netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH bpf-next v4 0/2] libbpf: adding AF_XDP support
@ 2019-02-08 13:05 Magnus Karlsson
  2019-02-08 13:05 ` [PATCH bpf-next v4 1/2] libbpf: add support for using AF_XDP sockets Magnus Karlsson
                   ` (3 more replies)
  0 siblings, 4 replies; 17+ messages in thread
From: Magnus Karlsson @ 2019-02-08 13:05 UTC (permalink / raw)
  To: magnus.karlsson, bjorn.topel, ast, daniel, netdev,
	jakub.kicinski, bjorn.topel, qi.z.zhang
  Cc: brouer, xiaolong.ye

This patch proposes to add AF_XDP support to libbpf. The main reason
for this is to facilitate writing applications that use AF_XDP by
offering higher-level APIs that hide many of the details of the AF_XDP
uapi. This is in the same vein as libbpf facilitates XDP adoption by
offering easy-to-use higher level interfaces of XDP
functionality. Hopefully this will facilitate adoption of AF_XDP, make
applications using it simpler and smaller, and finally also make it
possible for applications to benefit from optimizations in the AF_XDP
user space access code. Previously, people just copied and pasted the
code from the sample application into their application, which is not
desirable.

The proposed interface is composed of two parts:

* Low-level access interface to the four rings and the packet
* High-level control plane interface for creating and setting up umems
  and AF_XDP sockets. This interface also loads a simple XDP program
  that routes all traffic on a queue up to the AF_XDP socket.

The sample program has been updated to use this new interface and in
that process it lost roughly 300 lines of code. I cannot detect any
performance degradations due to the use of this library instead of the
previous functions that were inlined in the sample application. But I
did measure this on a slower machine and not the Broadwell that we
normally use.

The rings are now called xsk_ring and when a producer operates on
it. It is xsk_ring_prod and for a consumer it is xsk_ring_cons. This
way we can get some compile time error checking that the rings are
used correctly.

Comments and contenplations:

* The current behaviour is that the library loads an XDP program (if
  requested to do so) but the clean up of this program is left to the
  application. It would be possible to implement this cleanup in the
  library, but it would require state to be kept on netdev level,
  which there is none at the moment, and the synchronization of this
  between processes. All this adding complexity. But when we get an
  XDP program per queue id, then it becomes trivial to also remove the
  XDP program when the application exits. This proposal from Jesper,
  Björn and others will also improve the performance of libbpf, since
  most of the XDP program code can be removed when that feature is
  supported.

* In a future release, I am planning on adding a higher level data
  plane interface too. This will be based around recvmsg and sendmsg
  with the use of struct iovec for batching, without the user having
  to know anything about the underlying four rings of an AF_XDP
  socket. There will be one semantic difference though from the
  standard recvmsg and that is that the kernel will fill in the iovecs
  instead of the application. But the rest should be the same as the
  libc versions so that application writers feel at home.

Patch 1: adds AF_XDP support in libbpf
Patch 2: updates the xdpsock sample application to use the libbpf functions.

Changes v3 to v4:
  * Dropped the pr_*() patch in favor of Yonghong Song's patch set
  * Addressed the review comments of Daniel Borkmann, mainly leaking
    of file descriptors at clean up and making the data plane APIs
    all static inline (with the exception of xsk_umem__get_data that
    uses an internal structure I do not want to expose).
  * Fixed the netlink callback as suggested by Maciej Fijalkowski.
  * Removed an unecessary include in the sample program as spotted by
    Ilia Fillipov.
Changes v2 to v3:
  * Added automatic loading of a simple XDP program that routes all
    traffic on a queue up to the AF_XDP socket. This program loading
    can be disabled.
  * Updated function names to be consistent with the libbpf naming
    convention
  * Moved all code to xsk.[ch]
  * Removed all the XDP program loading code from the sample since
    this is now done by libbpf
  * The initialization functions now return a handle as suggested by
    Alexei
  * const statements added in the API where applicable.
Changes v1 to v2:
  * Fixed cleanup of library state on error.
  * Moved API to initial version
  * Prefixed all public functions by xsk__ instead of xsk_
  * Added comment about changed default ring sizes, batch size and umem
    size in the sample application commit message
  * The library now only creates an Rx or Tx ring if the respective
    parameter is != NULL

Note that for zero-copy to work on FVL you need the following patch:
https://lore.kernel.org/netdev/1548770597-16141-1-git-send-email-magnus.karlsson@intel.com/.
For ixgbe, you need a similar patch called found here:
https://lore.kernel.org/netdev/CAJ8uoz1GJBmC0GFbURvEzY4kDZZ6C7O9+1F+gV0y=GOMGLobUQ@mail.gmail.com/.

I based this patch set on bpf-next commit a4021a3579c5 ("tools/bpf: add log_level to bpf_load_program_attr")

Thanks: Magnus

Magnus Karlsson (2):
  libbpf: add support for using AF_XDP sockets
  samples/bpf: convert xdpsock to use libbpf for AF_XDP access

 samples/bpf/Makefile              |   1 -
 samples/bpf/xdpsock.h             |  11 -
 samples/bpf/xdpsock_kern.c        |  56 ---
 samples/bpf/xdpsock_user.c        | 839 ++++++++++++--------------------------
 tools/include/uapi/linux/if_xdp.h |  78 ++++
 tools/lib/bpf/Build               |   2 +-
 tools/lib/bpf/Makefile            |   5 +-
 tools/lib/bpf/README.rst          |  11 +-
 tools/lib/bpf/libbpf.map          |   7 +
 tools/lib/bpf/xsk.c               | 742 +++++++++++++++++++++++++++++++++
 tools/lib/bpf/xsk.h               | 205 ++++++++++
 11 files changed, 1306 insertions(+), 651 deletions(-)
 delete mode 100644 samples/bpf/xdpsock.h
 delete mode 100644 samples/bpf/xdpsock_kern.c
 create mode 100644 tools/include/uapi/linux/if_xdp.h
 create mode 100644 tools/lib/bpf/xsk.c
 create mode 100644 tools/lib/bpf/xsk.h

--
2.7.4

^ permalink raw reply	[flat|nested] 17+ messages in thread

* [PATCH bpf-next v4 1/2] libbpf: add support for using AF_XDP sockets
  2019-02-08 13:05 [PATCH bpf-next v4 0/2] libbpf: adding AF_XDP support Magnus Karlsson
@ 2019-02-08 13:05 ` Magnus Karlsson
  2019-02-15 16:37   ` Daniel Borkmann
  2019-02-08 13:05 ` [PATCH bpf-next v4 2/2] samples/bpf: convert xdpsock to use libbpf for AF_XDP access Magnus Karlsson
                   ` (2 subsequent siblings)
  3 siblings, 1 reply; 17+ messages in thread
From: Magnus Karlsson @ 2019-02-08 13:05 UTC (permalink / raw)
  To: magnus.karlsson, bjorn.topel, ast, daniel, netdev,
	jakub.kicinski, bjorn.topel, qi.z.zhang
  Cc: brouer, xiaolong.ye

This commit adds AF_XDP support to libbpf. The main reason for this is
to facilitate writing applications that use AF_XDP by offering
higher-level APIs that hide many of the details of the AF_XDP
uapi. This is in the same vein as libbpf facilitates XDP adoption by
offering easy-to-use higher level interfaces of XDP
functionality. Hopefully this will facilitate adoption of AF_XDP, make
applications using it simpler and smaller, and finally also make it
possible for applications to benefit from optimizations in the AF_XDP
user space access code. Previously, people just copied and pasted the
code from the sample application into their application, which is not
desirable.

The interface is composed of two parts:

* Low-level access interface to the four rings and the packet
* High-level control plane interface for creating and setting
  up umems and af_xdp sockets as well as a simple XDP program.

Tested-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
---
 tools/include/uapi/linux/if_xdp.h |  78 ++++
 tools/lib/bpf/Build               |   2 +-
 tools/lib/bpf/Makefile            |   5 +-
 tools/lib/bpf/README.rst          |  11 +-
 tools/lib/bpf/libbpf.map          |   7 +
 tools/lib/bpf/xsk.c               | 742 ++++++++++++++++++++++++++++++++++++++
 tools/lib/bpf/xsk.h               | 205 +++++++++++
 7 files changed, 1047 insertions(+), 3 deletions(-)
 create mode 100644 tools/include/uapi/linux/if_xdp.h
 create mode 100644 tools/lib/bpf/xsk.c
 create mode 100644 tools/lib/bpf/xsk.h

diff --git a/tools/include/uapi/linux/if_xdp.h b/tools/include/uapi/linux/if_xdp.h
new file mode 100644
index 0000000..caed8b1
--- /dev/null
+++ b/tools/include/uapi/linux/if_xdp.h
@@ -0,0 +1,78 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+/*
+ * if_xdp: XDP socket user-space interface
+ * Copyright(c) 2018 Intel Corporation.
+ *
+ * Author(s): Björn Töpel <bjorn.topel@intel.com>
+ *	      Magnus Karlsson <magnus.karlsson@intel.com>
+ */
+
+#ifndef _LINUX_IF_XDP_H
+#define _LINUX_IF_XDP_H
+
+#include <linux/types.h>
+
+/* Options for the sxdp_flags field */
+#define XDP_SHARED_UMEM	(1 << 0)
+#define XDP_COPY	(1 << 1) /* Force copy-mode */
+#define XDP_ZEROCOPY	(1 << 2) /* Force zero-copy mode */
+
+struct sockaddr_xdp {
+	__u16 sxdp_family;
+	__u16 sxdp_flags;
+	__u32 sxdp_ifindex;
+	__u32 sxdp_queue_id;
+	__u32 sxdp_shared_umem_fd;
+};
+
+struct xdp_ring_offset {
+	__u64 producer;
+	__u64 consumer;
+	__u64 desc;
+};
+
+struct xdp_mmap_offsets {
+	struct xdp_ring_offset rx;
+	struct xdp_ring_offset tx;
+	struct xdp_ring_offset fr; /* Fill */
+	struct xdp_ring_offset cr; /* Completion */
+};
+
+/* XDP socket options */
+#define XDP_MMAP_OFFSETS		1
+#define XDP_RX_RING			2
+#define XDP_TX_RING			3
+#define XDP_UMEM_REG			4
+#define XDP_UMEM_FILL_RING		5
+#define XDP_UMEM_COMPLETION_RING	6
+#define XDP_STATISTICS			7
+
+struct xdp_umem_reg {
+	__u64 addr; /* Start of packet data area */
+	__u64 len; /* Length of packet data area */
+	__u32 chunk_size;
+	__u32 headroom;
+};
+
+struct xdp_statistics {
+	__u64 rx_dropped; /* Dropped for reasons other than invalid desc */
+	__u64 rx_invalid_descs; /* Dropped due to invalid descriptor */
+	__u64 tx_invalid_descs; /* Dropped due to invalid descriptor */
+};
+
+/* Pgoff for mmaping the rings */
+#define XDP_PGOFF_RX_RING			  0
+#define XDP_PGOFF_TX_RING		 0x80000000
+#define XDP_UMEM_PGOFF_FILL_RING	0x100000000ULL
+#define XDP_UMEM_PGOFF_COMPLETION_RING	0x180000000ULL
+
+/* Rx/Tx descriptor */
+struct xdp_desc {
+	__u64 addr;
+	__u32 len;
+	__u32 options;
+};
+
+/* UMEM descriptor is __u64 */
+
+#endif /* _LINUX_IF_XDP_H */
diff --git a/tools/lib/bpf/Build b/tools/lib/bpf/Build
index bfd9bfc..ee9d536 100644
--- a/tools/lib/bpf/Build
+++ b/tools/lib/bpf/Build
@@ -1 +1 @@
-libbpf-y := libbpf.o bpf.o nlattr.o btf.o libbpf_errno.o str_error.o netlink.o bpf_prog_linfo.o libbpf_probes.o
+libbpf-y := libbpf.o bpf.o nlattr.o btf.o libbpf_errno.o str_error.o netlink.o bpf_prog_linfo.o libbpf_probes.o xsk.o
diff --git a/tools/lib/bpf/Makefile b/tools/lib/bpf/Makefile
index 8479162..761691b 100644
--- a/tools/lib/bpf/Makefile
+++ b/tools/lib/bpf/Makefile
@@ -164,6 +164,9 @@ $(BPF_IN): force elfdep bpfdep
 	@(test -f ../../include/uapi/linux/if_link.h -a -f ../../../include/uapi/linux/if_link.h && ( \
 	(diff -B ../../include/uapi/linux/if_link.h ../../../include/uapi/linux/if_link.h >/dev/null) || \
 	echo "Warning: Kernel ABI header at 'tools/include/uapi/linux/if_link.h' differs from latest version at 'include/uapi/linux/if_link.h'" >&2 )) || true
+	@(test -f ../../include/uapi/linux/if_xdp.h -a -f ../../../include/uapi/linux/if_xdp.h && ( \
+	(diff -B ../../include/uapi/linux/if_xdp.h ../../../include/uapi/linux/if_xdp.h >/dev/null) || \
+	echo "Warning: Kernel ABI header at 'tools/include/uapi/linux/if_xdp.h' differs from latest version at 'include/uapi/linux/if_xdp.h'" >&2 )) || true
 	$(Q)$(MAKE) $(build)=libbpf
 
 $(OUTPUT)libbpf.so: $(BPF_IN)
@@ -174,7 +177,7 @@ $(OUTPUT)libbpf.a: $(BPF_IN)
 	$(QUIET_LINK)$(RM) $@; $(AR) rcs $@ $^
 
 $(OUTPUT)test_libbpf: test_libbpf.cpp $(OUTPUT)libbpf.a
-	$(QUIET_LINK)$(CXX) $^ -lelf -o $@
+	$(QUIET_LINK)$(CXX) $(INCLUDES) $^ -lelf -o $@
 
 check: check_abi
 
diff --git a/tools/lib/bpf/README.rst b/tools/lib/bpf/README.rst
index 607aae4..45e3788 100644
--- a/tools/lib/bpf/README.rst
+++ b/tools/lib/bpf/README.rst
@@ -9,7 +9,7 @@ described here. It's recommended to follow these conventions whenever a
 new function or type is added to keep libbpf API clean and consistent.
 
 All types and functions provided by libbpf API should have one of the
-following prefixes: ``bpf_``, ``btf_``, ``libbpf_``.
+following prefixes: ``bpf_``, ``btf_``, ``libbpf_``, ``xsk_``.
 
 System call wrappers
 --------------------
@@ -62,6 +62,15 @@ Auxiliary functions and types that don't fit well in any of categories
 described above should have ``libbpf_`` prefix, e.g.
 ``libbpf_get_error`` or ``libbpf_prog_type_by_name``.
 
+AF_XDP functions
+-------------------
+
+AF_XDP functions should have an ``xsk_`` prefix, e.g.
+``xsk_umem__get_data`` or ``xsk_umem__create``. The interface consists
+of both low-level ring access functions and high-level configuration
+functions. These can be mixed and matched. Note that these functions
+are not reentrant for performance reasons.
+
 libbpf ABI
 ==========
 
