From: George McCollister <george.mccollister@gmail.com>
To: Oleksij Rempel <o.rempel@pengutronix.de>
Cc: Andrew Lunn <andrew@lunn.ch>,
Vivien Didelot <vivien.didelot@gmail.com>,
Florian Fainelli <f.fainelli@gmail.com>,
Vladimir Oltean <olteanv@gmail.com>,
"David S. Miller" <davem@davemloft.net>,
Jakub Kicinski <kuba@kernel.org>,
Russell King <linux@armlinux.org.uk>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
netdev@vger.kernel.org, open list <linux-kernel@vger.kernel.org>,
linux-mips@vger.kernel.org
Subject: Re: [PATCH v4 net-next 2/2] net: dsa: qca: ar9331: export stats64
Date: Fri, 4 Dec 2020 15:40:42 -0600 [thread overview]
Message-ID: <CAFSKS=Pq9=mNXGeTbcTOL-=rp8wWCS2qtHF38eD1HiN=EK0DOQ@mail.gmail.com> (raw)
In-Reply-To: <20201204145624.11713-3-o.rempel@pengutronix.de>
On Fri, Dec 4, 2020 at 8:59 AM Oleksij Rempel <o.rempel@pengutronix.de> wrote:
>
> Add stats support for the ar9331 switch.
>
> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
> ---
> drivers/net/dsa/qca/ar9331.c | 247 ++++++++++++++++++++++++++++++++++-
> 1 file changed, 246 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/net/dsa/qca/ar9331.c b/drivers/net/dsa/qca/ar9331.c
> index 605d7b675216..4c1a4c448d80 100644
> --- a/drivers/net/dsa/qca/ar9331.c
> +++ b/drivers/net/dsa/qca/ar9331.c
> @@ -101,6 +101,57 @@
> AR9331_SW_PORT_STATUS_RX_FLOW_EN | AR9331_SW_PORT_STATUS_TX_FLOW_EN | \
> AR9331_SW_PORT_STATUS_SPEED_M)
>
> +/* MIB registers */
> +#define AR9331_MIB_COUNTER(x) (0x20000 + ((x) * 0x100))
> +
> +#define AR9331_PORT_MIB_rxbroad(_port) (AR9331_MIB_COUNTER(_port) + 0x00)
> +#define AR9331_PORT_MIB_rxpause(_port) (AR9331_MIB_COUNTER(_port) + 0x04)
> +#define AR9331_PORT_MIB_rxmulti(_port) (AR9331_MIB_COUNTER(_port) + 0x08)
> +#define AR9331_PORT_MIB_rxfcserr(_port) (AR9331_MIB_COUNTER(_port) + 0x0c)
> +#define AR9331_PORT_MIB_rxalignerr(_port) (AR9331_MIB_COUNTER(_port) + 0x10)
> +#define AR9331_PORT_MIB_rxrunt(_port) (AR9331_MIB_COUNTER(_port) + 0x14)
> +#define AR9331_PORT_MIB_rxfragment(_port) (AR9331_MIB_COUNTER(_port) + 0x18)
> +#define AR9331_PORT_MIB_rx64byte(_port) (AR9331_MIB_COUNTER(_port) + 0x1c)
> +#define AR9331_PORT_MIB_rx128byte(_port) (AR9331_MIB_COUNTER(_port) + 0x20)
> +#define AR9331_PORT_MIB_rx256byte(_port) (AR9331_MIB_COUNTER(_port) + 0x24)
> +#define AR9331_PORT_MIB_rx512byte(_port) (AR9331_MIB_COUNTER(_port) + 0x28)
> +#define AR9331_PORT_MIB_rx1024byte(_port) (AR9331_MIB_COUNTER(_port) + 0x2c)
> +#define AR9331_PORT_MIB_rx1518byte(_port) (AR9331_MIB_COUNTER(_port) + 0x30)
> +#define AR9331_PORT_MIB_rxmaxbyte(_port) (AR9331_MIB_COUNTER(_port) + 0x34)
> +#define AR9331_PORT_MIB_rxtoolong(_port) (AR9331_MIB_COUNTER(_port) + 0x38)
> +
> +/* 64 bit counter */
> +#define AR9331_PORT_MIB_rxgoodbyte(_port) (AR9331_MIB_COUNTER(_port) + 0x3c)
> +
> +/* 64 bit counter */
