From: Jesse Brandeburg <jesse.brandeburg@intel.com>
To: <m.chetan.kumar@linux.intel.com>, <netdev@vger.kernel.org>
Cc: <kuba@kernel.org>, <davem@davemloft.net>,
<johannes@sipsolutions.net>, <ryazanov.s.a@gmail.com>,
<loic.poulain@linaro.org>, <ilpo.jarvinen@linux.intel.com>,
<ricardo.martinez@linux.intel.com>,
<chiranjeevi.rapolu@linux.intel.com>, <haijun.liu@mediatek.com>,
<edumazet@google.com>, <pabeni@redhat.com>, <linuxwwan@intel.com>,
<linuxwwan_5g@intel.com>, <chandrashekar.devegowda@intel.com>,
<matthias.bgg@gmail.com>, <linux-arm-kernel@lists.infradead.org>,
<linux-mediatek@lists.infradead.org>,
Madhusmita Sahu <madhusmita.sahu@intel.com>
Subject: Re: [PATCH v3 net-next 3/5] net: wwan: t7xx: PCIe reset rescan
Date: Fri, 6 Jan 2023 10:42:13 -0800 [thread overview]
Message-ID: <6a8b7eee-2af9-b953-8431-875ea9701a89@intel.com> (raw)
In-Reply-To: <568b6ed1fa2ddf9b8f44980bec9a28df7a24662e.1673016069.git.m.chetan.kumar@linux.intel.com>
On 1/6/2023 8:27 AM, m.chetan.kumar@linux.intel.com wrote:
> From: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
>
> PCI rescan module implements "rescan work queue".
> In firmware flashing or coredump collection procedure
> WWAN device is programmed to boot in fastboot mode and
> a work item is scheduled for removal & detection.
>
> The WWAN device is reset using APCI call as part driver
> removal flow. Work queue rescans pci bus at fixed interval
> for device detection, later when device is detect work queue
> exits.
>
> Signed-off-by: Haijun Liu <haijun.liu@mediatek.com>
> Co-developed-by: Madhusmita Sahu <madhusmita.sahu@intel.com>
> Signed-off-by: Madhusmita Sahu <madhusmita.sahu@intel.com>
> Signed-off-by: Ricardo Martinez <ricardo.martinez@linux.intel.com>
> Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
> Signed-off-by: Devegowda Chandrashekar <chandrashekar.devegowda@intel.com>
> --
> v3:
> * No Change.
> v2:
> * Drop empty line inside critical sections.
> * Correct log message.
> * Correct logic inside t7xx_always_match().
> * Drop hp_enable changes.
> * Drop g_ prefix from t7xx_rescan_ctx.
> * Use tab before comment in struct decl.
> * Remove extra white space.
> * Drop modem exception state check.
> * Crit section newlines.
> * Remove unnecessary header files inclusion.
> * Drop spinlock around reset and rescan flow.
> ---
> drivers/net/wwan/t7xx/Makefile | 3 +-
> drivers/net/wwan/t7xx/t7xx_modem_ops.c | 3 +
> drivers/net/wwan/t7xx/t7xx_pci.c | 56 ++++++++++++++-
> drivers/net/wwan/t7xx/t7xx_pci_rescan.c | 96 +++++++++++++++++++++++++
> drivers/net/wwan/t7xx/t7xx_pci_rescan.h | 28 ++++++++
> 5 files changed, 184 insertions(+), 2 deletions(-)
> create mode 100644 drivers/net/wwan/t7xx/t7xx_pci_rescan.c
> create mode 100644 drivers/net/wwan/t7xx/t7xx_pci_rescan.h
>
> diff --git a/drivers/net/wwan/t7xx/Makefile b/drivers/net/wwan/t7xx/Makefile
> index 268ff9e87e5b..ba5c607404a4 100644
> --- a/drivers/net/wwan/t7xx/Makefile
> +++ b/drivers/net/wwan/t7xx/Makefile
> @@ -17,7 +17,8 @@ mtk_t7xx-y:= t7xx_pci.o \
> t7xx_hif_dpmaif_tx.o \
> t7xx_hif_dpmaif_rx.o \
> t7xx_dpmaif.o \
> - t7xx_netdev.o
> + t7xx_netdev.o \
> + t7xx_pci_rescan.o
>
> mtk_t7xx-$(CONFIG_WWAN_DEBUGFS) += \
> t7xx_port_trace.o \