diff --git a/tools/lib/bpf/libbpf.map b/tools/lib/bpf/libbpf.map
index 89c1149..1cc1bb8 100644
--- a/tools/lib/bpf/libbpf.map
+++ b/tools/lib/bpf/libbpf.map
@@ -143,4 +143,11 @@ LIBBPF_0.0.2 {
 		btf_ext__new;
 		btf_ext__reloc_func_info;
 		btf_ext__reloc_line_info;
+		xsk_umem__create;
+		xsk_socket__create;
+		xsk_umem__delete;
+		xsk_socket__delete;
+		xsk_umem__get_data;
+		xsk_umem__fd;
+		xsk_socket__fd;
 } LIBBPF_0.0.1;
diff --git a/tools/lib/bpf/xsk.c b/tools/lib/bpf/xsk.c
new file mode 100644
index 0000000..a982a76
--- /dev/null
+++ b/tools/lib/bpf/xsk.c
@@ -0,0 +1,742 @@
+// SPDX-License-Identifier: (LGPL-2.1 OR BSD-2-Clause)
+
+/*
+ * AF_XDP user-space access library.
+ *
+ * Copyright(c) 2018 - 2019 Intel Corporation.
+ *
+ * Author(s): Magnus Karlsson <magnus.karlsson@intel.com>
+ */
+
+#include <errno.h>
+#include <stdlib.h>
+#include <string.h>
+#include <unistd.h>
+#include <arpa/inet.h>
+#include <asm/barrier.h>
+#include <linux/compiler.h>
+#include <linux/filter.h>
+#include <linux/if_ether.h>
+#include <linux/if_link.h>
+#include <linux/if_packet.h>
+#include <linux/if_xdp.h>
+#include <linux/rtnetlink.h>
+#include <net/if.h>
+#include <sys/mman.h>
+#include <sys/socket.h>
+#include <sys/types.h>
+
+#include "bpf.h"
+#include "libbpf.h"
+#include "libbpf_util.h"
+#include "nlattr.h"
+#include "xsk.h"
+
+#ifndef SOL_XDP
+ #define SOL_XDP 283
+#endif
+
+#ifndef AF_XDP
+ #define AF_XDP 44
+#endif
+
+#ifndef PF_XDP
+ #define PF_XDP AF_XDP
+#endif
+
+struct xsk_umem {
+	struct xsk_ring_prod *fill;
+	struct xsk_ring_cons *comp;
+	char *umem_area;
+	struct xsk_umem_config config;
+	int fd;
+	int refcount;
+};
+
+struct xsk_socket {
+	struct xsk_ring_cons *rx;
+	struct xsk_ring_prod *tx;
+	__u64 outstanding_tx;
+	struct xsk_umem *umem;
+	struct xsk_socket_config config;
+	int fd;
+	int xsks_map;
+	int ifindex;
+	int prog_fd;
+	int qidconf_map_fd;
+	int xsks_map_fd;
+	__u32 queue_id;
+};
+
+struct xsk_nl_info {
+	bool xdp_prog_attached;
+	int ifindex;
+	int fd;
+};
+
+#define MAX_QUEUES 128
+
+/* For 32-bit systems, we need to use mmap2 as the offsets are 64-bit.
+ * Unfortunately, it is not part of glibc.
+ */
+static inline void *xsk_mmap(void *addr, size_t length, int prot, int flags,
+			     int fd, __u64 offset)
+{
+#ifdef __NR_mmap2
+	unsigned int page_shift = __builtin_ffs(getpagesize()) - 1;
+	long ret = syscall(__NR_mmap2, addr, length, prot, flags, fd,
+			   (off_t)(offset >> page_shift));
+
+	return (void *)ret;
+#else
+	return mmap(addr, length, prot, flags, fd, offset);
+#endif
+}
+
+void *xsk_umem__get_data(struct xsk_umem *umem, __u64 addr)
+{
+	return &((char *)(umem->umem_area))[addr];
+}
+
+int xsk_umem__fd(const struct xsk_umem *umem)
+{
+	return umem ? umem->fd : -EINVAL;
+}
+
+int xsk_socket__fd(const struct xsk_socket *xsk)
+{
+	return xsk ? xsk->fd : -EINVAL;
+}
+
+static bool xsk_page_aligned(void *buffer)
+{
+	unsigned long addr = (unsigned long)buffer;
+
+	return !(addr & (getpagesize() - 1));
+}
+
+static void xsk_set_umem_config(struct xsk_umem_config *cfg,
+				const struct xsk_umem_config *usr_cfg)
+{
+	if (!usr_cfg) {
+		cfg->fill_size = XSK_RING_PROD__DEFAULT_NUM_DESCS;
+		cfg->comp_size = XSK_RING_CONS__DEFAULT_NUM_DESCS;
+		cfg->frame_size = XSK_UMEM__DEFAULT_FRAME_SIZE;
+		cfg->frame_headroom = XSK_UMEM__DEFAULT_FRAME_HEADROOM;
+		return;
+	}
+
+	cfg->fill_size = usr_cfg->fill_size;
+	cfg->comp_size = usr_cfg->comp_size;
+	cfg->frame_size = usr_cfg->frame_size;
+	cfg->frame_headroom = usr_cfg->frame_headroom;
+}
+
+static void xsk_set_xdp_socket_config(struct xsk_socket_config *cfg,
+				      const struct xsk_socket_config *usr_cfg)
+{
+	if (!usr_cfg) {
+		cfg->rx_size = XSK_RING_CONS__DEFAULT_NUM_DESCS;
+		cfg->tx_size = XSK_RING_PROD__DEFAULT_NUM_DESCS;
+		cfg->libbpf_flags = 0;
+		cfg->xdp_flags = 0;
+		cfg->bind_flags = 0;
+		return;
+	}
+
+	cfg->rx_size = usr_cfg->rx_size;
+	cfg->tx_size = usr_cfg->tx_size;
+	cfg->libbpf_flags = usr_cfg->libbpf_flags;
+	cfg->xdp_flags = usr_cfg->xdp_flags;
+	cfg->bind_flags = usr_cfg->bind_flags;
+}
+
+int xsk_umem__create(struct xsk_umem **umem_ptr, void *umem_area, __u64 size,
+		     struct xsk_ring_prod *fill, struct xsk_ring_cons *comp,
+		     const struct xsk_umem_config *usr_config)
+{
+	struct xdp_mmap_offsets off;
+	struct xdp_umem_reg mr;
+	struct xsk_umem *umem;
+	socklen_t optlen;
+	void *map;
+	int err;
+
+	if (!umem_area || !umem_ptr || !fill || !comp)
+		return -EFAULT;
+	if (!size && !xsk_page_aligned(umem_area))
+		return -EINVAL;
+
+	umem = calloc(1, sizeof(*umem));
+	if (!umem)
+		return -ENOMEM;
+
+	umem->fd = socket(AF_XDP, SOCK_RAW, 0);
+	if (umem->fd < 0) {
+		err = -errno;
+		goto out_umem_alloc;
+	}
+
+	umem->umem_area = umem_area;
+	xsk_set_umem_config(&umem->config, usr_config);
+
+	mr.addr = (uintptr_t)umem_area;
+	mr.len = size;
+	mr.chunk_size = umem->config.frame_size;
+	mr.headroom = umem->config.frame_headroom;
+
+	err = setsockopt(umem->fd, SOL_XDP, XDP_UMEM_REG, &mr, sizeof(mr));
+	if (err) {
+		err = -errno;
+		goto out_socket;
+	}
+	err = setsockopt(umem->fd, SOL_XDP, XDP_UMEM_FILL_RING,
+			 &umem->config.fill_size,
+			 sizeof(umem->config.fill_size));
+	if (err) {
+		err = -errno;
+		goto out_socket;
+	}
+	err = setsockopt(umem->fd, SOL_XDP, XDP_UMEM_COMPLETION_RING,
+			 &umem->config.comp_size,
+			 sizeof(umem->config.comp_size));
+	if (err) {
+		err = -errno;
+		goto out_socket;
+	}
+
+	optlen = sizeof(off);
+	err = getsockopt(umem->fd, SOL_XDP, XDP_MMAP_OFFSETS, &off, &optlen);
+	if (err) {
+		err = -errno;
+		goto out_socket;
+	}
+
+	map = xsk_mmap(NULL, off.fr.desc +
+		       umem->config.fill_size * sizeof(__u64),
+		       PROT_READ | PROT_WRITE, MAP_SHARED | MAP_POPULATE,
+		       umem->fd, XDP_UMEM_PGOFF_FILL_RING);
+	if (map == MAP_FAILED) {
+		err = -errno;
+		goto out_socket;
+	}
+
+	umem->fill = fill;
+	fill->mask = umem->config.fill_size - 1;
+	fill->size = umem->config.fill_size;
+	fill->producer = map + off.fr.producer;
+	fill->consumer = map + off.fr.consumer;
+	fill->ring = map + off.fr.desc;
+	fill->cached_cons = umem->config.fill_size;
+
+	map = xsk_mmap(NULL,
+		       off.cr.desc + umem->config.comp_size * sizeof(__u64),
+		       PROT_READ | PROT_WRITE, MAP_SHARED | MAP_POPULATE,
+		       umem->fd, XDP_UMEM_PGOFF_COMPLETION_RING);
+	if (map == MAP_FAILED) {
+		err = -errno;
+		goto out_mmap;
+	}
+
+	umem->comp = comp;
+	comp->mask = umem->config.comp_size - 1;
+	comp->size = umem->config.comp_size;
+	comp->producer = map + off.cr.producer;
+	comp->consumer = map + off.cr.consumer;
+	comp->ring = map + off.cr.desc;
+
+	*umem_ptr = umem;
+	return 0;
+
+out_mmap:
+	munmap(umem->fill,
+	       off.fr.desc + umem->config.fill_size * sizeof(__u64));
+out_socket:
+	close(umem->fd);
+out_umem_alloc:
+	free(umem);
+	return err;
+}
+
+static int xsk_parse_nl(void *cookie, void *msg, struct nlattr **tb)
+{
+	struct nlattr *tb_parsed[IFLA_XDP_MAX + 1];
+	struct xsk_nl_info *nl_info = cookie;
+	struct ifinfomsg *ifinfo = msg;
+	unsigned char mode;
+	int err;
+
+	if (nl_info->ifindex && nl_info->ifindex != ifinfo->ifi_index)
+		return 0;
+
+	if (!tb[IFLA_XDP])
+		return 0;
+
+	err = libbpf_nla_parse_nested(tb_parsed, IFLA_XDP_MAX, tb[IFLA_XDP],
+				      NULL);
+	if (err)
+		return err;
+
+	if (!tb_parsed[IFLA_XDP_ATTACHED] || !tb_parsed[IFLA_XDP_FD])
+		return 0;
+
+	mode = libbpf_nla_getattr_u8(tb_parsed[IFLA_XDP_ATTACHED]);
+	if (mode == XDP_ATTACHED_NONE)
+		return 0;
+
+	nl_info->xdp_prog_attached = true;
+	nl_info->fd = libbpf_nla_getattr_u32(tb_parsed[IFLA_XDP_FD]);
+	return 0;
+}
+
+static bool xsk_xdp_prog_attached(struct xsk_socket *xsk)
+{
+	struct xsk_nl_info nl_info;
+	unsigned int nl_pid;
+	char err_buf[256];
+	int sock, err;
+
+	sock = libbpf_netlink_open(&nl_pid);
+	if (sock < 0)
+		return false;
+
+	nl_info.xdp_prog_attached = false;
+	nl_info.ifindex = xsk->ifindex;
+	nl_info.fd = -1;
+
+	err = libbpf_nl_get_link(sock, nl_pid, xsk_parse_nl, &nl_info);
+	if (err) {
+		libbpf_strerror(err, err_buf, sizeof(err_buf));
+		pr_warning("Error:\n%s\n", err_buf);
+		close(sock);
+		return false;
+	}
+
+	close(sock);
+	xsk->prog_fd = nl_info.fd;
+	return nl_info.xdp_prog_attached;
+}
+
+static int xsk_load_xdp_prog(struct xsk_socket *xsk)
+{
+	char bpf_log_buf[BPF_LOG_BUF_SIZE];
+	int err, prog_fd;
+
+	/* This is the C-program:
+	 * SEC("xdp_sock") int xdp_sock_prog(struct xdp_md *ctx)
+	 * {
+	 *     int *qidconf, index = ctx->rx_queue_index;
+	 *
+	 *     // A set entry here means that the correspnding queue_id
+	 *     // has an active AF_XDP socket bound to it.
+	 *     qidconf = bpf_map_lookup_elem(&qidconf_map, &index);
+	 *     if (!qidconf)
+	 *         return XDP_ABORTED;
+	 *
+	 *     if (*qidconf)
+	 *         return bpf_redirect_map(&xsks_map, index, 0);
+	 *
+	 *     return XDP_PASS;
+	 * }
+	 */
+	struct bpf_insn prog[] = {
+		/* r1 = *(u32 *)(r1 + 16) */
+		BPF_LDX_MEM(BPF_W, BPF_REG_1, BPF_REG_1, 16),
+		/* *(u32 *)(r10 - 4) = r1 */
+		BPF_STX_MEM(BPF_W, BPF_REG_10, BPF_REG_1, -4),
+		BPF_MOV64_REG(BPF_REG_2, BPF_REG_10),
+		BPF_ALU64_IMM(BPF_ADD, BPF_REG_2, -4),
+		BPF_LD_MAP_FD(BPF_REG_1, xsk->qidconf_map_fd),
+		BPF_EMIT_CALL(BPF_FUNC_map_lookup_elem),
+		BPF_MOV64_REG(BPF_REG_1, BPF_REG_0),
+		BPF_MOV32_IMM(BPF_REG_0, 0),
+		/* if r1 == 0 goto +8 */
+		BPF_JMP_IMM(BPF_JEQ, BPF_REG_1, 0, 8),
+		BPF_MOV32_IMM(BPF_REG_0, 2),
+		/* r1 = *(u32 *)(r1 + 0) */
+		BPF_LDX_MEM(BPF_W, BPF_REG_1, BPF_REG_1, 0),
+		/* if r1 == 0 goto +5 */
+		BPF_JMP_IMM(BPF_JEQ, BPF_REG_1, 0, 5),
+		/* r2 = *(u32 *)(r10 - 4) */
+		BPF_LD_MAP_FD(BPF_REG_1, xsk->xsks_map_fd),
+		BPF_LDX_MEM(BPF_W, BPF_REG_2, BPF_REG_10, -4),
+		BPF_MOV32_IMM(BPF_REG_3, 0),
+		BPF_EMIT_CALL(BPF_FUNC_redirect_map),
+		/* The jumps are to this instruction */
+		BPF_EXIT_INSN(),
+	};
+	size_t insns_cnt = sizeof(prog) / sizeof(struct bpf_insn);
+
+	prog_fd = bpf_load_program(BPF_PROG_TYPE_XDP, prog, insns_cnt,
+				   "LGPL-2.1 or BSD-2-Clause", 0, bpf_log_buf,
+				   BPF_LOG_BUF_SIZE);
+	if (prog_fd < 0) {
+		pr_warning("BPF log buffer:\n%s", bpf_log_buf);
+		return prog_fd;
+	}
+
+	err = bpf_set_link_xdp_fd(xsk->ifindex, prog_fd, xsk->config.xdp_flags);
+	if (err) {
+		close(prog_fd);
+		return err;
+	}
+
+	xsk->prog_fd = prog_fd;
+	return 0;
+}
+
+static int xsk_create_bpf_maps(struct xsk_socket *xsk)
+{
+	int fd;
+
+	fd = bpf_create_map_name(BPF_MAP_TYPE_ARRAY, "qidconf_map",
+				 sizeof(int), sizeof(int), MAX_QUEUES, 0);
+	if (fd < 0)
+		return fd;
+	xsk->qidconf_map_fd = fd;
+
+	fd = bpf_create_map_name(BPF_MAP_TYPE_XSKMAP, "xsks_map",
+				 sizeof(int), sizeof(int), MAX_QUEUES, 0);
+	if (fd < 0) {
+		close(xsk->qidconf_map_fd);
+		return fd;
+	}
+	xsk->xsks_map_fd = fd;
+
+	return 0;
+}
+
+static void xsk_delete_bpf_maps(struct xsk_socket *xsk)
+{
+	close(xsk->qidconf_map_fd);
+	close(xsk->xsks_map_fd);
+}
+
+static int xsk_update_bpf_maps(struct xsk_socket *xsk, int qidconf_value,
+			       int xsks_value)
+{
+	bool qidconf_map_updated = false, xsks_map_updated = false;
+	struct bpf_prog_info prog_info = {};
+	__u32 prog_len = sizeof(prog_info);
+	struct bpf_map_info map_info;
+	__u32 map_len = sizeof(map_info);
+	__u32 *map_ids;
+	int reset_value = 0;
+	__u32 num_maps;
+	unsigned int i;
+	int err;
+
+	err = bpf_obj_get_info_by_fd(xsk->prog_fd, &prog_info, &prog_len);
+	if (err)
+		return err;
+
+	num_maps = prog_info.nr_map_ids;
+
+	map_ids = calloc(prog_info.nr_map_ids, sizeof(*map_ids));
+	if (!map_ids)
+		return -ENOMEM;
+
+	memset(&prog_info, 0, prog_len);
+	prog_info.nr_map_ids = num_maps;
+	prog_info.map_ids = (__u64)(unsigned long)map_ids;
+
+	err = bpf_obj_get_info_by_fd(xsk->prog_fd, &prog_info, &prog_len);
+	if (err)
+		goto out_map_ids;
+
+	for (i = 0; i < prog_info.nr_map_ids; i++) {
+		int fd;
+
+		fd = bpf_map_get_fd_by_id(map_ids[i]);
+		if (fd < 0) {
+			err = -errno;
+			goto out_maps;
+		}
+
+		err = bpf_obj_get_info_by_fd(fd, &map_info, &map_len);
+		if (err)
+			goto out_maps;
+
+		if (!strcmp(map_info.name, "qidconf_map")) {
+			err = bpf_map_update_elem(fd, &xsk->queue_id,
+						  &qidconf_value, 0);
+			if (err)
+				goto out_maps;
+			qidconf_map_updated = true;
+			xsk->qidconf_map_fd = fd;
+		} else if (!strcmp(map_info.name, "xsks_map")) {
+			err = bpf_map_update_elem(fd, &xsk->queue_id,
+						  &xsks_value, 0);
+			if (err)
+				goto out_maps;
+			xsks_map_updated = true;
+			xsk->xsks_map_fd = fd;
+		}
+
+		if (qidconf_map_updated && xsks_map_updated)
+			break;
+	}
+
+	if (!(qidconf_map_updated && xsks_map_updated)) {
+		err = -ENOENT;
+		goto out_maps;
+	}
+
+	err = 0;
+	goto out_success;
+
+out_maps:
+	if (qidconf_map_updated)
+		(void)bpf_map_update_elem(xsk->qidconf_map_fd, &xsk->queue_id,
+					  &reset_value, 0);
+	if (xsks_map_updated)
+		(void)bpf_map_update_elem(xsk->xsks_map_fd, &xsk->queue_id,
+					  &reset_value, 0);
+out_success:
+	if (qidconf_map_updated)
+		close(xsk->qidconf_map_fd);
+	if (xsks_map_updated)
+		close(xsk->xsks_map_fd);
+out_map_ids:
+	free(map_ids);
+	return err;
+}
+
+static int xsk_setup_xdp_prog(struct xsk_socket *xsk)
+{
+	bool prog_attached = false;
+	int err;
+
+	if (!xsk_xdp_prog_attached(xsk)) {
+		prog_attached = true;
+		err = xsk_create_bpf_maps(xsk);
+		if (err)
+			return err;
+
+		err = xsk_load_xdp_prog(xsk);
+		if (err)
+			goto out_maps;
+	}
+
+	err = xsk_update_bpf_maps(xsk, true, xsk->fd);
+	if (err)
+		goto out_load;
+
+	return 0;
+
+out_load:
+	if (prog_attached)
+		close(xsk->prog_fd);
+out_maps:
+	if (prog_attached)
+		xsk_delete_bpf_maps(xsk);
+	return err;
+}
+
+int xsk_socket__create(struct xsk_socket **xsk_ptr, const char *ifname,
+		       __u32 queue_id, struct xsk_umem *umem,
+		       struct xsk_ring_cons *rx, struct xsk_ring_prod *tx,
+		       const struct xsk_socket_config *usr_config)
+{
+	struct sockaddr_xdp sxdp = {};
+	struct xdp_mmap_offsets off;
+	struct xsk_socket *xsk;
+	socklen_t optlen;
+	void *map;
+	int err;
+
+	if (!umem || !xsk_ptr || !rx || !tx)
+		return -EFAULT;
+
+	if (umem->refcount) {
+		pr_warning("Error: shared umems not supported by libbpf.\n");
+		return -EBUSY;
+	}
+
+	xsk = calloc(1, sizeof(*xsk));
+	if (!xsk)
+		return -ENOMEM;
+
+	if (umem->refcount++ > 0) {
+		xsk->fd = socket(AF_XDP, SOCK_RAW, 0);
+		if (xsk->fd < 0) {
+			err = -errno;
+			goto out_xsk_alloc;
+		}
+	} else {
+		xsk->fd = umem->fd;
+	}
+
+	xsk->outstanding_tx = 0;
+	xsk->queue_id = queue_id;
+	xsk->umem = umem;
+	xsk->ifindex = if_nametoindex(ifname);
+	if (!xsk->ifindex) {
+		err = -errno;
+		goto out_socket;
+	}
+
+	xsk_set_xdp_socket_config(&xsk->config, usr_config);
+
+	if (rx) {
+		err = setsockopt(xsk->fd, SOL_XDP, XDP_RX_RING,
+				 &xsk->config.rx_size,
+				 sizeof(xsk->config.rx_size));
+		if (err) {
+			err = -errno;
+			goto out_socket;
+		}
+	}
+	if (tx) {
+		err = setsockopt(xsk->fd, SOL_XDP, XDP_TX_RING,
+				 &xsk->config.tx_size,
+				 sizeof(xsk->config.tx_size));
+		if (err) {
+			err = -errno;
+			goto out_socket;
+		}
+	}
+
+	optlen = sizeof(off);
+	err = getsockopt(xsk->fd, SOL_XDP, XDP_MMAP_OFFSETS, &off, &optlen);
+	if (err) {
+		err = -errno;
+		goto out_socket;
+	}
+
+	if (rx) {
+		map = xsk_mmap(NULL, off.rx.desc +
+			       xsk->config.rx_size * sizeof(struct xdp_desc),
+			       PROT_READ | PROT_WRITE,
+			       MAP_SHARED | MAP_POPULATE,
+			       xsk->fd, XDP_PGOFF_RX_RING);
+		if (map == MAP_FAILED) {
+			err = -errno;
+			goto out_socket;
+		}
+
+		rx->mask = xsk->config.rx_size - 1;
+		rx->size = xsk->config.rx_size;
+		rx->producer = map + off.rx.producer;
+		rx->consumer = map + off.rx.consumer;
+		rx->ring = map + off.rx.desc;
+	}
+	xsk->rx = rx;
+
+	if (tx) {
+		map = xsk_mmap(NULL, off.tx.desc +
+			       xsk->config.tx_size * sizeof(struct xdp_desc),
+			       PROT_READ | PROT_WRITE,
+			       MAP_SHARED | MAP_POPULATE,
+			       xsk->fd, XDP_PGOFF_TX_RING);
+		if (map == MAP_FAILED) {
+			err = -errno;
+			goto out_mmap_rx;
+		}
+
+		tx->mask = xsk->config.tx_size - 1;
+		tx->size = xsk->config.tx_size;
+		tx->producer = map + off.tx.producer;
+		tx->consumer = map + off.tx.consumer;
+		tx->ring = map + off.tx.desc;
+		tx->cached_cons = xsk->config.tx_size;
+	}
+	xsk->tx = tx;
+
+	sxdp.sxdp_family = PF_XDP;
+	sxdp.sxdp_ifindex = xsk->ifindex;
+	sxdp.sxdp_queue_id = xsk->queue_id;
+	sxdp.sxdp_flags = xsk->config.bind_flags;
+
+	err = bind(xsk->fd, (struct sockaddr *)&sxdp, sizeof(sxdp));
+	if (err) {
+		err = -errno;
+		goto out_mmap_tx;
+	}
+
+	if (!(xsk->config.libbpf_flags & XSK_LIBBPF_FLAGS__INHIBIT_PROG_LOAD)) {
+		err = xsk_setup_xdp_prog(xsk);
+		if (err)
+			goto out_mmap_tx;
+	}
+
+	*xsk_ptr = xsk;
+	return 0;
+
+out_mmap_tx:
+	if (tx)
+		munmap(xsk->tx,
+		       off.tx.desc +
+		       xsk->config.tx_size * sizeof(struct xdp_desc));
+out_mmap_rx:
+	if (rx)
+		munmap(xsk->rx,
+		       off.rx.desc +
+		       xsk->config.rx_size * sizeof(struct xdp_desc));
+out_socket:
+	if (--umem->refcount)
+		close(xsk->fd);
+out_xsk_alloc:
+	free(xsk);
+	return err;
+}
+
+int xsk_umem__delete(struct xsk_umem *umem)
+{
+	struct xdp_mmap_offsets off;
+	socklen_t optlen;
+	int err;
+
+	if (!umem)
+		return 0;
+
+	if (umem->refcount)
+		return -EBUSY;
+
+	optlen = sizeof(off);
+	err = getsockopt(umem->fd, SOL_XDP, XDP_MMAP_OFFSETS, &off, &optlen);
+	if (!err) {
+		munmap(umem->fill->ring,
+		       off.fr.desc + umem->config.fill_size * sizeof(__u64));
+		munmap(umem->comp->ring,
+		       off.cr.desc + umem->config.comp_size * sizeof(__u64));
+	}
+
+	close(umem->fd);
+	free(umem);
+
+	return 0;
+}
+
+void xsk_socket__delete(struct xsk_socket *xsk)
+{
+	struct xdp_mmap_offsets off;
+	socklen_t optlen;
+	int err;
+
+	if (!xsk)
+		return;
+
+	(void)xsk_update_bpf_maps(xsk, 0, 0);
+
+	optlen = sizeof(off);
+	err = getsockopt(xsk->fd, SOL_XDP, XDP_MMAP_OFFSETS, &off, &optlen);
+	if (!err) {
+		if (xsk->rx)
+			munmap(xsk->rx->ring,
+			       off.rx.desc +
+			       xsk->config.rx_size * sizeof(struct xdp_desc));
+		if (xsk->tx)
+			munmap(xsk->tx->ring,
+			       off.tx.desc +
+			       xsk->config.tx_size * sizeof(struct xdp_desc));
+	}
+
+	xsk->umem->refcount--;
+	/* Do not close an fd that also has an associated umem connected
+	 * to it.
+	 */
+	if (xsk->fd != xsk->umem->fd)
+		close(xsk->fd);
+	free(xsk);
+}
diff --git a/tools/lib/bpf/xsk.h b/tools/lib/bpf/xsk.h
new file mode 100644
index 0000000..a1ab8c9
--- /dev/null
+++ b/tools/lib/bpf/xsk.h
@@ -0,0 +1,205 @@
+/* SPDX-License-Identifier: (LGPL-2.1 OR BSD-2-Clause) */
+
+/*
+ * AF_XDP user-space access library.
+ *
+ * Copyright(c) 2018 - 2019 Intel Corporation.
+ *
+ * Author(s): Magnus Karlsson <magnus.karlsson@intel.com>
+ */
+
+#ifndef __LIBBPF_XSK_H
+#define __LIBBPF_XSK_H
+
+#include <stdio.h>
+#include <stdint.h>
+#include <linux/if_xdp.h>
+
+#include "libbpf.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Do not access these members directly. Use the functions below. */
+#define DEFINE_XSK_RING(name) \
+struct name { \
+	__u32 cached_prod; \
+	__u32 cached_cons; \
+	__u32 mask; \
+	__u32 size; \
+	__u32 *producer; \
+	__u32 *consumer; \
+	void *ring; \
+}
+
+DEFINE_XSK_RING(xsk_ring_prod);
+DEFINE_XSK_RING(xsk_ring_cons);
+
+struct xsk_umem;
+struct xsk_socket;
+
+static inline __u64 *xsk_ring_prod__fill_addr(struct xsk_ring_prod *fill,
+					      __u32 idx)
+{
+	__u64 *addrs = (__u64 *)fill->ring;
+
+	return &addrs[idx & fill->mask];
+}
+
+static inline const __u64 *
+xsk_ring_cons__comp_addr(const struct xsk_ring_cons *comp, __u32 idx)
+{
+	const __u64 *addrs = (const __u64 *)comp->ring;
+
+	return &addrs[idx & comp->mask];
+}
+
+static inline struct xdp_desc *xsk_ring_prod__tx_desc(struct xsk_ring_prod *tx,
+						      __u32 idx)
+{
+	struct xdp_desc *descs = (struct xdp_desc *)tx->ring;
+
+	return &descs[idx & tx->mask];
+}
+
+static inline const struct xdp_desc *
+xsk_ring_cons__rx_desc(const struct xsk_ring_cons *rx, __u32 idx)
+{
+	const struct xdp_desc *descs = (const struct xdp_desc *)rx->ring;
+
+	return &descs[idx & rx->mask];
+}
+
+static inline __u32 xsk_prod_nb_free(struct xsk_ring_prod *r, __u32 nb)
+{
+	__u32 free_entries = r->cached_cons - r->cached_prod;
+
+	if (free_entries >= nb)
+		return free_entries;
+
+	/* Refresh the local tail pointer.
+	 * cached_cons is r->size bigger than the real consumer pointer so
+	 * that this addition can be avoided in the more frequently
+	 * executed code that computs free_entries in the beginning of
+	 * this function. Without this optimization it whould have been
+	 * free_entries = r->cached_prod - r->cached_cons + r->size.
+	 */
+	r->cached_cons = *r->consumer + r->size;
+
+	return r->cached_cons - r->cached_prod;
+}
+
+static inline __u32 xsk_cons_nb_avail(struct xsk_ring_cons *r, __u32 nb)
+{
+	__u32 entries = r->cached_prod - r->cached_cons;
+
+	if (entries == 0) {
+		r->cached_prod = *r->producer;
+		entries = r->cached_prod - r->cached_cons;
+	}
+
+	return (entries > nb) ? nb : entries;
+}
+
+static inline size_t xsk_ring_prod__reserve(struct xsk_ring_prod *prod,
+					    size_t nb, __u32 *idx)
+{
+	if (unlikely(xsk_prod_nb_free(prod, nb) < nb))
+		return 0;
+
+	*idx = prod->cached_prod;
+	prod->cached_prod += nb;
+
+	return nb;
+}
+
+static inline void xsk_ring_prod__submit(struct xsk_ring_prod *prod, size_t nb)
+{
+	/* Make sure everything has been written to the ring before signalling
+	 * this to the kernel.
+	 */
+	smp_wmb();
+
+	*prod->producer += nb;
+}
+
+static inline size_t xsk_ring_cons__peek(struct xsk_ring_cons *cons,
+					 size_t nb, __u32 *idx)
+{
+	size_t entries = xsk_cons_nb_avail(cons, nb);
+
+	if (likely(entries > 0)) {
+		/* Make sure we do not speculatively read the data before
+		 * we have received the packet buffers from the ring.
+		 */
+		smp_rmb();
+
+		*idx = cons->cached_cons;
+		cons->cached_cons += entries;
+	}
+
+	return entries;
+}
+
+static inline void xsk_ring_cons__release(struct xsk_ring_cons *cons, size_t nb)
+{
+	*cons->consumer += nb;
+}
+
+static inline void *xsk_umem__get_data_raw(void *umem_area, __u64 addr)
+{
+	return &((char *)umem_area)[addr];
+}
+
+LIBBPF_API void *xsk_umem__get_data(struct xsk_umem *umem, __u64 addr);
+
+LIBBPF_API int xsk_umem__fd(const struct xsk_umem *umem);
+LIBBPF_API int xsk_socket__fd(const struct xsk_socket *xsk);
+
+#define XSK_RING_CONS__DEFAULT_NUM_DESCS      2048
+#define XSK_RING_PROD__DEFAULT_NUM_DESCS      2048
+#define XSK_UMEM__DEFAULT_FRAME_SHIFT    11 /* 2048 bytes */
+#define XSK_UMEM__DEFAULT_FRAME_SIZE     (1 << XSK_UMEM__DEFAULT_FRAME_SHIFT)
+#define XSK_UMEM__DEFAULT_FRAME_HEADROOM 0
+
+struct xsk_umem_config {
+	__u32 fill_size;
+	__u32 comp_size;
+	__u32 frame_size;
+	__u32 frame_headroom;
+};
+
+/* Flags for the libbpf_flags field. */
+#define XSK_LIBBPF_FLAGS__INHIBIT_PROG_LOAD (1 << 0)
+
+struct xsk_socket_config {
+	__u32 rx_size;
+	__u32 tx_size;
+	__u32 libbpf_flags;
+	__u32 xdp_flags;
+	__u16 bind_flags;
+};
+
+/* Set config to NULL to get the default configuration. */
+LIBBPF_API int xsk_umem__create(struct xsk_umem **umem,
+				void *umem_area, __u64 size,
+				struct xsk_ring_prod *fill,
+				struct xsk_ring_cons *comp,
+				const struct xsk_umem_config *config);
+LIBBPF_API int xsk_socket__create(struct xsk_socket **xsk,
+				  const char *ifname, __u32 queue_id,
+				  struct xsk_umem *umem,
+				  struct xsk_ring_cons *rx,
+				  struct xsk_ring_prod *tx,
+				  const struct xsk_socket_config *config);
+
+/* Returns 0 for success and -EBUSY if the umem is still in use. */
+LIBBPF_API int xsk_umem__delete(struct xsk_umem *umem);
+LIBBPF_API void xsk_socket__delete(struct xsk_socket *xsk);
+
+#ifdef __cplusplus
+} /* extern "C" */
+#endif
+
+#endif /* __LIBBPF_XSK_H */
-- 
2.7.4


^ permalink raw reply related	[flat|nested] 17+ messages in thread

* [PATCH bpf-next v4 2/2] samples/bpf: convert xdpsock to use libbpf for AF_XDP access
  2019-02-08 13:05 [PATCH bpf-next v4 0/2] libbpf: adding AF_XDP support Magnus Karlsson
  2019-02-08 13:05 ` [PATCH bpf-next v4 1/2] libbpf: add support for using AF_XDP sockets Magnus Karlsson
@ 2019-02-08 13:05 ` Magnus Karlsson
  2019-02-11  6:33 ` [PATCH bpf-next v4 0/2] libbpf: adding AF_XDP support Jean-Mickael Guerin
  2019-02-11 19:48 ` Jonathan Lemon
  3 siblings, 0 replies; 17+ messages in thread
From: Magnus Karlsson @ 2019-02-08 13:05 UTC (permalink / raw)
  To: magnus.karlsson, bjorn.topel, ast, daniel, netdev,
	jakub.kicinski, bjorn.topel, qi.z.zhang
  Cc: brouer, xiaolong.ye

This commit converts the xdpsock sample application to use the AF_XDP
functions present in libbpf. This cuts down the size of it by nearly
300 lines of code.