> +#define AR9331_PORT_MIB_rxbadbyte(_port) (AR9331_MIB_COUNTER(_port) + 0x44)
> +
> +#define AR9331_PORT_MIB_rxoverflow(_port) (AR9331_MIB_COUNTER(_port) + 0x4c)
> +#define AR9331_PORT_MIB_filtered(_port) (AR9331_MIB_COUNTER(_port) + 0x50)
> +#define AR9331_PORT_MIB_txbroad(_port) (AR9331_MIB_COUNTER(_port) + 0x54)
> +#define AR9331_PORT_MIB_txpause(_port) (AR9331_MIB_COUNTER(_port) + 0x58)
> +#define AR9331_PORT_MIB_txmulti(_port) (AR9331_MIB_COUNTER(_port) + 0x5c)
> +#define AR9331_PORT_MIB_txunderrun(_port) (AR9331_MIB_COUNTER(_port) + 0x60)
> +#define AR9331_PORT_MIB_tx64byte(_port) (AR9331_MIB_COUNTER(_port) + 0x64)
> +#define AR9331_PORT_MIB_tx128byte(_port) (AR9331_MIB_COUNTER(_port) + 0x68)
> +#define AR9331_PORT_MIB_tx256byte(_port) (AR9331_MIB_COUNTER(_port) + 0x6c)
> +#define AR9331_PORT_MIB_tx512byte(_port) (AR9331_MIB_COUNTER(_port) + 0x70)
> +#define AR9331_PORT_MIB_tx1024byte(_port) (AR9331_MIB_COUNTER(_port) + 0x74)
> +#define AR9331_PORT_MIB_tx1518byte(_port) (AR9331_MIB_COUNTER(_port) + 0x78)
> +#define AR9331_PORT_MIB_txmaxbyte(_port) (AR9331_MIB_COUNTER(_port) + 0x7c)
> +#define AR9331_PORT_MIB_txoversize(_port) (AR9331_MIB_COUNTER(_port) + 0x80)
> +
> +/* 64 bit counter */
> +#define AR9331_PORT_MIB_txbyte(_port) (AR9331_MIB_COUNTER(_port) + 0x84)
> +
> +#define AR9331_PORT_MIB_txcollision(_port) (AR9331_MIB_COUNTER(_port) + 0x8c)
> +#define AR9331_PORT_MIB_txabortcol(_port) (AR9331_MIB_COUNTER(_port) + 0x90)
> +#define AR9331_PORT_MIB_txmulticol(_port) (AR9331_MIB_COUNTER(_port) + 0x94)
> +#define AR9331_PORT_MIB_txsinglecol(_port) (AR9331_MIB_COUNTER(_port) + 0x98)
> +#define AR9331_PORT_MIB_txexcdefer(_port) (AR9331_MIB_COUNTER(_port) + 0x9c)
> +#define AR9331_PORT_MIB_txdefer(_port) (AR9331_MIB_COUNTER(_port) + 0xa0)
> +#define AR9331_PORT_MIB_txlatecol(_port) (AR9331_MIB_COUNTER(_port) + 0xa4)
> +
> /* Phy bypass mode
> * ------------------------------------------------------------------------
> * Bit: | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 |10 |11 |12 |13 |14 |15 |
> @@ -154,6 +205,59 @@
> #define AR9331_SW_MDIO_POLL_SLEEP_US 1
> #define AR9331_SW_MDIO_POLL_TIMEOUT_US 20
>
> +#define STATS_INTERVAL_JIFFIES (3 * HZ)
> +
> +struct ar9331_sw_stats {
> + u64 rxbroad;
> + u64 rxpause;
> + u64 rxmulti;
> + u64 rxfcserr;
> + u64 rxalignerr;
> + u64 rxrunt;
> + u64 rxfragment;
> + u64 rx64byte;
> + u64 rx128byte;
> + u64 rx256byte;
> + u64 rx512byte;
> + u64 rx1024byte;
> + u64 rx1518byte;
> + u64 rxmaxbyte;
> + u64 rxtoolong;
> + u64 rxgoodbyte;
> + u64 rxbadbyte;
> + u64 rxoverflow;
> + u64 filtered;
> + u64 txbroad;
> + u64 txpause;
> + u64 txmulti;
> + u64 txunderrun;
> + u64 tx64byte;
> + u64 tx128byte;
> + u64 tx256byte;
> + u64 tx512byte;
> + u64 tx1024byte;
> + u64 tx1518byte;
> + u64 txmaxbyte;
> + u64 txoversize;
