netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "shenjian (K)" <shenjian15@huawei.com>
To: Alexander Lobakin <alexandr.lobakin@intel.com>
Cc: <davem@davemloft.net>, <kuba@kernel.org>, <andrew@lunn.ch>,
	<ecree.xilinx@gmail.com>, <hkallweit1@gmail.com>,
	<saeed@kernel.org>, <leon@kernel.org>, <netdev@vger.kernel.org>,
	<linuxarm@openeuler.org>
Subject: Re: [RFCv7 PATCH net-next 02/36] net: replace general features macroes with global netdev_features variables
Date: Fri, 12 Aug 2022 18:58:29 +0800	[thread overview]
Message-ID: <4f37548d-c0df-ecd0-62ed-975e4d52f26c@huawei.com> (raw)
In-Reply-To: <20220811110529.4866-1-alexandr.lobakin@intel.com>



在 2022/8/11 19:05, Alexander Lobakin 写道:
> From: "shenjian (K)" <shenjian15@huawei.com>
> Date: Wed, 10 Aug 2022 20:01:15 +0800
>
>> 在 2022/8/10 17:58, Alexander Lobakin 写道:
>> > From: Jian Shen <shenjian15@huawei.com>
>> > Date: Wed, 10 Aug 2022 11:05:50 +0800
>> >
>> >> There are many netdev_features bits group used in kernel. The 
>> definition
>> >> will be illegal when using feature bit more than 64. Replace these 
>> macroes
>> >> with global netdev_features variables, initialize them when netdev 
>> module
>> >> init.
>> >>
>> >> Signed-off-by: Jian Shen <shenjian15@huawei.com>
>> >> ---
>
> [...]
>
>> >> @@ -11362,6 +11363,86 @@ static struct pernet_operations 
>> __net_initdata default_device_ops = {
>> >>       .exit_batch = default_device_exit_batch,
>> >>   };
>> >>   >> +static void __init netdev_features_init(void)
>> > Given that you're creating a new file dedicated to netdev features,
>> > I'd place that initializer there. You can then declare its proto in
>> > net/core/dev.h.
>> I want to make sure it cann't be called outside net/core/dev.c, for some
>> drivers include net/core/dev.h, then they can see it.
>
> net/core/dev.h is internal, nobody outside net/core/ uses it and
> this was its purpose.
>
All right, will move it netdev_features.c
>>
>> >> +{
>> >> +    netdev_features_t features;
>> >> +
>> >> + netdev_features_set_array(&netif_f_ip_csum_feature_set,
>> >> +                  &netdev_ip_csum_features);
>> >> + netdev_features_set_array(&netif_f_csum_feature_set_mask,
>> >> +                  &netdev_csum_features_mask);
>> >> +
>> >> + netdev_features_set_array(&netif_f_gso_feature_set_mask,
>> >> +                  &netdev_gso_features_mask);
>> >> + netdev_features_set_array(&netif_f_general_tso_feature_set,
>> >> +                  &netdev_general_tso_features);
>> >> + netdev_features_set_array(&netif_f_all_tso_feature_set,
>> >> +                  &netdev_all_tso_features);
>> >> + netdev_features_set_array(&netif_f_tso_ecn_feature_set,
>> >> +                  &netdev_tso_ecn_features);
>> >> + netdev_features_set_array(&netif_f_all_fcoe_feature_set,
>> >> +                  &netdev_all_fcoe_features);
>> >> + netdev_features_set_array(&netif_f_gso_soft_feature_set,
>> >> +                  &netdev_gso_software_features);
>> >> + netdev_features_set_array(&netif_f_gso_encap_feature_set,
>> >> +                  &netdev_gso_encap_all_features);
>> >> +
>> >> +    netdev_csum_gso_features_mask =
>> >> +        netdev_features_or(netdev_gso_features_mask,
>> >> +                   netdev_csum_features_mask);
>> > (I forgot to mention this in 01/36 ._.)
>> >
>> > As you're converting to bitmaps, you should probably avoid direct
>> > assignments. All the bitmap_*() modification functions take a pointer
>> > to the destination as a first argument. So it should be
>> >
>> > netdev_features_or(netdev_features_t *dst, const netdev_features_t 
>> *src1,
>> >            const netdev_features_t *src1);
>> The netdev_features_t will be convert to a structure which only 
>> contained
>> a feature bitmap. So assginement is ok.
>
> Yeah I realized it later, probably a good idea.
>
>>
>>
>> >> +
>> >> + netdev_features_set_array(&netif_f_one_for_all_feature_set,
>> >> +                  &netdev_one_for_all_features);
>> > Does it make sense to prefix features and the corresponding sets
>> > differently? Why not just 'netdev_' for both of them?
>> For all the feature bits are named "NETFI_F_XXX_BIT",
>
> Right, but then why are netdev_*_features prefixed with 'netdev',
> not 'netif_f'? :D Those sets are tied tightly with the feature
> structures, so I think they should have the same prefix. I'd go
> with 'netdev' for both.
>
ok, will prefix with 'netdev'