The default ring sizes plus the batch size has been increased and the
size of the umem area has decreased. This so that the sample application
will provide higher throughput. Note also that the shared umem code
has been removed from the sample as this is not supported by libbpf
at this point in time.

Tested-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
---
 samples/bpf/Makefile       |   1 -
 samples/bpf/xdpsock.h      |  11 -
 samples/bpf/xdpsock_kern.c |  56 ---
 samples/bpf/xdpsock_user.c | 839 ++++++++++++++-------------------------------
 4 files changed, 259 insertions(+), 648 deletions(-)
 delete mode 100644 samples/bpf/xdpsock.h
 delete mode 100644 samples/bpf/xdpsock_kern.c

diff --git a/samples/bpf/Makefile b/samples/bpf/Makefile
index a0ef7ed..a333e25 100644
--- a/samples/bpf/Makefile
+++ b/samples/bpf/Makefile
@@ -163,7 +163,6 @@ always += xdp2skb_meta_kern.o
 always += syscall_tp_kern.o
 always += cpustat_kern.o
 always += xdp_adjust_tail_kern.o
-always += xdpsock_kern.o
 always += xdp_fwd_kern.o
 always += task_fd_query_kern.o
 always += xdp_sample_pkts_kern.o
diff --git a/samples/bpf/xdpsock.h b/samples/bpf/xdpsock.h
deleted file mode 100644
index 533ab81..0000000
--- a/samples/bpf/xdpsock.h
+++ /dev/null
@@ -1,11 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef XDPSOCK_H_
-#define XDPSOCK_H_
-
-/* Power-of-2 number of sockets */
-#define MAX_SOCKS 4
-
-/* Round-robin receive */
-#define RR_LB 0
-
-#endif /* XDPSOCK_H_ */
diff --git a/samples/bpf/xdpsock_kern.c b/samples/bpf/xdpsock_kern.c
deleted file mode 100644
index b8ccd08..0000000
--- a/samples/bpf/xdpsock_kern.c
+++ /dev/null
@@ -1,56 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#define KBUILD_MODNAME "foo"
-#include <uapi/linux/bpf.h>
-#include "bpf_helpers.h"
-
-#include "xdpsock.h"
-
-struct bpf_map_def SEC("maps") qidconf_map = {
-	.type		= BPF_MAP_TYPE_ARRAY,
-	.key_size	= sizeof(int),
-	.value_size	= sizeof(int),
-	.max_entries	= 1,
-};
-
-struct bpf_map_def SEC("maps") xsks_map = {
-	.type = BPF_MAP_TYPE_XSKMAP,
-	.key_size = sizeof(int),
-	.value_size = sizeof(int),
-	.max_entries = MAX_SOCKS,
-};
-
-struct bpf_map_def SEC("maps") rr_map = {
-	.type = BPF_MAP_TYPE_PERCPU_ARRAY,
-	.key_size = sizeof(int),
-	.value_size = sizeof(unsigned int),
-	.max_entries = 1,
-};
-
-SEC("xdp_sock")
-int xdp_sock_prog(struct xdp_md *ctx)
-{
-	int *qidconf, key = 0, idx;
-	unsigned int *rr;
-
-	qidconf = bpf_map_lookup_elem(&qidconf_map, &key);
-	if (!qidconf)
-		return XDP_ABORTED;
-
-	if (*qidconf != ctx->rx_queue_index)
-		return XDP_PASS;
-
-#if RR_LB /* NB! RR_LB is configured in xdpsock.h */
-	rr = bpf_map_lookup_elem(&rr_map, &key);
-	if (!rr)
-		return XDP_ABORTED;
-
-	*rr = (*rr + 1) & (MAX_SOCKS - 1);
-	idx = *rr;
-#else
-	idx = 0;
-#endif
-
-	return bpf_redirect_map(&xsks_map, idx, 0);
-}
-
-char _license[] SEC("license") = "GPL";
diff --git a/samples/bpf/xdpsock_user.c b/samples/bpf/xdpsock_user.c
index f73055e..159f64b 100644
--- a/samples/bpf/xdpsock_user.c
+++ b/samples/bpf/xdpsock_user.c
@@ -1,37 +1,36 @@
 // SPDX-License-Identifier: GPL-2.0
 /* Copyright(c) 2017 - 2018 Intel Corporation. */
 
-#include <assert.h>
+#include <asm/barrier.h>
 #include <errno.h>
 #include <getopt.h>
 #include <libgen.h>
 #include <linux/bpf.h>
+#include <linux/compiler.h>
 #include <linux/if_link.h>
 #include <linux/if_xdp.h>
 #include <linux/if_ether.h>
+#include <locale.h>
+#include <net/ethernet.h>
 #include <net/if.h>
+#include <poll.h>
+#include <pthread.h>
 #include <signal.h>
 #include <stdbool.h>
 #include <stdio.h>
 #include <stdlib.h>
 #include <string.h>
-#include <net/ethernet.h>
+#include <sys/mman.h>
 #include <sys/resource.h>
 #include <sys/socket.h>
-#include <sys/mman.h>
+#include <sys/types.h>
 #include <time.h>
 #include <unistd.h>
-#include <pthread.h>
-#include <locale.h>
-#include <sys/types.h>
-#include <poll.h>
 
 #include "bpf/libbpf.h"
-#include "bpf_util.h"
+#include "bpf/xsk.h"
 #include <bpf/bpf.h>
 
-#include "xdpsock.h"
-
 #ifndef SOL_XDP
 #define SOL_XDP 283
 #endif
@@ -44,17 +43,11 @@
 #define PF_XDP AF_XDP
 #endif
 
-#define NUM_FRAMES 131072
-#define FRAME_HEADROOM 0
-#define FRAME_SHIFT 11
-#define FRAME_SIZE 2048
-#define NUM_DESCS 1024
-#define BATCH_SIZE 16
-
-#define FQ_NUM_DESCS 1024
-#define CQ_NUM_DESCS 1024
+#define NUM_FRAMES (4 * 1024)
+#define BATCH_SIZE 64
 
 #define DEBUG_HEXDUMP 0
+#define MAX_SOCKS 8
 
 typedef __u64 u64;
 typedef __u32 u32;
@@ -73,54 +66,30 @@ static const char *opt_if = "";
 static int opt_ifindex;
 static int opt_queue;
 static int opt_poll;
-static int opt_shared_packet_buffer;
 static int opt_interval = 1;
 static u32 opt_xdp_bind_flags;
 static __u32 prog_id;
 
-struct xdp_umem_uqueue {
-	u32 cached_prod;
-	u32 cached_cons;
-	u32 mask;
-	u32 size;
-	u32 *producer;
-	u32 *consumer;
-	u64 *ring;
-	void *map;
+struct xsk_umem_info {
+	struct xsk_ring_prod fq;
+	struct xsk_ring_cons cq;
+	struct xsk_umem *umem;
 };
 
-struct xdp_umem {
-	char *frames;
-	struct xdp_umem_uqueue fq;
-	struct xdp_umem_uqueue cq;
-	int fd;
-};
-
-struct xdp_uqueue {
-	u32 cached_prod;
-	u32 cached_cons;
-	u32 mask;
-	u32 size;
-	u32 *producer;
-	u32 *consumer;
-	struct xdp_desc *ring;
-	void *map;
-};
-
-struct xdpsock {
-	struct xdp_uqueue rx;
-	struct xdp_uqueue tx;
-	int sfd;
-	struct xdp_umem *umem;
-	u32 outstanding_tx;
+struct xsk_socket_info {
+	struct xsk_ring_cons rx;
+	struct xsk_ring_prod tx;
+	struct xsk_umem_info *umem;
+	struct xsk_socket *xsk;
 	unsigned long rx_npkts;
 	unsigned long tx_npkts;
 	unsigned long prev_rx_npkts;
 	unsigned long prev_tx_npkts;
+	u32 outstanding_tx;
 };
 
 static int num_socks;
-struct xdpsock *xsks[MAX_SOCKS];
+struct xsk_socket_info *xsks[MAX_SOCKS];
 
 static unsigned long get_nsecs(void)
 {
@@ -130,225 +99,124 @@ static unsigned long get_nsecs(void)
 	return ts.tv_sec * 1000000000UL + ts.tv_nsec;
 }
 
-static void dump_stats(void);
-
-#define lassert(expr)							\
-	do {								\
-		if (!(expr)) {						\
-			fprintf(stderr, "%s:%s:%i: Assertion failed: "	\
-				#expr ": errno: %d/\"%s\"\n",		\
-				__FILE__, __func__, __LINE__,		\
-				errno, strerror(errno));		\
-			dump_stats();					\
-			exit(EXIT_FAILURE);				\
-		}							\
-	} while (0)
-
-#define barrier() __asm__ __volatile__("": : :"memory")
-#ifdef __aarch64__
-#define u_smp_rmb() __asm__ __volatile__("dmb ishld": : :"memory")
-#define u_smp_wmb() __asm__ __volatile__("dmb ishst": : :"memory")
-#else
-#define u_smp_rmb() barrier()
-#define u_smp_wmb() barrier()
-#endif
-#define likely(x) __builtin_expect(!!(x), 1)
-#define unlikely(x) __builtin_expect(!!(x), 0)
-
-static const char pkt_data[] =
-	"\x3c\xfd\xfe\x9e\x7f\x71\xec\xb1\xd7\x98\x3a\xc0\x08\x00\x45\x00"
-	"\x00\x2e\x00\x00\x00\x00\x40\x11\x88\x97\x05\x08\x07\x08\xc8\x14"
-	"\x1e\x04\x10\x92\x10\x92\x00\x1a\x6d\xa3\x34\x33\x1f\x69\x40\x6b"
-	"\x54\x59\xb6\x14\x2d\x11\x44\xbf\xaf\xd9\xbe\xaa";
-
-static inline u32 umem_nb_free(struct xdp_umem_uqueue *q, u32 nb)
-{
-	u32 free_entries = q->cached_cons - q->cached_prod;
-
-	if (free_entries >= nb)
-		return free_entries;
-
-	/* Refresh the local tail pointer */
-	q->cached_cons = *q->consumer + q->size;
-
-	return q->cached_cons - q->cached_prod;
-}
-
-static inline u32 xq_nb_free(struct xdp_uqueue *q, u32 ndescs)
+static void print_benchmark(bool running)
 {
-	u32 free_entries = q->cached_cons - q->cached_prod;
+	const char *bench_str = "INVALID";
 
-	if (free_entries >= ndescs)
-		return free_entries;
+	if (opt_bench == BENCH_RXDROP)
+		bench_str = "rxdrop";
+	else if (opt_bench == BENCH_TXONLY)
+		bench_str = "txonly";
+	else if (opt_bench == BENCH_L2FWD)
+		bench_str = "l2fwd";
 
-	/* Refresh the local tail pointer */
-	q->cached_cons = *q->consumer + q->size;
-	return q->cached_cons - q->cached_prod;
-}
+	printf("%s:%d %s ", opt_if, opt_queue, bench_str);
+	if (opt_xdp_flags & XDP_FLAGS_SKB_MODE)
+		printf("xdp-skb ");
+	else if (opt_xdp_flags & XDP_FLAGS_DRV_MODE)
+		printf("xdp-drv ");
+	else
+		printf("	");
 
-static inline u32 umem_nb_avail(struct xdp_umem_uqueue *q, u32 nb)
-{
-	u32 entries = q->cached_prod - q->cached_cons;
+	if (opt_poll)
+		printf("poll() ");
 
-	if (entries == 0) {
-		q->cached_prod = *q->producer;
-		entries = q->cached_prod - q->cached_cons;
+	if (running) {
+		printf("running...");
+		fflush(stdout);
 	}
-
-	return (entries > nb) ? nb : entries;
 }
 
-static inline u32 xq_nb_avail(struct xdp_uqueue *q, u32 ndescs)
+static void dump_stats(void)
 {
-	u32 entries = q->cached_prod - q->cached_cons;
+	unsigned long now = get_nsecs();
+	long dt = now - prev_time;
+	int i;
 
-	if (entries == 0) {
-		q->cached_prod = *q->producer;
-		entries = q->cached_prod - q->cached_cons;
-	}
+	prev_time = now;
 
-	return (entries > ndescs) ? ndescs : entries;
-}
+	for (i = 0; i < num_socks && xsks[i]; i++) {
+		char *fmt = "%-15s %'-11.0f %'-11lu\n";
+		double rx_pps, tx_pps;
 
-static inline int umem_fill_to_kernel_ex(struct xdp_umem_uqueue *fq,
-					 struct xdp_desc *d,
-					 size_t nb)
-{
-	u32 i;
+		rx_pps = (xsks[i]->rx_npkts - xsks[i]->prev_rx_npkts) *
+			 1000000000. / dt;
+		tx_pps = (xsks[i]->tx_npkts - xsks[i]->prev_tx_npkts) *
+			 1000000000. / dt;
 
-	if (umem_nb_free(fq, nb) < nb)
-		return -ENOSPC;
+		printf("\n sock%d@", i);
+		print_benchmark(false);
+		printf("\n");
 
-	for (i = 0; i < nb; i++) {
-		u32 idx = fq->cached_prod++ & fq->mask;
+		printf("%-15s %-11s %-11s %-11.2f\n", "", "pps", "pkts",
+		       dt / 1000000000.);
+		printf(fmt, "rx", rx_pps, xsks[i]->rx_npkts);
+		printf(fmt, "tx", tx_pps, xsks[i]->tx_npkts);
 
-		fq->ring[idx] = d[i].addr;
+		xsks[i]->prev_rx_npkts = xsks[i]->rx_npkts;
+		xsks[i]->prev_tx_npkts = xsks[i]->tx_npkts;
 	}
-
-	u_smp_wmb();
-
-	*fq->producer = fq->cached_prod;
-
-	return 0;
 }
 
-static inline int umem_fill_to_kernel(struct xdp_umem_uqueue *fq, u64 *d,
-				      size_t nb)
+static void *poller(void *arg)
 {
-	u32 i;
-
-	if (umem_nb_free(fq, nb) < nb)
-		return -ENOSPC;
-
-	for (i = 0; i < nb; i++) {
-		u32 idx = fq->cached_prod++ & fq->mask;
-
-		fq->ring[idx] = d[i];
+	(void)arg;
+	for (;;) {
+		sleep(opt_interval);
+		dump_stats();
 	}
 
-	u_smp_wmb();
-
-	*fq->producer = fq->cached_prod;
-
-	return 0;
+	return NULL;
 }
 
-static inline size_t umem_complete_from_kernel(struct xdp_umem_uqueue *cq,
-					       u64 *d, size_t nb)
+static void remove_xdp_program(void)
 {
-	u32 idx, i, entries = umem_nb_avail(cq, nb);
-
-	u_smp_rmb();
-
-	for (i = 0; i < entries; i++) {
-		idx = cq->cached_cons++ & cq->mask;
-		d[i] = cq->ring[idx];
-	}
-
-	if (entries > 0) {
-		u_smp_wmb();
+	__u32 curr_prog_id = 0;
 
-		*cq->consumer = cq->cached_cons;
+	if (bpf_get_link_xdp_id(opt_ifindex, &curr_prog_id, opt_xdp_flags)) {
+		printf("bpf_get_link_xdp_id failed\n");
+		exit(EXIT_FAILURE);
 	}
-
-	return entries;
-}
-
-static inline void *xq_get_data(struct xdpsock *xsk, u64 addr)
-{
-	return &xsk->umem->frames[addr];
+	if (prog_id == curr_prog_id)
+		bpf_set_link_xdp_fd(opt_ifindex, -1, opt_xdp_flags);
+	else if (!curr_prog_id)
+		printf("couldn't find a prog id on a given interface\n");
+	else
+		printf("program on interface changed, not removing\n");
 }
 
-static inline int xq_enq(struct xdp_uqueue *uq,
-			 const struct xdp_desc *descs,
-			 unsigned int ndescs)
+static void int_exit(int sig)
 {
-	struct xdp_desc *r = uq->ring;
-	unsigned int i;
+	struct xsk_umem *umem = xsks[0]->umem->umem;
 
-	if (xq_nb_free(uq, ndescs) < ndescs)
-		return -ENOSPC;
-
-	for (i = 0; i < ndescs; i++) {
-		u32 idx = uq->cached_prod++ & uq->mask;
-
-		r[idx].addr = descs[i].addr;
-		r[idx].len = descs[i].len;
-	}
+	(void)sig;
 
-	u_smp_wmb();
+	dump_stats();
+	xsk_socket__delete(xsks[0]->xsk);
+	(void)xsk_umem__delete(umem);
+	remove_xdp_program();
 
-	*uq->producer = uq->cached_prod;
-	return 0;
+	exit(EXIT_SUCCESS);
 }
 
-static inline int xq_enq_tx_only(struct xdp_uqueue *uq,
-				 unsigned int id, unsigned int ndescs)
+static void __exit_with_error(int error, const char *file, const char *func,
+			      int line)
 {
-	struct xdp_desc *r = uq->ring;
-	unsigned int i;
-
-	if (xq_nb_free(uq, ndescs) < ndescs)
-		return -ENOSPC;
-
-	for (i = 0; i < ndescs; i++) {
-		u32 idx = uq->cached_prod++ & uq->mask;
-
-		r[idx].addr	= (id + i) << FRAME_SHIFT;
-		r[idx].len	= sizeof(pkt_data) - 1;
-	}
-
-	u_smp_wmb();
-
-	*uq->producer = uq->cached_prod;
-	return 0;
+	fprintf(stderr, "%s:%s:%i: errno: %d/\"%s\"\n", file, func,
+		line, error, strerror(error));
+	dump_stats();
+	remove_xdp_program();
+	exit(EXIT_FAILURE);
 }
 
-static inline int xq_deq(struct xdp_uqueue *uq,
-			 struct xdp_desc *descs,
-			 int ndescs)
-{
-	struct xdp_desc *r = uq->ring;
-	unsigned int idx;
-	int i, entries;
-
-	entries = xq_nb_avail(uq, ndescs);
-
-	u_smp_rmb();
-
-	for (i = 0; i < entries; i++) {
-		idx = uq->cached_cons++ & uq->mask;
-		descs[i] = r[idx];
-	}
-
-	if (entries > 0) {
-		u_smp_wmb();
+#define exit_with_error(error) __exit_with_error(error, __FILE__, __func__, \
+						 __LINE__)
 
-		*uq->consumer = uq->cached_cons;
-	}
-
-	return entries;
-}
+static const char pkt_data[] =
+	"\x3c\xfd\xfe\x9e\x7f\x71\xec\xb1\xd7\x98\x3a\xc0\x08\x00\x45\x00"
+	"\x00\x2e\x00\x00\x00\x00\x40\x11\x88\x97\x05\x08\x07\x08\xc8\x14"
+	"\x1e\x04\x10\x92\x10\x92\x00\x1a\x6d\xa3\x34\x33\x1f\x69\x40\x6b"
+	"\x54\x59\xb6\x14\x2d\x11\x44\xbf\xaf\xd9\xbe\xaa";
 
 static void swap_mac_addresses(void *data)
 {
@@ -397,258 +265,73 @@ static void hex_dump(void *pkt, size_t length, u64 addr)
 	printf("\n");
 }
 
-static size_t gen_eth_frame(char *frame)
+static size_t gen_eth_frame(struct xsk_umem_info *umem, u64 addr)
 {
-	memcpy(frame, pkt_data, sizeof(pkt_data) - 1);
+	memcpy(xsk_umem__get_data(umem->umem, addr), pkt_data,
+	       sizeof(pkt_data) - 1);
 	return sizeof(pkt_data) - 1;
 }
 