> + u64 txbyte;
> + u64 txcollision;
> + u64 txabortcol;
> + u64 txmulticol;
> + u64 txsinglecol;
> + u64 txexcdefer;
> + u64 txdefer;
> + u64 txlatecol;
> +};
> +
> +struct ar9331_sw_priv;
> +struct ar9331_sw_port {
> + int idx;
> + struct ar9331_sw_priv *priv;
> + struct delayed_work mib_read;
> + struct ar9331_sw_stats stats;
> + struct mutex lock; /* stats access */
> +};
> +
> struct ar9331_sw_priv {
> struct device *dev;
> struct dsa_switch ds;
> @@ -165,6 +269,7 @@ struct ar9331_sw_priv {
> struct mii_bus *sbus; /* mdio slave */
> struct regmap *regmap;
> struct reset_control *sw_reset;
> + struct ar9331_sw_port port[AR9331_SW_PORTS];
> };
>
> /* Warning: switch reset will reset last AR9331_SW_MDIO_PHY_MODE_PAGE request
> @@ -424,6 +529,7 @@ static void ar9331_sw_phylink_mac_link_down(struct dsa_switch *ds, int port,
> phy_interface_t interface)
> {
> struct ar9331_sw_priv *priv = (struct ar9331_sw_priv *)ds->priv;
> + struct ar9331_sw_port *p = &priv->port[port];
> struct regmap *regmap = priv->regmap;
> int ret;
>
> @@ -431,6 +537,8 @@ static void ar9331_sw_phylink_mac_link_down(struct dsa_switch *ds, int port,
> AR9331_SW_PORT_STATUS_MAC_MASK, 0);
> if (ret)
> dev_err_ratelimited(priv->dev, "%s: %i\n", __func__, ret);
> +
> + cancel_delayed_work_sync(&p->mib_read);
> }
>
> static void ar9331_sw_phylink_mac_link_up(struct dsa_switch *ds, int port,
> @@ -441,10 +549,13 @@ static void ar9331_sw_phylink_mac_link_up(struct dsa_switch *ds, int port,
> bool tx_pause, bool rx_pause)
> {
> struct ar9331_sw_priv *priv = (struct ar9331_sw_priv *)ds->priv;
> + struct ar9331_sw_port *p = &priv->port[port];
> struct regmap *regmap = priv->regmap;
> u32 val;
> int ret;
>
> + schedule_delayed_work(&p->mib_read, 0);
> +
> val = AR9331_SW_PORT_STATUS_MAC_MASK;
> switch (speed) {
> case SPEED_1000:
> @@ -477,6 +588,123 @@ static void ar9331_sw_phylink_mac_link_up(struct dsa_switch *ds, int port,
> dev_err_ratelimited(priv->dev, "%s: %i\n", __func__, ret);
> }
>
> +static u32 ar9331_stat_get_val(const struct ar9331_sw_priv *priv, u32 reg)
> +{
> + u32 val;
> + int ret;
> +
> + ret = regmap_read(priv->regmap, reg, &val);
> + if (ret) {
> + dev_err_ratelimited(priv->dev, "%s: %i\n", __func__, ret);
> + return 0;
> + }
> +
> + return val;
> +}
> +
> +#define AR9331_READ_STATS(_port, _reg) \
> +{ \
> + const struct ar9331_sw_priv *priv = _port->priv; \
> + struct ar9331_sw_stats *s = &_port->stats; \
> + int idx = _port->idx; \
> +\
> + s->_reg += ar9331_stat_get_val(priv, AR9331_PORT_MIB_##_reg(idx)); \
> +}
> +
> +static void ar9331_read_stats(struct ar9331_sw_port *port)
> +{
> + mutex_lock(&port->lock);
> +
> + AR9331_READ_STATS(port, rxbroad);
> + AR9331_READ_STATS(port, rxpause);
> + AR9331_READ_STATS(port, rxmulti);
> + AR9331_READ_STATS(port, rxfcserr);
