netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Willem de Bruijn <willemdebruijn.kernel@gmail.com>
To: Dongseok Yi <dseok.yi@samsung.com>
Cc: "David S. Miller" <davem@davemloft.net>,
	Jakub Kicinski <kuba@kernel.org>,
	Miaohe Lin <linmiaohe@huawei.com>,
	Willem de Bruijn <willemb@google.com>,
	Paolo Abeni <pabeni@redhat.com>, Florian Westphal <fw@strlen.de>,
	Al Viro <viro@zeniv.linux.org.uk>,
	Guillaume Nault <gnault@redhat.com>,
	Yunsheng Lin <linyunsheng@huawei.com>,
	Steffen Klassert <steffen.klassert@secunet.com>,
	Yadu Kishore <kyk.segfault@gmail.com>,
	Marco Elver <elver@google.com>,
	Network Development <netdev@vger.kernel.org>,
	LKML <linux-kernel@vger.kernel.org>,
	namkyu78.kim@samsung.com
Subject: Re: [PATCH net] net: fix use-after-free when UDP GRO with shared fraglist
Date: Wed, 6 Jan 2021 12:13:33 -0500	[thread overview]
Message-ID: <CAF=yD-+w489MoSKfpaH23dYXhVCL2qh4f0x4COd2nsT5DT8Aiw@mail.gmail.com> (raw)
In-Reply-To: <019b01d6e3dc$9a940330$cfbc0990$@samsung.com>