-static struct xdp_umem *xdp_umem_configure(int sfd)
+static struct xsk_umem_info *xsk_configure_umem(void *buffer, u64 size)
 {
-	int fq_size = FQ_NUM_DESCS, cq_size = CQ_NUM_DESCS;
-	struct xdp_mmap_offsets off;
-	struct xdp_umem_reg mr;
-	struct xdp_umem *umem;
-	socklen_t optlen;
-	void *bufs;
+	struct xsk_umem_info *umem;
+	int ret;
 
 	umem = calloc(1, sizeof(*umem));
-	lassert(umem);
-
-	lassert(posix_memalign(&bufs, getpagesize(), /* PAGE_SIZE aligned */
-			       NUM_FRAMES * FRAME_SIZE) == 0);
-
-	mr.addr = (__u64)bufs;
-	mr.len = NUM_FRAMES * FRAME_SIZE;
-	mr.chunk_size = FRAME_SIZE;
-	mr.headroom = FRAME_HEADROOM;
-
-	lassert(setsockopt(sfd, SOL_XDP, XDP_UMEM_REG, &mr, sizeof(mr)) == 0);
-	lassert(setsockopt(sfd, SOL_XDP, XDP_UMEM_FILL_RING, &fq_size,
-			   sizeof(int)) == 0);
-	lassert(setsockopt(sfd, SOL_XDP, XDP_UMEM_COMPLETION_RING, &cq_size,
-			   sizeof(int)) == 0);
-
-	optlen = sizeof(off);
-	lassert(getsockopt(sfd, SOL_XDP, XDP_MMAP_OFFSETS, &off,
-			   &optlen) == 0);
-
-	umem->fq.map = mmap(0, off.fr.desc +
-			    FQ_NUM_DESCS * sizeof(u64),
-			    PROT_READ | PROT_WRITE,
-			    MAP_SHARED | MAP_POPULATE, sfd,
-			    XDP_UMEM_PGOFF_FILL_RING);
-	lassert(umem->fq.map != MAP_FAILED);
-
-	umem->fq.mask = FQ_NUM_DESCS - 1;
-	umem->fq.size = FQ_NUM_DESCS;
-	umem->fq.producer = umem->fq.map + off.fr.producer;
-	umem->fq.consumer = umem->fq.map + off.fr.consumer;
-	umem->fq.ring = umem->fq.map + off.fr.desc;
-	umem->fq.cached_cons = FQ_NUM_DESCS;
-
-	umem->cq.map = mmap(0, off.cr.desc +
-			     CQ_NUM_DESCS * sizeof(u64),
-			     PROT_READ | PROT_WRITE,
-			     MAP_SHARED | MAP_POPULATE, sfd,
-			     XDP_UMEM_PGOFF_COMPLETION_RING);
-	lassert(umem->cq.map != MAP_FAILED);
-
-	umem->cq.mask = CQ_NUM_DESCS - 1;
-	umem->cq.size = CQ_NUM_DESCS;
-	umem->cq.producer = umem->cq.map + off.cr.producer;
-	umem->cq.consumer = umem->cq.map + off.cr.consumer;
-	umem->cq.ring = umem->cq.map + off.cr.desc;
-
-	umem->frames = bufs;
-	umem->fd = sfd;
+	if (!umem)
+		exit_with_error(errno);
 
-	if (opt_bench == BENCH_TXONLY) {
-		int i;
-
-		for (i = 0; i < NUM_FRAMES * FRAME_SIZE; i += FRAME_SIZE)
-			(void)gen_eth_frame(&umem->frames[i]);
-	}
+	ret = xsk_umem__create(&umem->umem, buffer, size, &umem->fq, &umem->cq,
+			       NULL);
+	if (ret)
+		exit_with_error(-ret);
 
 	return umem;
 }
 
-static struct xdpsock *xsk_configure(struct xdp_umem *umem)
+static struct xsk_socket_info *xsk_configure_socket(struct xsk_umem_info *umem)
 {
-	struct sockaddr_xdp sxdp = {};
-	struct xdp_mmap_offsets off;
-	int sfd, ndescs = NUM_DESCS;
-	struct xdpsock *xsk;
-	bool shared = true;
-	socklen_t optlen;
-	u64 i;
-
-	sfd = socket(PF_XDP, SOCK_RAW, 0);
-	lassert(sfd >= 0);
+	struct xsk_socket_config cfg;
+	struct xsk_socket_info *xsk;
+	int ret;
+	u32 idx;
+	int i;
 
 	xsk = calloc(1, sizeof(*xsk));
-	lassert(xsk);
-
-	xsk->sfd = sfd;
-	xsk->outstanding_tx = 0;
-
-	if (!umem) {
-		shared = false;
-		xsk->umem = xdp_umem_configure(sfd);
-	} else {
-		xsk->umem = umem;
-	}
-
-	lassert(setsockopt(sfd, SOL_XDP, XDP_RX_RING,
-			   &ndescs, sizeof(int)) == 0);
-	lassert(setsockopt(sfd, SOL_XDP, XDP_TX_RING,
-			   &ndescs, sizeof(int)) == 0);
-	optlen = sizeof(off);
-	lassert(getsockopt(sfd, SOL_XDP, XDP_MMAP_OFFSETS, &off,
-			   &optlen) == 0);
-
-	/* Rx */
-	xsk->rx.map = mmap(NULL,
-			   off.rx.desc +
-			   NUM_DESCS * sizeof(struct xdp_desc),
-			   PROT_READ | PROT_WRITE,
-			   MAP_SHARED | MAP_POPULATE, sfd,
-			   XDP_PGOFF_RX_RING);
-	lassert(xsk->rx.map != MAP_FAILED);
-
-	if (!shared) {
-		for (i = 0; i < NUM_DESCS * FRAME_SIZE; i += FRAME_SIZE)
-			lassert(umem_fill_to_kernel(&xsk->umem->fq, &i, 1)
-				== 0);
-	}
-
-	/* Tx */
-	xsk->tx.map = mmap(NULL,
-			   off.tx.desc +
-			   NUM_DESCS * sizeof(struct xdp_desc),
-			   PROT_READ | PROT_WRITE,
-			   MAP_SHARED | MAP_POPULATE, sfd,
-			   XDP_PGOFF_TX_RING);
-	lassert(xsk->tx.map != MAP_FAILED);
-
-	xsk->rx.mask = NUM_DESCS - 1;
-	xsk->rx.size = NUM_DESCS;
-	xsk->rx.producer = xsk->rx.map + off.rx.producer;
-	xsk->rx.consumer = xsk->rx.map + off.rx.consumer;
-	xsk->rx.ring = xsk->rx.map + off.rx.desc;
-
-	xsk->tx.mask = NUM_DESCS - 1;
-	xsk->tx.size = NUM_DESCS;
-	xsk->tx.producer = xsk->tx.map + off.tx.producer;
-	xsk->tx.consumer = xsk->tx.map + off.tx.consumer;
-	xsk->tx.ring = xsk->tx.map + off.tx.desc;
-	xsk->tx.cached_cons = NUM_DESCS;
-
-	sxdp.sxdp_family = PF_XDP;
-	sxdp.sxdp_ifindex = opt_ifindex;
-	sxdp.sxdp_queue_id = opt_queue;
-
-	if (shared) {
-		sxdp.sxdp_flags = XDP_SHARED_UMEM;
-		sxdp.sxdp_shared_umem_fd = umem->fd;
-	} else {
-		sxdp.sxdp_flags = opt_xdp_bind_flags;
-	}
-
-	lassert(bind(sfd, (struct sockaddr *)&sxdp, sizeof(sxdp)) == 0);
+	if (!xsk)
+		exit_with_error(errno);
+
+	xsk->umem = umem;
+	cfg.rx_size = XSK_RING_CONS__DEFAULT_NUM_DESCS;
+	cfg.tx_size = XSK_RING_PROD__DEFAULT_NUM_DESCS;
+	cfg.libbpf_flags = 0;
+	cfg.xdp_flags = opt_xdp_flags;
+	cfg.bind_flags = opt_xdp_bind_flags;
+	ret = xsk_socket__create(&xsk->xsk, opt_if, opt_queue, umem->umem,
+				 &xsk->rx, &xsk->tx, &cfg);
+	if (ret)
+		exit_with_error(-ret);
+
+	ret = bpf_get_link_xdp_id(opt_ifindex, &prog_id, opt_xdp_flags);
+	if (ret)
+		exit_with_error(-ret);
+
+	ret = xsk_ring_prod__reserve(&xsk->umem->fq,
+				     XSK_RING_PROD__DEFAULT_NUM_DESCS,
+				     &idx);
+	if (ret != XSK_RING_PROD__DEFAULT_NUM_DESCS)
+		exit_with_error(-ret);
+	for (i = 0;
+	     i < XSK_RING_PROD__DEFAULT_NUM_DESCS *
+		     XSK_UMEM__DEFAULT_FRAME_SIZE;
+	     i += XSK_UMEM__DEFAULT_FRAME_SIZE)
+		*xsk_ring_prod__fill_addr(&xsk->umem->fq, idx++) = i;
+	xsk_ring_prod__submit(&xsk->umem->fq,
+			      XSK_RING_PROD__DEFAULT_NUM_DESCS);
 
 	return xsk;
 }
 
-static void print_benchmark(bool running)
-{
-	const char *bench_str = "INVALID";
-
-	if (opt_bench == BENCH_RXDROP)
-		bench_str = "rxdrop";
-	else if (opt_bench == BENCH_TXONLY)
-		bench_str = "txonly";
-	else if (opt_bench == BENCH_L2FWD)
-		bench_str = "l2fwd";
-
-	printf("%s:%d %s ", opt_if, opt_queue, bench_str);
-	if (opt_xdp_flags & XDP_FLAGS_SKB_MODE)
-		printf("xdp-skb ");
-	else if (opt_xdp_flags & XDP_FLAGS_DRV_MODE)
-		printf("xdp-drv ");
-	else
-		printf("	");
-
-	if (opt_poll)
-		printf("poll() ");
-
-	if (running) {
-		printf("running...");
-		fflush(stdout);
-	}
-}
-
-static void dump_stats(void)
-{
-	unsigned long now = get_nsecs();
-	long dt = now - prev_time;
-	int i;
-
-	prev_time = now;
-
-	for (i = 0; i < num_socks && xsks[i]; i++) {
-		char *fmt = "%-15s %'-11.0f %'-11lu\n";
-		double rx_pps, tx_pps;
-
-		rx_pps = (xsks[i]->rx_npkts - xsks[i]->prev_rx_npkts) *
-			 1000000000. / dt;
-		tx_pps = (xsks[i]->tx_npkts - xsks[i]->prev_tx_npkts) *
-			 1000000000. / dt;
-
-		printf("\n sock%d@", i);
-		print_benchmark(false);
-		printf("\n");
-
-		printf("%-15s %-11s %-11s %-11.2f\n", "", "pps", "pkts",
-		       dt / 1000000000.);
-		printf(fmt, "rx", rx_pps, xsks[i]->rx_npkts);
-		printf(fmt, "tx", tx_pps, xsks[i]->tx_npkts);
-
-		xsks[i]->prev_rx_npkts = xsks[i]->rx_npkts;
-		xsks[i]->prev_tx_npkts = xsks[i]->tx_npkts;
-	}
-}
-
-static void *poller(void *arg)
-{
-	(void)arg;
-	for (;;) {
-		sleep(opt_interval);
-		dump_stats();
-	}
-
-	return NULL;
-}
-
-static void int_exit(int sig)
-{
-	__u32 curr_prog_id = 0;
-
-	(void)sig;
-	dump_stats();
-	if (bpf_get_link_xdp_id(opt_ifindex, &curr_prog_id, opt_xdp_flags)) {
-		printf("bpf_get_link_xdp_id failed\n");
-		exit(EXIT_FAILURE);
-	}
-	if (prog_id == curr_prog_id)
-		bpf_set_link_xdp_fd(opt_ifindex, -1, opt_xdp_flags);
-	else if (!curr_prog_id)
-		printf("couldn't find a prog id on a given interface\n");
-	else
-		printf("program on interface changed, not removing\n");
-	exit(EXIT_SUCCESS);
-}
-
 static struct option long_options[] = {
 	{"rxdrop", no_argument, 0, 'r'},
 	{"txonly", no_argument, 0, 't'},
@@ -656,7 +339,6 @@ static struct option long_options[] = {
 	{"interface", required_argument, 0, 'i'},
 	{"queue", required_argument, 0, 'q'},
 	{"poll", no_argument, 0, 'p'},
-	{"shared-buffer", no_argument, 0, 's'},
 	{"xdp-skb", no_argument, 0, 'S'},
 	{"xdp-native", no_argument, 0, 'N'},
 	{"interval", required_argument, 0, 'n'},
@@ -676,7 +358,6 @@ static void usage(const char *prog)
 		"  -i, --interface=n	Run on interface n\n"
 		"  -q, --queue=n	Use queue n (default 0)\n"
 		"  -p, --poll		Use poll syscall\n"
-		"  -s, --shared-buffer	Use shared packet buffer\n"
 		"  -S, --xdp-skb=n	Use XDP skb-mod\n"
 		"  -N, --xdp-native=n	Enfore XDP native mode\n"
 		"  -n, --interval=n	Specify statistics update interval (default 1 sec).\n"
@@ -715,9 +396,6 @@ static void parse_command_line(int argc, char **argv)
 		case 'q':
 			opt_queue = atoi(optarg);
 			break;
-		case 's':
-			opt_shared_packet_buffer = 1;
-			break;
 		case 'p':
 			opt_poll = 1;
 			break;
@@ -751,75 +429,104 @@ static void parse_command_line(int argc, char **argv)
 			opt_if);
 		usage(basename(argv[0]));
 	}
+
 }
 
-static void kick_tx(int fd)
+static void kick_tx(struct xsk_socket_info *xsk)
 {
 	int ret;
 
-	ret = sendto(fd, NULL, 0, MSG_DONTWAIT, NULL, 0);
+	ret = sendto(xsk_socket__fd(xsk->xsk), NULL, 0, MSG_DONTWAIT, NULL, 0);
 	if (ret >= 0 || errno == ENOBUFS || errno == EAGAIN || errno == EBUSY)
 		return;
-	lassert(0);
+	exit_with_error(errno);
 }
 
-static inline void complete_tx_l2fwd(struct xdpsock *xsk)
+static inline void complete_tx_l2fwd(struct xsk_socket_info *xsk)
 {
-	u64 descs[BATCH_SIZE];
+	u32 idx_cq, idx_fq;
 	unsigned int rcvd;
 	size_t ndescs;
 
 	if (!xsk->outstanding_tx)
 		return;
 
-	kick_tx(xsk->sfd);
+	kick_tx(xsk);
 	ndescs = (xsk->outstanding_tx > BATCH_SIZE) ? BATCH_SIZE :
-		 xsk->outstanding_tx;
+		xsk->outstanding_tx;
 
 	/* re-add completed Tx buffers */
-	rcvd = umem_complete_from_kernel(&xsk->umem->cq, descs, ndescs);
+	rcvd = xsk_ring_cons__peek(&xsk->umem->cq, ndescs, &idx_cq);
 	if (rcvd > 0) {
-		umem_fill_to_kernel(&xsk->umem->fq, descs, rcvd);
+		unsigned int i;
+		int ret;
+
+		ret = xsk_ring_prod__reserve(&xsk->umem->fq, rcvd, &idx_fq);
+		while (ret != rcvd) {
+			if (ret < 0)
+				exit_with_error(-ret);
+			ret = xsk_ring_prod__reserve(&xsk->umem->fq, rcvd,
+						     &idx_fq);
+		}
+		for (i = 0; i < rcvd; i++)
+			*xsk_ring_prod__fill_addr(&xsk->umem->fq, idx_fq++) =
+				*xsk_ring_cons__comp_addr(&xsk->umem->cq,
+							  idx_cq++);
+
+		xsk_ring_prod__submit(&xsk->umem->fq, rcvd);
+		xsk_ring_cons__release(&xsk->umem->cq, rcvd);
 		xsk->outstanding_tx -= rcvd;
 		xsk->tx_npkts += rcvd;
 	}
 }
 
-static inline void complete_tx_only(struct xdpsock *xsk)
+static inline void complete_tx_only(struct xsk_socket_info *xsk)
 {
-	u64 descs[BATCH_SIZE];
 	unsigned int rcvd;
+	u32 idx;
 
 	if (!xsk->outstanding_tx)
 		return;
 
-	kick_tx(xsk->sfd);
+	kick_tx(xsk);
 
-	rcvd = umem_complete_from_kernel(&xsk->umem->cq, descs, BATCH_SIZE);
+	rcvd = xsk_ring_cons__peek(&xsk->umem->cq, BATCH_SIZE, &idx);
 	if (rcvd > 0) {
+		xsk_ring_cons__release(&xsk->umem->cq, rcvd);
 		xsk->outstanding_tx -= rcvd;
 		xsk->tx_npkts += rcvd;
 	}
 }
 
-static void rx_drop(struct xdpsock *xsk)
+static void rx_drop(struct xsk_socket_info *xsk)
 {
-	struct xdp_desc descs[BATCH_SIZE];
 	unsigned int rcvd, i;
+	u32 idx_rx, idx_fq = 0;
+	int ret;
 
-	rcvd = xq_deq(&xsk->rx, descs, BATCH_SIZE);
+	rcvd = xsk_ring_cons__peek(&xsk->rx, BATCH_SIZE, &idx_rx);
 	if (!rcvd)
 		return;
 
+	ret = xsk_ring_prod__reserve(&xsk->umem->fq, rcvd, &idx_fq);
+	while (ret != rcvd) {
+		if (ret < 0)
+			exit_with_error(-ret);
+		ret = xsk_ring_prod__reserve(&xsk->umem->fq, rcvd, &idx_fq);
+	}
+
 	for (i = 0; i < rcvd; i++) {
-		char *pkt = xq_get_data(xsk, descs[i].addr);
+		u64 addr = xsk_ring_cons__rx_desc(&xsk->rx, idx_rx)->addr;
+		u32 len = xsk_ring_cons__rx_desc(&xsk->rx, idx_rx++)->len;
+		char *pkt = xsk_umem__get_data(xsk->umem->umem, addr);
 
-		hex_dump(pkt, descs[i].len, descs[i].addr);
+		hex_dump(pkt, len, addr);
+		*xsk_ring_prod__fill_addr(&xsk->umem->fq, idx_fq++) = addr;
 	}
 
+	xsk_ring_prod__submit(&xsk->umem->fq, rcvd);
+	xsk_ring_cons__release(&xsk->rx, rcvd);
 	xsk->rx_npkts += rcvd;
-
-	umem_fill_to_kernel_ex(&xsk->umem->fq, descs, rcvd);
 }
 
 static void rx_drop_all(void)
@@ -830,7 +537,7 @@ static void rx_drop_all(void)
 	memset(fds, 0, sizeof(fds));
 
 	for (i = 0; i < num_socks; i++) {
-		fds[i].fd = xsks[i]->sfd;
+		fds[i].fd = xsk_socket__fd(xsks[i]->xsk);
 		fds[i].events = POLLIN;
 		timeout = 1000; /* 1sn */
 	}
@@ -847,14 +554,14 @@ static void rx_drop_all(void)
 	}
 }
 
-static void tx_only(struct xdpsock *xsk)
+static void tx_only(struct xsk_socket_info *xsk)
 {
 	int timeout, ret, nfds = 1;
 	struct pollfd fds[nfds + 1];
-	unsigned int idx = 0;
+	u32 idx, frame_nb = 0;
 
 	memset(fds, 0, sizeof(fds));
-	fds[0].fd = xsk->sfd;
+	fds[0].fd = xsk_socket__fd(xsk->xsk);
 	fds[0].events = POLLOUT;
 	timeout = 1000; /* 1sn */
 
@@ -864,50 +571,73 @@ static void tx_only(struct xdpsock *xsk)
 			if (ret <= 0)
 				continue;
 
-			if (fds[0].fd != xsk->sfd ||
-			    !(fds[0].revents & POLLOUT))
+			if (!(fds[0].revents & POLLOUT))
 				continue;
 		}
 
-		if (xq_nb_free(&xsk->tx, BATCH_SIZE) >= BATCH_SIZE) {
-			lassert(xq_enq_tx_only(&xsk->tx, idx, BATCH_SIZE) == 0);
+		if (xsk_ring_prod__reserve(&xsk->tx, BATCH_SIZE, &idx) ==
+		    BATCH_SIZE) {
+			unsigned int i;
 
+			for (i = 0; i < BATCH_SIZE; i++) {
+				xsk_ring_prod__tx_desc(&xsk->tx, idx + i)->addr
+					= (frame_nb + i) <<
+					XSK_UMEM__DEFAULT_FRAME_SHIFT;
+				xsk_ring_prod__tx_desc(&xsk->tx, idx + i)->len =
+					sizeof(pkt_data) - 1;
+			}
+
+			xsk_ring_prod__submit(&xsk->tx, BATCH_SIZE);
 			xsk->outstanding_tx += BATCH_SIZE;
-			idx += BATCH_SIZE;
-			idx %= NUM_FRAMES;
+			frame_nb += BATCH_SIZE;
+			frame_nb %= NUM_FRAMES;
 		}
 
 		complete_tx_only(xsk);
 	}
 }
 
-static void l2fwd(struct xdpsock *xsk)
+static void l2fwd(struct xsk_socket_info *xsk)
 {
 	for (;;) {
-		struct xdp_desc descs[BATCH_SIZE];
 		unsigned int rcvd, i;
+		u32 idx_rx, idx_tx = 0;
 		int ret;
 
 		for (;;) {
 			complete_tx_l2fwd(xsk);
 
-			rcvd = xq_deq(&xsk->rx, descs, BATCH_SIZE);
+			rcvd = xsk_ring_cons__peek(&xsk->rx, BATCH_SIZE,
+						   &idx_rx);
 			if (rcvd > 0)
 				break;
 		}
 
+		ret = xsk_ring_prod__reserve(&xsk->tx, rcvd, &idx_tx);
+		while (ret != rcvd) {
+			if (ret < 0)
+				exit_with_error(-ret);
+			ret = xsk_ring_prod__reserve(&xsk->tx, rcvd, &idx_tx);
+		}
+
 		for (i = 0; i < rcvd; i++) {
-			char *pkt = xq_get_data(xsk, descs[i].addr);
+			u64 addr = xsk_ring_cons__rx_desc(&xsk->rx,
+							  idx_rx)->addr;
+			u32 len = xsk_ring_cons__rx_desc(&xsk->rx,
+							 idx_rx++)->len;
+			char *pkt = xsk_umem__get_data(xsk->umem->umem, addr);
 
 			swap_mac_addresses(pkt);
 
-			hex_dump(pkt, descs[i].len, descs[i].addr);
+			hex_dump(pkt, len, addr);
+			xsk_ring_prod__tx_desc(&xsk->tx, idx_tx)->addr = addr;
+			xsk_ring_prod__tx_desc(&xsk->tx, idx_tx++)->len = len;
 		}
 
-		xsk->rx_npkts += rcvd;
+		xsk_ring_prod__submit(&xsk->tx, rcvd);
+		xsk_ring_cons__release(&xsk->rx, rcvd);
 
-		ret = xq_enq(&xsk->tx, descs, rcvd);
-		lassert(ret == 0);
+		xsk->rx_npkts += rcvd;
 		xsk->outstanding_tx += rcvd;
 	}
 }
@@ -915,17 +645,10 @@ static void l2fwd(struct xdpsock *xsk)
 int main(int argc, char **argv)
 {
 	struct rlimit r = {RLIM_INFINITY, RLIM_INFINITY};
-	struct bpf_prog_load_attr prog_load_attr = {
-		.prog_type	= BPF_PROG_TYPE_XDP,
-	};
-	int prog_fd, qidconf_map, xsks_map;
-	struct bpf_prog_info info = {};
-	__u32 info_len = sizeof(info);
-	struct bpf_object *obj;
-	char xdp_filename[256];
-	struct bpf_map *map;
-	int i, ret, key = 0;
+	struct xsk_umem_info *umem;
 	pthread_t pt;
+	void *bufs;
+	int ret;
 
 	parse_command_line(argc, argv);
 
