From: Jesse Larrew <jlarrew@linux.vnet.ibm.com>
To: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>,
"David S. Miller" <davem@davemloft.net>,
Jason Wang <jasowang@redhat.com>, Cong Wang <amwang@redhat.com>,
Amos Kong <akong@redhat.com>, Dave Jones <davej@redhat.com>,
virtualization@lists.linux-foundation.org,
netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
qemu-devel@nongnu.org
Subject: Re: [Qemu-devel] [PATCH] virtio-net: put virtio net header inline with data
Date: Thu, 06 Jun 2013 14:59:44 -0500 [thread overview]
Message-ID: <51B0EA30.3020804@linux.vnet.ibm.com> (raw)
In-Reply-To: <20130606095456.GA7865@redhat.com>
Hi Michael!
On 06/06/2013 04:55 AM, Michael S. Tsirkin wrote:
> diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
> index c9e0038..d35a097 100644
> --- a/drivers/net/virtio_net.c
> +++ b/drivers/net/virtio_net.c
> @@ -106,6 +106,9 @@ struct virtnet_info {
> /* Has control virtqueue */
> bool has_cvq;
>
> + /* Host can handle any s/g split between our header and packet data */
> + bool any_header_sg;
> +
> /* enable config space updates */
> bool config_enable;
>
> @@ -668,12 +671,28 @@ static void free_old_xmit_skbs(struct send_queue *sq)
>
> static int xmit_skb(struct send_queue *sq, struct sk_buff *skb)
> {
> - struct skb_vnet_hdr *hdr = skb_vnet_hdr(skb);
> + struct skb_vnet_hdr *hdr;
> const unsigned char *dest = ((struct ethhdr *)skb->data)->h_dest;
> struct virtnet_info *vi = sq->vq->vdev->priv;
> unsigned num_sg;
> + unsigned hdr_len;
> + bool can_push;
>
> pr_debug("%s: xmit %p %pM\n", vi->dev->name, skb, dest);
> + if (vi->mergeable_rx_bufs)
> + hdr_len = sizeof hdr->mhdr;
> + else
> + hdr_len = sizeof hdr->hdr;
All conditionals need braces.
> +
> + can_push = vi->any_header_sg &&
> + !((unsigned long)skb->data & (__alignof__(*hdr) - 1)) &&
> + !skb_header_cloned(skb) && skb_headroom(skb) >= hdr_len;
> + /* Even if we can, don't push here yet as this would skew
> + * csum_start offset below. */
> + if (can_push)
> + hdr = (struct skb_vnet_hdr *)(skb->data - hdr_len);
> + else
> + hdr = skb_vnet_hdr(skb);
Ditto.
>
> if (skb->ip_summed == CHECKSUM_PARTIAL) {
> hdr->hdr.flags = VIRTIO_NET_HDR_F_NEEDS_CSUM;
> @@ -702,15 +721,18 @@ static int xmit_skb(struct send_queue *sq, struct sk_buff *skb)
> hdr->hdr.gso_size = hdr->hdr.hdr_len = 0;
> }
>
> - hdr->mhdr.num_buffers = 0;
> -
> - /* Encode metadata header at front. */
> if (vi->mergeable_rx_bufs)
> - sg_set_buf(sq->sg, &hdr->mhdr, sizeof hdr->mhdr);
> - else
> - sg_set_buf(sq->sg, &hdr->hdr, sizeof hdr->hdr);
> + hdr->mhdr.num_buffers = 0;
>
Here too, please.
> - num_sg = skb_to_sgvec(skb, sq->sg + 1, 0, skb->len) + 1;
> + if (can_push) {
> + __skb_push(skb, hdr_len);
> + num_sg = skb_to_sgvec(skb, sq->sg, 0, skb->len);
> + /* Pull header back to avoid skew in tx bytes calculations. */
> + __skb_pull(skb, hdr_len);
> + } else {
> + sg_set_buf(sq->sg, hdr, hdr_len);
> + num_sg = skb_to_sgvec(skb, sq->sg + 1, 0, skb->len) + 1;
> + }
> return virtqueue_add_outbuf(sq->vq, sq->sg, num_sg, skb, GFP_ATOMIC);
> }
>
> @@ -1554,6 +1576,9 @@ static int virtnet_probe(struct virtio_device *vdev)
> if (virtio_has_feature(vdev, VIRTIO_NET_F_MRG_RXBUF))
> vi->mergeable_rx_bufs = true;
>
This is just context, but we may as well fix this as well.