On Tue, Jan 5, 2021 at 10:32 PM Dongseok Yi <dseok.yi@samsung.com> wrote:
>
> On 2021-01-06 12:07, Willem de Bruijn wrote:
> >
> > On Tue, Jan 5, 2021 at 8:29 PM Dongseok Yi <dseok.yi@samsung.com> wrote:
> > >
> > > On 2021-01-05 06:03, Willem de Bruijn wrote:
> > > >
> > > > On Mon, Jan 4, 2021 at 4:00 AM Dongseok Yi <dseok.yi@samsung.com> wrote:
> > > > >
> > > > > skbs in frag_list could be shared by pskb_expand_head() from BPF.
> > > >
> > > > Can you elaborate on the BPF connection?
> > >
> > > With the following registered ptypes,
> > >
> > > /proc/net # cat ptype
> > > Type Device      Function
> > > ALL           tpacket_rcv
> > > 0800          ip_rcv.cfi_jt
> > > 0011          llc_rcv.cfi_jt
> > > 0004          llc_rcv.cfi_jt
> > > 0806          arp_rcv
> > > 86dd          ipv6_rcv.cfi_jt
> > >
> > > BPF checks skb_ensure_writable between tpacket_rcv and ip_rcv
> > > (or ipv6_rcv). And it calls pskb_expand_head.
> > >
> > > [  132.051228] pskb_expand_head+0x360/0x378
> > > [  132.051237] skb_ensure_writable+0xa0/0xc4
> > > [  132.051249] bpf_skb_pull_data+0x28/0x60
> > > [  132.051262] bpf_prog_331d69c77ea5e964_schedcls_ingres+0x5f4/0x1000
> > > [  132.051273] cls_bpf_classify+0x254/0x348
> > > [  132.051284] tcf_classify+0xa4/0x180
> >
> > Ah, you have a BPF program loaded at TC. That was not entirely obvious.
> >
> > This program gets called after packet sockets with ptype_all, before
> > those with a specific protocol.
> >
> > Tcpdump will have inserted a program with ptype_all, which cloned the
> > skb. This triggers skb_ensure_writable -> pskb_expand_head ->
> > skb_clone_fraglist -> skb_get.
> >
> > > [  132.051294] __netif_receive_skb_core+0x590/0xd28
> > > [  132.051303] __netif_receive_skb+0x50/0x17c
> > > [  132.051312] process_backlog+0x15c/0x1b8
> > >
> > > >
> > > > > While tcpdump, sk_receive_queue of PF_PACKET has the original frag_list.
> > > > > But the same frag_list is queued to PF_INET (or PF_INET6) as the fraglist
> > > > > chain made by skb_segment_list().
> > > > >
> > > > > If the new skb (not frag_list) is queued to one of the sk_receive_queue,
> > > > > multiple ptypes can see this. The skb could be released by ptypes and
> > > > > it causes use-after-free.
> > > >
> > > > If I understand correctly, a udp-gro-list skb makes it up the receive
> > > > path with one or more active packet sockets.
> > > >
> > > > The packet socket will call skb_clone after accepting the filter. This
> > > > replaces the head_skb, but shares the skb_shinfo and thus frag_list.
> > > >
> > > > udp_rcv_segment later converts the udp-gro-list skb to a list of
> > > > regular packets to pass these one-by-one to udp_queue_rcv_one_skb.
> > > > Now all the frags are fully fledged packets, with headers pushed
> > > > before the payload. This does not change their refcount anymore than
> > > > the skb_clone in pf_packet did. This should be 1.
> > > >
> > > > Eventually udp_recvmsg will call skb_consume_udp on each packet.
> > > >
> > > > The packet socket eventually also frees its cloned head_skb, which triggers
> > > >
> > > >   kfree_skb_list(shinfo->frag_list)
> > > >     kfree_skb
> > > >       skb_unref
> > > >         refcount_dec_and_test(&skb->users)
> > >
> > > Every your understanding is right, but
> > >
> > > >
> > > > >
> > > > > [ 4443.426215] ------------[ cut here ]------------
> > > > > [ 4443.426222] refcount_t: underflow; use-after-free.
> > > > > [ 4443.426291] WARNING: CPU: 7 PID: 28161 at lib/refcount.c:190
> > > > > refcount_dec_and_test_checked+0xa4/0xc8
> > > > > [ 4443.426726] pstate: 60400005 (nZCv daif +PAN -UAO)
> > > > > [ 4443.426732] pc : refcount_dec_and_test_checked+0xa4/0xc8
> > > > > [ 4443.426737] lr : refcount_dec_and_test_checked+0xa0/0xc8
> > > > > [ 4443.426808] Call trace:
> > > > > [ 4443.426813]  refcount_dec_and_test_checked+0xa4/0xc8
> > > > > [ 4443.426823]  skb_release_data+0x144/0x264
> > > > > [ 4443.426828]  kfree_skb+0x58/0xc4
> > > > > [ 4443.426832]  skb_queue_purge+0x64/0x9c
> > > > > [ 4443.426844]  packet_set_ring+0x5f0/0x820
> > > > > [ 4443.426849]  packet_setsockopt+0x5a4/0xcd0
> > > > > [ 4443.426853]  __sys_setsockopt+0x188/0x278
> > > > > [ 4443.426858]  __arm64_sys_setsockopt+0x28/0x38
> > > > > [ 4443.426869]  el0_svc_common+0xf0/0x1d0
> > > > > [ 4443.426873]  el0_svc_handler+0x74/0x98
> > > > > [ 4443.426880]  el0_svc+0x8/0xc
> > > > >
> > > > > Fixes: 3a1296a38d0c (net: Support GRO/GSO fraglist chaining.)
> > > > > Signed-off-by: Dongseok Yi <dseok.yi@samsung.com>
> > > > > ---
> > > > >  net/core/skbuff.c | 20 +++++++++++++++++++-
> > > > >  1 file changed, 19 insertions(+), 1 deletion(-)
> > > > >
> > > > > diff --git a/net/core/skbuff.c b/net/core/skbuff.c
> > > > > index f62cae3..1dcbda8 100644
> > > > > --- a/net/core/skbuff.c
> > > > > +++ b/net/core/skbuff.c
> > > > > @@ -3655,7 +3655,8 @@ struct sk_buff *skb_segment_list(struct sk_buff *skb,
> > > > >         unsigned int delta_truesize = 0;
> > > > >         unsigned int delta_len = 0;
> > > > >         struct sk_buff *tail = NULL;
> > > > > -       struct sk_buff *nskb;
> > > > > +       struct sk_buff *nskb, *tmp;
> > > > > +       int err;
> > > > >
> > > > >         skb_push(skb, -skb_network_offset(skb) + offset);
> > > > >
> > > > > @@ -3665,11 +3666,28 @@ struct sk_buff *skb_segment_list(struct sk_buff *skb,
> > > > >                 nskb = list_skb;
> > > > >                 list_skb = list_skb->next;
> > > > >
> > > > > +               err = 0;
> > > > > +               if (skb_shared(nskb)) {
> > > >
> > > > I must be missing something still. This does not square with my
> > > > understanding that the two sockets are operating on clones, with each
> > > > frag_list skb having skb->users == 1.
> > > >
> > > > Unless the packet socket patch previously also triggered an
> > > > skb_unclone/pskb_expand_head, as that call skb_clone_fraglist, which
> > > > calls skb_get on each frag_list skb.
> > >
> > > A cloned skb after tpacket_rcv cannot go through skb_ensure_writable
> > > with the original shinfo. pskb_expand_head reallocates the shinfo of
> > > the skb and call skb_clone_fraglist. skb_release_data in
> > > pskb_expand_head could not reduce skb->users of the each frag_list skb
> > > if skb_shinfo(skb)->dataref == 2.
> > >
> > > After the reallocation, skb_shinfo(skb)->dataref == 1 but each frag_list
> > > skb could have skb->users == 2.
> >
> > Yes, that makes sense. skb_clone_fraglist just increments the
> > frag_list skb's refcounts.
> >
> > skb_segment_list must create an unshared struct sk_buff before it
> > changes skb data to insert the protocol headers.
> >
> > > >
> > > >
> > > > > +                       tmp = skb_clone(nskb, GFP_ATOMIC);
> > > > > +                       if (tmp) {
> > > > > +                               kfree_skb(nskb);
> > > > > +                               nskb = tmp;
> > > > > +                               err = skb_unclone(nskb, GFP_ATOMIC);
> >
> > Calling clone and unclone in quick succession looks odd.
> >
> > But you need the first to create a private skb and to trigger the
> > second to create a private copy of the linear data (as well as frags,
> > if any, but these are not touched). So this looks okay.
> >
> > > > > +                       } else {
> > > > > +                               err = -ENOMEM;
> > > > > +                       }
> > > > > +               }
> > > > > +
> > > > >                 if (!tail)
> > > > >                         skb->next = nskb;
> > > > >                 else
> > > > >                         tail->next = nskb;
> > > > >
> > > > > +               if (unlikely(err)) {
> > > > > +                       nskb->next = list_skb;
> >
> > To avoid leaking these skbs when calling kfree_skb_list(skb->next). Is
> > that concern new with this patch, or also needed for the existing
> > error case?
>
> It's new for this patch. nskb can lose next skb due to
> tmp = skb_clone(nskb, GFP_ATOMIC); on the prior. I believe it is not
> needed for the existing errors.