@@ -935,67 +658,22 @@ int main(int argc, char **argv)
 		exit(EXIT_FAILURE);
 	}
 
-	snprintf(xdp_filename, sizeof(xdp_filename), "%s_kern.o", argv[0]);
-	prog_load_attr.file = xdp_filename;
-
-	if (bpf_prog_load_xattr(&prog_load_attr, &obj, &prog_fd))
-		exit(EXIT_FAILURE);
-	if (prog_fd < 0) {
-		fprintf(stderr, "ERROR: no program found: %s\n",
-			strerror(prog_fd));
-		exit(EXIT_FAILURE);
-	}
-
-	map = bpf_object__find_map_by_name(obj, "qidconf_map");
-	qidconf_map = bpf_map__fd(map);
-	if (qidconf_map < 0) {
-		fprintf(stderr, "ERROR: no qidconf map found: %s\n",
-			strerror(qidconf_map));
-		exit(EXIT_FAILURE);
-	}
-
-	map = bpf_object__find_map_by_name(obj, "xsks_map");
-	xsks_map = bpf_map__fd(map);
-	if (xsks_map < 0) {
-		fprintf(stderr, "ERROR: no xsks map found: %s\n",
-			strerror(xsks_map));
-		exit(EXIT_FAILURE);
-	}
-
-	if (bpf_set_link_xdp_fd(opt_ifindex, prog_fd, opt_xdp_flags) < 0) {
-		fprintf(stderr, "ERROR: link set xdp fd failed\n");
-		exit(EXIT_FAILURE);
-	}
-
-	ret = bpf_obj_get_info_by_fd(prog_fd, &info, &info_len);
-	if (ret) {
-		printf("can't get prog info - %s\n", strerror(errno));
-		return 1;
-	}
-	prog_id = info.id;
+	ret = posix_memalign(&bufs, getpagesize(), /* PAGE_SIZE aligned */
+			     NUM_FRAMES * XSK_UMEM__DEFAULT_FRAME_SIZE);
+	if (ret)
+		exit_with_error(ret);
 
-	ret = bpf_map_update_elem(qidconf_map, &key, &opt_queue, 0);
-	if (ret) {
-		fprintf(stderr, "ERROR: bpf_map_update_elem qidconf\n");
-		exit(EXIT_FAILURE);
-	}
+       /* Create sockets... */
+	umem = xsk_configure_umem(bufs,
+				  NUM_FRAMES * XSK_UMEM__DEFAULT_FRAME_SIZE);
+	xsks[num_socks++] = xsk_configure_socket(umem);
 
-	/* Create sockets... */
-	xsks[num_socks++] = xsk_configure(NULL);
-
-#if RR_LB
-	for (i = 0; i < MAX_SOCKS - 1; i++)
-		xsks[num_socks++] = xsk_configure(xsks[0]->umem);
-#endif
+	if (opt_bench == BENCH_TXONLY) {
+		int i;
 
-	/* ...and insert them into the map. */
-	for (i = 0; i < num_socks; i++) {
-		key = i;
-		ret = bpf_map_update_elem(xsks_map, &key, &xsks[i]->sfd, 0);
-		if (ret) {
-			fprintf(stderr, "ERROR: bpf_map_update_elem %d\n", i);
-			exit(EXIT_FAILURE);
-		}
+		for (i = 0; i < NUM_FRAMES * XSK_UMEM__DEFAULT_FRAME_SIZE;
+		     i += XSK_UMEM__DEFAULT_FRAME_SIZE)
+			(void)gen_eth_frame(umem, i);
 	}
 
 	signal(SIGINT, int_exit);
@@ -1005,7 +683,8 @@ int main(int argc, char **argv)
 	setlocale(LC_ALL, "");
 
 	ret = pthread_create(&pt, NULL, poller, NULL);
-	lassert(ret == 0);
+	if (ret)
+		exit_with_error(ret);
 
 	prev_time = get_nsecs();
 
-- 
2.7.4


^ permalink raw reply related	[flat|nested] 17+ messages in thread

* Re: [PATCH bpf-next v4 0/2] libbpf: adding AF_XDP support
  2019-02-08 13:05 [PATCH bpf-next v4 0/2] libbpf: adding AF_XDP support Magnus Karlsson
  2019-02-08 13:05 ` [PATCH bpf-next v4 1/2] libbpf: add support for using AF_XDP sockets Magnus Karlsson
  2019-02-08 13:05 ` [PATCH bpf-next v4 2/2] samples/bpf: convert xdpsock to use libbpf for AF_XDP access Magnus Karlsson
@ 2019-02-11  6:33 ` Jean-Mickael Guerin
  2019-02-11  7:52   ` Magnus Karlsson
  2019-02-11 19:48 ` Jonathan Lemon
  3 siblings, 1 reply; 17+ messages in thread
From: Jean-Mickael Guerin @ 2019-02-11  6:33 UTC (permalink / raw)
  To: Magnus Karlsson
  Cc: bjorn.topel, ast, daniel, netdev, jakub.kicinski, bjorn.topel,
	qi.z.zhang, brouer, xiaolong.ye

Hi Magnus,

> * In a future release, I am planning on adding a higher level data
>   plane interface too. This will be based around recvmsg and sendmsg
>   with the use of struct iovec for batching, without the user having
>   to know anything about the underlying four rings of an AF_XDP
>   socket. There will be one semantic difference though from the
>   standard recvmsg and that is that the kernel will fill in the iovecs
>   instead of the application. But the rest should be the same as the
>   libc versions so that application writers feel at home.

You might consider recvmmsg() and sendmmsg() (bulk of multi segments packets?)

Jean-Mickael

^ permalink raw reply	[flat|nested] 17+ messages in thread

* Re: [PATCH bpf-next v4 0/2] libbpf: adding AF_XDP support
  2019-02-11  6:33 ` [PATCH bpf-next v4 0/2] libbpf: adding AF_XDP support Jean-Mickael Guerin
@ 2019-02-11  7:52   ` Magnus Karlsson
  0 siblings, 0 replies; 17+ messages in thread
From: Magnus Karlsson @ 2019-02-11  7:52 UTC (permalink / raw)
  To: Jean-Mickael Guerin
  Cc: Magnus Karlsson, Björn Töpel, ast, Daniel Borkmann,
	Network Development, Jakub Kicinski, Björn Töpel,
	Zhang, Qi Z, Jesper Dangaard Brouer, xiaolong.ye

On Mon, Feb 11, 2019 at 7:34 AM Jean-Mickael Guerin <jmg@6wind.com> wrote:
>
> Hi Magnus,
>
> > * In a future release, I am planning on adding a higher level data
> >   plane interface too. This will be based around recvmsg and sendmsg
> >   with the use of struct iovec for batching, without the user having
> >   to know anything about the underlying four rings of an AF_XDP
> >   socket. There will be one semantic difference though from the
> >   standard recvmsg and that is that the kernel will fill in the iovecs
> >   instead of the application. But the rest should be the same as the
> >   libc versions so that application writers feel at home.
>
> You might consider recvmmsg() and sendmmsg() (bulk of multi segments packets?)

Exactly :-). Spot on.

/Magnus

> Jean-Mickael

^ permalink raw reply	[flat|nested] 17+ messages in thread

* Re: [PATCH bpf-next v4 0/2] libbpf: adding AF_XDP support
  2019-02-08 13:05 [PATCH bpf-next v4 0/2] libbpf: adding AF_XDP support Magnus Karlsson
                   ` (2 preceding siblings ...)
  2019-02-11  6:33 ` [PATCH bpf-next v4 0/2] libbpf: adding AF_XDP support Jean-Mickael Guerin
@ 2019-02-11 19:48 ` Jonathan Lemon
  2019-02-13 11:32   ` Magnus Karlsson
  3 siblings, 1 reply; 17+ messages in thread
From: Jonathan Lemon @ 2019-02-11 19:48 UTC (permalink / raw)
  To: Magnus Karlsson
  Cc: bjorn.topel, ast, daniel, netdev, jakub.kicinski, bjorn.topel,
	qi.z.zhang, brouer, xiaolong.ye

On 8 Feb 2019, at 5:05, Magnus Karlsson wrote:

> This patch proposes to add AF_XDP support to libbpf. The main reason
> for this is to facilitate writing applications that use AF_XDP by
> offering higher-level APIs that hide many of the details of the AF_XDP
> uapi. This is in the same vein as libbpf facilitates XDP adoption by
> offering easy-to-use higher level interfaces of XDP
> functionality. Hopefully this will facilitate adoption of AF_XDP, make
> applications using it simpler and smaller, and finally also make it
> possible for applications to benefit from optimizations in the AF_XDP
> user space access code. Previously, people just copied and pasted the
> code from the sample application into their application, which is not
> desirable.

I like the idea of encapsulating the boilerplate logic in a library.

I do think there is an important missing piece though - there should be
some code which queries the netdev for how many queues are attached, and
create the appropriate number of umem/AF_XDP sockets.

I ran into this issue when testing the current AF_XDP code - on my test
boxes, the mlx5 card has 55 channels (aka queues), so when the test program
binds only to channel 0, nothing works as expected, since not all traffic
is being intercepted.  While obvious in hindsight, this took a while to
track down.
-- 
Jonathan

^ permalink raw reply	[flat|nested] 17+ messages in thread

* Re: [PATCH bpf-next v4 0/2] libbpf: adding AF_XDP support
  2019-02-11 19:48 ` Jonathan Lemon
@ 2019-02-13 11:32   ` Magnus Karlsson
  2019-02-13 11:55     ` Jesper Dangaard Brouer
  2019-02-13 20:49     ` Jonathan Lemon
  0 siblings, 2 replies; 17+ messages in thread
From: Magnus Karlsson @ 2019-02-13 11:32 UTC (permalink / raw)
  To: Jonathan Lemon
  Cc: Magnus Karlsson, Björn Töpel, ast, Daniel Borkmann,
	Network Development, Jakub Kicinski, Björn Töpel,
	Zhang, Qi Z, Jesper Dangaard Brouer, xiaolong.ye

On Mon, Feb 11, 2019 at 9:44 PM Jonathan Lemon <jonathan.lemon@gmail.com> wrote:
>
> On 8 Feb 2019, at 5:05, Magnus Karlsson wrote:
>
> > This patch proposes to add AF_XDP support to libbpf. The main reason
> > for this is to facilitate writing applications that use AF_XDP by
> > offering higher-level APIs that hide many of the details of the AF_XDP
> > uapi. This is in the same vein as libbpf facilitates XDP adoption by
> > offering easy-to-use higher level interfaces of XDP
> > functionality. Hopefully this will facilitate adoption of AF_XDP, make
> > applications using it simpler and smaller, and finally also make it
> > possible for applications to benefit from optimizations in the AF_XDP
> > user space access code. Previously, people just copied and pasted the
> > code from the sample application into their application, which is not
> > desirable.
>
> I like the idea of encapsulating the boilerplate logic in a library.
>
> I do think there is an important missing piece though - there should be
> some code which queries the netdev for how many queues are attached, and
> create the appropriate number of umem/AF_XDP sockets.
>
> I ran into this issue when testing the current AF_XDP code - on my test
> boxes, the mlx5 card has 55 channels (aka queues), so when the test program
> binds only to channel 0, nothing works as expected, since not all traffic
> is being intercepted.  While obvious in hindsight, this took a while to
> track down.

Yes, agreed. You are not the first one to stumble upon this problem
:-). Let me think a little bit on how to solve this in a good way. We
need this to be simple and intuitive, as you say.

/Magnus

> --
> Jonathan

^ permalink raw reply	[flat|nested] 17+ messages in thread

* Re: [PATCH bpf-next v4 0/2] libbpf: adding AF_XDP support
  2019-02-13 11:32   ` Magnus Karlsson
@ 2019-02-13 11:55     ` Jesper Dangaard Brouer
  2019-02-15 16:20       ` Daniel Borkmann
  2019-02-13 20:49     ` Jonathan Lemon
  1 sibling, 1 reply; 17+ messages in thread
From: Jesper Dangaard Brouer @ 2019-02-13 11:55 UTC (permalink / raw)
  To: Magnus Karlsson
  Cc: Jonathan Lemon, Magnus Karlsson, Björn Töpel, ast,
	Daniel Borkmann, Network Development, Jakub Kicinski,
	Björn Töpel, Zhang, Qi Z, xiaolong.ye, brouer,
	xdp-newbies

On Wed, 13 Feb 2019 12:32:47 +0100
Magnus Karlsson <magnus.karlsson@gmail.com> wrote:

> On Mon, Feb 11, 2019 at 9:44 PM Jonathan Lemon <jonathan.lemon@gmail.com> wrote:
> >
> > On 8 Feb 2019, at 5:05, Magnus Karlsson wrote:
> >  
> > > This patch proposes to add AF_XDP support to libbpf. The main reason
> > > for this is to facilitate writing applications that use AF_XDP by
> > > offering higher-level APIs that hide many of the details of the AF_XDP
> > > uapi. This is in the same vein as libbpf facilitates XDP adoption by
> > > offering easy-to-use higher level interfaces of XDP
> > > functionality. Hopefully this will facilitate adoption of AF_XDP, make
> > > applications using it simpler and smaller, and finally also make it
> > > possible for applications to benefit from optimizations in the AF_XDP
> > > user space access code. Previously, people just copied and pasted the
> > > code from the sample application into their application, which is not
> > > desirable.  
> >
> > I like the idea of encapsulating the boilerplate logic in a library.
> >
> > I do think there is an important missing piece though - there should be
> > some code which queries the netdev for how many queues are attached, and
> > create the appropriate number of umem/AF_XDP sockets.
> >
> > I ran into this issue when testing the current AF_XDP code - on my test
> > boxes, the mlx5 card has 55 channels (aka queues), so when the test program
> > binds only to channel 0, nothing works as expected, since not all traffic
> > is being intercepted.  While obvious in hindsight, this took a while to
> > track down.  
> 
> Yes, agreed. You are not the first one to stumble upon this problem
> :-). Let me think a little bit on how to solve this in a good way. We
> need this to be simple and intuitive, as you say.

I see people hitting this with AF_XDP all the time... I had some
backup-slides[2] in our FOSDEM presentation[1] that describe the issue,
give the performance reason why and propose a workaround.

[1] https://github.com/xdp-project/xdp-project/tree/master/conference/FOSDEM2019
[2] https://github.com/xdp-project/xdp-project/blob/master/conference/FOSDEM2019/xdp_building_block.org#backup-slides

Alternative work-around
  * Create as many AF_XDP sockets as RXQs
  * Have userspace poll()/select on all sockets

-- 
Best regards,
  Jesper Dangaard Brouer
  MSc.CS, Principal Kernel Engineer at Red Hat
  LinkedIn: http://www.linkedin.com/in/brouer

* Backup Slides                                                      :export:

** Slide: Where does AF_XDP performance come from?                  :export:

/Lock-free [[https://lwn.net/Articles/169961/][channel]] directly from driver RX-queue into AF_XDP socket/
- Single-Producer/Single-Consumer (SPSC) descriptor ring queues
- *Single*-/Producer/ (SP) via bind to specific RX-*/queue id/*
  * NAPI-softirq assures only 1-CPU process 1-RX-queue id (per sched)
- *Single*-/Consumer/ (SC) via 1-Application
- *Bounded* buffer pool (UMEM) allocated by userspace (register with kernel)
  * Descriptor(s) in ring(s) point into UMEM
  * /No memory allocation/, but return frames to UMEM in timely manner
- [[http://www.lemis.com/grog/Documentation/vj/lca06vj.pdf][Transport signature]] Van Jacobson talked about
  * Replaced by XDP/eBPF program choosing to XDP_REDIRECT

** Slide: Details: Actually *four* SPSC ring queues                 :export:

AF_XDP /socket/: Has /two rings/: *RX* and *TX*
 - Descriptor(s) in ring points into UMEM
/UMEM/ consists of a number of equally sized chunks
 - Has /two rings/: *FILL* ring and *COMPLETION* ring
 - FILL ring: application gives kernel area to RX fill
 - COMPLETION ring: kernel tells app TX is done for area (can be reused)

** Slide: Gotcha by RX-queue id binding                             :export:

AF_XDP bound to */single RX-queue id/* (for SPSC performance reasons)
- NIC by default spreads flows with RSS-hashing over RX-queues
  * Traffic likely not hitting queue you expect
- You *MUST* configure NIC *HW filters* to /steer to RX-queue id/
  * Out of scope for XDP setup
  * Use ethtool or TC HW offloading for filter setup
- *Alternative* work-around
  * /Create as many AF_XDP sockets as RXQs/
  * Have userspace poll()/select on all sockets


^ permalink raw reply	[flat|nested] 17+ messages in thread

* Re: [PATCH bpf-next v4 0/2] libbpf: adding AF_XDP support
  2019-02-13 11:32   ` Magnus Karlsson
  2019-02-13 11:55     ` Jesper Dangaard Brouer
@ 2019-02-13 20:49     ` Jonathan Lemon
  2019-02-14  8:25       ` Magnus Karlsson
  1 sibling, 1 reply; 17+ messages in thread
From: Jonathan Lemon @ 2019-02-13 20:49 UTC (permalink / raw)
  To: Magnus Karlsson
  Cc: Magnus Karlsson, Björn Töpel, ast, Daniel Borkmann,
	Network Development, Jakub Kicinski, Björn Töpel,
	Zhang, Qi Z, Jesper Dangaard Brouer, xiaolong.ye

On 13 Feb 2019, at 3:32, Magnus Karlsson wrote:

> On Mon, Feb 11, 2019 at 9:44 PM Jonathan Lemon 
> <jonathan.lemon@gmail.com> wrote:
>>
>> On 8 Feb 2019, at 5:05, Magnus Karlsson wrote:
>>
>>> This patch proposes to add AF_XDP support to libbpf. The main reason
>>> for this is to facilitate writing applications that use AF_XDP by
>>> offering higher-level APIs that hide many of the details of the 
>>> AF_XDP
>>> uapi. This is in the same vein as libbpf facilitates XDP adoption by
>>> offering easy-to-use higher level interfaces of XDP
>>> functionality. Hopefully this will facilitate adoption of AF_XDP, 
>>> make
>>> applications using it simpler and smaller, and finally also make it
>>> possible for applications to benefit from optimizations in the 
>>> AF_XDP
>>> user space access code. Previously, people just copied and pasted 
>>> the
>>> code from the sample application into their application, which is 
>>> not
>>> desirable.
>>
>> I like the idea of encapsulating the boilerplate logic in a library.
>>
>> I do think there is an important missing piece though - there should 
>> be
>> some code which queries the netdev for how many queues are attached, 
>> and
>> create the appropriate number of umem/AF_XDP sockets.
>>
>> I ran into this issue when testing the current AF_XDP code - on my 
>> test
>> boxes, the mlx5 card has 55 channels (aka queues), so when the test 
>> program
>> binds only to channel 0, nothing works as expected, since not all 
>> traffic
>> is being intercepted.  While obvious in hindsight, this took a while 
>> to
>> track down.
>
> Yes, agreed. You are not the first one to stumble upon this problem
> :-). Let me think a little bit on how to solve this in a good way. We
> need this to be simple and intuitive, as you say.

Has any investigation been done on using some variant of MPSC 
implementation
as an intermediate form for AF_XDP?  E.g.: something like LCRQ or the 
bulkQ
in bpf devmap/cpumap.  I'm aware that this would be slightly slower, as 
it
would introduce a lock in the path, but I'd think that having DEVMAP, 
CPUMAP
and XSKMAP all behave the same way would add more flexibility.

Ideally, if the configuration matches the underlying hardware, then the
implementation would reduce to the current setup (and allow ZC 
implementations),
but a non-matching configuration would still work - as opposed to the 
current
situation.
-- 
Jonathan

^ permalink raw reply	[flat|nested] 17+ messages in thread

* Re: [PATCH bpf-next v4 0/2] libbpf: adding AF_XDP support
  2019-02-13 20:49     ` Jonathan Lemon
@ 2019-02-14  8:25       ` Magnus Karlsson
  0 siblings, 0 replies; 17+ messages in thread
From: Magnus Karlsson @ 2019-02-14  8:25 UTC (permalink / raw)
  To: Jonathan Lemon
  Cc: Magnus Karlsson, Björn Töpel, ast, Daniel Borkmann,
	Network Development, Jakub Kicinski, Björn Töpel,
	Zhang, Qi Z, Jesper Dangaard Brouer, xiaolong.ye

On Wed, Feb 13, 2019 at 9:49 PM Jonathan Lemon <jonathan.lemon@gmail.com> wrote:
>
> On 13 Feb 2019, at 3:32, Magnus Karlsson wrote:
>
> > On Mon, Feb 11, 2019 at 9:44 PM Jonathan Lemon
> > <jonathan.lemon@gmail.com> wrote:
> >>
> >> On 8 Feb 2019, at 5:05, Magnus Karlsson wrote:
> >>
> >>> This patch proposes to add AF_XDP support to libbpf. The main reason
> >>> for this is to facilitate writing applications that use AF_XDP by
> >>> offering higher-level APIs that hide many of the details of the
> >>> AF_XDP
> >>> uapi. This is in the same vein as libbpf facilitates XDP adoption by
> >>> offering easy-to-use higher level interfaces of XDP
> >>> functionality. Hopefully this will facilitate adoption of AF_XDP,
> >>> make
> >>> applications using it simpler and smaller, and finally also make it
> >>> possible for applications to benefit from optimizations in the
> >>> AF_XDP
> >>> user space access code. Previously, people just copied and pasted
> >>> the
> >>> code from the sample application into their application, which is
> >>> not
> >>> desirable.
> >>
> >> I like the idea of encapsulating the boilerplate logic in a library.
> >>
> >> I do think there is an important missing piece though - there should
> >> be
> >> some code which queries the netdev for how many queues are attached,
> >> and
> >> create the appropriate number of umem/AF_XDP sockets.
> >>
> >> I ran into this issue when testing the current AF_XDP code - on my
> >> test
> >> boxes, the mlx5 card has 55 channels (aka queues), so when the test
> >> program
> >> binds only to channel 0, nothing works as expected, since not all
> >> traffic
> >> is being intercepted.  While obvious in hindsight, this took a while
> >> to
> >> track down.
> >
> > Yes, agreed. You are not the first one to stumble upon this problem
> > :-). Let me think a little bit on how to solve this in a good way. We
> > need this to be simple and intuitive, as you say.
>
> Has any investigation been done on using some variant of MPSC
> implementation
> as an intermediate form for AF_XDP?  E.g.: something like LCRQ or the
> bulkQ
> in bpf devmap/cpumap.  I'm aware that this would be slightly slower, as
> it
> would introduce a lock in the path, but I'd think that having DEVMAP,
> CPUMAP
> and XSKMAP all behave the same way would add more flexibility.

Not as far as I know. But adding the option of having a MPSC or even
MPMC queues has been on the todo list for a while, however, the
current focus of Björn and myself is to upstream the performance
improvements from the Linux Plumbers paper, improve ease-of-use, and
help Jesper et al. with the per-queue XDP program implementation
(which will increase both performance and ease-of-use). If anyone has
some spare cycles out there, please go ahead and give MPSC or MPMC
queues a try :-).

/Magnus

> Ideally, if the configuration matches the underlying hardware, then the
> implementation would reduce to the current setup (and allow ZC
> implementations),
> but a non-matching configuration would still work - as opposed to the
> current
> situation.
> --
> Jonathan

^ permalink raw reply	[flat|nested] 17+ messages in thread

* Re: [PATCH bpf-next v4 0/2] libbpf: adding AF_XDP support
  2019-02-13 11:55     ` Jesper Dangaard Brouer
@ 2019-02-15 16:20       ` Daniel Borkmann
  2019-02-18  8:20         ` Magnus Karlsson
  0 siblings, 1 reply; 17+ messages in thread
From: Daniel Borkmann @ 2019-02-15 16:20 UTC (permalink / raw)
  To: Jesper Dangaard Brouer, Magnus Karlsson
  Cc: Jonathan Lemon, Magnus Karlsson, Björn Töpel, ast,
	Network Development, Jakub Kicinski, Björn Töpel,
	Zhang, Qi Z, xiaolong.ye, xdp-newbies

On 02/13/2019 12:55 PM, Jesper Dangaard Brouer wrote:
> On Wed, 13 Feb 2019 12:32:47 +0100
> Magnus Karlsson <magnus.karlsson@gmail.com> wrote:
>> On Mon, Feb 11, 2019 at 9:44 PM Jonathan Lemon <jonathan.lemon@gmail.com> wrote:
>>> On 8 Feb 2019, at 5:05, Magnus Karlsson wrote:
>>>  
>>>> This patch proposes to add AF_XDP support to libbpf. The main reason
>>>> for this is to facilitate writing applications that use AF_XDP by
>>>> offering higher-level APIs that hide many of the details of the AF_XDP
>>>> uapi. This is in the same vein as libbpf facilitates XDP adoption by
>>>> offering easy-to-use higher level interfaces of XDP
>>>> functionality. Hopefully this will facilitate adoption of AF_XDP, make
>>>> applications using it simpler and smaller, and finally also make it
>>>> possible for applications to benefit from optimizations in the AF_XDP
>>>> user space access code. Previously, people just copied and pasted the
>>>> code from the sample application into their application, which is not
>>>> desirable.  
>>>
>>> I like the idea of encapsulating the boilerplate logic in a library.
>>>
>>> I do think there is an important missing piece though - there should be
>>> some code which queries the netdev for how many queues are attached, and
>>> create the appropriate number of umem/AF_XDP sockets.
>>>
>>> I ran into this issue when testing the current AF_XDP code - on my test
>>> boxes, the mlx5 card has 55 channels (aka queues), so when the test program
>>> binds only to channel 0, nothing works as expected, since not all traffic
>>> is being intercepted.  While obvious in hindsight, this took a while to
>>> track down.  
>>
>> Yes, agreed. You are not the first one to stumble upon this problem
>> :-). Let me think a little bit on how to solve this in a good way. We
>> need this to be simple and intuitive, as you say.
> 
> I see people hitting this with AF_XDP all the time... I had some
> backup-slides[2] in our FOSDEM presentation[1] that describe the issue,
> give the performance reason why and propose a workaround.