> diff --git a/drivers/net/wwan/t7xx/t7xx_modem_ops.c b/drivers/net/wwan/t7xx/t7xx_modem_ops.c
> index cbd65aa48721..2fcaea4694ba 100644
> --- a/drivers/net/wwan/t7xx/t7xx_modem_ops.c
> +++ b/drivers/net/wwan/t7xx/t7xx_modem_ops.c
> @@ -37,6 +37,7 @@
> #include "t7xx_modem_ops.h"
> #include "t7xx_netdev.h"
> #include "t7xx_pci.h"
> +#include "t7xx_pci_rescan.h"
> #include "t7xx_pcie_mac.h"
> #include "t7xx_port.h"
> #include "t7xx_port_proxy.h"
> @@ -194,6 +195,8 @@ static irqreturn_t t7xx_rgu_isr_thread(int irq, void *data)
>
> msleep(RGU_RESET_DELAY_MS);
> t7xx_reset_device_via_pmic(t7xx_dev);
> + t7xx_rescan_queue_work(t7xx_dev->pdev);
> +
> return IRQ_HANDLED;
> }
>
> diff --git a/drivers/net/wwan/t7xx/t7xx_pci.c b/drivers/net/wwan/t7xx/t7xx_pci.c
> index 871f2a27a398..1e953ec7dd00 100644
> --- a/drivers/net/wwan/t7xx/t7xx_pci.c
> +++ b/drivers/net/wwan/t7xx/t7xx_pci.c
> @@ -38,6 +38,7 @@
> #include "t7xx_mhccif.h"
> #include "t7xx_modem_ops.h"
> #include "t7xx_pci.h"
> +#include "t7xx_pci_rescan.h"
> #include "t7xx_pcie_mac.h"
> #include "t7xx_reg.h"
> #include "t7xx_state_monitor.h"
> @@ -715,6 +716,7 @@ static int t7xx_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
> return ret;
> }
>
> + t7xx_rescan_done();
> t7xx_pcie_mac_set_int(t7xx_dev, MHCCIF_INT);
> t7xx_pcie_mac_interrupts_en(t7xx_dev);
>
> @@ -754,7 +756,59 @@ static struct pci_driver t7xx_pci_driver = {
> .shutdown = t7xx_pci_shutdown,
> };
>
> -module_pci_driver(t7xx_pci_driver);
> +static int __init t7xx_pci_init(void)
> +{
> + int ret;
> +
> + t7xx_pci_dev_rescan();
> + ret = t7xx_rescan_init();
> + if (ret) {
> + pr_err("Failed to init t7xx rescan work\n");
> + return ret;
> + }
> +
> + return pci_register_driver(&t7xx_pci_driver);
> +}
> +module_init(t7xx_pci_init);
> +
> +static int t7xx_always_match(struct device *dev, const void *data)
> +{
> + struct pci_dev *pdev = to_pci_dev(dev);
> + const struct pci_device_id *id = data;
> +
> + if (pci_match_id(id, pdev))
> + return 1;
> +
> + return 0;
> +}
> +
> +static void __exit t7xx_pci_cleanup(void)
> +{
> + int remove_flag = 0;
> + struct device *dev;
> +
> + dev = driver_find_device(&t7xx_pci_driver.driver, NULL, &t7xx_pci_table[0],
> + t7xx_always_match);
> + if (dev) {
> + pr_debug("unregister t7xx PCIe driver while device is still exist.\n");
nit: s/is still exist/still exists/
> + put_device(dev);
> + remove_flag = 1;
> + } else {
> + pr_debug("no t7xx PCIe driver found.\n");
> + }
> +
> + pci_lock_rescan_remove();
> + pci_unregister_driver(&t7xx_pci_driver);
> + pci_unlock_rescan_remove();
> +
> + t7xx_rescan_deinit();
> + if (remove_flag) {
> + pr_debug("remove t7xx PCI device\n");
> + pci_stop_and_remove_bus_device_locked(to_pci_dev(dev));
> + }
> +}
> +
> +module_exit(t7xx_pci_cleanup);
>
> MODULE_AUTHOR("MediaTek Inc");
> MODULE_DESCRIPTION("MediaTek PCIe 5G WWAN modem T7xx driver");
> diff --git a/drivers/net/wwan/t7xx/t7xx_pci_rescan.c b/drivers/net/wwan/t7xx/t7xx_pci_rescan.c
> new file mode 100644
> index 000000000000..67f13c035846
> --- /dev/null
> +++ b/drivers/net/wwan/t7xx/t7xx_pci_rescan.c
> @@ -0,0 +1,96 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (c) 2021, MediaTek Inc.
