archive mirror
 help / color / mirror / Atom feed
From: Heiner Kallweit <>
To: Bernhard Hampel-Waffenthal <>
Cc:,,, Jakub Kicinski <>
Subject: Re: [REGRESSION] r8169: RTL8168h "transmit queue 0 timed out" after ASPM L1 enablement
Date: Wed, 8 Jun 2022 09:30:52 +0200	[thread overview]
Message-ID: <> (raw)
In-Reply-To: <>

On 08.06.2022 02:44, Bernhard Hampel-Waffenthal wrote:
> #regzbot introduced: 4b5f82f6aaef3fa95cce52deb8510f55ddda6a71
> Hi,
> since the last major kernel version upgrade to 5.18 on Arch Linux I'm unable to get a usable ethernet connection on my desktop PC.
> I can see a timeout in the logs
> > kernel: NETDEV WATCHDOG: enp37s0 (r8169): transmit queue 0 timed out
> and regular very likely related errors after
> > kernel: r8169 0000:25:00.0 enp37s0: rtl_rxtx_empty_cond == 0 (loop: 42, delay: 100).
> The link does manage to go up at nominal full 1Gbps speed, but there is no usable connection to speak of and pings are very bursty and take multiple seconds.
> I was able to pinpoint that the problems were introduced in commit 4b5f82f6aaef3fa95cce52deb8510f55ddda6a71 with the enablement of ASPM L1/L1.1 for ">= RTL_GIGA_MAC_VER_45", which my chip falls under. Adding pcie_aspm=off the kernel command line or changing that check to ">= RTL_GIGA_MAC_VER_60" for testing purposes and recompiling the kernel fixes my problems.
> I'm using a MSI B450I GAMING PLUS AC motherboard with a RTL8168h chip as per dmesg:
> > r8169 0000:25:00.0 eth0: RTL8168h/8111h, 30:9c:23:de:97:a9, XID 541, IRQ 101
> lspci says:
> > 25:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 15)
>         Subsystem: Micro-Star International Co., Ltd. [MSI] Device [1462:7a40]
>         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
>         Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>         Latency: 0, Cache Line Size: 64 bytes
>         Interrupt: pin A routed to IRQ 30
>         IOMMU group: 14
>         Region 0: I/O ports at f000 [size=256]
>         Region 2: Memory at fcb04000 (64-bit, non-prefetchable) [size=4K]
>         Region 4: Memory at fcb00000 (64-bit, non-prefetchable) [size=16K]
>         Capabilities: <access denied>
>         Kernel driver in use: r8169
>         Kernel modules: r8169
Thanks for the report. On my test systems RTL8168h works fine with ASPM L1 and L1.1, so it seems to be
a board-specific issue. Some reports in the past indicated that changing IOMMU settings may help,
you can also use the ASPM sysfs link attributes to disable selected ASPM states for just this link.

> If you need more info I'll do my best to provide what I can, hope that helps already.
> Regards,
> Bernhard

  reply	other threads:[~2022-06-08  8:18 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-06-08  0:44 [REGRESSION] r8169: RTL8168h "transmit queue 0 timed out" after ASPM L1 enablement Bernhard Hampel-Waffenthal
2022-06-08  7:30 ` Heiner Kallweit [this message]
2022-06-20  6:40   ` Thorsten Leemhuis
2022-06-08 13:19 ` Hans de Goede

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \ \ \ \ \ \ \ \

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).