> + AR9331_READ_STATS(port, rxalignerr);
> + AR9331_READ_STATS(port, rxrunt);
> + AR9331_READ_STATS(port, rxfragment);
> + AR9331_READ_STATS(port, rx64byte);
> + AR9331_READ_STATS(port, rx128byte);
> + AR9331_READ_STATS(port, rx256byte);
> + AR9331_READ_STATS(port, rx512byte);
> + AR9331_READ_STATS(port, rx1024byte);
> + AR9331_READ_STATS(port, rx1518byte);
> + AR9331_READ_STATS(port, rxmaxbyte);
> + AR9331_READ_STATS(port, rxtoolong);
> + AR9331_READ_STATS(port, rxgoodbyte);
> + AR9331_READ_STATS(port, rxbadbyte);
> + AR9331_READ_STATS(port, rxoverflow);
> + AR9331_READ_STATS(port, filtered);
> + AR9331_READ_STATS(port, txbroad);
> + AR9331_READ_STATS(port, txpause);
> + AR9331_READ_STATS(port, txmulti);
> + AR9331_READ_STATS(port, txunderrun);
> + AR9331_READ_STATS(port, tx64byte);
> + AR9331_READ_STATS(port, tx128byte);
> + AR9331_READ_STATS(port, tx256byte);
> + AR9331_READ_STATS(port, tx512byte);
> + AR9331_READ_STATS(port, tx1024byte);
> + AR9331_READ_STATS(port, tx1518byte);
> + AR9331_READ_STATS(port, txmaxbyte);
> + AR9331_READ_STATS(port, txoversize);
> + AR9331_READ_STATS(port, txbyte);
> + AR9331_READ_STATS(port, txcollision);
> + AR9331_READ_STATS(port, txabortcol);
> + AR9331_READ_STATS(port, txmulticol);
> + AR9331_READ_STATS(port, txsinglecol);
> + AR9331_READ_STATS(port, txexcdefer);
> + AR9331_READ_STATS(port, txdefer);
> + AR9331_READ_STATS(port, txlatecol);
> +
> + mutex_unlock(&port->lock);
> +}
> +
> +static void ar9331_stats_update(struct ar9331_sw_port *port,
> + struct rtnl_link_stats64 *stats)
> +{
> + struct ar9331_sw_stats *s = &port->stats;
> +
> + stats->rx_packets = s->rxbroad + s->rxmulti + s->rx64byte +
> + s->rx128byte + s->rx256byte + s->rx512byte + s->rx1024byte +
> + s->rx1518byte + s->rxmaxbyte;
> + stats->tx_packets = s->txbroad + s->txmulti + s->tx64byte +
> + s->tx128byte + s->tx256byte + s->tx512byte + s->tx1024byte +
> + s->tx1518byte + s->txmaxbyte;
> + stats->rx_bytes = s->rxgoodbyte;
> + stats->tx_bytes = s->txbyte;
> + stats->rx_errors = s->rxfcserr + s->rxalignerr + s->rxrunt +
> + s->rxfragment + s->rxoverflow;
> + stats->tx_errors = s->txoversize;
> + stats->multicast = s->rxmulti;
> + stats->collisions = s->txcollision;
> + stats->rx_length_errors = s->rxrunt + s->rxfragment + s->rxtoolong;
> + stats->rx_crc_errors = s->rxfcserr + s->rxalignerr + s->rxfragment;
> + stats->rx_frame_errors = s->rxalignerr;
> + stats->rx_missed_errors = s->rxoverflow;
> + stats->tx_aborted_errors = s->txabortcol;
> + stats->tx_fifo_errors = s->txunderrun;
> + stats->tx_window_errors = s->txlatecol;
> + stats->rx_nohandler = s->filtered;
Are all of these port->stats accesses always atomic? I'll need to do
something similar in my xrs700x driver and want to make sure there
doesn't need to be a lock between here and where they're updated in
the delayed work.
