From mboxrd@z Thu Jan 1 00:00:00 1970 From: zhuyj Subject: Re: [Intel-wired-lan] [PATCH 2/2] ixgbe: restrict synchronization of link_up and speed Date: Wed, 30 Dec 2015 16:20:22 +0800 Message-ID: <568393C6.1060105@gmail.com> References: <1450926752-11392-1-git-send-email-zyjzyj2000@gmail.com> <1451356326-2919-1-git-send-email-zyjzyj2000@gmail.com> <1451356326-2919-3-git-send-email-zyjzyj2000@gmail.com> <87618083B2453E4A8714035B62D67992504FB5FF@FMSMSX105.amr.corp.intel.com> <5683462C.3020801@gmail.com> <87618083B2453E4A8714035B62D67992504FD7FB@FMSMSX105.amr.corp.intel.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Cc: "Viswanathan, Ven \(Wind River\)" , "Shteinbock, Boris \(Wind River\)" , "Bourg, Vincent \(Wind River\)" To: "Tantilov, Emil S" , "Kirsher, Jeffrey T" , "Brandeburg, Jesse" , "Nelson, Shannon" , "Wyborny, Carolyn" , "Skidmore, Donald C" , "Allan, Bruce W" , "Ronciak, John" , "Williams, Mitch A" , "intel-wired-lan@lists.osuosl.org" , "netdev@vger.kernel.org" , "e1000-devel@lists.sourceforge.net" Return-path: In-Reply-To: <87618083B2453E4A8714035B62D67992504FD7FB@FMSMSX105.amr.corp.intel.com> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: e1000-devel-bounces@lists.sourceforge.net List-Id: netdev.vger.kernel.org On 12/30/2015 02:55 PM, Tantilov, Emil S wrote: >> -----Original Message----- >> From: zhuyj [mailto:zyjzyj2000@gmail.com] >> Sent: Tuesday, December 29, 2015 6:49 PM >> To: Tantilov, Emil S; Kirsher, Jeffrey T; Brandeburg, Jesse; Nelson, >> Shannon; Wyborny, Carolyn; Skidmore, Donald C; Allan, Bruce W; Ronciak, >> John; Williams, Mitch A; intel-wired-lan@lists.osuosl.org; >> netdev@vger.kernel.org; e1000-devel@lists.sourceforge.net >> Cc: Viswanathan, Ven (Wind River); Shteinbock, Boris (Wind River); Bourg, >> Vincent (Wind River) >> Subject: Re: [Intel-wired-lan] [PATCH 2/2] ixgbe: restrict synchronization >> of link_up and speed >> >> On 12/30/2015 12:18 AM, Tantilov, Emil S wrote: >>>> -----Original Message----- >>>> From: Intel-wired-lan [mailto:intel-wired-lan-bounces@lists.osuosl.org] >> On >>>> Behalf Of zyjzyj2000@gmail.com >>>> Sent: Monday, December 28, 2015 6:32 PM >>>> To: Kirsher, Jeffrey T; Brandeburg, Jesse; Nelson, Shannon; Wyborny, >>>> Carolyn; Skidmore, Donald C; Allan, Bruce W; Ronciak, John; Williams, >> Mitch >>>> A; intel-wired-lan@lists.osuosl.org; netdev@vger.kernel.org; e1000- >>>> devel@lists.sourceforge.net >>>> Cc: Viswanathan, Ven (Wind River); Shteinbock, Boris (Wind River); >> Bourg, >>>> Vincent (Wind River) >>>> Subject: [Intel-wired-lan] [PATCH 2/2] ixgbe: restrict synchronization >> of >>>> link_up and speed >>>> >>>> From: Zhu Yanjun >>>> >>>> When the X540 NIC acts as a slave of some virtual NICs, it is very >>>> important to synchronize link_up and link_speed, such as a bonding >>>> driver in 802.3ad mode. When X540 NIC acts as an independent interface, >>>> it is not necessary to synchronize link_up and link_speed. That is, >>>> the time span between link_up and link_speed is acceptable. >>> What exactly do you mean by "time span between link_up and link_speed"? >> In the previous mail, I show you some ethtool logs. In these logs, there >> is some >> time with NIC up while speed is unknown. I think this "some time" is >> time span between >> link_up and link_speed. Please see the previous mail for details. > Was this when reporting the link state from check_link() (reading the LINKS > register) or reporting the adapter->link_speed? > >>> Where