Magnus, I presume you're going to address this for the initial libbpf merge
since the plan is to make it easier to consume for users?

Few more minor items in individual patches, will reply there.

Thanks,
Daniel

> [1] https://github.com/xdp-project/xdp-project/tree/master/conference/FOSDEM2019
> [2] https://github.com/xdp-project/xdp-project/blob/master/conference/FOSDEM2019/xdp_building_block.org#backup-slides
> 
> Alternative work-around
>   * Create as many AF_XDP sockets as RXQs
>   * Have userspace poll()/select on all sockets
> 


^ permalink raw reply	[flat|nested] 17+ messages in thread

* Re: [PATCH bpf-next v4 1/2] libbpf: add support for using AF_XDP sockets
  2019-02-08 13:05 ` [PATCH bpf-next v4 1/2] libbpf: add support for using AF_XDP sockets Magnus Karlsson
@ 2019-02-15 16:37   ` Daniel Borkmann
  2019-02-18  8:59     ` Magnus Karlsson
  0 siblings, 1 reply; 17+ messages in thread
From: Daniel Borkmann @ 2019-02-15 16:37 UTC (permalink / raw)
  To: Magnus Karlsson, bjorn.topel, ast, netdev, jakub.kicinski,
	bjorn.topel, qi.z.zhang
  Cc: brouer, xiaolong.ye

On 02/08/2019 02:05 PM, Magnus Karlsson wrote:
> This commit adds AF_XDP support to libbpf. The main reason for this is
> to facilitate writing applications that use AF_XDP by offering
> higher-level APIs that hide many of the details of the AF_XDP
> uapi. This is in the same vein as libbpf facilitates XDP adoption by
> offering easy-to-use higher level interfaces of XDP
> functionality. Hopefully this will facilitate adoption of AF_XDP, make
> applications using it simpler and smaller, and finally also make it
> possible for applications to benefit from optimizations in the AF_XDP
> user space access code. Previously, people just copied and pasted the
> code from the sample application into their application, which is not
> desirable.
> 
> The interface is composed of two parts:
> 
> * Low-level access interface to the four rings and the packet
> * High-level control plane interface for creating and setting
>   up umems and af_xdp sockets as well as a simple XDP program.
> 
> Tested-by: Björn Töpel <bjorn.topel@intel.com>
> Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
[...]
> diff --git a/tools/lib/bpf/xsk.c b/tools/lib/bpf/xsk.c
> new file mode 100644
> index 0000000..a982a76
> --- /dev/null
> +++ b/tools/lib/bpf/xsk.c
> @@ -0,0 +1,742 @@
> +// SPDX-License-Identifier: (LGPL-2.1 OR BSD-2-Clause)
> +
> +/*
> + * AF_XDP user-space access library.
> + *
> + * Copyright(c) 2018 - 2019 Intel Corporation.
> + *
> + * Author(s): Magnus Karlsson <magnus.karlsson@intel.com>
> + */
> +
> +#include <errno.h>
> +#include <stdlib.h>
> +#include <string.h>
> +#include <unistd.h>
> +#include <arpa/inet.h>
> +#include <asm/barrier.h>
> +#include <linux/compiler.h>
> +#include <linux/filter.h>
> +#include <linux/if_ether.h>
> +#include <linux/if_link.h>
> +#include <linux/if_packet.h>
> +#include <linux/if_xdp.h>
> +#include <linux/rtnetlink.h>
> +#include <net/if.h>
> +#include <sys/mman.h>
> +#include <sys/socket.h>
> +#include <sys/types.h>
> +
> +#include "bpf.h"
> +#include "libbpf.h"
> +#include "libbpf_util.h"
> +#include "nlattr.h"
> +#include "xsk.h"
> +
> +#ifndef SOL_XDP
> + #define SOL_XDP 283
> +#endif
> +
> +#ifndef AF_XDP
> + #define AF_XDP 44
> +#endif
> +
> +#ifndef PF_XDP
> + #define PF_XDP AF_XDP
> +#endif
> +
> +struct xsk_umem {
> +	struct xsk_ring_prod *fill;
> +	struct xsk_ring_cons *comp;
> +	char *umem_area;
> +	struct xsk_umem_config config;
> +	int fd;
> +	int refcount;
> +};
> +
> +struct xsk_socket {
> +	struct xsk_ring_cons *rx;
> +	struct xsk_ring_prod *tx;
> +	__u64 outstanding_tx;
> +	struct xsk_umem *umem;
> +	struct xsk_socket_config config;
> +	int fd;
> +	int xsks_map;
> +	int ifindex;
> +	int prog_fd;
> +	int qidconf_map_fd;
> +	int xsks_map_fd;
> +	__u32 queue_id;
> +};
> +
> +struct xsk_nl_info {
> +	bool xdp_prog_attached;
> +	int ifindex;
> +	int fd;
> +};
> +
> +#define MAX_QUEUES 128

Why is this a fixed constant here, shouldn't this be dynamic due to being NIC
specific anyway?

[...]
> +void *xsk_umem__get_data(struct xsk_umem *umem, __u64 addr)
> +{
> +	return &((char *)(umem->umem_area))[addr];
> +}

There's also a xsk_umem__get_data_raw() doing the same. Why having both, resp.
when to choose which? ;)

> +int xsk_umem__fd(const struct xsk_umem *umem)
> +{
> +	return umem ? umem->fd : -EINVAL;
> +}
> +
> +int xsk_socket__fd(const struct xsk_socket *xsk)
> +{
> +	return xsk ? xsk->fd : -EINVAL;
> +}
> +
> +static bool xsk_page_aligned(void *buffer)
> +{
> +	unsigned long addr = (unsigned long)buffer;
> +
> +	return !(addr & (getpagesize() - 1));
> +}
> +
> +static void xsk_set_umem_config(struct xsk_umem_config *cfg,
> +				const struct xsk_umem_config *usr_cfg)
> +{
> +	if (!usr_cfg) {
> +		cfg->fill_size = XSK_RING_PROD__DEFAULT_NUM_DESCS;
> +		cfg->comp_size = XSK_RING_CONS__DEFAULT_NUM_DESCS;
> +		cfg->frame_size = XSK_UMEM__DEFAULT_FRAME_SIZE;
> +		cfg->frame_headroom = XSK_UMEM__DEFAULT_FRAME_HEADROOM;
> +		return;
> +	}
> +
> +	cfg->fill_size = usr_cfg->fill_size;
> +	cfg->comp_size = usr_cfg->comp_size;
> +	cfg->frame_size = usr_cfg->frame_size;
> +	cfg->frame_headroom = usr_cfg->frame_headroom;

Just optional nit, might be a bit nicer to have it in this form:

	cfg->fill_size = usr_cfg ? usr_cfg->fill_size :
		         XSK_RING_PROD__DEFAULT_NUM_DESCS;


> +}
> +
> +static void xsk_set_xdp_socket_config(struct xsk_socket_config *cfg,
> +				      const struct xsk_socket_config *usr_cfg)
> +{
> +	if (!usr_cfg) {
> +		cfg->rx_size = XSK_RING_CONS__DEFAULT_NUM_DESCS;
> +		cfg->tx_size = XSK_RING_PROD__DEFAULT_NUM_DESCS;
> +		cfg->libbpf_flags = 0;
> +		cfg->xdp_flags = 0;
> +		cfg->bind_flags = 0;
> +		return;
> +	}
> +
> +	cfg->rx_size = usr_cfg->rx_size;
> +	cfg->tx_size = usr_cfg->tx_size;
> +	cfg->libbpf_flags = usr_cfg->libbpf_flags;
> +	cfg->xdp_flags = usr_cfg->xdp_flags;
> +	cfg->bind_flags = usr_cfg->bind_flags;

(Ditto)

> +}
> +
> +int xsk_umem__create(struct xsk_umem **umem_ptr, void *umem_area, __u64 size,
> +		     struct xsk_ring_prod *fill, struct xsk_ring_cons *comp,
> +		     const struct xsk_umem_config *usr_config)
> +{
> +	struct xdp_mmap_offsets off;
> +	struct xdp_umem_reg mr;
> +	struct xsk_umem *umem;
> +	socklen_t optlen;
> +	void *map;
> +	int err;
> +
> +	if (!umem_area || !umem_ptr || !fill || !comp)
> +		return -EFAULT;
> +	if (!size && !xsk_page_aligned(umem_area))
> +		return -EINVAL;
> +
> +	umem = calloc(1, sizeof(*umem));
> +	if (!umem)
> +		return -ENOMEM;
> +
> +	umem->fd = socket(AF_XDP, SOCK_RAW, 0);
> +	if (umem->fd < 0) {
> +		err = -errno;
> +		goto out_umem_alloc;
> +	}
> +
> +	umem->umem_area = umem_area;
> +	xsk_set_umem_config(&umem->config, usr_config);
> +
> +	mr.addr = (uintptr_t)umem_area;
> +	mr.len = size;
> +	mr.chunk_size = umem->config.frame_size;
> +	mr.headroom = umem->config.frame_headroom;
> +
> +	err = setsockopt(umem->fd, SOL_XDP, XDP_UMEM_REG, &mr, sizeof(mr));
> +	if (err) {
> +		err = -errno;
> +		goto out_socket;
> +	}
> +	err = setsockopt(umem->fd, SOL_XDP, XDP_UMEM_FILL_RING,
> +			 &umem->config.fill_size,
> +			 sizeof(umem->config.fill_size));
> +	if (err) {
> +		err = -errno;
> +		goto out_socket;
> +	}
> +	err = setsockopt(umem->fd, SOL_XDP, XDP_UMEM_COMPLETION_RING,
> +			 &umem->config.comp_size,
> +			 sizeof(umem->config.comp_size));
> +	if (err) {
> +		err = -errno;
> +		goto out_socket;
> +	}
> +
> +	optlen = sizeof(off);
> +	err = getsockopt(umem->fd, SOL_XDP, XDP_MMAP_OFFSETS, &off, &optlen);
> +	if (err) {
> +		err = -errno;
> +		goto out_socket;
> +	}
> +
> +	map = xsk_mmap(NULL, off.fr.desc +
> +		       umem->config.fill_size * sizeof(__u64),
> +		       PROT_READ | PROT_WRITE, MAP_SHARED | MAP_POPULATE,
> +		       umem->fd, XDP_UMEM_PGOFF_FILL_RING);
> +	if (map == MAP_FAILED) {
> +		err = -errno;
> +		goto out_socket;
> +	}
> +
> +	umem->fill = fill;
> +	fill->mask = umem->config.fill_size - 1;
> +	fill->size = umem->config.fill_size;
> +	fill->producer = map + off.fr.producer;
> +	fill->consumer = map + off.fr.consumer;
> +	fill->ring = map + off.fr.desc;
> +	fill->cached_cons = umem->config.fill_size;
> +
> +	map = xsk_mmap(NULL,
> +		       off.cr.desc + umem->config.comp_size * sizeof(__u64),
> +		       PROT_READ | PROT_WRITE, MAP_SHARED | MAP_POPULATE,
> +		       umem->fd, XDP_UMEM_PGOFF_COMPLETION_RING);
> +	if (map == MAP_FAILED) {
> +		err = -errno;
> +		goto out_mmap;
> +	}
> +
> +	umem->comp = comp;
> +	comp->mask = umem->config.comp_size - 1;
> +	comp->size = umem->config.comp_size;
> +	comp->producer = map + off.cr.producer;
> +	comp->consumer = map + off.cr.consumer;
> +	comp->ring = map + off.cr.desc;
> +
> +	*umem_ptr = umem;
> +	return 0;
> +
> +out_mmap:
> +	munmap(umem->fill,
> +	       off.fr.desc + umem->config.fill_size * sizeof(__u64));
> +out_socket:
> +	close(umem->fd);
> +out_umem_alloc:
> +	free(umem);
> +	return err;
> +}
> +
> +static int xsk_parse_nl(void *cookie, void *msg, struct nlattr **tb)
> +{
> +	struct nlattr *tb_parsed[IFLA_XDP_MAX + 1];
> +	struct xsk_nl_info *nl_info = cookie;
> +	struct ifinfomsg *ifinfo = msg;
> +	unsigned char mode;
> +	int err;
> +
> +	if (nl_info->ifindex && nl_info->ifindex != ifinfo->ifi_index)
> +		return 0;
> +
> +	if (!tb[IFLA_XDP])
> +		return 0;
> +
> +	err = libbpf_nla_parse_nested(tb_parsed, IFLA_XDP_MAX, tb[IFLA_XDP],
> +				      NULL);
> +	if (err)
> +		return err;
> +
> +	if (!tb_parsed[IFLA_XDP_ATTACHED] || !tb_parsed[IFLA_XDP_FD])
> +		return 0;
> +
> +	mode = libbpf_nla_getattr_u8(tb_parsed[IFLA_XDP_ATTACHED]);
> +	if (mode == XDP_ATTACHED_NONE)
> +		return 0;
> +
> +	nl_info->xdp_prog_attached = true;
> +	nl_info->fd = libbpf_nla_getattr_u32(tb_parsed[IFLA_XDP_FD]);

Hm, I don't think this works if I read the intention of this helper correctly.

IFLA_XDP_FD is never set for retrieving the prog from the kernel. So the
above is a bug.

We also have bpf_get_link_xdp_id(). This should probably just be reused in
this context here.

> +	return 0;
> +}
> +
> +static bool xsk_xdp_prog_attached(struct xsk_socket *xsk)
> +{
> +	struct xsk_nl_info nl_info;
> +	unsigned int nl_pid;
> +	char err_buf[256];
> +	int sock, err;
> +
> +	sock = libbpf_netlink_open(&nl_pid);
> +	if (sock < 0)
> +		return false;
> +
> +	nl_info.xdp_prog_attached = false;
> +	nl_info.ifindex = xsk->ifindex;
> +	nl_info.fd = -1;
> +
> +	err = libbpf_nl_get_link(sock, nl_pid, xsk_parse_nl, &nl_info);
> +	if (err) {
> +		libbpf_strerror(err, err_buf, sizeof(err_buf));
> +		pr_warning("Error:\n%s\n", err_buf);
> +		close(sock);
> +		return false;
> +	}
> +
> +	close(sock);
> +	xsk->prog_fd = nl_info.fd;
> +	return nl_info.xdp_prog_attached;
> +}

(See bpf_get_link_xdp_id().)

> +
> +static int xsk_load_xdp_prog(struct xsk_socket *xsk)
> +{
> +	char bpf_log_buf[BPF_LOG_BUF_SIZE];
> +	int err, prog_fd;
> +
> +	/* This is the C-program:
> +	 * SEC("xdp_sock") int xdp_sock_prog(struct xdp_md *ctx)
> +	 * {
> +	 *     int *qidconf, index = ctx->rx_queue_index;
[...]
> +
> +int xsk_socket__create(struct xsk_socket **xsk_ptr, const char *ifname,
> +		       __u32 queue_id, struct xsk_umem *umem,
> +		       struct xsk_ring_cons *rx, struct xsk_ring_prod *tx,
> +		       const struct xsk_socket_config *usr_config)
> +{
> +	struct sockaddr_xdp sxdp = {};
> +	struct xdp_mmap_offsets off;
> +	struct xsk_socket *xsk;
> +	socklen_t optlen;
> +	void *map;
> +	int err;
> +
> +	if (!umem || !xsk_ptr || !rx || !tx)
> +		return -EFAULT;
> +
> +	if (umem->refcount) {
> +		pr_warning("Error: shared umems not supported by libbpf.\n");
> +		return -EBUSY;
> +	}
> +
> +	xsk = calloc(1, sizeof(*xsk));
> +	if (!xsk)
> +		return -ENOMEM;
> +
> +	if (umem->refcount++ > 0) {

Should this refcount rather be atomic actually?

> +		xsk->fd = socket(AF_XDP, SOCK_RAW, 0);
> +		if (xsk->fd < 0) {
> +			err = -errno;
> +			goto out_xsk_alloc;
> +		}
> +	} else {
> +		xsk->fd = umem->fd;
> +	}
> +
> +	xsk->outstanding_tx = 0;
> +	xsk->queue_id = queue_id;
> +	xsk->umem = umem;
> +	xsk->ifindex = if_nametoindex(ifname);
> +	if (!xsk->ifindex) {
> +		err = -errno;
> +		goto out_socket;
> +	}
> +
> +	xsk_set_xdp_socket_config(&xsk->config, usr_config);
[...]

^ permalink raw reply	[flat|nested] 17+ messages in thread

* Re: [PATCH bpf-next v4 0/2] libbpf: adding AF_XDP support
  2019-02-15 16:20       ` Daniel Borkmann
@ 2019-02-18  8:20         ` Magnus Karlsson
  2019-02-18  9:38           ` Daniel Borkmann
  0 siblings, 1 reply; 17+ messages in thread
From: Magnus Karlsson @ 2019-02-18  8:20 UTC (permalink / raw)
  To: Daniel Borkmann
  Cc: Jesper Dangaard Brouer, Jonathan Lemon, Magnus Karlsson,
	Björn Töpel, ast, Network Development, Jakub Kicinski,
	Björn Töpel, Zhang, Qi Z, xiaolong.ye, xdp-newbies

On Fri, Feb 15, 2019 at 5:48 PM Daniel Borkmann <daniel@iogearbox.net> wrote:
>
> On 02/13/2019 12:55 PM, Jesper Dangaard Brouer wrote:
> > On Wed, 13 Feb 2019 12:32:47 +0100
> > Magnus Karlsson <magnus.karlsson@gmail.com> wrote:
> >> On Mon, Feb 11, 2019 at 9:44 PM Jonathan Lemon <jonathan.lemon@gmail.com> wrote:
> >>> On 8 Feb 2019, at 5:05, Magnus Karlsson wrote:
> >>>
> >>>> This patch proposes to add AF_XDP support to libbpf. The main reason
> >>>> for this is to facilitate writing applications that use AF_XDP by
> >>>> offering higher-level APIs that hide many of the details of the AF_XDP
> >>>> uapi. This is in the same vein as libbpf facilitates XDP adoption by
> >>>> offering easy-to-use higher level interfaces of XDP
> >>>> functionality. Hopefully this will facilitate adoption of AF_XDP, make
> >>>> applications using it simpler and smaller, and finally also make it
> >>>> possible for applications to benefit from optimizations in the AF_XDP
> >>>> user space access code. Previously, people just copied and pasted the
> >>>> code from the sample application into their application, which is not
> >>>> desirable.
> >>>
> >>> I like the idea of encapsulating the boilerplate logic in a library.
> >>>
> >>> I do think there is an important missing piece though - there should be
> >>> some code which queries the netdev for how many queues are attached, and
> >>> create the appropriate number of umem/AF_XDP sockets.
> >>>
> >>> I ran into this issue when testing the current AF_XDP code - on my test
> >>> boxes, the mlx5 card has 55 channels (aka queues), so when the test program
> >>> binds only to channel 0, nothing works as expected, since not all traffic
> >>> is being intercepted.  While obvious in hindsight, this took a while to
> >>> track down.
> >>
> >> Yes, agreed. You are not the first one to stumble upon this problem
> >> :-). Let me think a little bit on how to solve this in a good way. We
> >> need this to be simple and intuitive, as you say.
> >
> > I see people hitting this with AF_XDP all the time... I had some
> > backup-slides[2] in our FOSDEM presentation[1] that describe the issue,
> > give the performance reason why and propose a workaround.
>
> Magnus, I presume you're going to address this for the initial libbpf merge
> since the plan is to make it easier to consume for users?

I think the first thing we need is education and documentation. Have a
FAQ or "common mistakes" section in the Documentation. And of course,
sending Jesper around the world reminding people about this ;-).

To address this on a libbpf interface level, I think the best way is
to reprogram the NIC to send all traffic to the queue that you
provided in the xsk_socket__create call. This "set up NIC routing"
behavior can then be disable with a flag, just as the XDP program
loading can be disabled. The standard config of xsk_socket__create
will then set up as many things for the user as possible just to get
up and running quickly. More advanced users can then disable parts of
it to gain more flexibility. Does this sound OK? Do not want to go the
route of polling multiple sockets and aggregating the traffic as this
will have significant negative performance implications.