> + * Copyright (c) 2021-2023, Intel Corporation.
> + */
> +
> +#define pr_fmt(fmt) KBUILD_MODNAME ":t7xx:%s: " fmt, __func__
> +#define dev_fmt(fmt) "t7xx: " fmt
> +
> +#include <linux/delay.h>
> +#include <linux/pci.h>
> +#include <linux/spinlock.h>
> +#include <linux/workqueue.h>
> +
> +#include "t7xx_pci.h"
> +#include "t7xx_pci_rescan.h"
> +
> +static struct remove_rescan_context t7xx_rescan_ctx;
> +
> +void t7xx_pci_dev_rescan(void)
> +{
> + struct pci_bus *b = NULL;
> +
> + pci_lock_rescan_remove();
> + while ((b = pci_find_next_bus(b)))
> + pci_rescan_bus(b);
> + pci_unlock_rescan_remove();
> +}
> +
> +void t7xx_rescan_done(void)
> +{
> + if (!atomic_read(&t7xx_rescan_ctx.rescan_done)) {
> + atomic_set(&t7xx_rescan_ctx.rescan_done, 1);
> + pr_debug("Rescan probe\n");
> + } else {
> + pr_debug("Init probe\n");
> + }
> +}
> +
> +static void t7xx_remove_rescan(struct work_struct *work)
> +{
> + int num_retries = RESCAN_RETRIES;
> + struct pci_dev *pdev;
> +
> + atomic_set(&t7xx_rescan_ctx.rescan_done, 0);
> + pdev = t7xx_rescan_ctx.dev;
> +
> + if (pdev) {
> + pci_stop_and_remove_bus_device_locked(pdev);
> + pr_debug("start remove and rescan flow\n");
> + }
> +
> + do {
> + t7xx_pci_dev_rescan();
> +
> + if (atomic_read(&t7xx_rescan_ctx.rescan_done))
> + break;
> +
> + msleep(DELAY_RESCAN_MTIME);
> + } while (num_retries--);
> +}
> +
> +void t7xx_rescan_queue_work(struct pci_dev *pdev)
> +{
> + if (!atomic_read(&t7xx_rescan_ctx.rescan_done)) {
> + dev_err(&pdev->dev, "Rescan failed\n");
> + return;
> + }
> +
> + t7xx_rescan_ctx.dev = pdev;
> + queue_work(t7xx_rescan_ctx.pcie_rescan_wq, &t7xx_rescan_ctx.service_task);
> +}
> +
> +int t7xx_rescan_init(void)
> +{
> + atomic_set(&t7xx_rescan_ctx.rescan_done, 1);
> + t7xx_rescan_ctx.dev = NULL;
> +
> + t7xx_rescan_ctx.pcie_rescan_wq = create_singlethread_workqueue(MTK_RESCAN_WQ);
> + if (!t7xx_rescan_ctx.pcie_rescan_wq) {
> + pr_err("Failed to create workqueue: %s\n", MTK_RESCAN_WQ);
> + return -ENOMEM;
> + }
> +
> + INIT_WORK(&t7xx_rescan_ctx.service_task, t7xx_remove_rescan);
> +
> + return 0;
> +}
> +
> +void t7xx_rescan_deinit(void)
> +{
> + t7xx_rescan_ctx.dev = NULL;
> + atomic_set(&t7xx_rescan_ctx.rescan_done, 0);
> + cancel_work_sync(&t7xx_rescan_ctx.service_task);
> + destroy_workqueue(t7xx_rescan_ctx.pcie_rescan_wq);
> +}
> diff --git a/drivers/net/wwan/t7xx/t7xx_pci_rescan.h b/drivers/net/wwan/t7xx/t7xx_pci_rescan.h
> new file mode 100644
> index 000000000000..80b25c44151c
> --- /dev/null
> +++ b/drivers/net/wwan/t7xx/t7xx_pci_rescan.h
> @@ -0,0 +1,28 @@
> +/* SPDX-License-Identifier: GPL-2.0-only
> + *
> + * Copyright (c) 2021, MediaTek Inc.