> +}
> +
> +static void ar9331_do_stats_poll(struct work_struct *work)
> +{
> + struct ar9331_sw_port *port = container_of(work, struct ar9331_sw_port,
> + mib_read.work);
> +
> + ar9331_read_stats(port);
> +
> + schedule_delayed_work(&port->mib_read, STATS_INTERVAL_JIFFIES);
> +}
> +
> +static void ar9331_get_stats64(struct dsa_switch *ds, int port,
> + struct rtnl_link_stats64 *s)
> +{
> + struct ar9331_sw_priv *priv = (struct ar9331_sw_priv *)ds->priv;
> + struct ar9331_sw_port *p = &priv->port[port];
> +
> + ar9331_stats_update(p, s);
> +}
> +
> static const struct dsa_switch_ops ar9331_sw_ops = {
> .get_tag_protocol = ar9331_sw_get_tag_protocol,
> .setup = ar9331_sw_setup,
> @@ -485,6 +713,7 @@ static const struct dsa_switch_ops ar9331_sw_ops = {
> .phylink_mac_config = ar9331_sw_phylink_mac_config,
> .phylink_mac_link_down = ar9331_sw_phylink_mac_link_down,
> .phylink_mac_link_up = ar9331_sw_phylink_mac_link_up,
> + .get_stats64 = ar9331_get_stats64,
> };
>
> static irqreturn_t ar9331_sw_irq(int irq, void *data)
> @@ -796,7 +1025,7 @@ static int ar9331_sw_probe(struct mdio_device *mdiodev)
> {
> struct ar9331_sw_priv *priv;
> struct dsa_switch *ds;
> - int ret;
> + int ret, i;
>
> priv = devm_kzalloc(&mdiodev->dev, sizeof(*priv), GFP_KERNEL);
> if (!priv)
> @@ -831,6 +1060,15 @@ static int ar9331_sw_probe(struct mdio_device *mdiodev)
> ds->ops = &priv->ops;
> dev_set_drvdata(&mdiodev->dev, priv);
>
> + for (i = 0; i < ARRAY_SIZE(priv->port); i++) {
> + struct ar9331_sw_port *port = &priv->port[i];
> +
> + port->idx = i;
> + port->priv = priv;
> + mutex_init(&port->lock);
> + INIT_DELAYED_WORK(&port->mib_read, ar9331_do_stats_poll);
> + }
> +
> ret = dsa_register_switch(ds);
> if (ret)
> goto err_remove_irq;
> @@ -846,6 +1084,13 @@ static int ar9331_sw_probe(struct mdio_device *mdiodev)
> static void ar9331_sw_remove(struct mdio_device *mdiodev)
> {
> struct ar9331_sw_priv *priv = dev_get_drvdata(&mdiodev->dev);
> + unsigned int i;
> +
> + for (i = 0; i < ARRAY_SIZE(priv->port); i++) {
> + struct ar9331_sw_port *port = &priv->port[i];
> +
> + cancel_delayed_work_sync(&port->mib_read);
> + }
>
> irq_domain_remove(priv->irqdomain);
> mdiobus_unregister(priv->mbus);
> --
> 2.29.2
>
next prev parent reply other threads:[~2020-12-04 21:41 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-12-04 14:56 [PATCH v4 net-next 0/2] net: dsa: add stats64 support Oleksij Rempel
2020-12-04 14:56 ` [PATCH v4 net-next 1/2] net: dsa: add optional " Oleksij Rempel
2020-12-04 21:42 ` Florian Fainelli
2020-12-05 14:34 ` Andrew Lunn
2020-12-07 17:21 ` George McCollister
2020-12-04 14:56 ` [PATCH v4 net-next 2/2] net: dsa: qca: ar9331: export stats64 Oleksij Rempel
2020-12-04 21:40 ` George McCollister [this message]
2020-12-04 22:12 ` Andrew Lunn
2020-12-04 22:04 ` George McCollister
2020-12-09 14:06 ` Oleksij Rempel
2020-12-05 14:40 ` Andrew Lunn
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CAFSKS=Pq9=mNXGeTbcTOL-=rp8wWCS2qtHF38eD1HiN=EK0DOQ@mail.gmail.com' \
--to=george.mccollister@gmail.com \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=f.fainelli@gmail.com \
--cc=kernel@pengutronix.de \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mips@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=netdev@vger.kernel.org \
--cc=o.rempel@pengutronix.de \
--cc=olteanv@gmail.com \
--cc=vivien.didelot@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).