From mboxrd@z Thu Jan 1 00:00:00 1970 From: Kristian Evensen Subject: Re: [PATCH] net: qmi_wwan: MC73xx interface 10 is not QMI Date: Mon, 9 Feb 2015 15:30:02 +0100 Message-ID: References: <1423477027-10869-1-git-send-email-kristian.evensen@gmail.com> <87a90nqp45.fsf@nemi.mork.no> <8761bbqker.fsf@nemi.mork.no> Mime-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: QUOTED-PRINTABLE Cc: Network Development , Aleksander Morgado To: =?UTF-8?Q?Bj=C3=B8rn_Mork?= Return-path: Received: from mail-yh0-f46.google.com ([209.85.213.46]:46723 "EHLO mail-yh0-f46.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S932375AbbBIOaD convert rfc822-to-8bit (ORCPT ); Mon, 9 Feb 2015 09:30:03 -0500 Received: by mail-yh0-f46.google.com with SMTP id z6so1529948yhz.5 for ; Mon, 09 Feb 2015 06:30:02 -0800 (PST) In-Reply-To: <8761bbqker.fsf@nemi.mork.no> Sender: netdev-owner@vger.kernel.org List-ID: On Mon, Feb 9, 2015 at 2:33 PM, Bj=C3=B8rn Mork wrote: > That is pretty old relative to this hardware. First commercial releas= e? > I don't really want to push you to do an upgrade, but it would sure b= e > nice to have this test repeated on a recent firmware version. Not th= at > I can spot anything particularily promising in the release notes. I updated firmware now, but still see the same behavior. > I did find our previous discussions about these two RMNET1 and RMNET2 > functions, e.g: > http://lists.freedesktop.org/archives/libqmi-devel/2014-July/000875.h= tml > and it seems to indicate that both work as long as you configure them > for 802.3 framing. But that could just be an information feedback > loop... That is correct. In order for this device to accept network traffic (or driver to accept packets from device), I have to set the transfer mode to 802.3. -Kristian