> + * Copyright (c) 2021-2023, Intel Corporation.
> + */
> +
> +#ifndef __T7XX_PCI_RESCAN_H__
> +#define __T7XX_PCI_RESCAN_H__
> +
> +#define MTK_RESCAN_WQ "mtk_rescan_wq"
> +
> +#define DELAY_RESCAN_MTIME 1000
> +#define RESCAN_RETRIES 35
> +
> +struct remove_rescan_context {
> + struct work_struct service_task;
> + struct workqueue_struct *pcie_rescan_wq;
> + struct pci_dev *dev;
> + atomic_t rescan_done;
> +};
> +
> +void t7xx_pci_dev_rescan(void);
> +void t7xx_rescan_queue_work(struct pci_dev *pdev);
> +int t7xx_rescan_init(void);
> +void t7xx_rescan_deinit(void);
> +void t7xx_rescan_done(void);
> +
> +#endif /* __T7XX_PCI_RESCAN_H__ */
next prev parent reply other threads:[~2023-01-06 18:42 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-01-06 16:26 [PATCH v3 net-next 0/5] net: wwan: t7xx: fw flashing & coredump support m.chetan.kumar
2023-01-06 16:26 ` [PATCH v3 net-next 1/5] net: wwan: t7xx: Add AP CLDMA m.chetan.kumar
2023-01-06 17:56 ` Jesse Brandeburg
2023-01-06 16:26 ` [PATCH v3 net-next 2/5] net: wwan: t7xx: Infrastructure for early port configuration m.chetan.kumar
2023-01-06 18:31 ` Jesse Brandeburg
2023-01-08 14:07 ` Kumar, M Chetan
2023-01-06 16:27 ` [PATCH v3 net-next 3/5] net: wwan: t7xx: PCIe reset rescan m.chetan.kumar
2023-01-06 18:42 ` Jesse Brandeburg [this message]
2023-01-08 14:14 ` Kumar, M Chetan
2023-01-06 16:27 ` [PATCH v3 net-next 4/5] net: wwan: t7xx: Enable devlink based fw flashing and coredump collection m.chetan.kumar
2023-01-06 18:50 ` Jesse Brandeburg
2023-01-06 16:28 ` [PATCH v3 net-next 5/5] net: wwan: t7xx: Devlink documentation m.chetan.kumar
2023-01-06 18:37 ` Jesse Brandeburg
2023-01-08 14:20 ` Kumar, M Chetan
2023-01-09 3:48 ` Bagas Sanjaya
2023-01-09 16:07 ` Kumar, M Chetan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=6a8b7eee-2af9-b953-8431-875ea9701a89@intel.com \
--to=jesse.brandeburg@intel.com \
--cc=chandrashekar.devegowda@intel.com \
--cc=chiranjeevi.rapolu@linux.intel.com \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=haijun.liu@mediatek.com \
--cc=ilpo.jarvinen@linux.intel.com \
--cc=johannes@sipsolutions.net \
--cc=kuba@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=linuxwwan@intel.com \
--cc=linuxwwan_5g@intel.com \
--cc=loic.poulain@linaro.org \
--cc=m.chetan.kumar@linux.intel.com \
--cc=madhusmita.sahu@intel.com \
--cc=matthias.bgg@gmail.com \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=ricardo.martinez@linux.intel.com \
--cc=ryazanov.s.a@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).