>>
>>
>> >> + netdev_features_set_array(&netif_f_all_for_all_feature_set,
>> >> +                  &netdev_all_for_all_features);
>
> [...]
>
>> >> -- >> 2.33.0
>> > Thanks,
>> > Olek
>> >
>> > .
>>
>> Thank,
>> Jian
>
> Thanks,
> Olek
>
> .
>
Thanks,
Jian

  reply	other threads:[~2022-08-12 10:58 UTC|newest]

Thread overview: 59+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-08-10  3:05 [RFCv7 PATCH net-next 00/36] net: extend the type of netdev_features_t to bitmap Jian Shen
2022-08-10  3:05 ` [RFCv7 PATCH net-next 01/36] net: introduce operation helpers for netdev features Jian Shen
2022-08-10  9:43   ` Alexander Lobakin
2022-08-10 11:32     ` shenjian (K)
2022-08-11 10:49       ` Alexander Lobakin
2022-08-12  2:39         ` shenjian (K)
2022-08-10  3:05 ` [RFCv7 PATCH net-next 02/36] net: replace general features macroes with global netdev_features variables Jian Shen
2022-08-10  9:58   ` Alexander Lobakin
2022-08-10 12:01     ` shenjian (K)
2022-08-11 11:05       ` Alexander Lobakin
2022-08-12 10:58         ` shenjian (K) [this message]
2022-08-10  3:05 ` [RFCv7 PATCH net-next 03/36] net: replace multiple feature bits with DECLARE_NETDEV_FEATURE_SET Jian Shen
2022-08-10 10:37   ` Alexander Lobakin
2022-08-10 12:15     ` shenjian (K)
2022-08-10  3:05 ` [RFCv7 PATCH net-next 04/36] net: sfc: replace const features initialization " Jian Shen
2022-08-10  3:05 ` [RFCv7 PATCH net-next 05/36] net: atlantic: replace const features initialization with NETDEV_FEATURE_SET Jian Shen
2022-08-10  3:05 ` [RFCv7 PATCH net-next 06/36] iwlwifi: " Jian Shen
2022-08-10  3:05 ` [RFCv7 PATCH net-next 07/36] net: ethernet: mtk_eth_soc: " Jian Shen
2022-08-10  3:05 ` [RFCv7 PATCH net-next 08/36] ravb: " Jian Shen
2022-08-10  3:05 ` [RFCv7 PATCH net-next 09/36] test_bpf: " Jian Shen
2022-08-10  3:05 ` [RFCv7 PATCH net-next 10/36] treewide: replace NETIF_F_CSUM_MASK | NETIF_F_GSO_MASK by netdev_csum_gso_features_mask Jian Shen
2022-08-10  3:05 ` [RFCv7 PATCH net-next 11/36] treewide: replace NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM by netdev_ip_csum_features Jian Shen
2022-08-10  3:06 ` [RFCv7 PATCH net-next 12/36] treewide: replace NETIF_F_TSO | NETIF_F_TSO6 by netdev_general_tso_features Jian Shen
2022-08-10  3:06 ` [RFCv7 PATCH net-next 13/36] treewide: replace VLAN tag feature array by const vlan features Jian Shen
2022-08-10  3:06 ` [RFCv7 PATCH net-next 14/36] net: simplify the netdev features expressions for xxx_gso_segment Jian Shen
2022-08-10  3:06 ` [RFCv7 PATCH net-next 15/36] treewide: simplify the netdev features expression Jian Shen
2022-08-10  3:06 ` [RFCv7 PATCH net-next 16/36] treewide: use replace features '0' by netdev_empty_features Jian Shen
2022-08-10 10:48   ` Alexander Lobakin
2022-08-10 12:25     ` shenjian (K)
2022-08-11 12:35       ` Alexander Lobakin
2022-08-10  3:06 ` [RFCv7 PATCH net-next 17/36] treewide: adjust features initialization Jian Shen
