010RDB"
>  	select DEFAULT_UIMAGE
> +	select HAVE_CAN_FLEXCAN if NET && CAN
> +	select PPC_CLOCK if CAN_FLEXCAN
>  	help
>  	  This option enables support for the MPC85xx RDB (P1010 RDB) board
>