/Magnus

> Few more minor items in individual patches, will reply there.
>
> Thanks,
> Daniel
>
> > [1] https://github.com/xdp-project/xdp-project/tree/master/conference/FOSDEM2019
> > [2] https://github.com/xdp-project/xdp-project/blob/master/conference/FOSDEM2019/xdp_building_block.org#backup-slides
> >
> > Alternative work-around
> >   * Create as many AF_XDP sockets as RXQs
> >   * Have userspace poll()/select on all sockets
> >
>

^ permalink raw reply	[flat|nested] 17+ messages in thread

* Re: [PATCH bpf-next v4 1/2] libbpf: add support for using AF_XDP sockets
  2019-02-15 16:37   ` Daniel Borkmann
@ 2019-02-18  8:59     ` Magnus Karlsson
  2019-02-18 11:21       ` Maciej Fijalkowski
  0 siblings, 1 reply; 17+ messages in thread
From: Magnus Karlsson @ 2019-02-18  8:59 UTC (permalink / raw)
  To: Daniel Borkmann
  Cc: Magnus Karlsson, Björn Töpel, ast, Network Development,
	Jakub Kicinski, Björn Töpel, Zhang, Qi Z,
	Jesper Dangaard Brouer, xiaolong.ye

On Fri, Feb 15, 2019 at 6:09 PM Daniel Borkmann <daniel@iogearbox.net> wrote:
>
> On 02/08/2019 02:05 PM, Magnus Karlsson wrote:
> > This commit adds AF_XDP support to libbpf. The main reason for this is
> > to facilitate writing applications that use AF_XDP by offering
> > higher-level APIs that hide many of the details of the AF_XDP
> > uapi. This is in the same vein as libbpf facilitates XDP adoption by
> > offering easy-to-use higher level interfaces of XDP
> > functionality. Hopefully this will facilitate adoption of AF_XDP, make
> > applications using it simpler and smaller, and finally also make it
> > possible for applications to benefit from optimizations in the AF_XDP
> > user space access code. Previously, people just copied and pasted the
> > code from the sample application into their application, which is not
> > desirable.
> >
> > The interface is composed of two parts:
> >
> > * Low-level access interface to the four rings and the packet
> > * High-level control plane interface for creating and setting
> >   up umems and af_xdp sockets as well as a simple XDP program.
> >
> > Tested-by: Björn Töpel <bjorn.topel@intel.com>
> > Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
> [...]
> > diff --git a/tools/lib/bpf/xsk.c b/tools/lib/bpf/xsk.c
> > new file mode 100644
> > index 0000000..a982a76
> > --- /dev/null
> > +++ b/tools/lib/bpf/xsk.c
> > @@ -0,0 +1,742 @@
> > +// SPDX-License-Identifier: (LGPL-2.1 OR BSD-2-Clause)
> > +
> > +/*
> > + * AF_XDP user-space access library.
> > + *
> > + * Copyright(c) 2018 - 2019 Intel Corporation.
> > + *
> > + * Author(s): Magnus Karlsson <magnus.karlsson@intel.com>
> > + */
> > +
> > +#include <errno.h>
> > +#include <stdlib.h>
> > +#include <string.h>
> > +#include <unistd.h>
> > +#include <arpa/inet.h>
> > +#include <asm/barrier.h>
> > +#include <linux/compiler.h>
> > +#include <linux/filter.h>
> > +#include <linux/if_ether.h>
> > +#include <linux/if_link.h>
> > +#include <linux/if_packet.h>
> > +#include <linux/if_xdp.h>
> > +#include <linux/rtnetlink.h>
> > +#include <net/if.h>
> > +#include <sys/mman.h>
> > +#include <sys/socket.h>
> > +#include <sys/types.h>
> > +
> > +#include "bpf.h"
> > +#include "libbpf.h"
> > +#include "libbpf_util.h"
> > +#include "nlattr.h"
> > +#include "xsk.h"
> > +
> > +#ifndef SOL_XDP
> > + #define SOL_XDP 283
> > +#endif
> > +
> > +#ifndef AF_XDP
> > + #define AF_XDP 44
> > +#endif
> > +
> > +#ifndef PF_XDP
> > + #define PF_XDP AF_XDP
> > +#endif
> > +
> > +struct xsk_umem {
> > +     struct xsk_ring_prod *fill;
> > +     struct xsk_ring_cons *comp;
> > +     char *umem_area;
> > +     struct xsk_umem_config config;
> > +     int fd;
> > +     int refcount;
> > +};
> > +
> > +struct xsk_socket {
> > +     struct xsk_ring_cons *rx;
> > +     struct xsk_ring_prod *tx;
> > +     __u64 outstanding_tx;
> > +     struct xsk_umem *umem;
> > +     struct xsk_socket_config config;
> > +     int fd;
> > +     int xsks_map;
> > +     int ifindex;
> > +     int prog_fd;
> > +     int qidconf_map_fd;
> > +     int xsks_map_fd;
> > +     __u32 queue_id;
> > +};
> > +
> > +struct xsk_nl_info {
> > +     bool xdp_prog_attached;
> > +     int ifindex;
> > +     int fd;
> > +};
> > +
> > +#define MAX_QUEUES 128
>
> Why is this a fixed constant here, shouldn't this be dynamic due to being NIC
> specific anyway?

It was only here for simplicity. If a NIC had more queues, it would
require a recompile of the lib. Obviously, not desirable in a distro.
What I could do is to read the max "combined" queues (pre-set maximum
in the ethtool output) from the same interface as ethool uses and size
the array after that. Or is there a simpler way? What to do if the NIC
does not have a "combined", or is there no such NIC (seems the common
HW ones set this)?

> [...]
> > +void *xsk_umem__get_data(struct xsk_umem *umem, __u64 addr)
> > +{
> > +     return &((char *)(umem->umem_area))[addr];
> > +}
>
> There's also a xsk_umem__get_data_raw() doing the same. Why having both, resp.
> when to choose which? ;)

There is enough to have the xsk_umem__get_data_raw() function.
xsk_umem__get_data() is just a convenience function for which the
application does not have to store the beginning of the umem. But as
the application always has to provide this anyway in the
xsk_umem__create() function, it might as well store this pointer. I
will delete xsk_umem__get_data() and rename xsk_umem__get_data_raw()
to xsk_umem__get_data().

> > +int xsk_umem__fd(const struct xsk_umem *umem)
> > +{
> > +     return umem ? umem->fd : -EINVAL;
> > +}
> > +
> > +int xsk_socket__fd(const struct xsk_socket *xsk)
> > +{
> > +     return xsk ? xsk->fd : -EINVAL;
> > +}
> > +
> > +static bool xsk_page_aligned(void *buffer)
> > +{
> > +     unsigned long addr = (unsigned long)buffer;
> > +
> > +     return !(addr & (getpagesize() - 1));
> > +}
> > +
> > +static void xsk_set_umem_config(struct xsk_umem_config *cfg,
> > +                             const struct xsk_umem_config *usr_cfg)
> > +{
> > +     if (!usr_cfg) {
> > +             cfg->fill_size = XSK_RING_PROD__DEFAULT_NUM_DESCS;
> > +             cfg->comp_size = XSK_RING_CONS__DEFAULT_NUM_DESCS;
> > +             cfg->frame_size = XSK_UMEM__DEFAULT_FRAME_SIZE;
> > +             cfg->frame_headroom = XSK_UMEM__DEFAULT_FRAME_HEADROOM;
> > +             return;
> > +     }
> > +
> > +     cfg->fill_size = usr_cfg->fill_size;
> > +     cfg->comp_size = usr_cfg->comp_size;
> > +     cfg->frame_size = usr_cfg->frame_size;
> > +     cfg->frame_headroom = usr_cfg->frame_headroom;
>
> Just optional nit, might be a bit nicer to have it in this form:
>
>         cfg->fill_size = usr_cfg ? usr_cfg->fill_size :
>                          XSK_RING_PROD__DEFAULT_NUM_DESCS;

I actually think the current form is clearer when there are multiple
lines. If there was only one line, I would agree with you.

> > +}
> > +
> > +static void xsk_set_xdp_socket_config(struct xsk_socket_config *cfg,
> > +                                   const struct xsk_socket_config *usr_cfg)
> > +{
> > +     if (!usr_cfg) {
> > +             cfg->rx_size = XSK_RING_CONS__DEFAULT_NUM_DESCS;
> > +             cfg->tx_size = XSK_RING_PROD__DEFAULT_NUM_DESCS;
> > +             cfg->libbpf_flags = 0;
> > +             cfg->xdp_flags = 0;
> > +             cfg->bind_flags = 0;
> > +             return;
> > +     }
> > +
> > +     cfg->rx_size = usr_cfg->rx_size;
> > +     cfg->tx_size = usr_cfg->tx_size;
> > +     cfg->libbpf_flags = usr_cfg->libbpf_flags;
> > +     cfg->xdp_flags = usr_cfg->xdp_flags;
> > +     cfg->bind_flags = usr_cfg->bind_flags;
>
> (Ditto)
>
> > +}
> > +
> > +int xsk_umem__create(struct xsk_umem **umem_ptr, void *umem_area, __u64 size,
> > +                  struct xsk_ring_prod *fill, struct xsk_ring_cons *comp,
> > +                  const struct xsk_umem_config *usr_config)
> > +{
> > +     struct xdp_mmap_offsets off;
> > +     struct xdp_umem_reg mr;
> > +     struct xsk_umem *umem;
> > +     socklen_t optlen;
> > +     void *map;
> > +     int err;
> > +
> > +     if (!umem_area || !umem_ptr || !fill || !comp)
> > +             return -EFAULT;
> > +     if (!size && !xsk_page_aligned(umem_area))
> > +             return -EINVAL;
> > +
> > +     umem = calloc(1, sizeof(*umem));
> > +     if (!umem)
> > +             return -ENOMEM;
> > +
> > +     umem->fd = socket(AF_XDP, SOCK_RAW, 0);
> > +     if (umem->fd < 0) {
> > +             err = -errno;
> > +             goto out_umem_alloc;
> > +     }
> > +
> > +     umem->umem_area = umem_area;
> > +     xsk_set_umem_config(&umem->config, usr_config);
> > +
> > +     mr.addr = (uintptr_t)umem_area;
> > +     mr.len = size;
> > +     mr.chunk_size = umem->config.frame_size;
> > +     mr.headroom = umem->config.frame_headroom;
> > +
> > +     err = setsockopt(umem->fd, SOL_XDP, XDP_UMEM_REG, &mr, sizeof(mr));
> > +     if (err) {
> > +             err = -errno;
> > +             goto out_socket;
> > +     }
> > +     err = setsockopt(umem->fd, SOL_XDP, XDP_UMEM_FILL_RING,
> > +                      &umem->config.fill_size,
> > +                      sizeof(umem->config.fill_size));
> > +     if (err) {
> > +             err = -errno;
> > +             goto out_socket;
> > +     }
> > +     err = setsockopt(umem->fd, SOL_XDP, XDP_UMEM_COMPLETION_RING,
> > +                      &umem->config.comp_size,
> > +                      sizeof(umem->config.comp_size));
> > +     if (err) {
> > +             err = -errno;
> > +             goto out_socket;
> > +     }
> > +
> > +     optlen = sizeof(off);
> > +     err = getsockopt(umem->fd, SOL_XDP, XDP_MMAP_OFFSETS, &off, &optlen);
> > +     if (err) {
> > +             err = -errno;
> > +             goto out_socket;
> > +     }
> > +
> > +     map = xsk_mmap(NULL, off.fr.desc +
> > +                    umem->config.fill_size * sizeof(__u64),
> > +                    PROT_READ | PROT_WRITE, MAP_SHARED | MAP_POPULATE,
> > +                    umem->fd, XDP_UMEM_PGOFF_FILL_RING);
> > +     if (map == MAP_FAILED) {
> > +             err = -errno;
> > +             goto out_socket;
> > +     }
> > +
> > +     umem->fill = fill;
> > +     fill->mask = umem->config.fill_size - 1;
> > +     fill->size = umem->config.fill_size;
> > +     fill->producer = map + off.fr.producer;
> > +     fill->consumer = map + off.fr.consumer;
> > +     fill->ring = map + off.fr.desc;
> > +     fill->cached_cons = umem->config.fill_size;
> > +
> > +     map = xsk_mmap(NULL,
> > +                    off.cr.desc + umem->config.comp_size * sizeof(__u64),
> > +                    PROT_READ | PROT_WRITE, MAP_SHARED | MAP_POPULATE,
> > +                    umem->fd, XDP_UMEM_PGOFF_COMPLETION_RING);
> > +     if (map == MAP_FAILED) {
> > +             err = -errno;
> > +             goto out_mmap;
> > +     }
> > +
> > +     umem->comp = comp;
> > +     comp->mask = umem->config.comp_size - 1;
> > +     comp->size = umem->config.comp_size;
> > +     comp->producer = map + off.cr.producer;
> > +     comp->consumer = map + off.cr.consumer;
> > +     comp->ring = map + off.cr.desc;
> > +
> > +     *umem_ptr = umem;
> > +     return 0;
> > +
> > +out_mmap:
> > +     munmap(umem->fill,
> > +            off.fr.desc + umem->config.fill_size * sizeof(__u64));
> > +out_socket:
> > +     close(umem->fd);
> > +out_umem_alloc:
> > +     free(umem);
> > +     return err;
> > +}
> > +
> > +static int xsk_parse_nl(void *cookie, void *msg, struct nlattr **tb)
> > +{
> > +     struct nlattr *tb_parsed[IFLA_XDP_MAX + 1];
> > +     struct xsk_nl_info *nl_info = cookie;
> > +     struct ifinfomsg *ifinfo = msg;
> > +     unsigned char mode;
> > +     int err;
> > +
> > +     if (nl_info->ifindex && nl_info->ifindex != ifinfo->ifi_index)
> > +             return 0;
> > +
> > +     if (!tb[IFLA_XDP])
> > +             return 0;
> > +
> > +     err = libbpf_nla_parse_nested(tb_parsed, IFLA_XDP_MAX, tb[IFLA_XDP],
> > +                                   NULL);
> > +     if (err)
> > +             return err;
> > +
> > +     if (!tb_parsed[IFLA_XDP_ATTACHED] || !tb_parsed[IFLA_XDP_FD])
> > +             return 0;
> > +
> > +     mode = libbpf_nla_getattr_u8(tb_parsed[IFLA_XDP_ATTACHED]);
> > +     if (mode == XDP_ATTACHED_NONE)
> > +             return 0;
> > +
> > +     nl_info->xdp_prog_attached = true;
> > +     nl_info->fd = libbpf_nla_getattr_u32(tb_parsed[IFLA_XDP_FD]);
>
> Hm, I don't think this works if I read the intention of this helper correctly.
>
> IFLA_XDP_FD is never set for retrieving the prog from the kernel. So the
> above is a bug.
>
> We also have bpf_get_link_xdp_id(). This should probably just be reused in
> this context here.

If bpf_get_link_xdp_id() will fit my bill, I will happily use it. I
will check it out and hopefully I can drop all this code. Thanks.

> > +     return 0;
> > +}
> > +
> > +static bool xsk_xdp_prog_attached(struct xsk_socket *xsk)
> > +{
> > +     struct xsk_nl_info nl_info;
> > +     unsigned int nl_pid;
> > +     char err_buf[256];
> > +     int sock, err;
> > +
> > +     sock = libbpf_netlink_open(&nl_pid);
> > +     if (sock < 0)
> > +             return false;
> > +
> > +     nl_info.xdp_prog_attached = false;
> > +     nl_info.ifindex = xsk->ifindex;
> > +     nl_info.fd = -1;
> > +
> > +     err = libbpf_nl_get_link(sock, nl_pid, xsk_parse_nl, &nl_info);
> > +     if (err) {
> > +             libbpf_strerror(err, err_buf, sizeof(err_buf));
> > +             pr_warning("Error:\n%s\n", err_buf);
> > +             close(sock);
> > +             return false;
> > +     }
> > +
> > +     close(sock);
> > +     xsk->prog_fd = nl_info.fd;
> > +     return nl_info.xdp_prog_attached;
> > +}
>
> (See bpf_get_link_xdp_id().)
>
> > +
> > +static int xsk_load_xdp_prog(struct xsk_socket *xsk)
> > +{
> > +     char bpf_log_buf[BPF_LOG_BUF_SIZE];
> > +     int err, prog_fd;
> > +
> > +     /* This is the C-program:
> > +      * SEC("xdp_sock") int xdp_sock_prog(struct xdp_md *ctx)
> > +      * {
> > +      *     int *qidconf, index = ctx->rx_queue_index;
> [...]
> > +
> > +int xsk_socket__create(struct xsk_socket **xsk_ptr, const char *ifname,
> > +                    __u32 queue_id, struct xsk_umem *umem,
> > +                    struct xsk_ring_cons *rx, struct xsk_ring_prod *tx,
> > +                    const struct xsk_socket_config *usr_config)
> > +{
> > +     struct sockaddr_xdp sxdp = {};
> > +     struct xdp_mmap_offsets off;
> > +     struct xsk_socket *xsk;
> > +     socklen_t optlen;
> > +     void *map;
> > +     int err;
> > +
> > +     if (!umem || !xsk_ptr || !rx || !tx)
> > +             return -EFAULT;
> > +
> > +     if (umem->refcount) {
> > +             pr_warning("Error: shared umems not supported by libbpf.\n");
> > +             return -EBUSY;
> > +     }
> > +
> > +     xsk = calloc(1, sizeof(*xsk));
> > +     if (!xsk)
> > +             return -ENOMEM;
> > +
> > +     if (umem->refcount++ > 0) {
>
> Should this refcount rather be atomic actually?

Neither our config nor data plane interfaces are reentrant for
performance reasons. Any concurrency has to be handled explicitly on
the application level. This so that it only penalizes apps that really
need this.

Thanks for all your reviews: Magnus

> > +             xsk->fd = socket(AF_XDP, SOCK_RAW, 0);
> > +             if (xsk->fd < 0) {
> > +                     err = -errno;
> > +                     goto out_xsk_alloc;
> > +             }
> > +     } else {
> > +             xsk->fd = umem->fd;
> > +     }
> > +
> > +     xsk->outstanding_tx = 0;
> > +     xsk->queue_id = queue_id;
> > +     xsk->umem = umem;
> > +     xsk->ifindex = if_nametoindex(ifname);
> > +     if (!xsk->ifindex) {
> > +             err = -errno;
> > +             goto out_socket;
> > +     }
> > +
> > +     xsk_set_xdp_socket_config(&xsk->config, usr_config);
> [...]

^ permalink raw reply	[flat|nested] 17+ messages in thread

* Re: [PATCH bpf-next v4 0/2] libbpf: adding AF_XDP support
  2019-02-18  8:20         ` Magnus Karlsson
@ 2019-02-18  9:38           ` Daniel Borkmann
  2019-02-18 10:09             ` Magnus Karlsson
  0 siblings, 1 reply; 17+ messages in thread
From: Daniel Borkmann @ 2019-02-18  9:38 UTC (permalink / raw)
  To: Magnus Karlsson
  Cc: Jesper Dangaard Brouer, Jonathan Lemon, Magnus Karlsson,
	Björn Töpel, ast, Network Development, Jakub Kicinski,
	Björn Töpel, Zhang, Qi Z, xiaolong.ye, xdp-newbies

On 02/18/2019 09:20 AM, Magnus Karlsson wrote:
> On Fri, Feb 15, 2019 at 5:48 PM Daniel Borkmann <daniel@iogearbox.net> wrote:
>>
>> On 02/13/2019 12:55 PM, Jesper Dangaard Brouer wrote:
>>> On Wed, 13 Feb 2019 12:32:47 +0100
>>> Magnus Karlsson <magnus.karlsson@gmail.com> wrote:
>>>> On Mon, Feb 11, 2019 at 9:44 PM Jonathan Lemon <jonathan.lemon@gmail.com> wrote:
>>>>> On 8 Feb 2019, at 5:05, Magnus Karlsson wrote:
>>>>>
>>>>>> This patch proposes to add AF_XDP support to libbpf. The main reason
>>>>>> for this is to facilitate writing applications that use AF_XDP by
>>>>>> offering higher-level APIs that hide many of the details of the AF_XDP
>>>>>> uapi. This is in the same vein as libbpf facilitates XDP adoption by
>>>>>> offering easy-to-use higher level interfaces of XDP
>>>>>> functionality. Hopefully this will facilitate adoption of AF_XDP, make
>>>>>> applications using it simpler and smaller, and finally also make it
>>>>>> possible for applications to benefit from optimizations in the AF_XDP
>>>>>> user space access code. Previously, people just copied and pasted the
>>>>>> code from the sample application into their application, which is not
>>>>>> desirable.
>>>>>
>>>>> I like the idea of encapsulating the boilerplate logic in a library.
>>>>>
>>>>> I do think there is an important missing piece though - there should be
>>>>> some code which queries the netdev for how many queues are attached, and
>>>>> create the appropriate number of umem/AF_XDP sockets.
>>>>>
>>>>> I ran into this issue when testing the current AF_XDP code - on my test
>>>>> boxes, the mlx5 card has 55 channels (aka queues), so when the test program
>>>>> binds only to channel 0, nothing works as expected, since not all traffic
>>>>> is being intercepted.  While obvious in hindsight, this took a while to
>>>>> track down.
>>>>
>>>> Yes, agreed. You are not the first one to stumble upon this problem
>>>> :-). Let me think a little bit on how to solve this in a good way. We
>>>> need this to be simple and intuitive, as you say.
>>>
>>> I see people hitting this with AF_XDP all the time... I had some
>>> backup-slides[2] in our FOSDEM presentation[1] that describe the issue,
>>> give the performance reason why and propose a workaround.
>>
>> Magnus, I presume you're going to address this for the initial libbpf merge
>> since the plan is to make it easier to consume for users?
> 
> I think the first thing we need is education and documentation. Have a
> FAQ or "common mistakes" section in the Documentation. And of course,
> sending Jesper around the world reminding people about this ;-).
> 
> To address this on a libbpf interface level, I think the best way is
> to reprogram the NIC to send all traffic to the queue that you
> provided in the xsk_socket__create call. This "set up NIC routing"
> behavior can then be disable with a flag, just as the XDP program
> loading can be disabled. The standard config of xsk_socket__create
> will then set up as many things for the user as possible just to get
> up and running quickly. More advanced users can then disable parts of
> it to gain more flexibility. Does this sound OK? Do not want to go the
> route of polling multiple sockets and aggregating the traffic as this
> will have significant negative performance implications.

I think that is fine, I would probably make this one a dedicated API call
in order to have some more flexibility than just simple flag. E.g. once
nfp AF_XDP support lands at some point, I could imagine that this call
resp. a drop-in replacement API call for more advanced steering could
also take an offloaded BPF prog fd, for example, which then would program
the steering on the NIC [0]. Seems at least there's enough complexity on
its own to have a dedicated API for it. Thoughts?

Thanks,
Daniel

  [0] https://patchwork.ozlabs.org/cover/910614/

^ permalink raw reply	[flat|nested] 17+ messages in thread

* Re: [PATCH bpf-next v4 0/2] libbpf: adding AF_XDP support
  2019-02-18  9:38           ` Daniel Borkmann
@ 2019-02-18 10:09             ` Magnus Karlsson
  0 siblings, 0 replies; 17+ messages in thread
From: Magnus Karlsson @ 2019-02-18 10:09 UTC (permalink / raw)
  To: Daniel Borkmann
  Cc: Jesper Dangaard Brouer, Jonathan Lemon, Magnus Karlsson,
	Björn Töpel, ast, Network Development, Jakub Kicinski,
	Björn Töpel, Zhang, Qi Z, xiaolong.ye, xdp-newbies

On Mon, Feb 18, 2019 at 10:38 AM Daniel Borkmann <daniel@iogearbox.net> wrote:
>
> On 02/18/2019 09:20 AM, Magnus Karlsson wrote:
> > On Fri, Feb 15, 2019 at 5:48 PM Daniel Borkmann <daniel@iogearbox.net> wrote:
> >>
> >> On 02/13/2019 12:55 PM, Jesper Dangaard Brouer wrote:
> >>> On Wed, 13 Feb 2019 12:32:47 +0100
> >>> Magnus Karlsson <magnus.karlsson@gmail.com> wrote:
> >>>> On Mon, Feb 11, 2019 at 9:44 PM Jonathan Lemon <jonathan.lemon@gmail.com> wrote:
> >>>>> On 8 Feb 2019, at 5:05, Magnus Karlsson wrote:
> >>>>>
> >>>>>> This patch proposes to add AF_XDP support to libbpf. The main reason
> >>>>>> for this is to facilitate writing applications that use AF_XDP by
> >>>>>> offering higher-level APIs that hide many of the details of the AF_XDP
> >>>>>> uapi. This is in the same vein as libbpf facilitates XDP adoption by
> >>>>>> offering easy-to-use higher level interfaces of XDP
> >>>>>> functionality. Hopefully this will facilitate adoption of AF_XDP, make
> >>>>>> applications using it simpler and smaller, and finally also make it
> >>>>>> possible for applications to benefit from optimizations in the AF_XDP
> >>>>>> user space access code. Previously, people just copied and pasted the
> >>>>>> code from the sample application into their application, which is not
> >>>>>> desirable.
> >>>>>
> >>>>> I like the idea of encapsulating the boilerplate logic in a library.
> >>>>>
> >>>>> I do think there is an important missing piece though - there should be
> >>>>> some code which queries the netdev for how many queues are attached, and
> >>>>> create the appropriate number of umem/AF_XDP sockets.
> >>>>>
> >>>>> I ran into this issue when testing the current AF_XDP code - on my test
> >>>>> boxes, the mlx5 card has 55 channels (aka queues), so when the test program
> >>>>> binds only to channel 0, nothing works as expected, since not all traffic
> >>>>> is being intercepted.  While obvious in hindsight, this took a while to
> >>>>> track down.
> >>>>
> >>>> Yes, agreed. You are not the first one to stumble upon this problem
> >>>> :-). Let me think a little bit on how to solve this in a good way. We
> >>>> need this to be simple and intuitive, as you say.
> >>>
> >>> I see people hitting this with AF_XDP all the time... I had some
> >>> backup-slides[2] in our FOSDEM presentation[1] that describe the issue,
> >>> give the performance reason why and propose a workaround.
> >>
> >> Magnus, I presume you're going to address this for the initial libbpf merge
> >> since the plan is to make it easier to consume for users?
> >
> > I think the first thing we need is education and documentation. Have a
> > FAQ or "common mistakes" section in the Documentation. And of course,
> > sending Jesper around the world reminding people about this ;-).
> >
> > To address this on a libbpf interface level, I think the best way is
> > to reprogram the NIC to send all traffic to the queue that you
> > provided in the xsk_socket__create call. This "set up NIC routing"
> > behavior can then be disable with a flag, just as the XDP program
> > loading can be disabled. The standard config of xsk_socket__create
> > will then set up as many things for the user as possible just to get
> > up and running quickly. More advanced users can then disable parts of
> > it to gain more flexibility. Does this sound OK? Do not want to go the
> > route of polling multiple sockets and aggregating the traffic as this
> > will have significant negative performance implications.
>
> I think that is fine, I would probably make this one a dedicated API call
> in order to have some more flexibility than just simple flag. E.g. once
> nfp AF_XDP support lands at some point, I could imagine that this call
> resp. a drop-in replacement API call for more advanced steering could
> also take an offloaded BPF prog fd, for example, which then would program
> the steering on the NIC [0]. Seems at least there's enough complexity on
> its own to have a dedicated API for it. Thoughts?