2022-08-10 10:58   ` Alexander Lobakin
2022-08-10 14:06     ` shenjian (K)
2022-08-10  3:06 ` [RFCv7 PATCH net-next 18/36] net: mlx4: adjust the net device feature relative macroes Jian Shen
2022-08-10  3:06 ` [RFCv7 PATCH net-next 19/36] net: mlx5e: adjust " Jian Shen
2022-08-10  3:06 ` [RFCv7 PATCH net-next 20/36] net: mlxsw: adjust input parameter for function mlxsw_sp_handle_feature Jian Shen
2022-08-10  3:06 ` [RFCv7 PATCH net-next 21/36] net: iavf: adjust net device features relative macroes Jian Shen
2022-08-10  3:06 ` [RFCv7 PATCH net-next 22/36] net: core: adjust netdev_sync_xxx_features Jian Shen
2022-08-10  3:06 ` [RFCv7 PATCH net-next 23/36] net: adjust the build check for net_gso_ok() Jian Shen
2022-08-10 11:09   ` Alexander Lobakin
2022-08-10 14:41     ` shenjian (K)
2022-08-10  3:06 ` [RFCv7 PATCH net-next 24/36] treewide: use netdev_feature_add helpers Jian Shen
2022-08-10  3:06 ` [RFCv7 PATCH net-next 25/36] treewide: use netdev_features_or/set helpers Jian Shen
2022-08-10  3:06 ` [RFCv7 PATCH net-next 26/36] treewide: use netdev_feature_change helpers Jian Shen
2022-08-10  3:06 ` [RFCv7 PATCH net-next 27/36] treewide: use netdev_feature_del helpers Jian Shen
2022-08-10  3:06 ` [RFCv7 PATCH net-next 28/36] treewide: use netdev_features_andnot and netdev_features_clear helpers Jian Shen
2022-08-10  3:06 ` [RFCv7 PATCH net-next 29/36] treewide: use netdev_features_xor helpers Jian Shen
2022-08-10  3:06 ` [RFCv7 PATCH net-next 30/36] treewide: use netdev_feature_test helpers Jian Shen
2022-08-10  3:06 ` [RFCv7 PATCH net-next 31/36] treewide: use netdev_features_intersects helpers Jian Shen
2022-08-10  3:06 ` [RFCv7 PATCH net-next 32/36] net: use netdev_features_and and netdev_features_mask helpers Jian Shen
2022-08-10  3:06 ` [RFCv7 PATCH net-next 33/36] treewide: use netdev_features_subset helpers Jian Shen
2022-08-10  3:06 ` [RFCv7 PATCH net-next 34/36] treewide: use netdev_features_equal helpers Jian Shen
2022-08-10  3:06 ` [RFCv7 PATCH net-next 35/36] treewide: use netdev_features_empty helpers Jian Shen
2022-08-10  3:06 ` [RFCv7 PATCH net-next 36/36] net: redefine the prototype of netdev_features_t Jian Shen
2022-08-10 11:35   ` Alexander Lobakin
     [not found]     ` <3df89822-7dec-c01e-0df9-15b8e6f7d4e5@huawei.com>
2022-08-11 13:07       ` Alexander Lobakin
2022-08-11 15:13         ` Jakub Kicinski
2022-08-12 11:43           ` shenjian (K)
2022-08-12 11:30         ` shenjian (K)

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4f37548d-c0df-ecd0-62ed-975e4d52f26c@huawei.com \
    --to=shenjian15@huawei.com \
    --cc=alexandr.lobakin@intel.com \
    --cc=andrew@lunn.ch \
    --cc=davem@davemloft.net \
    --cc=ecree.xilinx@gmail.com \
    --cc=hkallweit1@gmail.com \
    --cc=kuba@kernel.org \
    --cc=leon@kernel.org \
    --cc=linuxarm@openeuler.org \
    --cc=netdev@vger.kernel.org \
    --cc=saeed@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).