From: Jose Abreu <Jose.Abreu@synopsys.com>
To: netdev@vger.kernel.org
Cc: Joao Pinto <Joao.Pinto@synopsys.com>,
Jose Abreu <Jose.Abreu@synopsys.com>,
Giuseppe Cavallaro <peppe.cavallaro@st.com>,
Alexandre Torgue <alexandre.torgue@st.com>,
Jose Abreu <Jose.Abreu@synopsys.com>,
"David S. Miller" <davem@davemloft.net>,
Maxime Coquelin <mcoquelin.stm32@gmail.com>,
linux-stm32@st-md-mailman.stormreply.com,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: [PATCH net-next v3 7/8] net: stmmac: selftests: Switch to dev_direct_xmit()
Date: Mon, 13 Jan 2020 17:24:15 +0100 [thread overview]
Message-ID: <98c64074079767307ee3bb1664d298d17bebf6ea.1578932287.git.Jose.Abreu@synopsys.com> (raw)
In-Reply-To: <cover.1578932287.git.Jose.Abreu@synopsys.com>
In-Reply-To: <cover.1578932287.git.Jose.Abreu@synopsys.com>
In the upcoming commit for TBS selftest we will need to send a packet on
a specific Queue. As stmmac fallsback to netdev_pick_tx() on the select
Queue callback, we need to switch all selftests logic to
dev_direct_xmit() so that we can send the given SKB on a specific Queue.
Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com>
---
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Jose Abreu <joabreu@synopsys.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: netdev@vger.kernel.org
Cc: linux-stm32@st-md-mailman.stormreply.com
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
---
.../net/ethernet/stmicro/stmmac/stmmac_selftests.c | 25 ++++++----------------
1 file changed, 6 insertions(+), 19 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_selftests.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_selftests.c
index 13227909287c..d50ae59fe3d8 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_selftests.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_selftests.c
@@ -339,8 +339,7 @@ static int __stmmac_test_loopback(struct stmmac_priv *priv,
goto cleanup;
}
- skb_set_queue_mapping(skb, attr->queue_mapping);
- ret = dev_queue_xmit(skb);
+ ret = dev_direct_xmit(skb, attr->queue_mapping);
if (ret)
goto cleanup;
@@ -926,8 +925,7 @@ static int __stmmac_test_vlanfilt(struct stmmac_priv *priv)
goto vlan_del;
}
- skb_set_queue_mapping(skb, 0);
- ret = dev_queue_xmit(skb);
+ ret = dev_direct_xmit(skb, 0);
if (ret)
goto vlan_del;
@@ -1018,8 +1016,7 @@ static int __stmmac_test_dvlanfilt(struct stmmac_priv *priv)
goto vlan_del;
}
- skb_set_queue_mapping(skb, 0);
- ret = dev_queue_xmit(skb);
+ ret = dev_direct_xmit(skb, 0);
if (ret)
goto vlan_del;
@@ -1286,8 +1283,7 @@ static int stmmac_test_vlanoff_common(struct stmmac_priv *priv, bool svlan)
__vlan_hwaccel_put_tag(skb, htons(proto), tpriv->vlan_id);
skb->protocol = htons(proto);
- skb_set_queue_mapping(skb, 0);
- ret = dev_queue_xmit(skb);
+ ret = dev_direct_xmit(skb, 0);
if (ret)
goto vlan_del;
@@ -1639,8 +1635,7 @@ static int stmmac_test_arpoffload(struct stmmac_priv *priv)
if (ret)
goto cleanup;
- skb_set_queue_mapping(skb, 0);
- ret = dev_queue_xmit(skb);
+ ret = dev_direct_xmit(skb, 0);
if (ret)
goto cleanup_promisc;
@@ -1869,7 +1864,6 @@ void stmmac_selftest_run(struct net_device *dev,
{
struct stmmac_priv *priv = netdev_priv(dev);
int count = stmmac_selftest_get_count(priv);
- int carrier = netif_carrier_ok(dev);
int i, ret;
memset(buf, 0, sizeof(*buf) * count);
@@ -1879,15 +1873,12 @@ void stmmac_selftest_run(struct net_device *dev,
netdev_err(priv->dev, "Only offline tests are supported\n");
etest->flags |= ETH_TEST_FL_FAILED;
return;
- } else if (!carrier) {
+ } else if (!netif_carrier_ok(dev)) {
netdev_err(priv->dev, "You need valid Link to execute tests\n");
etest->flags |= ETH_TEST_FL_FAILED;
return;
}
- /* We don't want extra traffic */
- netif_carrier_off(dev);
-
/* Wait for queues drain */
msleep(200);
@@ -1942,10 +1933,6 @@ void stmmac_selftest_run(struct net_device *dev,
break;
}
}
-
- /* Restart everything */
- if (carrier)
- netif_carrier_on(dev);
}
void stmmac_selftest_get_strings(struct stmmac_priv *priv, u8 *data)
--
2.7.4
next prev parent reply other threads:[~2020-01-13 16:25 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-01-13 16:24 [PATCH net-next v3 0/8] net: stmmac: ETF support Jose Abreu
2020-01-13 16:24 ` [PATCH net-next v3 1/8] net: stmmac: Initial support for TBS Jose Abreu
2020-01-13 16:24 ` [PATCH net-next v3 2/8] net: stmmac: tc: Add support for ETF Scheduler using TBS Jose Abreu
2020-01-13 16:24 ` [PATCH net-next v3 3/8] net: stmmac: xgmac: Add TBS support Jose Abreu
2020-01-13 16:24 ` [PATCH net-next v3 4/8] net: stmmac: gmac4+: " Jose Abreu
2020-01-13 16:24 ` [PATCH net-next v3 5/8] net: stmmac: pci: Enable TBS on GMAC5 IPK PCI entry Jose Abreu
2020-01-13 16:24 ` [PATCH net-next v3 6/8] net: stmmac: Add missing information in DebugFS capabilities file Jose Abreu
2020-01-13 16:24 ` Jose Abreu [this message]
2020-01-13 16:24 ` [PATCH net-next v3 8/8] net: stmmac: selftests: Add a test for TBS feature Jose Abreu
2020-01-14 3:26 ` [PATCH net-next v3 0/8] net: stmmac: ETF support Jakub Kicinski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=98c64074079767307ee3bb1664d298d17bebf6ea.1578932287.git.Jose.Abreu@synopsys.com \
--to=jose.abreu@synopsys.com \
--cc=Joao.Pinto@synopsys.com \
--cc=alexandre.torgue@st.com \
--cc=davem@davemloft.net \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=mcoquelin.stm32@gmail.com \
--cc=netdev@vger.kernel.org \
--cc=peppe.cavallaro@st.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).