> + if (virtio_has_feature(vdev, VIRTIO_NET_F_ANY_HEADER_SG))
> + vi->any_header_sg = true;
> +
Braces here, please.
> if (virtio_has_feature(vdev, VIRTIO_NET_F_CTRL_VQ))
> vi->has_cvq = true;
>
Might as well fix this too.
> @@ -1729,6 +1754,7 @@ static unsigned int features[] = {
> VIRTIO_NET_F_CTRL_RX, VIRTIO_NET_F_CTRL_VLAN,
> VIRTIO_NET_F_GUEST_ANNOUNCE, VIRTIO_NET_F_MQ,
> VIRTIO_NET_F_CTRL_MAC_ADDR,
> + VIRTIO_NET_F_ANY_HEADER_SG,
> };
>
> static struct virtio_driver virtio_net_driver = {
> diff --git a/include/uapi/linux/virtio_net.h b/include/uapi/linux/virtio_net.h
> index c520203..9c98b7d 100644
> --- a/include/uapi/linux/virtio_net.h
> +++ b/include/uapi/linux/virtio_net.h
> @@ -55,6 +55,8 @@
> * Steering */
> #define VIRTIO_NET_F_CTRL_MAC_ADDR 23 /* Set MAC address */
>
> +#define VIRTIO_NET_F_ANY_HEADER_SG 25 /* Host can handle any header s/g */
> +
> #define VIRTIO_NET_S_LINK_UP 1 /* Link is up */
> #define VIRTIO_NET_S_ANNOUNCE 2 /* Announcement is needed */
>
> @@ -70,7 +72,9 @@ struct virtio_net_config {
> __u16 max_virtqueue_pairs;
> } __attribute__((packed));
>
> -/* This is the first element of the scatter-gather list. If you don't
> +/* This header comes first in the scatter-gather list.
> + * If VIRTIO_NET_F_ANY_HEADER_SG is not negotiated, it must
> + * be the first element of the scatter-gather list. If you don't
> * specify GSO or CSUM features, you can simply ignore the header. */
> struct virtio_net_hdr {
> #define VIRTIO_NET_HDR_F_NEEDS_CSUM 1 // Use csum_start, csum_offset
>
Sincerely,
Jesse Larrew
Software Engineer, KVM Team
IBM Linux Technology Center
Phone: (512) 973-2052 (T/L: 363-2052)
jlarrew@linux.vnet.ibm.com
next prev parent reply other threads:[~2013-06-06 19:59 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-06-06 9:55 [PATCH] virtio-net: put virtio net header inline with data Michael S. Tsirkin
2013-06-06 19:59 ` Jesse Larrew [this message]
2013-06-06 20:09 ` [Qemu-devel] " Dave Jones
2013-06-06 20:18 ` Jesse Larrew
2013-06-07 2:12 ` Rusty Russell
2013-06-09 7:11 ` Michael S. Tsirkin
2013-06-07 2:52 ` Jason Wang
2013-06-09 6:52 ` Michael S. Tsirkin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=51B0EA30.3020804@linux.vnet.ibm.com \
--to=jlarrew@linux.vnet.ibm.com \
--cc=akong@redhat.com \
--cc=amwang@redhat.com \
--cc=davej@redhat.com \
--cc=davem@davemloft.net \
--cc=jasowang@redhat.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mst@redhat.com \
--cc=netdev@vger.kernel.org \
--cc=qemu-devel@nongnu.org \
--cc=rusty@rustcorp.com.au \
--cc=virtualization@lists.linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).