Ah, skb_clone clears the next pointer, indeed. Thanks.

Yes, then this looks correct to me. Thanks for fixing, not an obvious
code path or bug at all.

Acked-by: Willem de Bruijn <willemb@google.com>

The patch is already marked as changes requested in
https://patchwork.kernel.org/project/netdevbpf , so you might have to
resubmit it.

If so, please expand a little bit in the commit message on the fact
that a bpf filter is loaded at TC, which triggers skb_ensure_writable
-> pskb_expand_head -> skb_clone_fraglist -> skb_get on each skb in
the fraglist.

  reply	other threads:[~2021-01-06 17:14 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <CGME20210104085750epcas2p1a5b22559d87df61ef3c8215ae0b470b5@epcas2p1.samsung.com>
2021-01-04  8:46 ` [PATCH net] net: fix use-after-free when UDP GRO with shared fraglist Dongseok Yi
2021-01-04 21:03   ` Willem de Bruijn
2021-01-06  1:29     ` Dongseok Yi
2021-01-06  3:07       ` Willem de Bruijn
2021-01-06  3:32         ` Dongseok Yi
2021-01-06 17:13           ` Willem de Bruijn [this message]
2021-04-17  3:44           ` Yunsheng Lin
2021-04-19  0:35             ` Dongseok Yi
2021-04-21  9:42               ` Yunsheng Lin
2021-04-21 11:04                 ` Dongseok Yi
     [not found]   ` <CGME20210107005028epcas2p35dfa745fd92e31400024874f54243556@epcas2p3.samsung.com>
2021-01-07  0:39     ` [PATCH net v2] " Dongseok Yi
2021-01-07 11:05       ` Daniel Borkmann
2021-01-07 11:40         ` Dongseok Yi
2021-01-07 12:49           ` Daniel Borkmann
2021-01-07 13:05             ` Willem de Bruijn
2021-01-07 13:33               ` Daniel Borkmann
2021-01-07 14:44                 ` Willem de Bruijn
2021-01-08 10:32                   ` Daniel Borkmann
     [not found]       ` <CGME20210108024017epcas2p455fe96b8483880f9b7a654dbcf600b20@epcas2p4.samsung.com>
2021-01-08  2:28         ` [PATCH net v3] " Dongseok Yi
2021-01-08 10:18           ` Daniel Borkmann
2021-01-09  3:14             ` Jakub Kicinski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='CAF=yD-+w489MoSKfpaH23dYXhVCL2qh4f0x4COd2nsT5DT8Aiw@mail.gmail.com' \
    --to=willemdebruijn.kernel@gmail.com \
    --cc=davem@davemloft.net \
    --cc=dseok.yi@samsung.com \
    --cc=elver@google.com \
    --cc=fw@strlen.de \
    --cc=gnault@redhat.com \
    --cc=kuba@kernel.org \
    --cc=kyk.segfault@gmail.com \
    --cc=linmiaohe@huawei.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linyunsheng@huawei.com \
    --cc=namkyu78.kim@samsung.com \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    --cc=steffen.klassert@secunet.com \
    --cc=viro@zeniv.linux.org.uk \
    --cc=willemb@google.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).