I agree that there is probably enough complexity to warrant adding a
higher level API to deal with this problem (flow steering). But there
are likely a number of cases we have not thought that would complicate
it even further. This is why I suggest that this functionality should
be in its own patch set that I can devote some time and thought to.
IMO, the current patch set and functionality does already lower the
bar of entry significantly and has a value even without hiding or
controlling the steering of traffic. What I would like to do in this
patch set is to add a FAQ section in
Documentation/networking/af_xdp.rst explaining this problem. Something
like: "Q: Why am I not seeing any traffic? A: Check these four
things.....". Could add some text in the libbpf README referring to
this document also. Opinions?

Thanks: Magnus

> Thanks,
> Daniel
>
>   [0] https://patchwork.ozlabs.org/cover/910614/

^ permalink raw reply	[flat|nested] 17+ messages in thread

* Re: [PATCH bpf-next v4 1/2] libbpf: add support for using AF_XDP sockets
  2019-02-18  8:59     ` Magnus Karlsson
@ 2019-02-18 11:21       ` Maciej Fijalkowski
  0 siblings, 0 replies; 17+ messages in thread
From: Maciej Fijalkowski @ 2019-02-18 11:21 UTC (permalink / raw)
  To: Magnus Karlsson
  Cc: Daniel Borkmann, Magnus Karlsson, Björn Töpel, ast,
	Network Development, Jakub Kicinski, Björn Töpel,
	Zhang, Qi Z, Jesper Dangaard Brouer, xiaolong.ye

On Mon, 18 Feb 2019 09:59:30 +0100
Magnus Karlsson <magnus.karlsson@gmail.com> wrote:

> On Fri, Feb 15, 2019 at 6:09 PM Daniel Borkmann <daniel@iogearbox.net> wrote:
> >
> > On 02/08/2019 02:05 PM, Magnus Karlsson wrote:  
> > > This commit adds AF_XDP support to libbpf. The main reason for this is
> > > to facilitate writing applications that use AF_XDP by offering
> > > higher-level APIs that hide many of the details of the AF_XDP
> > > uapi. This is in the same vein as libbpf facilitates XDP adoption by
> > > offering easy-to-use higher level interfaces of XDP
> > > functionality. Hopefully this will facilitate adoption of AF_XDP, make
> > > applications using it simpler and smaller, and finally also make it
> > > possible for applications to benefit from optimizations in the AF_XDP
> > > user space access code. Previously, people just copied and pasted the
> > > code from the sample application into their application, which is not
> > > desirable.
> > >
> > > The interface is composed of two parts:
> > >
> > > * Low-level access interface to the four rings and the packet
> > > * High-level control plane interface for creating and setting
> > >   up umems and af_xdp sockets as well as a simple XDP program.
> > >
> > > Tested-by: Björn Töpel <bjorn.topel@intel.com>
> > > Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>  
> > [...]  
> > > diff --git a/tools/lib/bpf/xsk.c b/tools/lib/bpf/xsk.c
> > > new file mode 100644
> > > index 0000000..a982a76
> > > --- /dev/null
> > > +++ b/tools/lib/bpf/xsk.c
> > > @@ -0,0 +1,742 @@
> > > +// SPDX-License-Identifier: (LGPL-2.1 OR BSD-2-Clause)
> > > +
> > > +/*
> > > + * AF_XDP user-space access library.
> > > + *
> > > + * Copyright(c) 2018 - 2019 Intel Corporation.
> > > + *
> > > + * Author(s): Magnus Karlsson <magnus.karlsson@intel.com>
> > > + */
> > > +
> > > +#include <errno.h>
> > > +#include <stdlib.h>
> > > +#include <string.h>
> > > +#include <unistd.h>
> > > +#include <arpa/inet.h>
> > > +#include <asm/barrier.h>
> > > +#include <linux/compiler.h>
> > > +#include <linux/filter.h>
> > > +#include <linux/if_ether.h>
> > > +#include <linux/if_link.h>
> > > +#include <linux/if_packet.h>
> > > +#include <linux/if_xdp.h>
> > > +#include <linux/rtnetlink.h>
> > > +#include <net/if.h>
> > > +#include <sys/mman.h>
> > > +#include <sys/socket.h>
> > > +#include <sys/types.h>
> > > +
> > > +#include "bpf.h"
> > > +#include "libbpf.h"
> > > +#include "libbpf_util.h"
> > > +#include "nlattr.h"
> > > +#include "xsk.h"
> > > +
> > > +#ifndef SOL_XDP
> > > + #define SOL_XDP 283
> > > +#endif
> > > +
> > > +#ifndef AF_XDP
> > > + #define AF_XDP 44
> > > +#endif
> > > +
> > > +#ifndef PF_XDP
> > > + #define PF_XDP AF_XDP
> > > +#endif
> > > +
> > > +struct xsk_umem {
> > > +     struct xsk_ring_prod *fill;
> > > +     struct xsk_ring_cons *comp;
> > > +     char *umem_area;
> > > +     struct xsk_umem_config config;
> > > +     int fd;
> > > +     int refcount;
> > > +};
> > > +
> > > +struct xsk_socket {
> > > +     struct xsk_ring_cons *rx;
> > > +     struct xsk_ring_prod *tx;
> > > +     __u64 outstanding_tx;
> > > +     struct xsk_umem *umem;
> > > +     struct xsk_socket_config config;
> > > +     int fd;
> > > +     int xsks_map;
> > > +     int ifindex;
> > > +     int prog_fd;
> > > +     int qidconf_map_fd;
> > > +     int xsks_map_fd;
> > > +     __u32 queue_id;
> > > +};
> > > +
> > > +struct xsk_nl_info {
> > > +     bool xdp_prog_attached;
> > > +     int ifindex;
> > > +     int fd;
> > > +};
> > > +
> > > +#define MAX_QUEUES 128  
> >
> > Why is this a fixed constant here, shouldn't this be dynamic due to being NIC
> > specific anyway?  
> 
> It was only here for simplicity. If a NIC had more queues, it would
> require a recompile of the lib. Obviously, not desirable in a distro.
> What I could do is to read the max "combined" queues (pre-set maximum
> in the ethtool output) from the same interface as ethool uses and size
> the array after that. Or is there a simpler way? What to do if the NIC
> does not have a "combined", or is there no such NIC (seems the common
> HW ones set this)?
> 
> > [...]  
> > > +void *xsk_umem__get_data(struct xsk_umem *umem, __u64 addr)
> > > +{
> > > +     return &((char *)(umem->umem_area))[addr];
> > > +}  
> >
> > There's also a xsk_umem__get_data_raw() doing the same. Why having both, resp.
> > when to choose which? ;)  
> 
> There is enough to have the xsk_umem__get_data_raw() function.
> xsk_umem__get_data() is just a convenience function for which the
> application does not have to store the beginning of the umem. But as
> the application always has to provide this anyway in the
> xsk_umem__create() function, it might as well store this pointer. I
> will delete xsk_umem__get_data() and rename xsk_umem__get_data_raw()
> to xsk_umem__get_data().
> 
> > > +int xsk_umem__fd(const struct xsk_umem *umem)
> > > +{
> > > +     return umem ? umem->fd : -EINVAL;
> > > +}
> > > +
> > > +int xsk_socket__fd(const struct xsk_socket *xsk)
> > > +{
> > > +     return xsk ? xsk->fd : -EINVAL;
> > > +}
> > > +
> > > +static bool xsk_page_aligned(void *buffer)
> > > +{
> > > +     unsigned long addr = (unsigned long)buffer;
> > > +
> > > +     return !(addr & (getpagesize() - 1));
> > > +}
> > > +
> > > +static void xsk_set_umem_config(struct xsk_umem_config *cfg,
> > > +                             const struct xsk_umem_config *usr_cfg)
> > > +{
> > > +     if (!usr_cfg) {
> > > +             cfg->fill_size = XSK_RING_PROD__DEFAULT_NUM_DESCS;
> > > +             cfg->comp_size = XSK_RING_CONS__DEFAULT_NUM_DESCS;
> > > +             cfg->frame_size = XSK_UMEM__DEFAULT_FRAME_SIZE;
> > > +             cfg->frame_headroom = XSK_UMEM__DEFAULT_FRAME_HEADROOM;
> > > +             return;
> > > +     }
> > > +
> > > +     cfg->fill_size = usr_cfg->fill_size;
> > > +     cfg->comp_size = usr_cfg->comp_size;
> > > +     cfg->frame_size = usr_cfg->frame_size;
> > > +     cfg->frame_headroom = usr_cfg->frame_headroom;  
> >
> > Just optional nit, might be a bit nicer to have it in this form:
> >
> >         cfg->fill_size = usr_cfg ? usr_cfg->fill_size :
> >                          XSK_RING_PROD__DEFAULT_NUM_DESCS;  
> 
> I actually think the current form is clearer when there are multiple
> lines. If there was only one line, I would agree with you.
> 
> > > +}
> > > +
> > > +static void xsk_set_xdp_socket_config(struct xsk_socket_config *cfg,
> > > +                                   const struct xsk_socket_config *usr_cfg)
> > > +{
> > > +     if (!usr_cfg) {
> > > +             cfg->rx_size = XSK_RING_CONS__DEFAULT_NUM_DESCS;
> > > +             cfg->tx_size = XSK_RING_PROD__DEFAULT_NUM_DESCS;
> > > +             cfg->libbpf_flags = 0;
> > > +             cfg->xdp_flags = 0;
> > > +             cfg->bind_flags = 0;
> > > +             return;
> > > +     }
> > > +
> > > +     cfg->rx_size = usr_cfg->rx_size;
> > > +     cfg->tx_size = usr_cfg->tx_size;
> > > +     cfg->libbpf_flags = usr_cfg->libbpf_flags;
> > > +     cfg->xdp_flags = usr_cfg->xdp_flags;
> > > +     cfg->bind_flags = usr_cfg->bind_flags;  
> >
> > (Ditto)
> >  
> > > +}
> > > +
> > > +int xsk_umem__create(struct xsk_umem **umem_ptr, void *umem_area, __u64 size,
> > > +                  struct xsk_ring_prod *fill, struct xsk_ring_cons *comp,
> > > +                  const struct xsk_umem_config *usr_config)
> > > +{
> > > +     struct xdp_mmap_offsets off;
> > > +     struct xdp_umem_reg mr;
> > > +     struct xsk_umem *umem;
> > > +     socklen_t optlen;
> > > +     void *map;
> > > +     int err;
> > > +
> > > +     if (!umem_area || !umem_ptr || !fill || !comp)
> > > +             return -EFAULT;
> > > +     if (!size && !xsk_page_aligned(umem_area))
> > > +             return -EINVAL;
> > > +
> > > +     umem = calloc(1, sizeof(*umem));
> > > +     if (!umem)
> > > +             return -ENOMEM;
> > > +
> > > +     umem->fd = socket(AF_XDP, SOCK_RAW, 0);
> > > +     if (umem->fd < 0) {
> > > +             err = -errno;
> > > +             goto out_umem_alloc;
> > > +     }
> > > +
> > > +     umem->umem_area = umem_area;
> > > +     xsk_set_umem_config(&umem->config, usr_config);
> > > +
> > > +     mr.addr = (uintptr_t)umem_area;
> > > +     mr.len = size;
> > > +     mr.chunk_size = umem->config.frame_size;
> > > +     mr.headroom = umem->config.frame_headroom;
> > > +
> > > +     err = setsockopt(umem->fd, SOL_XDP, XDP_UMEM_REG, &mr, sizeof(mr));
> > > +     if (err) {
> > > +             err = -errno;
> > > +             goto out_socket;
> > > +     }
> > > +     err = setsockopt(umem->fd, SOL_XDP, XDP_UMEM_FILL_RING,
> > > +                      &umem->config.fill_size,
> > > +                      sizeof(umem->config.fill_size));
> > > +     if (err) {
> > > +             err = -errno;
> > > +             goto out_socket;
> > > +     }
> > > +     err = setsockopt(umem->fd, SOL_XDP, XDP_UMEM_COMPLETION_RING,
> > > +                      &umem->config.comp_size,
> > > +                      sizeof(umem->config.comp_size));
> > > +     if (err) {
> > > +             err = -errno;
> > > +             goto out_socket;
> > > +     }
> > > +
> > > +     optlen = sizeof(off);
> > > +     err = getsockopt(umem->fd, SOL_XDP, XDP_MMAP_OFFSETS, &off, &optlen);
> > > +     if (err) {
> > > +             err = -errno;
> > > +             goto out_socket;
> > > +     }
> > > +
> > > +     map = xsk_mmap(NULL, off.fr.desc +
> > > +                    umem->config.fill_size * sizeof(__u64),
> > > +                    PROT_READ | PROT_WRITE, MAP_SHARED | MAP_POPULATE,
> > > +                    umem->fd, XDP_UMEM_PGOFF_FILL_RING);
> > > +     if (map == MAP_FAILED) {
> > > +             err = -errno;
> > > +             goto out_socket;
> > > +     }
> > > +
> > > +     umem->fill = fill;
> > > +     fill->mask = umem->config.fill_size - 1;
> > > +     fill->size = umem->config.fill_size;
> > > +     fill->producer = map + off.fr.producer;
> > > +     fill->consumer = map + off.fr.consumer;
> > > +     fill->ring = map + off.fr.desc;
> > > +     fill->cached_cons = umem->config.fill_size;
> > > +
> > > +     map = xsk_mmap(NULL,
> > > +                    off.cr.desc + umem->config.comp_size * sizeof(__u64),
> > > +                    PROT_READ | PROT_WRITE, MAP_SHARED | MAP_POPULATE,
> > > +                    umem->fd, XDP_UMEM_PGOFF_COMPLETION_RING);
> > > +     if (map == MAP_FAILED) {
> > > +             err = -errno;
> > > +             goto out_mmap;
> > > +     }
> > > +
> > > +     umem->comp = comp;
> > > +     comp->mask = umem->config.comp_size - 1;
> > > +     comp->size = umem->config.comp_size;
> > > +     comp->producer = map + off.cr.producer;
> > > +     comp->consumer = map + off.cr.consumer;
> > > +     comp->ring = map + off.cr.desc;
> > > +
> > > +     *umem_ptr = umem;
> > > +     return 0;
> > > +
> > > +out_mmap:
> > > +     munmap(umem->fill,
> > > +            off.fr.desc + umem->config.fill_size * sizeof(__u64));
> > > +out_socket:
> > > +     close(umem->fd);
> > > +out_umem_alloc:
> > > +     free(umem);
> > > +     return err;
> > > +}
> > > +
> > > +static int xsk_parse_nl(void *cookie, void *msg, struct nlattr **tb)
> > > +{
> > > +     struct nlattr *tb_parsed[IFLA_XDP_MAX + 1];
> > > +     struct xsk_nl_info *nl_info = cookie;
> > > +     struct ifinfomsg *ifinfo = msg;
> > > +     unsigned char mode;
> > > +     int err;
> > > +
> > > +     if (nl_info->ifindex && nl_info->ifindex != ifinfo->ifi_index)
> > > +             return 0;
> > > +
> > > +     if (!tb[IFLA_XDP])
> > > +             return 0;
> > > +
> > > +     err = libbpf_nla_parse_nested(tb_parsed, IFLA_XDP_MAX, tb[IFLA_XDP],
> > > +                                   NULL);
> > > +     if (err)
> > > +             return err;
> > > +
> > > +     if (!tb_parsed[IFLA_XDP_ATTACHED] || !tb_parsed[IFLA_XDP_FD])
> > > +             return 0;
> > > +
> > > +     mode = libbpf_nla_getattr_u8(tb_parsed[IFLA_XDP_ATTACHED]);
> > > +     if (mode == XDP_ATTACHED_NONE)
> > > +             return 0;
> > > +
> > > +     nl_info->xdp_prog_attached = true;
> > > +     nl_info->fd = libbpf_nla_getattr_u32(tb_parsed[IFLA_XDP_FD]);  
> >
> > Hm, I don't think this works if I read the intention of this helper correctly.
> >
> > IFLA_XDP_FD is never set for retrieving the prog from the kernel. So the
> > above is a bug.
> >
> > We also have bpf_get_link_xdp_id(). This should probably just be reused in
> > this context here.  
> 
> If bpf_get_link_xdp_id() will fit my bill, I will happily use it. I
> will check it out and hopefully I can drop all this code. Thanks.
>
I see that all you need to know is whether there's already attached XDP program
to xsk socket's related interface, no?
If so, then within the xsk_setup_xdp_prog, you could do something like:

	u32 prog_id = 0;

	bpf_get_link_xdp_id(xsk->ifindex, &prog_id, xsk->config.xdp_flags);
	if (!prog_id) {
		// create maps
		// load xdp prog
	} else {
		xsk->fd = prog_id;
	}

	xsk_update_bpf_maps(xsk, true, xsk->fd);

If that's ok then xsk_xdp_prog_attached and xsk_parse_nl could be dropped.

> > > +     return 0;
> > > +}
> > > +
> > > +static bool xsk_xdp_prog_attached(struct xsk_socket *xsk)
> > > +{
> > > +     struct xsk_nl_info nl_info;
> > > +     unsigned int nl_pid;
> > > +     char err_buf[256];
> > > +     int sock, err;
> > > +
> > > +     sock = libbpf_netlink_open(&nl_pid);
> > > +     if (sock < 0)
> > > +             return false;
> > > +
> > > +     nl_info.xdp_prog_attached = false;
> > > +     nl_info.ifindex = xsk->ifindex;
> > > +     nl_info.fd = -1;
> > > +
> > > +     err = libbpf_nl_get_link(sock, nl_pid, xsk_parse_nl, &nl_info);
> > > +     if (err) {
> > > +             libbpf_strerror(err, err_buf, sizeof(err_buf));
> > > +             pr_warning("Error:\n%s\n", err_buf);
> > > +             close(sock);
> > > +             return false;
> > > +     }
> > > +
> > > +     close(sock);
> > > +     xsk->prog_fd = nl_info.fd;
> > > +     return nl_info.xdp_prog_attached;
> > > +}  
> >
> > (See bpf_get_link_xdp_id().)
> >  
> > > +
> > > +static int xsk_load_xdp_prog(struct xsk_socket *xsk)
> > > +{
> > > +     char bpf_log_buf[BPF_LOG_BUF_SIZE];
> > > +     int err, prog_fd;
> > > +
> > > +     /* This is the C-program:
> > > +      * SEC("xdp_sock") int xdp_sock_prog(struct xdp_md *ctx)
> > > +      * {
> > > +      *     int *qidconf, index = ctx->rx_queue_index;  
> > [...]  
> > > +
> > > +int xsk_socket__create(struct xsk_socket **xsk_ptr, const char *ifname,
> > > +                    __u32 queue_id, struct xsk_umem *umem,
> > > +                    struct xsk_ring_cons *rx, struct xsk_ring_prod *tx,
> > > +                    const struct xsk_socket_config *usr_config)
> > > +{
> > > +     struct sockaddr_xdp sxdp = {};
> > > +     struct xdp_mmap_offsets off;
> > > +     struct xsk_socket *xsk;
> > > +     socklen_t optlen;
> > > +     void *map;
> > > +     int err;
> > > +
> > > +     if (!umem || !xsk_ptr || !rx || !tx)
> > > +             return -EFAULT;
> > > +
> > > +     if (umem->refcount) {
> > > +             pr_warning("Error: shared umems not supported by libbpf.\n");
> > > +             return -EBUSY;
> > > +     }
> > > +
> > > +     xsk = calloc(1, sizeof(*xsk));
> > > +     if (!xsk)
> > > +             return -ENOMEM;
> > > +
> > > +     if (umem->refcount++ > 0) {  
> >
> > Should this refcount rather be atomic actually?  
> 
> Neither our config nor data plane interfaces are reentrant for
> performance reasons. Any concurrency has to be handled explicitly on
> the application level. This so that it only penalizes apps that really
> need this.
> 
> Thanks for all your reviews: Magnus
> 
> > > +             xsk->fd = socket(AF_XDP, SOCK_RAW, 0);
> > > +             if (xsk->fd < 0) {
> > > +                     err = -errno;
> > > +                     goto out_xsk_alloc;
> > > +             }
> > > +     } else {
> > > +             xsk->fd = umem->fd;
> > > +     }
> > > +
> > > +     xsk->outstanding_tx = 0;
> > > +     xsk->queue_id = queue_id;
> > > +     xsk->umem = umem;
> > > +     xsk->ifindex = if_nametoindex(ifname);
> > > +     if (!xsk->ifindex) {
> > > +             err = -errno;
> > > +             goto out_socket;
> > > +     }
> > > +
> > > +     xsk_set_xdp_socket_config(&xsk->config, usr_config);  
> > [...]  


^ permalink raw reply	[flat|nested] 17+ messages in thread

end of thread, other threads:[~2019-02-18 11:21 UTC | newest]

Thread overview: 17+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-02-08 13:05 [PATCH bpf-next v4 0/2] libbpf: adding AF_XDP support Magnus Karlsson
2019-02-08 13:05 ` [PATCH bpf-next v4 1/2] libbpf: add support for using AF_XDP sockets Magnus Karlsson
2019-02-15 16:37   ` Daniel Borkmann
2019-02-18  8:59     ` Magnus Karlsson
2019-02-18 11:21       ` Maciej Fijalkowski
2019-02-08 13:05 ` [PATCH bpf-next v4 2/2] samples/bpf: convert xdpsock to use libbpf for AF_XDP access Magnus Karlsson
2019-02-11  6:33 ` [PATCH bpf-next v4 0/2] libbpf: adding AF_XDP support Jean-Mickael Guerin
2019-02-11  7:52   ` Magnus Karlsson
2019-02-11 19:48 ` Jonathan Lemon
2019-02-13 11:32   ` Magnus Karlsson
2019-02-13 11:55     ` Jesper Dangaard Brouer
2019-02-15 16:20       ` Daniel Borkmann
2019-02-18  8:20         ` Magnus Karlsson
2019-02-18  9:38           ` Daniel Borkmann
2019-02-18 10:09             ` Magnus Karlsson
2019-02-13 20:49     ` Jonathan Lemon
2019-02-14  8:25       ` Magnus Karlsson

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).