netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: James Hughes <james.hughes@raspberrypi.org>
To: Eric Dumazet <edumazet@google.com>
Cc: netdev <netdev@vger.kernel.org>,
	RENARD Pierre-Francois <pfrenard@gmail.com>,
	Stefan Wahren <stefan.wahren@i2se.com>,
	Woojung Huh <woojung.huh@microchip.com>,
	Microchip Linux Driver Support <UNGLinuxDriver@microchip.com>
Subject: Re: [PATCH net] net: usb: lan78xx: limit size of local TSO packets
Date: Thu, 16 Jan 2020 21:28:47 +0000	[thread overview]
Message-ID: <CAE_XsMKS+v8za9GEFLwgLiPTu5XQPK1JeVzMisdhhjeGtEwyxg@mail.gmail.com> (raw)
In-Reply-To: <CANn89iJ6pWQxmWqgTBtdCo4xbdbjR31cFZS0yVnoEiTKZ3XT6Q@mail.gmail.com>

On Thu, 16 Jan 2020 at 16:07, Eric Dumazet <edumazet@google.com> wrote:
>
> On Thu, Jan 16, 2020 at 8:05 AM Eric Dumazet <edumazet@google.com> wrote:
> >
> > On Thu, Jan 16, 2020 at 6:26 AM James Hughes
> > <james.hughes@raspberrypi.org> wrote:
> > >
> > > Following on from Eric comment below, is this patch suitable for the
> > > forwarded packets case? I'm not familiar enough to be sure, and not
> > > aware of any way to test it. I've testing ethernet functionality on a
> > > Pi3B+ and see no regressions.
> > >
> > > Content of format patch of the commit, if it seems OK I'll submit a
> > > proper patch email.
> > >
> > > From b7f06bf6298904b106c38b4bac06a6fcebeee47e Mon Sep 17 00:00:00 2001
> > > From: James Hughes <james.hughes@raspberrypi.org>
> > > Date: Wed, 15 Jan 2020 13:41:54 +0000
> > > Subject: [PATCH] net: usb: lan78xx: Add .ndo_features_check
> > >
> > > As reported by Eric Dumazet, the driver does not handle skb's
> > > over a certain size in all possible cases. Most cases have been fixed,
> > > this patch should ensure that forwarded TSO packets that are greater than
> > > MAX_SINGLE_PACKET_SIZE - header size are software segmented and handled
> > > correctly.
> > >
> > > Signed-off-by: James Hughes <james.hughes@raspberrypi.org>
> > > ---
> > >  drivers/net/usb/lan78xx.c | 15 +++++++++++++++
> > >  1 file changed, 15 insertions(+)
> > >
> > > diff --git a/drivers/net/usb/lan78xx.c b/drivers/net/usb/lan78xx.c
> > > index bc572b921fe1..3c721dc1fc10 100644
> > > --- a/drivers/net/usb/lan78xx.c
> > > +++ b/drivers/net/usb/lan78xx.c
> > > @@ -31,6 +31,7 @@
> > >  #include <linux/mdio.h>
> > >  #include <linux/phy.h>
> > >  #include <net/ip6_checksum.h>
> > > +#include <net/vxlan.h>
> > >  #include <linux/interrupt.h>
> > >  #include <linux/irqdomain.h>
> > >  #include <linux/irq.h>
> > > @@ -3733,6 +3734,19 @@ static void lan78xx_tx_timeout(struct net_device *net)
> > >   tasklet_schedule(&dev->bh);
> > >  }
> > >
> > > +static netdev_features_t lan78xx_features_check(struct sk_buff *skb,
> > > + struct net_device *netdev,
> > > + netdev_features_t features)
> > > +{
> > > + if (skb_shinfo(skb)->gso_size > MAX_SINGLE_PACKET_SIZE - MAX_HEADER)
> > > + features &= ~NETIF_F_TSO;
> > >
> >
> > Here gso_size is the payload size of each segment (typically around 1428 bytes)
> >
> > What you need here is testing the whole packet length (no need to care
> > about MAX_HEADER btw)
> >
> > Also prefer ~NETIF_F_GSO_MASK (otherwise IPv6 will still be broken)
> >
> > if (skb->len > MAX_SINGLE_PACKET_SIZE)
>
> And it seems you need to account for TX_OVERHEAD (8 additional bytes)
> that are added later in the ndo_start_xmit()
>
> if (skb->len + TX_OVERHEAD > MAX_SINGLE_PACKET_SIZE)
> ....
>
> >     features &= ~NETIF_F_GSO_MASK;
> >

Got it, thanks! Will redo the patch as indicated and submit correctly tomorrow.