is it you think the de-synchronization occurs? >> When a NIC interface acts as a slave, a flag "IFF_SLAVE" is set in >> netdevice struct. >> Before we enter this function, we check IFF_SLAVE flag. If this flag is >> set, we continue to check >> link_speed. If not, this function is executed whether this link_speed is >> unknown or not. > I can already see this in your patch. I was asking about the reason why your > change is needed. an extreme example, let us assume this scenario: An ixgbe NIC directly connects to another NIC (let us call it NIC-a). And auto-negotiate is off while no static speed is set in the 2 NICs. These 2 NICs acts as 2 independent interfaces. As such, at this time, there is no speed in the both 2 NICs. That is, link_speed is unknown. When the user run "ifconfig or ethtool", NIC-a will show "Link detected: yes" while ixgbe NIC will show "Link detected: no" if the flag IFF_SLAVE is not set. NIC-a stands for most NIC, such as e1000, e1000e and so on. Best Regards! Zhu Yanjun > >>>> Signed-off-by: Zhu Yanjun >>>> --- >>>> drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 9 ++++++++- >>>> 1 file changed, 8 insertions(+), 1 deletion(-) >>>> >>>> diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c >>>> b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c >>>> index ace21b9..1bb6056 100644 >>>> --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c >>>> +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c >>>> @@ -6436,8 +6436,15 @@ static void ixgbe_watchdog_link_is_up(struct >>>> ixgbe_adapter *adapter) >>>> * time. To X540 NIC, there is a time span between link_up and >>>> * link_speed. As such, only continue if link_up and link_speed are >>>> * ready to X540 NIC. >>>> + * The time span between link_up and link_speed is very important >>>> + * when the X540 NIC acts as a slave in some virtual NICs, such as >>>> + * a bonding driver in 802.3ad mode. When X540 NIC acts as an >>>> + * independent interface, it is not necessary to synchronize link_up >>>> + * and link_speed. >>>> + * In the end, not continue if (X540 NIC && SLAVE && link_speed >>>> UNKNOWN) >>> This is a patch on top of your previous patch which I don't think was >> applied, >>> so this is not going to apply cleanly. >>> >>>> */ >>>> - if (hw->mac.type == ixgbe_mac_X540) >>>> + if ((hw->mac.type == ixgbe_mac_X540) && >>>> + (netdev->flags & IFF_SLAVE)) >>>> if (link_speed == IXGBE_LINK_SPEED_UNKNOWN) >>>> return; >>> If you were to enter ixgbe_watchdog_link_is_up() with unknown speed, then >> I would >>> assume that you also have a dmesg that shows: >>> "NIC Link is Up unknown speed" >>> >>> by the interface you use in the bond? >> Sure. There is a dmesg log from the customer. >> " >> ... >> 2015-10-05T06:14:34.350 controller-0 kernel: info bonding: bond0: link >> status definitely up for interface eth0, 0 Mbps full duplex. > This message is from the bonding driver not from ixgbe. > > In your patch you are adding a check for unknown link to ixgbe_watchdog_link_is_up() > if that condition was true then you should also see "unknown link" being reported by ixgbe. > > Thanks, > Emil > ------------------------------------------------------------------------------ _______________________________________________ E1000-devel mailing list E1000-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/e1000-devel To learn more about Intel® Ethernet, visit http://communities.intel.com/community/wired