netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: <Pavel.Parkhomenko@baikalelectronics.ru>
To: <michael@stapelberg.de>, <afleming@gmail.com>,
	<f.fainelli@gmail.com>, <andrew@lunn.ch>
Cc: <Alexey.Malahov@baikalelectronics.ru>,
	<Sergey.Semin@baikalelectronics.ru>, <netdev@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>
Subject: [PATCH] net: phy: marvell: Fix RGMII Tx/Rx delays setting in 88e1121-compatible PHYs
Date: Fri, 4 Feb 2022 05:29:11 +0000	[thread overview]
Message-ID: <96759fee7240fd095cb9cc1f6eaf2d9113b57cf0.camel@baikalelectronics.ru> (raw)

It is mandatory for a software to issue a reset upon modifying RGMII
Receive Timing Control and RGMII Transmit Timing Control bit fields of MAC
Specific Control register 2 (page 2, register 21) otherwise the changes
won't be perceived by the PHY (the same is applicable for a lot of other
registers). Not setting the RGMII delays on the platforms that imply
it's being done on the PHY side will consequently cause the traffic loss.
We discovered that the denoted soft-reset is missing in the
m88e1121_config_aneg() method for the case if the RGMII delays are
modified but the MDIx polarity isn't changed or the auto-negotiation is
left enabled, thus causing the traffic loss on our platform with Marvell
Alaska 88E1510 installed. Let's fix that by issuing the soft-reset if the
delays have been actually set in the m88e1121_config_aneg_rgmii_delays()
method.

Fixes: d6ab93364734 ("net: phy: marvell: Avoid unnecessary soft reset")
Signed-off-by: Pavel Parkhomenko <Pavel.Parkhomenko@baikalelectronics.ru>
Reviewed-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Cc: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Cc: netdev@vger.kernel.org
Cc: linux-kernel@vger.kernel.org

---
 drivers/net/phy/marvell.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
index 4fcfca4e1702..a4f685927a64 100644
--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c
@@ -551,9 +551,9 @@ static int m88e1121_config_aneg_rgmii_delays(struct
phy_device *phydev)
 	else
 		mscr = 0;
 
-	return phy_modify_paged(phydev, MII_MARVELL_MSCR_PAGE,
-				MII_88E1121_PHY_MSCR_REG,
-				MII_88E1121_PHY_MSCR_DELAY_MASK, mscr);
+	return phy_modify_paged_changed(phydev, MII_MARVELL_MSCR_PAGE,
+					MII_88E1121_PHY_MSCR_REG,
+					MII_88E1121_PHY_MSCR_DELAY_MASK, mscr);
 }
 
 static int m88e1121_config_aneg(struct phy_device *phydev)
@@ -567,11 +567,13 @@ static int m88e1121_config_aneg(struct phy_device *phydev)
 			return err;
 	}
 
+	changed = err;
+
 	err = marvell_set_polarity(phydev, phydev->mdix_ctrl);
 	if (err < 0)
 		return err;
 
-	changed = err;
+	changed |= err;
 
 	err = genphy_config_aneg(phydev);
 	if (err < 0)
-- 
2.34.1



             reply	other threads:[~2022-02-04  5:29 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-02-04  5:29 Pavel.Parkhomenko [this message]
2022-02-04  9:56 ` [PATCH] net: phy: marvell: Fix RGMII Tx/Rx delays setting in 88e1121-compatible PHYs Serge Semin
2022-02-04 10:41   ` Russell King (Oracle)
2022-02-04 13:10 ` Andrew Lunn
2022-02-05 15:22   ` Pavel.Parkhomenko
2022-02-05 16:25     ` Andrew Lunn
2022-02-05  4:02 ` Jakub Kicinski
2022-02-05 20:39 ` [PATCH net v2] " Pavel Parkhomenko
2022-02-07 17:40   ` Jakub Kicinski
2022-02-07 18:33     ` Serge Semin
2022-02-07 19:22       ` Jakub Kicinski
2022-02-08  3:58         ` Jakub Kicinski
2022-02-08  4:10   ` patchwork-bot+netdevbpf

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=96759fee7240fd095cb9cc1f6eaf2d9113b57cf0.camel@baikalelectronics.ru \
    --to=pavel.parkhomenko@baikalelectronics.ru \
    --cc=Alexey.Malahov@baikalelectronics.ru \
    --cc=Sergey.Semin@baikalelectronics.ru \
    --cc=afleming@gmail.com \
    --cc=andrew@lunn.ch \
    --cc=f.fainelli@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=michael@stapelberg.de \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).