James



> >  +
> > > + features = vlan_features_check(skb, features);
> > > + features = vxlan_features_check(skb, features);
> > > +
> > > + return features;
> > > +}
> > > +
> > >  static const struct net_device_ops lan78xx_netdev_ops = {
> > >   .ndo_open = lan78xx_open,
> > >   .ndo_stop = lan78xx_stop,
> > > @@ -3746,6 +3760,7 @@ static const struct net_device_ops lan78xx_netdev_ops = {
> > >   .ndo_set_features = lan78xx_set_features,
> > >   .ndo_vlan_rx_add_vid = lan78xx_vlan_rx_add_vid,
> > >   .ndo_vlan_rx_kill_vid = lan78xx_vlan_rx_kill_vid,
> > > + .ndo_features_check = lan78xx_features_check,
> > >  };
> > >
> > >  static void lan78xx_stat_monitor(struct timer_list *t)
> > > --
> > > 2.17.1
> > >
> > >
> > > On Mon, 13 Jan 2020 at 17:27, Eric Dumazet <edumazet@google.com> wrote:
> > > >
> > > > lan78xx_tx_bh() makes sure to not exceed MAX_SINGLE_PACKET_SIZE
> > > > bytes in the aggregated packets it builds, but does
> > > > nothing to prevent large GSO packets being submitted.
> > > >
> > > > Pierre-Francois reported various hangs when/if TSO is enabled.
> > > >
> > > > For localy generated packets, we can use netif_set_gso_max_size()
> > > > to limit the size of TSO packets.
> > > >
> > > > Note that forwarded packets could still hit the issue,
> > > > so a complete fix might require implementing .ndo_features_check
> > > > for this driver, forcing a software segmentation if the size
> > > > of the TSO packet exceeds MAX_SINGLE_PACKET_SIZE.
> > > >
> > > > Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver")
> > > > Signed-off-by: Eric Dumazet <edumazet@google.com>
> > > > Reported-by: RENARD Pierre-Francois <pfrenard@gmail.com>
> > > > Tested-by: RENARD Pierre-Francois <pfrenard@gmail.com>
> > > > Cc: Stefan Wahren <stefan.wahren@i2se.com>
> > > > Cc: Woojung Huh <woojung.huh@microchip.com>
> > > > Cc: Microchip Linux Driver Support <UNGLinuxDriver@microchip.com>
> > > > ---
> > > >  drivers/net/usb/lan78xx.c | 1 +
> > > >  1 file changed, 1 insertion(+)
> > > >
> > > > diff --git a/drivers/net/usb/lan78xx.c b/drivers/net/usb/lan78xx.c
> > > > index fb4781080d6dec2af22f41c5e064350ea74130b3..75bdfae5f3e20afef3d2880171c7c6e8511546c5 100644
> > > > --- a/drivers/net/usb/lan78xx.c
> > > > +++ b/drivers/net/usb/lan78xx.c
> > > > @@ -3750,6 +3750,7 @@ static int lan78xx_probe(struct usb_interface *intf,
> > > >
> > > >         /* MTU range: 68 - 9000 */
> > > >         netdev->max_mtu = MAX_SINGLE_PACKET_SIZE;
> > > > +       netif_set_gso_max_size(netdev, MAX_SINGLE_PACKET_SIZE - MAX_HEADER);
> > > >
> > > >         dev->ep_blkin = (intf->cur_altsetting)->endpoint + 0;
> > > >         dev->ep_blkout = (intf->cur_altsetting)->endpoint + 1;
> > > > --
> > > > 2.25.0.rc1.283.g88dfdc4193-goog
> > > >

      reply	other threads:[~2020-01-16 21:29 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-01-13 17:27 [PATCH net] net: usb: lan78xx: limit size of local TSO packets Eric Dumazet
2020-01-14 19:05 ` David Miller
2020-01-16 14:26 ` James Hughes
2020-01-16 16:05   ` Eric Dumazet
2020-01-16 16:07     ` Eric Dumazet
2020-01-16 21:28       ` James Hughes [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=CAE_XsMKS+v8za9GEFLwgLiPTu5XQPK1JeVzMisdhhjeGtEwyxg@mail.gmail.com \
    --to=james.hughes@raspberrypi.org \
    --cc=UNGLinuxDriver@microchip.com \
    --cc=edumazet@google.com \
    --cc=netdev@vger.kernel.org \
    --cc=pfrenard@gmail.com \
    --cc=stefan.wahren@i2se.com \
    --cc=woojung.huh@microchip.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).