From: Rob Herring <robherring2-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
To: Jonas Jensen <jonas.jensen-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Cc: netdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Florian Fainelli
<f.fainelli-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
"linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org"
<linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
Ben Hutchings
<bhutchings-s/n/eUQHGBpZroRs9YW3xA@public.gmane.org>,
David Miller <davem-fT/PcQaiUtIeIZ0/mPfg9Q@public.gmane.org>,
"linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org"
<linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org>,
"devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org"
<devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>
Subject: Re: [PATCH v3 3/7] net: moxa: connect to PHY
Date: Mon, 20 Jan 2014 08:57:53 -0600 [thread overview]
Message-ID: <CAL_JsqKs-snsRaD1JQRVUrg+WBDd9cYxPhtfKf9m5HeJ6df3Pw@mail.gmail.com> (raw)
In-Reply-To: <1390216399-27028-3-git-send-email-jonas.jensen-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
On Mon, Jan 20, 2014 at 5:13 AM, Jonas Jensen <jonas.jensen-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> wrote:
> The kernel now has a MDIO bus driver and a phy_driver (RTL8201CP),
> connect to this PHY using OF.
>
> Signed-off-by: Jonas Jensen <jonas.jensen-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> ---
>
> Notes:
> Applies to next-20140120
>
> .../devicetree/bindings/net/moxa,moxart-mac.txt | 47 ++++++++++-
> drivers/net/ethernet/moxa/moxart_ether.c | 92 +++++++++++++++++++++-
> drivers/net/ethernet/moxa/moxart_ether.h | 2 +
> 3 files changed, 138 insertions(+), 3 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/net/moxa,moxart-mac.txt b/Documentation/devicetree/bindings/net/moxa,moxart-mac.txt
> index 583418b..94c1f3b 100644
> --- a/Documentation/devicetree/bindings/net/moxa,moxart-mac.txt
> +++ b/Documentation/devicetree/bindings/net/moxa,moxart-mac.txt
> @@ -1,21 +1,64 @@
> MOXA ART Ethernet Controller
>
> +Integrated MDIO bus node:
> +
> +- compatible: "moxa,moxart-mdio"
> +- Inherits from MDIO bus node binding[1]
> +
> +[1] Documentation/devicetree/bindings/net/phy.txt
> +
> +
> +Ethernet node:
> +
> Required properties:
>
> - compatible : Must be "moxa,moxart-mac"
> - reg : Should contain register location and length
> - interrupts : Should contain the mac interrupt number
>
> +Optional Properties:
> +
> +- phy-handle : the phandle to a PHY node
> +
> +
> Example:
>
> + mdio0: mdio@90900090 {
> + compatible = "moxa,moxart-mdio";
> + reg = <0x90900090 0x8>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + ethphy0: ethernet-phy@1 {
> + device_type = "ethernet-phy";
Drop this. device_type is only for real OpenFirmware.
> + compatible = "moxa,moxart-rtl8201cp", "ethernet-phy-ieee802.3-c22";
> + reg = <1>;
> + };
> + };
> +
> + mdio1: mdio@92000090 {
> + compatible = "moxa,moxart-mdio";
> + reg = <0x92000090 0x8>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + ethphy1: ethernet-phy@1 {
> + device_type = "ethernet-phy";
> + compatible = "moxa,moxart-rtl8201cp", "ethernet-phy-ieee802.3-c22";
> + reg = <1>;
> + };
> + };
> +
> mac0: mac@90900000 {
Not part of this patch, but this should really be ethernet@...
> compatible = "moxa,moxart-mac";
> - reg = <0x90900000 0x100>;
> + reg = <0x90900000 0x90>;
> interrupts = <25 0>;
> + phy-handle = <ðphy0>;
> };
>
> mac1: mac@92000000 {
> compatible = "moxa,moxart-mac";
> - reg = <0x92000000 0x100>;
> + reg = <0x92000000 0x90>;
> interrupts = <27 0>;
> + phy-handle = <ðphy1>;
> };
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2014-01-20 14:57 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-01-20 11:13 [PATCH v3 1/7] net: moxa: clear TX descriptor length bits between sends Jonas Jensen
2014-01-20 11:13 ` [PATCH v3 2/7] net: moxa: fix build_skb() memory corruption Jonas Jensen
2014-01-20 11:13 ` [PATCH v3 3/7] net: moxa: connect to PHY Jonas Jensen
[not found] ` <1390216399-27028-3-git-send-email-jonas.jensen-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2014-01-20 14:57 ` Rob Herring [this message]
2014-01-21 13:50 ` Jonas Jensen
2014-01-20 11:13 ` [PATCH v3 4/7] net: moxa: add ethtool support Jonas Jensen
2014-01-20 11:13 ` [PATCH v3 5/7] net: moxa: add IFF_LIVE_ADDR_CHANGE flag Jonas Jensen
2014-01-20 11:13 ` [PATCH v3 6/7] net: moxa: generate random address Jonas Jensen
2014-01-20 11:13 ` [PATCH v3 7/7] net: moxa: use eth_mac_addr() Jonas Jensen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CAL_JsqKs-snsRaD1JQRVUrg+WBDd9cYxPhtfKf9m5HeJ6df3Pw@mail.gmail.com \
--to=robherring2-re5jqeeqqe8avxtiumwx3w@public.gmane.org \
--cc=bhutchings-s/n/eUQHGBpZroRs9YW3xA@public.gmane.org \
--cc=davem-fT/PcQaiUtIeIZ0/mPfg9Q@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=f.fainelli-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=jonas.jensen-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=netdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).