From mboxrd@z Thu Jan 1 00:00:00 1970 From: Duan Fugang-B38611 Subject: RE: [PATCH net-next v1 1/1] net: fec: Add VLAN receive HW support. Date: Wed, 26 Jun 2013 11:18:27 +0000 Message-ID: <9848F2DB572E5649BA045B288BE08FBE01501A58@039-SN2MPN1-023.039d.mgd.msft.net> References: <1372204524-27798-1-git-send-email-jim_baxter@mentor.com> <9848F2DB572E5649BA045B288BE08FBE014FE4E1@039-SN2MPN1-023.039d.mgd.msft.net> <51CABDD0.7050606@mentor.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 8BIT Cc: "David S. Miller" , Li Frank-B20596 , Estevam Fabio-R49496 , Lucas Stach , Shawn Guo , "netdev@vger.kernel.org" , Ben Hutchings To: Jim Baxter Return-path: Received: from mail-db9lp0249.outbound.messaging.microsoft.com ([213.199.154.249]:52786 "EHLO db9outboundpool.messaging.microsoft.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751683Ab3FZLdh convert rfc822-to-8bit (ORCPT ); Wed, 26 Jun 2013 07:33:37 -0400 In-Reply-To: <51CABDD0.7050606@mentor.com> Content-Language: en-US Sender: netdev-owner@vger.kernel.org List-ID: On 06/26/13 18:09, Jim Baxter wrote: > > In addition, > > 1. enet IP support hw VLAN detect such as imx28-fec, imx6q-fec and mvf600-fec, so you can add the "BD_ENET_RX_VLAN " to those platform driver_data. > I have only tested it on the i.MX6, if someone wants to check it on the > imx28 later they can add it to that option. > > 2. Enable the VLAN tag extraction with "NETIF_F_HW_VLAN_CTAG_RX" feature in .ndo_fix_features, which is configured by user. > What do you mean by this, I am only enabling the VLAN code if (ndev->features & NETIF_F_HW_VLAN_CTAG_RX) is set. I am pretty sure this is set by You can enable the feature like below, which is reasonable. .ndo_fix_features = fec_enet_fix_features static netdev_features_t fec_enet_fix_features (struct net_device *dev, netdev_features_t features) { struct fec_enet_private *fep = netdev_priv(dev); const struct platform_device_id *id_entry = platform_get_device_id(fep->pdev); if (id_entry->driver_data & FEC_QUIRK_HAS_VLAN) features |= NETIF_F_HW_VLAN_CTAG_RX; return features; } Thank you, Andy