From: William Manley <william.manley@youview.com>
To: William Manley <william.manley@youview.com>
Cc: <netdev@vger.kernel.org>
Subject: Re: [PATCH] net: igmp: Reduce Unsolicited report interval to 1s when using IGMPv3
Date: Wed, 24 Jul 2013 14:45:08 +0100 [thread overview]
Message-ID: <51EFDA64.4020409@youview.com> (raw)
In-Reply-To: <1374673098-10295-1-git-send-email-william.manley@youview.com>
On 24/07/13 14:38, William Manley wrote:
> If an IGMP join packet is lost you will not receive data sent to the
> multicast group so if no data arrives from that multicast group in a
> period of time after the IGMP join a second IGMP join will be sent. The
> delay between joins is the "IGMP Unsolicited Report Interval".
>
> Previously this value was hard coded to be chosen randomly between 0-10s.
> This can be too long for some use-cases, such as IPTV as it can cause
> channel change to be slow in the presence of packet loss.
>
> The value 10s has come from IGMPv2 RFC2236, which was reduced to 1s in
> IGMPv3 RFC3376. This patch makes the kernel use the 1s value from the
> later RFC if we are operating in IGMPv3 mode. IGMPv2 behaviour is
> unaffected.
>
> Tested with Wireshark and a simple program to join a (non-existant)
> multicast group. The distribution of timings for the second join differ
> based upon setting /proc/sys/net/ipv4/conf/eth0/force_igmp_version.
> ---
> net/ipv4/igmp.c | 17 ++++++++++++++---
> 1 file changed, 14 insertions(+), 3 deletions(-)
I'm also working on a patch which builds on this adding a procfs knob
similar to force_igmp_version but called
"force_igmp_unsolicited_report_interval". This will allow the interval
to be overridden from user-space independent of the version of IGMP in
use as for our use-case we want the interval to be short even for IGMPv2.
Thanks
Will
next prev parent reply other threads:[~2013-07-24 13:45 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-07-22 20:43 IGMP Unsolicited Report Interval too long for IGMPv3? William Manley
2013-07-22 21:09 ` Ben Hutchings
2013-07-24 13:38 ` [PATCH] net: igmp: Reduce Unsolicited report interval to 1s when using IGMPv3 William Manley
2013-07-24 13:45 ` William Manley [this message]
2013-07-24 14:51 ` Sergei Shtylyov
2013-07-25 12:14 ` [PATCH 1/2] " William Manley
2013-07-25 12:14 ` [PATCH 2/2] net: igmp: Allow user-space configuration of igmp unsolicited report interval William Manley
2013-07-26 16:36 ` Hannes Frederic Sowa
2013-07-29 14:21 ` [PATCH v3 1/2] net: igmp: Reduce Unsolicited report interval to 1s when using IGMPv3 William Manley
2013-07-29 14:21 ` [PATCH v3 2/2] net: igmp: Allow user-space configuration of igmp unsolicited report interval William Manley
2013-07-30 6:14 ` Hannes Frederic Sowa
2013-07-30 23:55 ` David Miller
2013-07-31 6:34 ` Hannes Frederic Sowa
2013-07-31 9:47 ` William Manley
2013-08-06 18:03 ` IGMP Unsolicited report interval patches William Manley
2013-08-06 18:03 ` [PATCH v4 1/3] net: igmp: Reduce Unsolicited report interval to 1s when using IGMPv3 William Manley
2013-08-07 0:45 ` Hannes Frederic Sowa
2013-08-07 13:43 ` Benjamin LaHaise
2013-08-06 18:03 ` [PATCH v4 2/3] net: igmp: Don't flush routing cache when force_igmp_version is modified William Manley
2013-08-07 0:45 ` Hannes Frederic Sowa
2013-08-07 13:43 ` Benjamin LaHaise
2013-08-06 18:03 ` [PATCH v4 3/3] net: igmp: Allow user-space configuration of igmp unsolicited report interval William Manley
2013-08-07 1:00 ` Hannes Frederic Sowa
2013-08-07 13:43 ` Benjamin LaHaise
2013-08-07 1:03 ` IGMP Unsolicited report interval patches Hannes Frederic Sowa
2013-08-08 9:01 ` Hannes Frederic Sowa
2013-08-09 18:28 ` David Miller
2013-07-31 5:07 ` [PATCH v3 2/2] net: igmp: Allow user-space configuration of igmp unsolicited report interval Bill Fink
2013-07-29 21:34 ` [PATCH v3 1/2] net: igmp: Reduce Unsolicited report interval to 1s when using IGMPv3 Hannes Frederic Sowa
2013-07-26 16:32 ` [PATCH " Hannes Frederic Sowa
2013-07-26 16:39 ` Hannes Frederic Sowa
2013-07-29 14:39 ` William Manley
2013-07-29 14:56 ` Hannes Frederic Sowa
2013-07-22 21:18 ` IGMP Unsolicited Report Interval too long for IGMPv3? Benjamin LaHaise
2013-07-22 21:51 ` Hannes Frederic Sowa
2013-07-25 23:42 ` David Miller
2013-07-26 13:11 ` Benjamin LaHaise
2013-07-26 15:06 ` Hannes Frederic Sowa
2013-07-26 15:15 ` Benjamin LaHaise
2013-07-22 22:06 ` Lukas Tribus
2013-07-22 22:30 ` Hannes Frederic Sowa
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=51EFDA64.4020409@youview.com \
--to=william.manley@youview.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).