From mboxrd@z Thu Jan  1 00:00:00 1970
From: =?UTF-8?B?UmFmYcWCIE1pxYJlY2tp?= <zajec5@gmail.com>
Subject: Re: sky2 negotiating only 100Mb/s (88E8055)
Date: Fri, 15 Mar 2013 13:03:01 +0100
Message-ID: <CACna6ryokPsaKVQmrF3ACmy99k3LiaOiZai5xrWdVjaxLWT80w@mail.gmail.com>
References: <CACna6ry1z1LS9wMDb9dYyM+9z8kEpZADXKHL0NNoAahbm8wbNg@mail.gmail.com>
Mime-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: QUOTED-PRINTABLE
To: Network Development <netdev@vger.kernel.org>,
	Mirko Lindner <mlindner@marvell.com>,
	Stephen Hemminger <stephen@networkplumber.org>
Return-path: <netdev-owner@vger.kernel.org>
Received: from mail-oa0-f52.google.com ([209.85.219.52]:40726 "EHLO
	mail-oa0-f52.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org
	with ESMTP id S1754089Ab3COMDC convert rfc822-to-8bit (ORCPT
	<rfc822;netdev@vger.kernel.org>); Fri, 15 Mar 2013 08:03:02 -0400
Received: by mail-oa0-f52.google.com with SMTP id k14so3215234oag.25
        for <netdev@vger.kernel.org>; Fri, 15 Mar 2013 05:03:01 -0700 (PDT)
In-Reply-To: <CACna6ry1z1LS9wMDb9dYyM+9z8kEpZADXKHL0NNoAahbm8wbNg@mail.gmail.com>
Sender: netdev-owner@vger.kernel.org
List-ID: <netdev.vger.kernel.org>

2013/3/3 Rafa=C5=82 Mi=C5=82ecki <zajec5@gmail.com>:
> I've problems with my:
> 08:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd.
> 88E8055 PCI-E Gigabit Ethernet Controller [11ab:4363] (rev 13)
> using 3.4.28 kernel on my Sony notebook.
>
> I've tried connecting it to the:
> 1) HP#1 (Intel card)
> 2) HP#2 (Broadcom card)
> 3) Router based on BCM4706 with BCM53125 switch
> I've tried two different CAT5e cables for all the above devices. In
> every case sky2 established 100Mbps link only. It couldn't achieve
> 1000Mb/s. Forcing it to 1000Mbps broke link. Lower speeds (100 half
> duplex and 10 Mbps) are working fine.
>
> It's not the issue with the cable or devices, because all other
> configurations are working fine. I can connect:
> 1) HP#1 with HP#2
> 2) HP#1 with router
> 3) HP#2 with router
> and I always get 1000Mbps.
>
> So it looks like some bugged hardware or (more likely?) issue in sky2=
=2E
>
> sky2 0000:08:00.0: eth0: disabling interface
> sky2: driver version 1.30
> sky2 0000:08:00.0: Yukon-2 EC Ultra chip revision 3
> sky2 0000:08:00.0: irq 47 for MSI/MSI-X
> sky2 0000:08:00.0: eth0: addr 00:1d:ba:19:9e:db
> sky2 0000:08:00.0: eth0: enabling interface
> sky2 0000:08:00.0: eth0: Link is up at 100 Mbps, full duplex, flow co=
ntrol both
>
> Can you help me with that?

Ping?

--=20
Rafa=C5=82